Related
Hello Everyone,
My BA is stuck at the Splash Screen, I suspect that the Bootloader is corrupt. Does anyone know how to flash it?
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
imatrix's suggestion.
@imatrix
Followed the steps before, and followed them again.. I'm still stuck.
Something interesting happened though:
There are two horizontal stripes across the splashscreen now.
I already tried to flash the OS, It doesn't work with the standard imate flash executable (It used to work before) and now I'm getting a 'MODEL ID ERROR' when I try to flash it using the BAupgrade... executable.
I tried with the MAupgradenoid tool, it flashes but I still get stuck on the splashscreen...
Thanks,
Wadih
BlueAngel Bootloader
Anyone has a way to either dump a bootloader file for the BA (Providing the file of course) or alternatively directives to copy it from another device (From the same make, i.e. Imate PDA2K) ?
Many thanks,
Wadih.
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
@imatrix
imatrix said:
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
Click to expand...
Click to collapse
I did, but as I specifed in me earlier post, eventhough the MAUpgradenoID flashes the files, I still get stuck at the splashscreen.
Interesting point: After flashing witht the MAUpgradenoID, I try reflashing back with the BAupgradeid.. I get the Model Error ID error back..
Something in the BA is wrong, and I believe it may be in the Bootloader. So, is there a way to replace the bootloader itself?
EDIT: By the way, I can't seem to be able to place a WM5 rom instead of the WM2003, although the flashing procedure starts, it quickly ends (i.e. without the percentage bar appearing) and says that the flashing worked successfully... But nothing gets actually flashed.
Many thanks for the help imatrix.
Regards,
Wadih.
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
@imatrix
imatrix said:
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
Click to expand...
Click to collapse
Thanks for the link, but how do I copy/get a clean boot bin file? (Which app, syntax, etc...)
Cheers,
Wadih.
BlueAngel froze on isalling wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
BlueAngel froze on installing wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
100/100 work
imatrix said:
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
Click to expand...
Click to collapse
thaks br very good
Hi, I have the problem, that windows does not recognize the Blue Angel any more, so no "WCEUSBSH001" available. Any help??
Thx
Hello, when I boot android to htc topaz /diamond2/ all is going throug, but touch screen doesn´t react.It means I can not insert PIN or if I start without SIMCARD I can not do anything on main screen, since touch screen doesn´t work.
Could please any help me with this troubleshoot?Thank You very much.Martin
I'm having a similar issue. My screen calibration seems to be backwards. If I want to activate a program on the left side of the screen, I have to select the program on the right. I deleted the calibration file and restarted with the same results.
Any ideas?
Nobody has same issue?
I'm having a similar issue.please help about anybody!
touch screen
finaly resolve myself---unzip all files directly to pure formated FAT32 sdcard.
tree as follows:
/storage card
/anboot
/AndroidApps/
/conf/
/media/
/STARTUP CONFIG/
/STARTUP.TXT
/haret.exe
/initrd.gz
/rootfs.img
/system.ex2
/zImage
copy STARTUP. TXT AND START UP (both in STARTUP.CONFIG/TOPAZ) to root of SD CARD and to anboot.
start haret.exe.
WORKING- but I can see, that WM are much more faster on dimand 2 than this android froyo..That´s my experiences.
Hi,
I cannot flash 0.78.OliNex Hard-SPL on my new X1i: The progress bar stays at 0% until the timeout, then Error 262. I tried everything (no sd-card, no sim, hard reset, compability mode etc.), no avail.
My new X1i has the image version 1.05.932.7 (03/24/09), the bootloader reads:
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
The type is AAD-380001-BV.
Radio is 1.14.25.55, protocol 52.65.25.34J, extended protocol 1.0.11809.7229.
Software ID is 1213-6439, version R3AA007, user id 1215-3303, user version R15A, content version PA10.
I noticed that the installed WME 6.1 is modified compared to the old X1. In particular, during my first attempt, a WM6.1 warning message with a red boundary popped up, indicating that proceeding could harm the phone (yes/no). I checked yes, and since then, the message does not come up anymore. Probably the ROM is not in Olis compatibility list, so I looked for unsigned HardSPL, but found only the Image Version 1.00.Diamond, so I did not flash it (probably it would brick my X1i). Any idea would be very much welcomed, I want to get rid of WM6.1 and flash WM6.5.3.
Thanks a lot for any hints.
BTW, I've posted this thread alredy in the X1 General forum and realised only now that this forum might be a better choice, sorry for that.
Next try
Hi,
I found the recommendation below and tried, but no avail as well.
Does anyone know an unsigned HardSPL by Oli for the SE X1?
Any help appreciated.
_________________________________________
xidesu
3rd August 2010, 09:33 PM
Default HTC Touch Pro, Fuze HardSPL Error 262 FIX
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
don't flash bootloader-stuff from other devices, never! Oo
try flashing hardspl 0.72 via usb first (the old one), then flash 0.78 as an "update".
Next step, but still not working
Well, I was able to flash APP_SW_X1i_GENERIC_UK_1213-6450_CDF1215-1832_KOV_R1AA017
from the SD card, and I have now SPL0.72.0000 on my X1.
ROM Version:1.02.931.3
Date: 08/29/08
Radio: 1.06.25.29
Protocol: 52.43.25.24U
Software ID: 1213-6450
Version: R1AA017
However, X1_HardSPL still terminates with Error 262 as before. Flashing OliNex's HardSPL via SD card (RUU_Signed.nbh renamed to kovsimg.nbh) does not work either. I still cannot flash my Dynamics GTX 2.3.5 GER ROM.
Any ideas?
BTW, I tried with a desktop and a laptop, both XP SP3 and Active Sync 4.5 on various USB ports. I disabled Security Options via X1_Tweaks. Everything seems to work, only flashing HardSPL still fails.
At least, I am a step back now ;-)
Bingo!
I succeeded. The solution has been:
- Establish an Active Sync connection via USB.
- Copy the file Xperia-SSPL-Manual.exe to the root directory of a FAT32-formatted SD card (no SDHC, an elder one). SSPL-Manual is the basic part of OliNex bootloader.
- Unpack HardSPL by starting it or use RUU_Kovsky files in a directory of the PC hard disk. Make sure that the proper RUU_Signed.nbh file is in this directory (the HardSPL image by Olimex in the version you whish to complete the basic SPL started onthe X1)..
- On the X1, open the file manager and start Xperia-SSPL-Manual.exe by clicking on it. The X1 switches to the boot loader mode indicating HardSPL 0.52 by OliNex.
- On the PC connected to the X1, start ROMUpdateUtility.exe.
In my case, the flashing went very quickly to 100%, and I have now HardSPL0.78OliNex on my X1. Now I can proceed (Task29, image flashing). At least I hope so.
My assumption about the the problems I faced: My X1 had a quite recent firmware which probably blocked any change of the SPL and allowed only generic signed images to be flashed, no cooked ones. Xperia-SSPL-Manual.exe bypasses this lock by applying an OliNex cracked routine, thus allowing to overwrite the SPL. At least I think so.
Done.
My Dynamics GTX 2.3.5 GER ROM is now up and running. THX a lot for the great support of this forum!
Thanks for instructions I have same problem with my X1.
You're welcome.
It has been worth the troubles - the Dynamics ROM is great, and until now, I found no hickups.
Well, what happened:
i flashed hspl
i flashed Dynamics_GTX_2.4.5_WWE_Kovsky.nbh
i was happy
i realized that i cant sim-unlock here, so:
i flashed orig. spl aka RUU_Signed.nbh
and then i flashed original APP_SW_X1i_MOBCOM_AT_CDF1215-0312_KOV_R1AA019.nbh
then i sim unlocked the phone by code
then i went directly for a 28
it hang itself when i tried to do flash hspl at 17%
since then, i get everytime stuck at 0% and get the msg 262
even messing around with mtty and all different roms and programs and settings didnt lead any further.
task 28 looks like:
Cmd>task 28
Format start
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format end
Cmd>
task 29 looks like:
Cmd>task 29
Format BINFS start
CE start start block=321, total block=3775
Write 0xFF start page=0x5040, total page=0x3AFC0
Format BINFS end
Cmd>
task 8 seem to take forever, the screen shines in bright white.
with power and vol down i see:
3 colors
kovs110
spl-0.72.0000
microP1-707
microP2-707
serial (which, ofc. turns into usb when i am connecting it)
from there on everything went fine, but the flashing.
ofc i try to flash hspl, but every method hangs at 0% with error 262
mtty up and running (as far as i can see ) i definitely need help.
crawled the forums für 18 hours now, i cant find a solution to this on my own.
btw. cant load something on the card, otherwise i would have tried to load from the map...
again, i call for HEEEEEEEEEEEEEEELPPPPPPPPPPPP!!!!!!!!
no one? :O
do i have produced a brick?
playing around to find out whats going on:
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Kovsky, Bootloader Version : 0.72.0000
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=micron_mt29f4g16abc
DEVICE ID=0xBC
DEVICE MAKER ID=0x2C
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x1000
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
.
.
.
BLOCK 32 (0x20) is reversed block /////// that seems to be quite long, in the documentation it goes just till 12 and then it shows partitions, which are not showed at my device :/
OS NOT FOUND !!!
Cmd>checkimage
SPL CRC checksum = 0xEC2F928F
CE is None.
ExtROM is None.
Cmd>task 32
gives no output.
is it possible to flash per mtty? (LRS?)
btw it boots into white screen, not three color bootloader screen
with power vol down into bootloader without any problems
but from there on it always stucks at 0%
//edit
set up an old laptop with winXP and tried it there - you never know? - didn't work...
//edit #5
got a micro sd card
formated it with fat32, put the RUU_Signed.nbh on it,
renamed it to KOVSIMG.nbh, put it in the phone and started it with vol down and powerbutton to the bootloader.
hangs at loading...
come on guys, some one have to have something to say!
To be honest it does not sound promising
try this with mtty
Cmd>set 16 0
Cmd>task 14 0
Cmd>reboot
then try and flash a stock rom
when copied on the sd card, it hangs at loading
when flashed over usb, it hangs at 0% at the progressbar
if you try another hspl does it just sit at 0% ?
i just tried this one out: http://forum.xda-developers.com/showthread.php?t=431218
are there other versions of hardspl?
sorry i meant doing another hardspl with the version your using
yep... just sitting at loading or 0% depends on the way i try to flash
i think, somehow the partitions are ****ed up,
is there some one who knows the mtty and bootloader stuff very well?
have you thought of trying one of the Android NAND roms? If you can just get it to install, you could then go back to windows mobile
do i not need hard spl for android?
does android not get flashed like a windows rom?
i ll read into that, thx for the tipp
It's similar to windows roms yes, but there is a version (ICS 4.0.4alpha), that changes the internal partitions so as a long shot you could try this and then try flashing back to a windows rom.
The thread in question is
http://forum.xda-developers.com/showthread.php?t=1614236
Hi all,
I would like to ask you about my urgent toubles with my kaiser.
A few days ago my phone rans slow, so I performed soft reset. It ussually help. But now phone can"t boot.
After power-on logo smart mobility appears on the screen and after cca 10 seconds red labels R, G, D in the right botom corner and (if there is inserted SIM card) green light start to blinking and I can dial my number from another phone, but no ring or other response on my phone.
After several days of reading here I tried some solutions and discover following:
P/N: 99HCY104, IMEI: 355757010550073, S/N: HT737GB01576
************
after power on or soft reset:
smart mobility
R 1.27.12.11
G 22.45.88.07H
D 1.56.00.00
and freeze
**************
tricolor screen (after press power+camera):
KAIS130
SPL-1.56.0000
CPLD-8
*************
I can connect via USB and run MTTY1.42:
Cmd>info 0
Platform Model ID:KAIS13000
Platform HW Board ID:31, PVT1
Cmd>info 2
HTCSHTC__001‰řđ'HTCE
Cmd>
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1300HC_0HTCE
Cmd>
Cmd>boot
InitDisplay: Display_Chip=1
No card inserted
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
then MTTY freeze and kaiser try to boot and freeze in splash screen
************
If I try to perform hard reset (both soft keys + soft reset) Warning screen appears and let me to press send key to reinstal.
I am hoping to fix without a hard reset. I don't want to lose important data mainly in draft email folder and calendar. Is there any way to save this stuff?
Thank you all for your time.
Sincerely
Jarda
I don't think there is a wayy to save this. I think you really have to install a new .nbh, but if you can do a ROM dump, then maybe you can (don't ask, I don't know how to do this).
Don't scare me. I can't lost my hope.
However thank you for quick reply.
I have some idea: sold out ROM chip from mainboard (Samsung K9K2GXXX0M, TSOP 48pin package) and read it in Flash EPROM reader. But I'm affraid I'll get 256 MB hex file and I'll not be able to extract my important information. Does anybody know how is organised data on ROM memory module in Windows CE, especialy in Kaiser?
Thanks for any ideas
Jarda