Related
Hi there,
i have installed Finster869's WM6_RemoteDesktop.cab, which is available somewhere in the forum here.
Can anyone tell me if it is possible to set some advanced options, which are normally shown in the regular remote desktop application for Windows Desktop OS's?
- Display: Remote Desktop Size
- Experience (Desktop background, Menu animation, themes)
Thanks
Chris
I'm curious how to set these too. 640x480 seems to get forced when I connect, making Outlook unusable.
Yeah, me too. There's a file default.rdp where you can amend the value of the resolution but somehow it doesnt take effect.
I end up using VNC Viewer though.
Hi, if there's just another Remote Desktop Client allowing to fit my needs - I'd use it.
What are the best Clients (also commercial)? Where can I get that VNC Viewer?
Chris
charmless said:
Yeah, me too. There's a file default.rdp where you can amend the value of the resolution but somehow it doesnt take effect.
I end up using VNC Viewer though.
Click to expand...
Click to collapse
http://dotnetvnc.sourceforge.net/
Got another question though - Is it possible to connect to a WM2003 server console through Finster869's RDP client?
Logmein
Another option is logmein free. They have a plugin for WM that works on the Kaiser I have from ATT. Allows me to set resloution, screen size, etc, and it's free.
im too looking for a way to get remote desktop mobile to set a custom resolution
because in small resolution on wm6 rdm it just hard for me to navigate stuff.
can someone find a hack for this please.. dear hackers out there thanks.
Need a little help here....i've 4 computers in the house and it's all running VNC Server Enterprise Edition 4.2.2. I've downloaded VNC Viewer from the link above and run it on my Kaiser but when try to connect, it says "Unable to connect to the specified server!". I'm not sure what to set as i'm just bad with these network stuff.
Assuming i want to connect to my computer A name "Desktop". I would assume i just input the name Desktop to "Server" in the program and put in the password right? Or am i just so lost
Hope somebody can kindly guide me on this. Appreciate it.
Anybody? Would love to get it working in my TyTN II & i have up to 4 computers to remote into
Are you trying to get into them from the Internet or are you on your WiFi network?
If you are on your WiFi you will need to know the IP address of the machine you are connecting to unless you have DNS setup internally. Not sure if WM6 by default will detect Windows names.
If you are coming from the Internet then you will need to port forward your to each of your machines.
Guys, as usual, Wiki is your best friend. Do search it before asking - I've answered almost all the questions asked in this thread in the Remote Desktop Access Bible at http://wiki.xda-developers.com/index.php?pagename=Access your desktop PC from your Pocket PC!
To make it short, in the Comparison Chart ( http://www.winmobiletech.com/122006PPCPCRemoteControl/PPC2PCRemoteRoundupTable.htm ), it's the "Resolution, zoom, color" group that you must check out; most importantly, the first ("Remote desktop resolution?") and the fifth ("Remote desktop resolution settable?") row. The latter even shows how you can actively change the resolution from the client.
laakness said:
Are you trying to get into them from the Internet or are you on your WiFi network?
If you are on your WiFi you will need to know the IP address of the machine you are connecting to unless you have DNS setup internally. Not sure if WM6 by default will detect Windows names.
If you are coming from the Internet then you will need to port forward your to each of your machines.
Click to expand...
Click to collapse
Well....i would want to get connected via Home WiFi first. All the 4 computers are connected to the same router. I've tried putting in the computer IP address (ie: 192.168.1.101::5900) but it still says not able to connect. the ::5900 seem to be added in on it's own.
Where to download the remote desktop cab???
techsc said:
Hi there,
i have installed Finster869's WM6_RemoteDesktop.cab, which is available somewhere in the forum here.
Can anyone tell me if it is possible to set some advanced options, which are normally shown in the regular remote desktop application for Windows Desktop OS's?
- Display: Remote Desktop Size
- Experience (Desktop background, Menu animation, themes)
Thanks
Chris
Click to expand...
Click to collapse
madster said:
Where to download the remote desktop cab???
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=47732&d=1187725020
is the remote desktop save? ther are no options tu use a save conection or something like this. what can i do to make my connection save? I have a 2003 small business server.
maxmax72 said:
is the remote desktop save? ther are no options tu use a save conection or something like this. what can i do to make my connection save? I have a 2003 small business server.
Click to expand...
Click to collapse
1, welcome to XDA-Devs
2, you mean is the address, your name / password saved? All of them, as is also explained in the chart of the Bible (did you check it out?????), in the "Login: l/p credentials definable, used (with RDP clients) and remembered? – an advantage particularly with RDP-based clients" and the "Server IP’s remembered?".
Please DO spend some time reading these Bibles / charts before asking questions!
no, sorry for the bad english. I mean, what about the security of the connection. Via PC i use a ipsec connection. When I use a normal connection it is possible to trace my login data and to get access to my server for other people.
maxmax72 said:
no, sorry for the bad english. I mean, what about the security of the connection. Via PC i use a ipsec connection. When I use a normal connection it is possible to trace my login data and to get access to my server for other people.
Click to expand...
Click to collapse
RDP is a safe protocol - no cleartext passwords are communicated. BTW, you can also run RDP over a VPN connection to maximize safety.
Is there a way i can play a joke on my Friend comp
Put a software on a USB & just hook it to pis comp
showing im just lookin at my New Pics & download the software
& be able to see All the Porn hes been watching on his Computer lol
dont need to control his comp just see wht hes doin
also can see how many more boys my grilfriends is talking to lol
Hey, I'm looking for the best remote control software to use on the kaiser. (to control your desktop pc from ppc)
Any suggestions?
I use https://secure.logmein.com/home.asp
It works a treat and it's free.
Yes, another vote for LogMeIn Free.
Also check out http://wiki.xda-developers.com/index.php?pagename=Access your desktop PC from your Pocket PC! for more info, it explains everything
And yess, another one goes fo rlogmein...
great solution !!
my only problem with logmein is when I log in with PIE sometimes i have to enter my user name and PW about 40-50 times until it logs me in. it keeps throwing me back to the login screen without any message why. i posted a logmein tech support and no response. I tried this on different browsers (PIE/opera/webfront) and got the same results.
other than that, logmein is great.
real vnc enteprise, and realvnc mobile.
connect to REMOTELY with wifi, I use this for everything (IM, Downloads, Etc)
takes little experience to set up, pretty straight forward
ekw said:
real vnc enteprise, and realvnc mobile.
Click to expand...
Click to collapse
If you REALLY want to go the VNC way, use PT Pocket Office instead. It uses way lessbandwidth and is way better.
I am having a problem with logmein from my phone.
a bit of a background.
I'm loggin into a Windows XP machine.
I have the logmein free account.
I can use a PC and it logs me in just fine.
It works on my account from my friends Sprint Mogul PPC just fine with WM6 and ractre cab
No matter what ROM on my Kaiser, it gets the same error
No matter what browser I use on my Kaiser, it gets the same error.
The problem. I have the cab installed already that I DLd from logmein.com. I go to logmein.com and type in my login info/pass. I click "logmein".
about 1 in (5-50) times it will then take me to the screen where I can select my computer. The other 4-49 times, it takes me back to the login screen where you enter your login info. There arent any error messages or anything. I then click "back" in PIE and hit the submit button again. repeat this a ton of times until it logs me in.
The next screen is where you select your computer. The same thing happens here, and it will bring me to the login screen. Click back and submit again and million times and eventually it will work.
Once I get to the screen where you can click "Remote control" this works fine.
I've asked on logmeins forums and no responses. I emailed their tech support and no responses.
I dont know what to do at this point except move to different software.
any ideas?
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
grizzley said:
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
Click to expand...
Click to collapse
Yes. and I assume you read the part where i've already installed that?
it works for me after....
running the disable cingular proxy cab.
I used to get the exact issue you have on my Tilt. Here's what I've found to work.
Run the disable Cingular Proxy cab (search around, its everywhere in these forums) PRIOR to entering your username/pass.
If i have done this, it will go the 1st and every time to the my computers list and then i can RC from there.
If i forget to run it and i hit "the loop", you can leave IE running and run the cab from a file explorer, then switch back to IE and try again.
Annoying, i know...this coupled with the need to use IE rather than Opera Mini are definite cons to using Logmein on WinMo, but I still need to almost everyday.
Let me know if you can't get this solution to work for you.
I tried that and it didnt work.
Downloaded disable cingular proxy cab.
rebooted.
ran disable cing proxy cab
ran PIE
went to logmein.com
logged in (that part went fine)
clicked on computer.
it took me to login page.
rebooted
ran pie
ran disable cing proxy cab
went to logmein
tried loggin in.
looped =/
Nobody has a good answer for this that I have been able to find. You can try loggin in on LogMeIn's PDA site, https://secure.logmein.com/pda That stopped the endless log in loop problem for me, and I can get to my computer groups. However, I can't remotely control anything. I click the computer I want, enter the password, and it brings up a screen with whatever options that computer has (just Remote Control for LogMeIn Free, Remote Control and File Manager for LogMeIn Pro.) You click Remote Control, and it doesn't do anything, just brings you right back to the same screen. File Manger DOES work on the computer I have LogMeIn Pro on, but I really need the Remote Control. It is maddening, nobody at LogMeIn or any other phone forums seems to know why this is happening. I never had the proxy setup to begin with, everybody keeps talking about proxies like that's the problem, but disabling the proxies doesn't solve the problem for a huge number of folks. I've been able to find solutions to all my other Tilt problems with a little diligent googling, but not this one. I'd love an answer myself!
sorry...
sorry guys..
I have tried almost every kaiser rom here, and at least half of the wizard ones when i had that and the logmein has been a thorn in my side as well, except for me the toggle of disable/enable proxies works every time.
I wish you both luck in your searches for a more universal answer to this problem.
the real key is a fully supported solution from logmein...
Are you using PIE Plus or another multi tab browsing utility? The happens to me with PIE Plus, but only if I select Pocket View in the view settings.
i gots it 2 work!
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Okay, I post a question in this thread & what happens????
Now everytime I log into Logmein.com I connect fine but about every five minutes I lose the connection & get an "Invalid IP Address" error. Anyone have this problem? I tried adding my own IP but then I can't connect period. Anyone know a fix?
isimme said:
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Click to expand...
Click to collapse
Followed these exact steps. still loops for me X 1000
I tried installing to device, then my storage card, repeating all steps.
The odd thing is that I downloaded minimozilla (mobile firefox) and it logs in JUST FINE) but of course stops at the point where it would show you the desktop. but has ZERO issues loggin in.
*SIGH*
Anyword on a fix for Mismatched IP Address error?
i dont have anything on the mismatched ip thing.
I did manage to solve my problem on my own.
So anyone else still having this problem:
start|settings|connections|connections|Advanced Tab|Select Networks
In the top drop down, select the tab for the internet that you use (Medianet, etc)
Click edit.
Bottom tab click proxy settings.
Uncheck "this network uses a proxy server to connect to the Internet"
Click ok.
The cab that is supposed to do this didnt work for me. but doing this manually works for me.
Working perfect on Blackstone with the cab downloaded from logmein.com with Internet explorer.Not working in Opera.
My steps:Opened https://secure.logmein.com/pda from IE, logged in to my account,then when i pressed connect logmein forced me download THEIR RACtrice .cab ,installed,restarted IE,and i'm in bussiness.
I have serched high and low. I was wondering if there was anyway to get Microsoft Access onto my Fuze. I have a biz that runs on Access, it would be helpful if i could have it with me at all times instead of having to carry a laptop everywhere i go.
I don't think such a program exists. I'm assuming that your Access stuff is a full application with forms, etc? You can probably use something like this --> http://www.handster.com/programs.php?id=2906&for=Pocket PC mdb to update the tables, but I can't see it running reports, etc.
If you have a decent data plan, then one option is to run Remote Desktop to a PC back at base running the Access Application. I've got a Virtual Machine on my server which I can access from my Touch Pro. I can run any app I want on there, and as long as I don't try to do anything stupid (like play a video), then it works fine. This is the only way I could see your Access application working on your TP.
Cheers,
Steve.
StevePritchard said:
I don't think such a program exists. I'm assuming that your Access stuff is a full application with forms, etc? You can probably use something like this --> http://www.handster.com/programs.php?id=2906&for=Pocket PC mdb to update the tables, but I can't see it running reports, etc.
If you have a decent data plan, then one option is to run Remote Desktop to a PC back at base running the Access Application. I've got a Virtual Machine on my server which I can access from my Touch Pro. I can run any app I want on there, and as long as I don't try to do anything stupid (like play a video), then it works fine. This is the only way I could see your Access application working on your TP.
Cheers,
Steve.
Click to expand...
Click to collapse
Yea, is there anyway u could point me to that program. I would like to see if can use remote desktop.
t1990le said:
Yea, is there anyway u could point me to that program. I would like to see if can use remote desktop.
Click to expand...
Click to collapse
I believe the client is built into the Fuze. If you have a custom ROM, just do a search. Several threads have the cab to install it on the Fuze. It has also been built into Windows since at least XP. You have to be a local admin or in the remote users group to Remote Desktop or RDP to your desktop.
Hi,
I need a software which will help me project Nexus One Screen onto my PC. I used a Java based software Droid(at)Screen for G1. It is not working for nexus One.
Can anyone help plz.
Thanks in Advance
If you have root, then search for droid VNC server on the market.
even without root, it might work for viewing purposes (i.e you likely won't be able to type or click).
Works well with most VNC client / viewer applications - in fact, you could view it through a http link in your browser without a VNC client if java is installed / working ok on your machine.
Thanks Sd00 for the response. Actually, I am new to these devices, so couldnt understand what you had mentioned. (actually its too much of hightech for me). Can you please let me know what I need to install on the phone or check?
Thanks
Install droid vnc server app from the market, run the app, press start button on the app, read the http it shows you on the screen & type it in to the address bar of your internet browse, waa laa.