Database Develop

Question about which 2.2 rom

Ok I have read basically all of the 'bible'.
My rogers captivate should be here tommorow i plan to root and flash it asap. Which 2.2 roms have HUSPA enabled; only deo? Or does cog?
Do I need to do anything to my rogers phone different then an ATT phone before flashing since it is named 96 not 97?
Thank you and sorry if this has been answered... I did read for about 2 hours before posting.

http://forum.xda-developers.com/showthread.php?t=749548
http://forum.xda-developers.com/showthread.php?t=821323
http://forum.xda-developers.com/showthread.php?t=808286
http://forum.xda-developers.com/showthread.php?t=803569
http://forum.xda-developers.com/showthread.php?t=816271

None of those are explaining to me this script to change 96 to 97?

nope, i just linked to the ones i actually knew the answer too.

But any custom rom I install will have all the ATT bloatware on it?

In theory you will already have been rooted meaning you can always remove any items you consider to be bloatware.

ralexand said:
In theory you will already have been rooted meaning you can always remove any items you consider to be bloatware.
Click to expand...
Click to collapse
Yes, i guess this is true..
Sorry I was stuck with an x10 until i lost it this weekend... I am not used to freedom... Sony can suck donkey nuts, I will never buy another product from that evil company.

slayp00n said:
Yes, i guess this is true..
Sorry I was stuck with an x10 until i lost it this weekend... I am not used to freedom... Sony can suck donkey nuts, I will never buy another product from that evil company.
Click to expand...
Click to collapse
*e-high-fives*

insaneturbo13 said:
*e-high-fives*
Click to expand...
Click to collapse
Thanks, ill report back.
My new laptop is coming tommorow so I don't know if i will have time to take care of both.

Bear in mind, at this time there is no way to go back to the original Rogers firmware if you are unhappy with whatever AT&T firmware you flash. And you may as well use either the Device ID or Android ID app to get your device ID before you flash.
There is now a way to get back to stock Rogers firmware.

opcow said:
Bear in mind, at this time there is no way to go back to the original Rogers firmware if you are unhappy with whatever AT&T firmware you flash. And you may as well use either the Device ID or Android ID app to get your device ID before you flash.
Click to expand...
Click to collapse
No way to go back? I thought after beta 6 of cognition you could flash back?
So even if i do a backup before flashing I cannot go back?

That's correct. ROM installations are not installed or backed up with backup software. There needs to be a ROM available of your shipped base ROM.
Here's an analogy based on a PC: You can backup XP; Then install Windows 7; But you cannot go back to XP from a backup of XP.
If I"m not mistaken, the closest you could come is to root your phone, install ClockworkMod Recovery, and make a Recovery Backup with that. (The PC analogy of this is 'making an image').
You could then restore that, but you would hvae a modified ROM. YOu can unroot that, and that would be the closest you would be to being back to stock.
One thing you want to be sure you do: after creating the backup, you want to copy that to your PC to be sure you don't lose it during any of your other activities.
One caveat: I'm not sure if the CWM supports your phone with your ROM, or if rooting is out for it, etc. You'll have to do a bit of due diligence before going down this path.

slayp00n said:
No way to go back? I thought after beta 6 of cognition you could flash back?
So even if i do a backup before flashing I cannot go back?
Click to expand...
Click to collapse
The only stock Rogers firmware available at the time I wrote that was a nandroid backup and no one had success using it unless they still had Rogers firmware on their phone. There is now an Odin flashable version linked in this post. People report that they still see an AT&T logo when they boot even after using this to go back to Rogers firmware (I do too on my AT&T phone flashed with it). I don't know if there may be other issues.

yeah all that stuff is ready, and i planned to do cwm, im fine if that will restore to a rogers FW...

then maybe ill stay on the Rogers fw untill either a completely debranded CM6.1 comes, or they build a COG off rogers... Apparently from my due diligence, the rogers fw has much better gps.

Restoring original backup

OK, when I first started into this stuff, I tried to follow all the guidance that has been given before flashing my first ROM. I did a ROM Manager backup of my ROM the way I got it from AT&T. I did not write down my ID # or anything else. I'm assuming the backup has all the information that came with it. My question is how to re-load that original ROM. I've flashed quite a few ROMs now using the Odin one-click to go back to stock and Master Clear and never had a problem. I'm running P9 right now (w/ no problems) and decided to try something else. After seeing some of the threads on here about your original phone IDs, I wanted to try and recover that info by restoring the original backup. I did that straight from P9, but now I just get locked up on the DG boot screens. I'm going to One Click it again but I'm wondering how I can restore back to my original with the backup that I have. Any guidance would be appreciated.
Thanks
My apolopies if this is already posted somewhere but I can't find it

You will get assistance in the Q&A section, this is not a ROM development related issue.
If you backed up correctly you would restore factory settings in recovery mode.
The best thing to do is to always save your original backup zip in clockwork to your SD card in case it gets overwritten.

[Q] Backup current Rom/eMMC?

As I'm reading about installing HC, Froyo or CM7 on eMMC, I'm curious about "saving" my current stock eclair rom in case I want to put it back...
If I make a CWM Recovery microSD, boot off that, do a backup... Can I just restore that if I want to get back to the way it is now? (assuming I just install something like Froyo to eMMC)

There are a few threads for stock recovery (check search). That will put it back like it was when you took it out if the box.
It's easier than trying to capture the partitions and data when someone else has already fine to all the trouble if doing it.
Sent from my KaosFroyo V39 Eris using XDA App

Thank you, I understand there are a few threads over in the developer section on how to get back to "out of the box" type stock, and I have read them and they all talk about using the done by someone else "images" or "roms."
They don't seem to apply as I've setup eclair pretty much the way I want to... so I am not looking for how to get back to "stock like out of the box"... but rather to the eclair as I have it setup now.
i.e. if I want to got back to eclair, I don't want to have to reconfigure everything all over again.

KidJoe,
Yes, you can do the backup like that, save it on your PC or something and restore later when you need it. I did that before.
Slu3

slu3 said:
KidJoe,
Yes, you can do the backup like that, save it on your PC or something and restore later when you need it. I did that before.
Slu3
Click to expand...
Click to collapse
Thank you for the confirmation.

[Q] Can't restore via CWM [fixed]

Hey guys,
I'm fairly new to the modding of Android phones (my previous phone was a TYTN II) and I'm having some problems restoring my backups via Clockwork mod (which is a bit of a pain in the ass for me, as I think you understand).
Ive tried to flash my phone and stuff, but I can't download apps from market/start google talk (I know this is related to eachother) when I have a mdc rom installed. This is not really the problem I'm asking a solution for, but the real problem is, that I can't go back to my old rom and stuff. I have rooted my phone, installed CWM, made a backup, but somehow it keeps freezing at the loading screen of the phone whenever I have restored a backup and reboot the phone.
Atm I have resetted my phone with NVFlash, I have not yet innstalled anything but I still have a backup which I'd like to restore. This is my situation:
LG-P990: Android 2.2.2, Baseband 1035.21_20110315 (I updated this with Paul's update), Kernel 2.6.32.9, Build: FRG83G, LGE version: v10b.
Anyone has an idea what I'm doing wrong? Did I miss a step in the process? Please help me out!

I'm no expert, so you should probably wait for one of them, but I had a similar problem and it's important to do a wipe before installing the ROM. (There's two wipe options, run them both)

novackus said:
Hey guys,
I'm fairly new to the modding of Android phones (my previous phone was a TYTN II) and I'm having some problems restoring my backups via Clockwork mod (which is a bit of a pain in the ass for me, as I think you understand).
Ive tried to flash my phone and stuff, but I can't download apps from market/start google talk (I know this is related to eachother) when I have a mdc rom installed. This is not really the problem I'm asking a solution for, but the real problem is, that I can't go back to my old rom and stuff. I have rooted my phone, installed CWM, made a backup, but somehow it keeps freezing at the loading screen of the phone whenever I have restored a backup and reboot the phone.
Atm I have resetted my phone with NVFlash, I have not yet innstalled anything but I still have a backup which I'd like to restore. This is my situation:
LG-P990: Android 2.2.2, Baseband 1035.21_20110315 (I updated this with Paul's update), Kernel 2.6.32.9, Build: FRG83G, LGE version: v10b.
Anyone has an idea what I'm doing wrong? Did I miss a step in the process? Please help me out!
Click to expand...
Click to collapse
please check if the DATE in your settings is correct. the rom I had previously installed was set to MAY and this made it impossible to use gtalk and download roms.
yeah sounds silly, but worth checking
ah well since you have reset already. but maybe you get back in the same situation at one time.

Thanks for the quick replies.
@Marco_ch: I already tried the date problem, literally went thru 100 of pages to find out what the issue was with the gtalk, but nothing helped, so I'm guessing I made a mistake with the rooting or something...
I already reset, but this is the third time I've reset, I've already tried flashing my device 3 times and each time I end up not being able download apps.
@Jakkelomme: As far as I know there is only 1 wipe option? Reset factory settings? I always do that before I install a rom yes.

well I had the same problem (gtalk, market) but I gave it another shot with this:
http://romkitchen.org/lg/?s=generator
its running brilliantly on my device. have you tried that one yet?

Tried it a few days ago, when it was anotehr version, might try it again now, thanks. Which options do you suggest (I'm not that much of an expert )
Edit: Though i wish someone had a solution for me not being able to restore via CWM!

oh you dont want suggestions from me - I have that device for a couple of days only and dont even know how to properly make a backup
but I chose the following:
EXT 4
Pauls Kernel
Left out all the LG Stuff as I find it kinda useless and laggy
good luck!

marco_ch said:
oh you dont want suggestions from me - I have that device for a couple of days only and dont even know how to properly make a backup
but I chose the following:
EXT 4
Pauls Kernel
Left out all the LG Stuff as I find it kinda useless and laggy
good luck!
Click to expand...
Click to collapse
Did everything you asked, installed new version of Romkitchen with the stuff you suggested... Still doesnt download appss. Still stuck at "Starting download...". Help, anyone?

Nevermind guys, I fixed it. Turned out the problem WAS with date & time. My provider made the date 12/05/'11 instead of 12/04/'11. It was why I couldnt download from the market. Thank you all for helping out anyway

[Q]Andromeda 3,phoenix unleashed and more..

Here are my doubts: Captivate on 2.2 no root
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
5)Do I need to go back to stock every time I want to flash a different rom?
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.

Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.

jmtheiss said:
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Click to expand...
Click to collapse
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom

DudeWatsThat said:
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
Click to expand...
Click to collapse
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.

jmtheiss said:
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
Click to expand...
Click to collapse
Thanks again
I don't plan on flashing 2.3 roms until the official 2.3 release come out
Theres a Odin that flashes stock 2.2 instead of 2.1 can I use that one instead?

Theres a Odin that flashes stock 2.2 instead of 2.1
Click to expand...
Click to collapse
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?

jmtheiss said:
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
Click to expand...
Click to collapse
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.

DudeWatsThat said:
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
Click to expand...
Click to collapse
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.

jmtheiss said:
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
Click to expand...
Click to collapse
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?

DudeWatsThat said:
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
Click to expand...
Click to collapse
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)

jmtheiss said:
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
Click to expand...
Click to collapse
Eh i got it into download mode and i pressed start on odin but i think its stuck did i have to root first and then use odin im kinda scared right now
Edit:its showing a phone a warning sign and a Pc like connect phone to pc

I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)? It should look similar to the attached file.

jmtheiss said:
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)?
Click to expand...
Click to collapse
Eh yes its i managed to trouble shoot it and its reboting everything is ok and yes it did show a yellow text box as of right now i just need to pop in the sym and reboot i have succesfully flashed 2.1 i just need to root and get CWM thru Room manager correct me if im wrong.

I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.

jmtheiss said:
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
Click to expand...
Click to collapse
I just rooted now all I need is CWM and thank you for all your help!

Glad it worked out. Don't be afraid to ask more questions in the future, as a reply to a question you've asked could help someone else with the same question out.

Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.

Miami_Son said:
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Click to expand...
Click to collapse
I did ALOT of searching before thinking of posting this,the reason I did it was because most of the post are from 2010 and I had doubts on if I should use those methods or if there where new ones.This is the Q&A sub-forum right?I did just that ask questions.