Before the flaming begins, I searched everywhere and couldn't find the exact answer I was looking for. So, I want to do a nandroid restore, but I would like to know if I would have all the apps that I had before wiping my phone back. I could've sworn that I restored my phone in the past and didn't have any of my apps. If that is what is going to happen when I do a nandroid restore, how can I get my apps back, or do I need to reinstall them? Thank you for your help.
NVM, I figured it out. It worked perfectly. I guess it doesn't work on a different ROM or something because after I flashed the ROM that I backed up, it worked. Mods, this can be locked/deleted or whatever.
Related
First, I have to thank the XDA forums helping me come over from my long WinMo background. Mad Props...
Being new to Android and my nexus one, I'm feeling the ROM flashing bug and want to try out a couple of different ROMS but don't want to have to add all of my accounts each time since I use crazy long, nearly impossible to type, passwords.
Is there some way to restore some of the configuration of my N1 between different ROM flashes?
Sorry if this has been covered, but I can't find it. It looks like the data is backed up in my nandroid backups, but I can't seem to find out how to only restore configuration.
Thanks
Rick
Take a look at Titanium Backup.
It works really well.
You need to be rooted and superuser in order to use it.
To find out more about adding superuser to a stock ROM, check out this thread at Modaco.
Edit:
Nandroid backups are really "just" disk images afaik.
There's no way that I know of to extract information from them.
brgds
Royan
Ok, thanks. I am running the backup right now and will give it a try tonight. Worse case, I just restore the nandroid backup and try again.
I've always wondered, what stuff is safe and not safe to restore in Titanium Backup. I've done a full restore when switching between like roms, but I'm guessing that wouldn't be a good idea if you were going from cyanogen to a senseUI rom.
OK, when I first started into this stuff, I tried to follow all the guidance that has been given before flashing my first ROM. I did a ROM Manager backup of my ROM the way I got it from AT&T. I did not write down my ID # or anything else. I'm assuming the backup has all the information that came with it. My question is how to re-load that original ROM. I've flashed quite a few ROMs now using the Odin one-click to go back to stock and Master Clear and never had a problem. I'm running P9 right now (w/ no problems) and decided to try something else. After seeing some of the threads on here about your original phone IDs, I wanted to try and recover that info by restoring the original backup. I did that straight from P9, but now I just get locked up on the DG boot screens. I'm going to One Click it again but I'm wondering how I can restore back to my original with the backup that I have. Any guidance would be appreciated.
Thanks
My apolopies if this is already posted somewhere but I can't find it
Your can not restore a 2.1 backup when on a 2.2 rom, if I understand you correctly. In fact I would only restore a backup if you are on the same rom as the backup, and even then you should disable the lag fix prior to restoring
Sent from my SAMSUNG-SGH-I897 using XDA App
Not to sure, I tried going to original with nandroid backup after flashing another rom and soft bricked. I actually got stuck at the AT&T screen which on Perc 9 (that what I was running) was the designgears boot screen. Odin 3 one click saved my sanity. if you can go 2.2 to 2.1 I don't know, but I'm not going to try it again. I just one clicked, master cleared, rooted, flashed Axura 2.5 and have been happy ever since. This was my fault, not Perc 9's, let me say that real clear.
Got it
Thanks. I did have to One Click restore to stock, Master Clear, and then restored my original backup. Now I gotta figure out what information I need off of it before I flash a new ROM. Probably a waste of time since I can't imagine going back to AT&T for anything, but thought I would get it since I was waiting to change to P10 soon.
BigMc71 said:
Thanks. I did have to One Click restore to stock, Master Clear, and then restored my original backup. Now I gotta figure out what information I need off of it before I flash a new ROM. Probably a waste of time since I can't imagine going back to AT&T for anything, but thought I would get it since I was waiting to change to P10 soon.
Click to expand...
Click to collapse
Um.. what information did you want off of it? If you just want your Android ID - there is an app for it on the Market (strangely enough called Android ID) You can then write it down and re-enter it at any time after flashing.
i was really interested in installing a new rom, specifically cognition, and i did, but i figured since i just got my captivate and all my media was on my sd card and i barely installed any apps, i would just skip the titanium backup step. I definitely was able to get the new rom, but i think i may have messed up something big, even flashing back to stock didnt help. I just want to know exactly how important titanium backup is and what it really does other than save a few settings and apps.
If you want me to elaborate on what i messed up just ask
arsenalbreak said:
i was really interested in installing a new rom, specifically cognition, and i did, but i figured since i just got my captivate and all my media was on my sd card and i barely installed any apps, i would just skip the titanium backup step. I definitely was able to get the new rom, but i think i may have messed up something big, even flashing back to stock didnt help. I just want to know exactly how important titanium backup is and what it really does other than save a few settings and apps.
If you want me to elaborate on what i messed up just ask
Click to expand...
Click to collapse
You are asking for help so don't you think telling what happened is important. Tibu backs up your apps and data. If you use it don't select system data because that will screw stuff up. Its not necessary to use tiny but it is very useful.
This is my Captivate. There are many like it but this one is mine.
Skipping TiBu step should not affect your ROM. It only backs up your installed apps with data, so you do not have to reinstall them one by one manually after you flashed.
ok thats exactly what i wanted to know. thanks for clearing it up guys.
Hi...I am hoping for an answer here. I have searched everywhere. I don't know if it even matters or why I should really care to do this but I am new to this and it seems I should. I am rooted and running 1.1 update with the stock eclair and have tried to run a Nandroid backup with clockwork, but it stops at "can't mount /system". Can anybody tell me why? or How to make the backup? One answer I saw referred to Gingerbread and EXT4 incompatibility with version 3.0.0.5, but I am in eclair and am running CWM 3.0.1.0.
Also do you really think I need to back up? I have a TiBU for my apps and sys data. I figure if anything goes really wrong I know I can always just redo from stock, just some more wasted time. I guess I am basically asking if there is any real advantage to do a CWM backup anyway at the stage I am at, beside just playing around?
Thanks in advance for any help
From what I understand you get that error until you flash the kernel that came with that recovery. I had the same error until I flashed this zip made by mistar muffin http://forum.xda-developers.com/showthread.php?t=971197&page=21 its the recovery and kernel in 1.
I always nandroid backup, just in case.
I'm stuck in a bootloop and cant figure out a way to boot directly into CWR 3.0.1.0. I tried a few different combinations thinking it would be like the N button and the power but have had no luck. HELP!!!
Still need help? Please
Thanks fro your attempt to help. I flashed 3.0.1.0 from Muffin, but still get backup error, can't mount/system. I have searched for hours for an answer, but there is nothing around about this. Am i the only one with this problem, except previous reply. It doesn't make any sense. I even restored to stock, updated to 1.1 and rerooted, so I would have the simplest system. Still same result. Can anybody help? Thanks
nevermind
Don't know why, but I asked ROM manager to backup and it worked. SO if anyone else ever has this issue maybe this will help.
I have recently flashed the JVS firmware from samsung firmware, and then followed that up with this CF-Root-XX_OXA_JVS-v4.1-CWM3RFS, flashing via the PDA section in ODIN. My phone has been working perfectly for a few days, no problems at all, until right now when I've gone to restart the phone.. I was having troubles with the market, and I turned my phone off mid-download of an app.. I'm pretty sure it was mid-download and not mid-installation of it..
However, when I turn my phone back on, it'll show the Galaxy S I9000 screen, then go to the next screen with the glowing S, however after that, it just gives a quick, short vibration, and seems to turn off, then do it all over again..
What does this mean? Is there a way I can get out of it without re-flashing the entire firmware? I am still able to get into download mode, but I don't want to lose messages that I have saved on my phone..
Any help is greatly appreciated..
Denno
Ok, so I let the phone go for a while (around 10 minutes), of the screens cycling through as mentioned above, but now it seems to have actually found a way into the phone, and has now loaded up properly.. However, I'm still interested in what the problem could be on the phone??
are u using new market app?
its happened to me once and i reflashed whole firmware starting from 2.1 to 2.3.5 lol just to avoid sh*t like that
When I had 2.2 on there, I had the new market app, however after flashing 2.3.5, it had the old market, so I was downloading apps from the old market at the time..
What do you mean you re-flashed whole firmware from 2.1?
Anyone else have any ideas?
Try to wipe factory reset and wipe cache or try to flash rom again
Wysłano z GT-I9000 z użyciem Tapatalk
Could be a corruption in the bootloader, if it happens again i would reflash. Otherwise just leave it i guess, maybe it was a one off
It happens pretty much all the time now.. I have reflashed the firmware a couple of times.. And it still seems to happen. What would wiping the cache remove? Will I lose any settings or anything that I have on the phone? I have been restoring backups made using titanium, however just apps and data, not system settings..
If it's the bootloader, is there any way of fixing that?
Thanks
Ah that could be the problem. Sometimes when you restore backup they can conflict and thus cause issues like this...
Try only return the data, that works for me. Get app list from the market and after a backup move to external sd. Format internal sd card. Then do an Odin flash with repartition checked. This is designed to get you back to factory state, so you will loose everything. Make sure your backups are not on your internal sd when you format. Also before you flash i think its a good idea to put a copy of your nandroid backup into the internal sd. Or just use a nandroid backup from when you phone was working fine.
Deleting cache does not delete your settings usually, however when deleting dalvick cache it can take up to 30 mins (max i think) to start you phone, but usually its 5/10 mins.
Yes bootloader can be fixed just find a flashable bootloader with a rom or the directions given. Use search for this
Ok thanks for the tips Talon.. Firstly, this nandroid backup that I keep hearing about.. What exactly is that? Is that the backup that I do through Clockwork Mod Recovery? I'm also unsure how to return just the data to apps? I had a look at Titanium Backup, and the only data recovery option is for system data.. Everything else I think I can handle..
Thanks
Yes nandroid backup is the backup through CWM. You should always do one BEFORE you flash anything on your phone. And keep them in a safe place and leave one in your internal sd card.
You should use titanium backup to backup up a single app at a time, not batch. This way you'll have more files and can choose which apps you want to return, and if you only want to return the data. (I have always done it this way, so i dont know if you can pick the apps you want to return if you do backup via batch.). Use the other app i suggested to keep the market links, so you download the app from market first then you install the data once its there.
I suggest you don't return any apps at first see how it goes, then add either a couple or one at a time, again only the app data. (Once you backuo the app individually, flash then, TB, backup/restore press on the app, restore, then pick data only...) If you go from froyo to GB i think you cant do it)
Thank you very much for your reply Talon. I am currently on JVS, and plan to re-flash this exact same firmware, which is the stock firmware, nothing custom..
As for what you've written, it's going to take me a few reads before I can get my head around it, but I just wanted to say thankyou for a quick and detailed reply. I think I might just bite the bullet and figure out which apps I actually use, and just work with them for now..
I'll post back soon hopefully with results.
After getting very frustrated with the phone, I've finally re-flashed back to a seemingly stock situation. Phone is running great, and all problems seem to be gone. Slowly re-downloading apps from the market as I feel that I need them, so I hopefully won't get any interference from the old backups I had..
One more question, how do you make your backups? If you say you don't use the batch mode in Titanium? I can't see any other way that's as easy..
Thanks for your help Talon.
As i said before, backup/restore click on the app you want to back up, and click backup. When you want to restore it, back to the menu, click on the app, click restore, then pick data only longer but safer
Change the location of TB to your exsd if you haven't already, then go to setting find, and it will make it default location
Ahk.. Sounds very time consuming.. lol..
Phone is running like a champ now . Thanks