I bought my SGS from USA and I tried to use it in Europe. Before I began to use, I had updated the firmware with Froyo. After that, my phone haven't attach the operator. I reflashed it many times with many type firmware versions, but it couldn't work.
*#1234# returns PDA and CSC versions correct; however, "Phone:Unknown".
And some firmware upgrades give the following error at phone console:
--Appling Muti-CSC...
Installing Muti-CSC
mps_dat value: TPH
copy_multi_carrier from: TPH
multicsc : can not access to /system/csc/TPH/system/
copy_common data
Besides this, *#06# returns nothing
Related
When I type *#1234# to check out what pda/phone/csc version i got, it comes up as this:
PDA :
PHONE: I9000XXMJ4
CSC :
I flashed to JM8 to update through Kies again, but Ive tried other roms aswell, with same result.
Tried the manual part from here but without any luck, my phone said "MUST BE THREE LETTERS!" or something, it showed at top "XEE" and below was just a empty spot, with a dot to the right i could click on, but that didnt helt neither, and neither did it to press the XEE.
Ive tried Kies-registryhack to update the phone, without any luck.
With using *#*#44336#*#* i get:
INTERNAL VERSION
VERSION:
PDA: I9000XWJM8
PHONE:I9000XXJM4
CSC: Unknown
Build time 2010.08.31. (weird sign) 09:45:32 kst
Changelist: Unknown
With using *#*#4986*2650468#*#* i get :
PDA : I9000XWJM8
approved PDA :
Phone: I9000XXJM4
H/W : MP 0.800
RFCallDate: 2010.6.14
CSC : Unknown
approved CSC: Unknown
Anyone know how to fix this issue with PDA and CSC? and also make it update through kies?
Edit: I figured out that I didnt try with the kies registry patcher program yet, did that and it worked flawless, phone now says JPA, wich is latest one in sweden, and csc is recognized aswell. Problem solved!
I would like to flash a new Europ. FW version (say XWJS8 = ver. 2.2.1) to my phone with PDA: I9000ZSJPD / PHONE: ZSJPE / CSC: ZSJPD and ProductCode GT-I9000HKDVD2.
Has anyone of you tried this? I am afraid of any problems since the ProductCode does would not match the Europ. Firmware.
Thanks for some feedback
i tried a long time ago from dxjg4 to xwjpa using kies(it was possible before)
totally changed my prod code from xso to kor hahaha
but i dont know about your firmware
I was on DXJG4 too but I flashed to European firmware without a glitch. Mind you, I only flashed the "international" european versions, the one with XX as first two letters. Just like stated above, the only side effect is that it will change your CSC product code to KOR. But just a couple of months ago I changed it to XEU without any problem.
EDIT: Oh yeah I used Kies (tricked Kies, not it doesn't work) before and now I use ODIN for flashing
Hi,
I'm newbie with SGS, I tried to flash an official italian firmware 2.2.1 with Odin and 3 files. Everything appears ok, but now the phone module don't starts. On notification bar only a no-entry sign. Wifi works fine.
With *#1234# shows:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
With *2767*4387264636# shows:
service mode... nothing.
Originally, the product code was from a portuguese device, the firmware a 2.1-update1 release.
Any chance to recover the situation? The phone enters in download & recovery mode...
Have you checked to see whether your APN settings are correct?
Inverno said:
Hi,
I'm newbie with SGS, I tried to flash an official italian firmware 2.2.1 with Odin and 3 files. Everything appears ok, but now the phone module don't starts. On notification bar only a no-entry sign. Wifi works fine.
With *#1234# shows:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
With *2767*4387264636# shows:
service mode... nothing.
Originally, the product code was from a portuguese device, the firmware a 2.1-update1 release.
Any chance to recover the situation? The phone enters in download & recovery mode...
Click to expand...
Click to collapse
Phone should be I9000XXJPY, like all european 2.2.1 ROMS
Try to flash the modem only, check in ODIN that it lists modem.bin as being copied to the device.
Yes, I've tried to reflash a h3g rom (I have a h3g sim).
And it is not an apn problem, I can't access the phone signal at all, I get only a no-entry simbol on tray notification and can't make calls. Now it's getting to be a bit worried...
vcespon said:
Phone should be I9000XXJPY, like all european 2.2.1 ROMS
Try to flash the modem only, check in ODIN that it lists modem.bin as being copied to the device.
Click to expand...
Click to collapse
Hi,
originally I think to remember something like WTY, or WTI... in the box there are 2 manuals, 1 in english and 1 in portuguese... that's why I thought it could by portuguese firmware. The one I fashed was JPY, like you said.
The roms I downloaded in the package contains a modem file in this format: MODEM_I9000XXJPY.tar.md5. Not .bin. Can I flash it alone, with no pit file and "re-partition" option disabled? That's correct?
Thanks to all for your attention.
Another try, I flashed a JP1 radio from recovery, the process has gone well, but the phone still seems to not recognize radio. After *#1234#:
PDA: I9000RSJS2
PHONE: UNKNOWN
CSC: I9000ITVJS1
BUILD INFO: 2011.01
The telephone does not show the IMEI with *#06#... nothing.
Have to send it to assistance?
Hello! My 9305(from Hong-Kong) can't register in SK Telecom - emergency only (911 works). I tried to put the sim card to sony xperia(from Russia) - worked fine in 3g mode(umts:3). May the problem be in my csc?
AP: I9305XXBLL5 (Ripper ROM v8) CP: I9305BVBMF1 CSC: I9305TTELALI3
Check here:
http://forum.xda-developers.com/showthread.php?t=2010116
Raistlin1158 said:
Check here:
http://forum.xda-developers.com/showthread.php?t=2010116
Click to expand...
Click to collapse
Thanx, I've tried native modem for my HK phone zhali2 - the same result.
Don't know wich to install to work in S. Korea(
Find the Korean users thread probably in General .
JJEgan said:
Find the Korean users thread probably in General .
Click to expand...
Click to collapse
Korean users don't use 9305(
If you cannot ask in the Korean thread then use Google .
Korean users don't use 9305( >>> in that case you are wasting your time .
You will require the correct hardware re networks likewise modem and CSC
Trouble with most firmware on sammobile is that they are multi-csc and distributed for a region together with the factory code (KOR) for Samsung Korea.
If you install firmware via Kies your Product Code remains intact, but installing with Odin, and at reboot, android defaults to KOR inmany cases.
Have you tried going to Recovery Mode and Clear cache and Clear Data ? (recommended after a new install, but may also set your CSC to BTU -but again may not)
The only way to change Product Code to a specific CSC code, is to root your phone and install a CSC changer app from the Play Store.
Is any modem patch for 9305 like Ariza for 9300? May be this will help... I also tried to change option sha256 to 0 in phone lock service menu despite the fact that my phone wasn't locked (worked in many countries) and no result but gps can't find sats now(( returned that option back - no effect...
Hello everyone, i have some problems. I instaled with Odin android 10 for DBT, over my TOP firmware (SERBIA VIP), everything works fine, but i ended with BTU CSC. I tried with SamKey to change CSC, but it gave me error "AT RIL file not found, try reinstaling SamKey". Tried to reinstall, but it gave me same error. What is the solution for this? Please help!!