Hi,
I just got my N1 and I'm very disappointed. As soon as I got it i updated to 2.2. For some reason I can't get 3G, it defaults to Edge. Does anyone know of a way to work around it so I can get my 3G speed?
Thanks In advance
Did you make sure your ordered the right N1? For Fido I would think you need the Rogers AT&T model as opposed to the T-Mobile one.
Also go into your dialer, type *#*#4636#*#*, go to phone information and loo at Set preferred network type and see what it says there but those things rarely get changed, if it doesn't say WCDMA preferred that'd be weird unless you wee already tinkering with the settings.
If it says GSM only than that would be your issue, set it to GSM Auto (PRL) which generally gives better battery than WCDMA preferred. Alternatively you can test setting it to WCDMA only which would force it into 3G mode but then if you don't pick up a 3G signal, you won't get anything at all which is what im betting will happen in your case.
Thanks.
It was set to WCDMA prefered. I set it to GSM auto like you suggested.
So are you saying there's nothing I can do to get 3G to work on this phone with Fido?
You can also try double checking the APN settings. Here is how:
1. Go to Settings > Wireless & Networks > Mobile Networks > Access Point Names
2. Press the Menu button > New APN
3. Name: set it to anything like "Fido 3G"
4. APN: internet.fido.ca
5. Usename: fido
6. Password: fido
7. APN Type: default
8. Leave everything else as is
9. Press Menu button > Save
10. Now from the list, tap the radio button next to this new APN created.
Give it couple minutes, and it should switch to 3G.
Let me know if that fixes it.
Already tried that and it didn't make a difference.
Thanks
Jep4444 said:
Did you make sure your ordered the right N1? For Fido I would think you need the Rogers AT&T model as opposed to the T-Mobile one.
Click to expand...
Click to collapse
That's it, most probably. Especially if you have the Developer N1 (you just got it, so if you got it new, you definitely got a wrong one).
In this case, you'll see no 3G.
I believe after the 2.2 update, The APN is automatically generated by the phone.
msavic6 said:
I believe after the 2.2 update, The APN is automatically generated by the phone.
Click to expand...
Click to collapse
doesn't stop my phone from getting it wrong every time
msavic6 said:
I believe after the 2.2 update, The APN is automatically generated by the phone.
Click to expand...
Click to collapse
Yea, not for Fido. I get the GPRS and WAP only with 2.2
Sent from my Nexus One using XDA App
Im on fido aswell and it gets the correct setting since im able to connect to 3g and browse websites over 3g.
melwan said:
Yea, not for Fido. I get the GPRS and WAP only with 2.2
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Sent from my Nexus One using XDA App
msavic6 said:
Im on fido aswell and it gets the correct setting since im able to connect to 3g and browse websites over 3g.
Click to expand...
Click to collapse
There are 2 different Nexus models. Look it up.
I obviously know there is 2 models he was talking about the wap and GPRS APN , all i said was my phone gets the correct 3G APN.
Related
Hi all,
i am on O2 Germany network and using AT&T nexus one.
i get 2-3 bars of HSDPA(H /3G, 2-3Mbps) network at my work location but if i move little far from my seat (near to window) i get only GPRS(30-50 Kbps) network but my friends Iphone manages to get Edge network on same provider which my Nexus is not able to get.
can anyone tell me why is it happening so and also i have tested selecting EURO band under phone info settings but no use
TIA
go into the dialer and type *#*#4636#*#*, go to phone information and tell us what setting is selected under Set preferred network type
Jep4444 said:
go into the dialer and type *#*#4636#*#*, go to phone information and tell us what setting is selected under Set preferred network type
Click to expand...
Click to collapse
WCDMA Preferred
Sent from my Nexus One using XDA App
chowdarygm said:
WCDMA Preferred
Click to expand...
Click to collapse
hmm thats not the issue then as WCDMA preferred can still grab an Edge signal, have you tried turning 3G off and see if you can grab Edge anywhere?
i have switched off 3G too but still i am not getting Edge........
can anyone help me plzzzzzzzzzz
Bump.......for the convenience of all to see and help me out
Seems to me you're never going to get 3G, so I'd personally set it to one of the other options, not WCDMA. Don't have the phone in front of me but think the option to pick is clear if you're only going to get EDGE.
Pulled from the Inspire forums and can confirm working mod.
PROCEDURE FOR ROMS WITH A SINGLE LOCKED APN:
If your APN is locked (it shows the lock symbol and you cannot change the settings), then we're just going to add a second one.
From the APN screen, press Menu>>New APN. Here are the settings for your 2nd APN. Everything is case sensitive and must be entered exactly as below.
Name: Media Net (if your 1st locked APN is named Media Net, then just name this one Media Net2 - this name in this field isn't important as long as it's unique)
APN: Phone
MMS protocol: WAP 2.0 (this option might not be in your APN, so don't worry if you don't see it)
MCC: xxx (Don't change this number)
MNC: xxx (Don't change this number)
APN type: default,admin,hipri (notice there are no spaces between the words and the commas)
APN protocol (if applicable): IPv4
Everything else: <Not set>
Once you have the above settings entered, press menu and save. You will exit back out to the APN selection screen. Now you need to select the little round button for the new APN (Media Net/Phone) that you just created. Your phone's data connection will drop for several seconds as it switches to the new APN, and then come back. If you find that your connection doesn't "stick" on the 2nd APN (i.e. the selection button keeps reverting back to the 1st APN) then reboot your phone and try selecting the 2nd APN again.[/COLOR][/B] It is mandatory that the 2nd APN is selected in order for the speed benefit.
We're done. If something went wrong and you need to revert back to your default APN config, from the APN selection screen just press menu and select "Reset to default".
Will this allow tethering without the tethering plan?
Thanks I can confirm it works great no need to root my phone now
Sent from my HTC PH39100 using xda premium
geek_riot said:
Will this allow tethering without the tethering plan?
Click to expand...
Click to collapse
Correct. I am on a $30 Unlimited LTE data plan no tethering but have it enabled with this mod.
Noodles5666 said:
Correct. I am on a $30 Unlimited LTE data plan no tethering but have it enabled with this mod.
Click to expand...
Click to collapse
Awesome!! Thanks!!
Even better it drops us off of LTE, i.e. we can now turn the darn thing off and save some battery
This doesnt let you use LTE 4g while doing tetherning. After adding this apn it kicks you to the HSPA+ 4g.
But this is an easy way to create an easy way to switch between LTE and HSPA+
Edit: also it didnt allow me to do tethering. Said i had to dial 611 and get it added.
I seem to be doing something wrong... I made the second APN and activated it. When I try to use the WiFi Hotspot App, I get a message about adding tethering. Should I be using a different app?
jason.hamilton said:
This doesnt let you use LTE 4g while doing tetherning. After adding this apn it kicks you to the HSPA+ 4g.
But this is an easy way to create an easy way to switch between LTE and HSPA+
Click to expand...
Click to collapse
This may be but my internet icon has not changed. Showing 4G but that is probably due to the market I am in is not an LTE market.
Noodles5666 said:
This may be but my internet icon has not changed. Showing 4G but that is probably due to the market I am in is not an LTE market.
Click to expand...
Click to collapse
Yea when you are on the 4g LTE network, there is a little LTE underneath the 4g symbol
geek_riot said:
I seem to be doing something wrong... I made the second APN and activated it. When I try to use the WiFi Hotspot App, I get a message about adding tethering. Should I be using a different app?
Click to expand...
Click to collapse
Have you followed step by step? Yes? Then have you tried rebooting the phone?
Is there any way you can update that APN to work with LTE 4g.
jason.hamilton said:
Is there any way you can update that APN to work with LTE 4g.
Click to expand...
Click to collapse
Sorry as of now I don't have a way. Will be figuring that out shortly.
Does not work for me.
Followed steps and reboot. No good.
Not Working
It works for a second and then it reverts back to that you need a tethering plan. Any other info. Thanks
z45123 said:
It works for a second and then it reverts back to that you need a tethering plan. Any other info. Thanks
Click to expand...
Click to collapse
I've ran it for about 2 gigs today and had no issues. Also once you turn it off the next time you wanna do it you will have to switch back to the stock APN and then back to the one you made. It's not perfect but it's better than nothing right now.
I didn't use these settings to enable tethering, but I entered them just to get ANY sort of data connection. It definitely solved my issues. Thanks a lot!
Won't revert to default
I set up an apn for hspa+ before I could get a 4g sim. I've switched sims and now I wanted to go back to default and it said I had no data due to an apn error. The radial box is selected for the original apn.
It would work for a second and my laptop would see the network but quickly went back to telling me to go to AT&T and get a tethering plan. However Having the second APN seems to help when the data gets flaky, which is VERY often. Speeds are erratic and I often can't get ANY data.
Sentinel
would love to see this work with the LTE connection.
Droid 4 On Rogers Wireless (Canada) - Incoming "Pay Phone" caller ID Solution
I recently got my XT894, Droid 4 in the mail, and hooked it up to Rogers Wireless in Canada.
When I was receiving phone calls, the built in dialer would tell me that "Pay Phone" is calling, the solution to contact the Rogers Customer Care, and have them remove the "Name Display" option.
Rogers has 2 services for call display:
Name Display (which does a phonebook lookup from Roger's Side)
Call Display (the number of the dialer who is trying to dial you)
Most motorola radios don't actually support these 2 features together, so Blur reads it as "Pay Phone". After contacting Customer Service, have them remove ONLY "Name Display". I restarted my phone then everything started working properly again.
I hope this helps someone!
First off, I wanted to say that I'm on the leak 6.16.206
I also got mobile hotspot working on Rogers (this solution may apply to other rooted users running on different providers).
I added the APN settings as defined originally here: http://forum.xda-developers.com/showpost.php?p=20366961&postcount=2
Name: Rogers Tethering
APN: isp.apn
MCC: 302
MNC: 720
APN type: dun
otherwise, any other fields are showing as <not set> OR None
When I tried to add dun to the apn type, the moto UI told me only providers could add DUN types, so I went into SQLite Editor -> Phone/Messaging Storage -> telephony.db -> carriers -> Located the last APN which I added manually, scrolled over to "type" then long pressed that field, chose "edit field" and added dun. Once completed, I restarted my phone. I now have the stock mobile hotspot app working (I had to also disable the entitlement check earlier) on Rogers!
Now wait, you got a Droid 4 working on Rogers????
bean1975 said:
Now wait, you got a Droid 4 working on Rogers????
Click to expand...
Click to collapse
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS
I can confirm that the Droid 4 works on Rogers. Took a week of fiddling, but it works.
Received the Droid 4 with 2.3.4 installed. Did the over-the-air updates to 4.0.4. Rooted it, installed SafeStrap 3, and installed Olegfusion's CM10/JB ROM (4.1.2), and was off to the races. Shows "E", "3G", and "H" when accessing the Internet.
have you ever try with stock kernel?
I wonder not to update to CM10 right now. I have a problem, it seems to connect, 3G/H letter, bu no tranmition. I have an old jaj, Droid3 working perfectly with same APN records.
Any thing that could help me??
danifunker said:
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS
Click to expand...
Click to collapse
Please help... What does that mean?????
(I'm an imbecile about this stuff!)
heymon79 said:
Please help... What does that mean?????
(I'm an imbecile about this stuff!)
Click to expand...
Click to collapse
LTE on this phone is not compatible with the Rogers network. If you want a Rogers LTE phone, pickup the Motorola RAZR HD. The phone will operate on 3G or 3.5G, although we in Canada consider HSPA+ to be "4G".
LTE can give you rates of up to 100mbps usually gives you about 25-30mbps
HSPA+ can give you rates up to 12-15mbps I usually get 4-5mbps
I hope that helps!
how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?
imeem said:
how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?
Click to expand...
Click to collapse
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html
danifunker said:
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html
Click to expand...
Click to collapse
so you're saying that all droid 4 are already unlocked?
Yes. They are still blocked against US GSM carriers but will work fine everywhere else, no locks.
Sent from my DROID4 using Tapatalk
Maybe someone can help me, I'm on Rogers. I have this same issue on Stock ICS .217 and on CM10. I can make phone calls and send text messages, but I cannot receive either. When I put my sim card in to another phone, I start getting my text messages. Any ideas on how to remedy this?
Have you tried another SIM card in your phone? Sounds like you have something wired. I would also check to make sure you are in global mode on the phone.
Sent from my XT894 running CM10
BTW where did u guys get your droid 4 if you're from canada? from ebay?
imeem said:
BTW where did u guys get your droid 4 if you're from canada? from ebay?
Click to expand...
Click to collapse
I got mine from xda but now that's closed...
Sent from my XT894 running CM10
eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.
Terrible Reception on Telus (stock 217, -100dBm)
bean1975 said:
eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.
Click to expand...
Click to collapse
I went through the process today and got my stock Verizon 217 Droid 4 working on Telus. I verified the Telus APN settings, went through forcing GSM/UMTS and UMTS-only mode, but still have terrible reception: 1-2 bars, -100dbM. Any thoughts for getting better signal?
[SOLVED] DROID 4 Canada SMS/voice only, no data on Rogers/Fido - help!
SOLVED! see below.
Droid 4 from Ebay, $135 or something + shipping. Replacing my string of bad luck with i927's from smartphone_wholesale (aka Cell Phone Forever) on ebay (tho the 1st one they sent was great til i lost it).
SMS/Voice is fine but cannot do any cell data on it. Following all settings on fido's site for APNs the fido-core-appl1.apn doesnt work. Had to manually put it in (APN list was blank). Tried my wife's Roger's sim, it populated the APN list itself (4 of them, all combos of internet w or w/o MMS, and rogers +/- 'internet' in the name). None of them work either (they match what's in the fora here and on the rogers site, rogers-core-appl1.apn etc).
Im a bit of a newb: is my phone not unlocked properly or something? What gives? Radio is set to global or GSM/UMTS (CDMA doenst work of course). What's the solution here?
System version: 98.72.18.XT894.Verizon.en.US
Android Version: 4.1.2
Baseband Version: CMDA_N_05.25.00R LTEDC_UI_09.1D.00
Kernel: 3.0.8-g473e586
Build #: 9.8.20-72_VZW-18 Feb 8 13:11:57 2013
yes mobile data is on (and roaming set to yes but phone states it's not roaming now)
every time i've added apn's and saved i've rebooted (and rebooted twice with wife's SIM in too, in case settings had to go sim -> phone + reboot, etc). No luck any way ive tried.
Thanks for help.
[UPDATE]
belay that request cadet!
Ok I just removed the wife's sim and put mine in, rebooted, and this sim (fido) doesnt populate the APN list. I was in the middle of inputting settings for it, hadn't finished and a buncha text+ came in and wifi is off (I saw I was on Edge, big blue E on status bar). Then before I could even react I had hit save, and data turned off.
Yep, removing "internet" from the APN 'type' works fine. Leave it blank.
W t f. Maybe someone can explain that shiz to me.
like my phone can just sit on 3G, in the same place,while not moving
but if i reboot my phone, it'll pop on to LTE (if its available in that area)
but i reboot it in known LTE areas (when showing 3G)
anyway to force LTE, without rebooting the phone?
or is there some time schedule where it checks to see if LTE is available that I can change?
Yes which model u have? Its in the secret menu
Sent from my LG-D959 using Tapatalk
Sprint version
SayWhat10 said:
Sprint version
Click to expand...
Click to collapse
I don't have the Sprint version so I don't know if this works but you can try https://www.youtube.com/watch?v=bSrtUw8D9_w as this method worked for the very similar LG G2 for Sprint.
I feel for you buddy because this phone is blazing fast on LTE
Sent from my LG-D959 using XDA Premium HD app
He didn't even have to say he was on the Sprint version.. I just knew. Hehe
Visa Declined said:
He didn't even have to say he was on the Sprint version.. I just knew. Hehe
Click to expand...
Click to collapse
Hahaha you're absolutely right. I knew just by reading the thread. Sprint is the worst! My HTC One on Sprint was amazing but I couldn't ever hold on to an LTE connection for more then 30 seconds. Unlimited data is useless if your only on their horribly slow 3g
Sprint does suck, if i didnt have 4 other people on my account that would have to get new phones/account etc, I would have been switched.
but that video i think was to turn on LTE, my LTE is on, but for some reason wouldnt search/connect to LTE when it was available all the time
however i went into my mobile connection settings, and changed it from "LTE/CDMA" to Global
now it seems to switch to LTE when its in an LTE area. LTE icon comes up without me having to reboot, i'll keep a watch on it for a few days to see if indeed that was the solution
by the way, anybody now what the "global" option is? compared to LTE/CDMA
SayWhat10 said:
Sprint does suck, if i didnt have 4 other people on my account that would have to get new phones/account etc, I would have been switched.
but that video i think was to turn on LTE, my LTE is on, but for some reason wouldnt search/connect to LTE when it was available all the time
however i went into my mobile connection settings, and changed it from "LTE/CDMA" to Global
now it seems to switch to LTE when its in an LTE area. LTE icon comes up without me having to reboot, i'll keep a watch on it for a few days to see if indeed that was the solution
by the way, anybody now what the "global" option is? compared to LTE/CDMA
Click to expand...
Click to collapse
I'm pretty sure the global setting is to allow it to connect to GSM carriers in the event that the device is unlocked and the APN is changed accordingly.
I have the same problem in brazil, looks like a problem with the Phone. I had a Samsung S4 that worked with full signal in 4G in my home, now that I moved to LG G Flex it also works full signal 4G in home, but when I move to some place where is Edge then go Back to home, it never moves back to LTE automatically. I need to restart or change the NetworkMode manually to make it back working in 4G.
I think the phone has a problem to automatic search and change the Network mode.
anyone know how to enable only lte yet? i've tried all different kinds of secret menu codes and cant figure it out.
Answer
How to access the hidden service menu on LG G Flex:
For AT&T: Go to dialer and enter 3845#*950#
For T-Mobile: Go to dialer and enter 3845#*959#
For Sprint: Go to dialer and enter 3845#*995#
Once you're in the hidden menu, go to LTE-Only > Modem Settings > RAT Selection > LTE only
Enjoy!
-Curt
I apologize in advance if this has been addressed before. I'm running stock-rooted 5.0, stock kernel, and what I think(?) might be the radio for 5.0.1 I'm not sure... APN settings are correct and in the *#*#4636#*#* Phone Info menu I'm using LTE/GSM/CDMA Auto (PRL). Do I need to double check my radio or do something else? I'm on T-Mo with the TRULY Unlimited data plan. Any suggestions?
radios
Gorjira said:
I apologize in advance if this has been addressed before. I'm running stock-rooted 5.0, stock kernel, and what I think(?) might be the radio for 5.0.1 I'm not sure... APN settings are correct and in the *#*#4636#*#* Phone Info menu I'm using LTE/GSM/CDMA Auto (PRL). Do I need to double check my radio or do something else? I'm on T-Mo with the TRULY Unlimited data plan. Any suggestions?
Click to expand...
Click to collapse
Are you sure there is no LTE. I believe come of the notification icons are finicky. In other words, on mine someone it will show extremly low service bars but does not affect my phone? or data in any noticable way. Also are you in a bad service area?
What does the top right say? Have you received lte on previous devices being in the same location where you are now?
Sent from my Nexus 6 using Tapatalk
Gorjira said:
I apologize in advance if this has been addressed before. I'm running stock-rooted 5.0, stock kernel, and what I think(?) might be the radio for 5.0.1 I'm not sure... APN settings are correct and in the *#*#4636#*#* Phone Info menu I'm using LTE/GSM/CDMA Auto (PRL). Do I need to double check my radio or do something else? I'm on T-Mo with the TRULY Unlimited data plan. Any suggestions?
Click to expand...
Click to collapse
Radio for 5.0.1 ends with .04R. Do you ever show LTE in settings, see my screenshot. I've got Verizon obviously but with TMo you should get LTE too. If you have another phone stick the sim card in it and see if you get LTE in the other phone. If not could be the sim. Could be bad signal area too. FWIW TMo LTE is band 4 and soon to come band 12.
Wow. Thanks all for responses. @vvveith I am in an excellent service area LTE for miles! @zephiK Yes I used data over LTE on my Nexus 5 just fine. @jawmail Yes my radio ends with .04R. Sadly I do not have another phone nor SIM card adaptor to try your method with. Would the newer radio make my data signal fluctuate b/w 3G, H, and LTE? I understand that this is a different phone but I swapped radios on the Nexus4/5 all the time and it never hurt anything.
Gorjira said:
Wow. Thanks all for responses. @vvveith I am in an excellent service area LTE for miles! @zephiK Yes I used data over LTE on my Nexus 5 just fine. @jawmail Yes my radio ends with .04R. Sadly I do not have another phone nor SIM card adaptor to try your method with. Would the newer radio make my data signal fluctuate b/w 3G, H, and LTE? I understand that this is a different phone but I swapped radios on the Nexus4/5 all the time and it never hurt anything.
Click to expand...
Click to collapse
1) Did you get LTE on the 5.0 Radio?
2) Try setting it to LTE/GSM auto (PRL) instead
3) When you say APN is correct. Which one are you using / looking for? Ensure it is T-Mobile 4G LTE IPv6 (if its already on IPv6 try IPv4)
If worst comes to worst, go to the T-Mobile store and get a free SIM card replacement, if they don't want to give you a free SIM. Give them a call, it'll take a couple days to arrive but T-Mo employees are quite nice about giving SIM cards. Especially since you paid for a N6 which is expensive.
zephiK said:
1) Did you get LTE on the 5.0 Radio?
2) Try setting it to LTE/GSM auto (PRL) instead
3) When you say APN is correct. Which one are you using / looking for? Ensure it is T-Mobile 4G LTE IPv6 (if its already on IPv6 try IPv4)
If worst comes to worst, go to the T-Mobile store and get a free SIM card replacement, if they don't want to give you a free SIM. Give them a call, it'll take a couple days to arrive but T-Mo employees are quite nice about giving SIM cards. Especially since you paid for a N6 which is expensive.
Click to expand...
Click to collapse
1.)Yes i did and it was much more reliable.
2.)Overnight I switched b/w those two settings and kept getting the same result.
3.)I switched the APN to IPV4/6 and that seemed(?) to have solved it.
This has been going on for a couple days so I might see if I can get a new SIM.
Gorjira said:
1.)Yes i did and it was much more reliable.
2.)Overnight I switched b/w those two settings and kept getting the same result.
3.)I switched the APN to IPV4/6 and that seemed(?) to have solved it.
This has been going on for a couple days so I might see if I can get a new SIM.
Click to expand...
Click to collapse
I cannot find where set the APN don't see under More, Cellular. I can VZW where can I find the APN on N6?
parcou said:
I cannot find where set the APN don't see under More, Cellular. I can VZW where can I find the APN on N6?
Click to expand...
Click to collapse
You had it right, its under more > cellular > access point names (APN), then select your carrier.
hanano17 said:
You had it right, its under more > cellular > access point names (APN), then select your carrier.
Click to expand...
Click to collapse
For the rom I am on I don't see under cellular the option for APN. Do I have to be back to factory to see it.
Sent from mobile...excuse typos!
parcou said:
For the rom I am on I don't see under cellular the option for APN. Do I have to be back to factory to see it.
Sent from mobile...excuse typos!
Click to expand...
Click to collapse
With custom Roms its hard to say. Safest answer would be yes go to factory
Sent from my Nexus 6 using XDA Free mobile app