So I dropped my Tilt today and there are several big cracks through the glass front. The phone works fine and I think the LCD screen is alright. I think the cracks are just in the glass part and the LCD is fine but I cant tell. One thing for sure is that the touch response is all messed up and I can't align it. I see digitizers on ebay for cheap. Is that the glass part that is cracked? Can I just get that or do I need a whole screen assembly?
Thanks
I tried to change digitizer but it is a mess you need to weld it to the display and it is not so easy (I'm not an electronic technician), additionally it comes sticked all around the display border so it is hard to clean the display boundary to stick the new digitizer and also it is hard to remove the old digitizer because it is to weak to remove it in one piece. For this reason, at least for my experience, I rather prefer to change the display and digitizer together so you don't have to fight with the removal, welding and sticking the new digitizer. Hope help you take decission.
Related
I will soon be opening up my phone (T-mobile Pocket PC Phone Edition) to replace the glass screen with a new one ordered online. I've never even opened the phone before and was wondering if someone has performed this operation before. I would really appreciate any pointers, tricks, cautions, pictures, etc.
Thanks.
lawrence... where did u get the replacement??
i wonder if they got replacement cases! i chiped mine
The company I bought the screen from was GetHighTech, Inc, in California. By coincidence, they are about an hour's drive away from my home.
They only sell the glass screen and high capacity battery replacements. The screen comes with absolutely no documentation or instructions. I just got it a few minutes ago.
just wanted to see if you had any luck with the changeout.
Screen replaced successfully: observations
It was a tricky operation, but I finally managed to replace my broken touch screen. And the patient is alive, and only a little worse off for the experience.
I was held back for a week until I could get the right size torx screwdrivers to remove the back cover. Once inside, it was a very very tricky process slicing off the broken screen with a razor blade. It was glued to the lcd display. This would have been hard even if the screen was not shattered. Definitely needed goggles to protect against flying splinters of glass. I used cotton swabs and 99% alcohol to clean the glass dust off the glue around the edges of the lcd, then I put the new screen on while that residual gum was still a bit tacky.
There was a very thin existing plastic cover over the lcd in between the glass touch screen and the rest of the lcd. Since it did not come off with the glass, I left it in place even though it had a couple of small scratches from contact with the broken glass. It seems like it was there to keep dust off the lcd or something like that.
This was my first time inside the phone. I noticed that replacing the whole LCD component would have been a trivial task by comparision to replacing the glass alone. And even easier would have been adding a new battery.
cracked lcd on xda
hi, does anybody know where i can get a replacement for the lcd screen on my xda... its totally mashed and i need to unlock it but the screen is bad...
i live in uk... any ideas guys..
pls help out
has anyone give me pls an idea how much a new replacement screen for XDA might cost
currently I am having two XDA (one XDA and one MDA), MDA has a broken screen ... I'd like to know how much is the material (screen), I have so. to do the actual job of screen replacement
regards, monika
I replaced my touchscreen a few weeks ago. Like Lawrence said it's a little tricky and you need to be patient.
I bought my touchscreen from www.pdasmart.com/pdaphone.htm for $75 and they gave great instructions.
thank you for your kind answer
hmmm, seems like it is nice to live in US ... where all the things for XDA are almost readily available :wink:
regards, monika
Protective Acryclic Cover over the Digitizer
I have an odd problem. I have an SX56 with a broken protective cover. The protective cover is the acrylic sheet that sits between the digitizer and the outside world. Everything else works fine including the digitizer. I have found every replacement part except that cover. I've even tried local plastic stores. They don't carry the proper thickness (0.125mm).
Any thoughts or sources besides sending it in for a $200 repair?
I bought a att tilt used with a broken screen. Thing is the lcd screen looks fine as in i can see the hole screen(no broken pixels or anything). But it seems its cracked below the front glass as i cant feel the cracks. So basically I am asking if the only parts to the display are the lcd screen and the touch screen and the front glass? Cause since it doesn't seem the lcd screen is broke no reason to buy both. And wondering if the touch screen and front glass are two different pieces also.
Thanks for any help.
thanks for the help ...............
You only need the touch panel but you will need to solder 4 end of touch on screen. Also, use 4 scrooves method as it is quicker and faster to get to the screen.
the whole screen can be easily replaced for about $60 for a new screen. just need to disassemble the Tilt, there is a guide around here somewhere on how to do it.
First of all, HI to every one, this forum is excellent and u are doing excellent job.
I have one problem,yesturday my htc tytn Ii felt down from half meter and from that time my touch screen is not working . screen is working fine but touch no ...what can i do? to open a case and see if conector is maybe disconected or ? is there need buying new lcd screen?
You can try opening it up and disconnect/reconnect the touch digitizer ribbon cable, if that doesn't work buy a new touch screen digitizer. They're fairly cheap.
so correct me if i'm wrong,there are two parts on the display? lcd screen and that touch screen digitizer??and digitizer is on top?
Yes, there's the LCD screen, then on top the digitizer.
the digitizer costs about 15 bux on ebay, and the lcd with the digitizer costs about 50. my touchscreen stopped responding awhile back, so i had to replace it. word of advice though. the digitizer is kinda build into the lcd, and it is a huge pain (atleast 4 me) to replace it. i ended up cracking my screen doing it, and had to but the whole lcd.
so your suggesting to buy entire lcd screen with digitizer on it?
You can get the lcd+ digitizer from yallstore for 35$ http://www.yallstore.com/htc-tilt-tytn-ii-att-8925-lcd-touch-screen-replacementt56-p-874.html
Which is exactly what i ordered on thursday after my screen cracked.
Replacing JUST the digitizer is quite tricky, i don't know if any of you guys have done it (i have) and it was pretty darn tricky if youve never taken fiddley things apart beware! the digitizer glass is glued on (around the edges) to the LCD, a sharp knife around the edge (the glass WILL crack) and a careful replacedment (i had to solder the ribbon cable on) should help there is a guide somewhere where someone has documented their attempt!
so can i be sure that my problem will be solved with new lcd screen?
please guys i need anwsers fast
zolmajstor said:
so can i be sure that my problem will be solved with new lcd screen?
Click to expand...
Click to collapse
Can you be certain this will fix it? No. It's about 99% likely, however. I don't know about you, but I pay alot more than $35/month just for my service. I haven't done the screen on my Kaiser, but I did on my Excalibur, which my son then inherited. To be honest, the Kaiser looks easier from what I've read.
it most probably isn't a software problem, so yes buy a new LCD+digitizer and replace both.
My son dropped my n1 and I heard that nasty sound...
Started as a small crack in top corner with a white strip extending down the side of the screen. Other cracks are visible and the screen got progressively purple around the cracks and is now almost dark. I cannot feel any cracks and the touchscreen works fine.
I don't want to take it apart before ordering the parts since it is still usable. Any way to tell which part is cracked? I've read the digitizer is plastic?
Thanks in advance for any insights.
Mine cracked a while ago, 18 months probably. I've never had any problem with the screen. If touch still works, just ignore it.
The digitizer is the screen and touch electronics built into one part. If you have a crack, you'd need to replace the digitizer (which again, is the screen).
Keep in mind it would take hours to replace. You also run the risk of other things not working correctly once you put everything back together. I've replaced the digitizer in an original Droid. Everything went [relatively] well. But it took several hours, and certain [fancy] stickers were not able to be replaced. Meaning, it looked like it had been disassembled.
You broke the amoled underneath the digitizer I'm sure of it. I know because I did the same thing last year (13 months ago actually) and I could see a small crack in the amoled (digitizer was still intact) the screen went purple then blue the next day then went totally black within a week. Although it might have been a worse crack on mine.
BTW: the digitizer on the nexus one is not plastic it's gorilla glass.
touchscreen works fine? then its probably not the digitizer
the crack itself might be the digitizer rather than the display but the way youre describing it, the ink of the screen is running? well, tough luck..
it might just be better to buy a new phone (or a cheap used n1)
grimey01 said:
touchscreen works fine? then its probably not the digitizer
Click to expand...
Click to collapse
Actually you can crack the digitizer (spiderwebs and all) and it will still work like new the only thing is you will be looking around the cracks to see the picture.
The N1 does not have gorilla glass, but it does have a hardended glass (gorilla is just a brand name for a type of treated glass).
And if you are getting discoloring, it is definitely the AMOLED or SLCD screen (depending on your phone). The digitizer is the actual touchscreen part. It can still function with the cracks, but you can usually feel that they are there. Both are replaceable, although, it isn't the easiest thing to do. I know HTC will replace the AMOLED screen for around $110 and they offer the advanced exchange program with it. I would assume similar prices for the digitizer (although, the definitely isn't your problem, unless both are cracked).
Guys,
I broke my screen, the LCD is good but the digitizer doesn't work. Aparently, this phone works differently from olders phones in which you can replace only the digitizer, but not this one since are fused together.
My question are:
Where can I buy one that WILL work? (i bought one in ebay and was faulty)
Will any LG G2 screen fit the VS980 (D805, D802, etc)?
Any help will be appreciated.
thanks!
neondunker said:
Guys,
I broke my screen, the LCD is good but the digitizer doesn't work. Aparently, this phone works differently from olders phones in which you can replace only the digitizer, but not this one since are fused together.
My question are:
Where can I buy one that WILL work? (i bought one in ebay and was faulty)
Will any LG G2 screen fit the VS980 (D805, D802, etc)?
Any help will be appreciated.
thanks!
Click to expand...
Click to collapse
If you haven't already got one, you can get it at repairsuniverse - http://www.repairsuniverse.com/lg-g2-lcd-touch-screen-digitizer-replacement-black-verizon.html
The repair is a little delicate in that you have to completely disassemble the phone and pry the screen out. You don't need a proper heat gun, a hair dryer will work just fine. One problem to be aware of: the screen really needs to fit flush against things otherwise the proximity sensor (top left of screen) will think that something is near it all the time and will make the screen turn off and you'll struggle to get it on again. They supply you with double-sided tape and it sorta-kinda works if you're careful. Pro tip: don't do what I did and unseat the newly-installed screen without heating it - you'll damage the screen. Also, superglue seems to do bad things to the screen. I now have a fully functioning digitizer with a screen that looks like hell. YMMV.
I am also in the same boat, having dropped it this past weekend. LCD works, not digitizer.
Any thoughts on replacing just the digitizer/glass vs. getting the whole assembly with the LCD? Seems significantly more dificult, considering the heat gun/glue assembly and only about a $30 difference between the two methods based on ebay prices.
morphtcat said:
If you haven't already got one, you can get it at repairsuniverse - http://www.repairsuniverse.com/lg-g2-lcd-touch-screen-digitizer-replacement-black-verizon.html
The repair is a little delicate in that you have to completely disassemble the phone and pry the screen out. You don't need a proper heat gun, a hair dryer will work just fine. One problem to be aware of: the screen really needs to fit flush against things otherwise the proximity sensor (top left of screen) will think that something is near it all the time and will make the screen turn off and you'll struggle to get it on again. They supply you with double-sided tape and it sorta-kinda works if you're careful. Pro tip: don't do what I did and unseat the newly-installed screen without heating it - you'll damage the screen. Also, superglue seems to do bad things to the screen. I now have a fully functioning digitizer with a screen that looks like hell. YMMV.
Click to expand...
Click to collapse
Any suggestions on getting this LCD vs. one from ebay that is also pre-attached to the frame and comes with tools? They seem identical otherwise.
Hi,
I have some experience since I replaced twice mine lol xD
There're no good quality screens (they are all copies, no OEM screens) and all 3 that I got from 3 differentes vendors suffers from yellowish spot on the lower left corner (its not my phone that has an issue, one screen actually was a phone that I bought on ebay and had the screen replaced and still suffered from that) and others from misalignment. Here's a pic that I had to send to an ebay seller to prove them that their screens were ****:
http://i62.tinypic.com/15mn1w1.jpg
And got the money back at least.
The digitizer and the lcd are fused, so if you try with digitizer/glass and screen apart, you'll have to buy optical glue in order to fuse them, if not you'll end up with two things glued together that looks awful.
If you go with the whole assembly, its luck to have one that works, so you'll have to be patient and asume that you may receive an awful screen. Luckly, ebay protect you, so if you're not in a hurry you can test until you grab the working one.
Any question if I can help, just le met know.