Database Develop

4gb sd card, not detecting in o2 xd ii s

have updated to wm6.1 but still not able to use 4gb sd card. please let me know of any software which allows the same.

if ur card is sdhc u cant use it on ba.

how I upgrad my k-jam by sd card

is there any way to upgrad my K-jam by useing the sd card as some other devices like jas jam by renameing the rom file and save it on the card
I mean to flash with out cable just by the card
my device dos't make any connection with the computer so I use the cable only to charg the battery

No, htc devices doesn't use that method.
SD method in htc is only suitable for unlocked G3 wizard, and the SD image can only be generated from a working unlocked G3 wizard, you can't generate the image from ROM file.

I did that but in other way I could to copy the new rom from other k-jam device to my sd card then i put the card in my device
but now I haven't an other k-jam device I only have the one how has a problem in usb
by the way I unlocked my device and it 3g

flashing blackstone micosd blacimg.nbh is not recognized

hi,
im trying flash blackstone via microsd card /1gb kingston, 128MB sandisc, 128MB nokia, 512MB sandisc cards formated fat32 in windooze, linux, many different format software used....
my blackstone has SPL-1.54.0000
on the card is only one file blacimg.nbh
i have renamed to BLACIMG.hbh, blacimg.NBH but none of that works. i still cant flash blackstone SDcard way. before when i used 1.14 HardSPL method worked with micoSD cards im using now, but now nothing.
i do have this problem because i dont have pc with windooze installed, i have to go to neighbour and flash it there via usb that works well, but no SDcard.
help me please im searching for answer too long.
thanks

pilnik11 said:
hi,
im trying flash blackstone via microsd card /1gb kingston, 128MB sandisc, 128MB nokia, 512MB sandisc cards formated fat32 in windooze, linux, many different format software used....
my blackstone has SPL-1.54.0000
on the card is only one file blacimg.nbh
i have renamed to BLACIMG.hbh, blacimg.NBH but none of that works. i still cant flash blackstone SDcard way. before when i used 1.14 HardSPL method worked with micoSD cards im using now, but now nothing.
i do have this problem because i dont have pc with windooze installed, i have to go to neighbour and flash it there via usb that works well, but no SDcard.
help me please im searching for answer too long.
thanks
Click to expand...
Click to collapse
You do not have correct SPL to flash. If your using USPL, you need to re-use it before every flash so your SPL would say 1.15.USPL. If your using HSPL, you need 1.56.HSPL for roms based on 1.56+ and 1.14.HSPL for roms based on pre 1.56
Please read and post further queries on flashing within this thread
Thread closed

Upgrading BA

Hey, im going to upgrade for the first time but have a few questions, in bootloader mode it says v2.08 but on the tutorial it says it should show 2.06 or 2.07 would it matter? i also heard to put unsigned roms on it has to be cid unlocked, but i cant find the unlocker anywhere. I am also having a problem, on the vista extra step, at step 8 both my computers does not show "Mobile Devices" and my final question, im a bit confused with the SD card, it says "Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled)." and i cant not find anything else about it untill i read "(if removed earlier) Put back your SD Card before you do the setup. This way the installation from the SD will continue after you have done the setup" thats confuses me, what installation from the SD card?
Thanks in advance.

from what ive seen the blueangel doesnt need to be CID unlocked. or at least, i've never seen a referance to CID unlocking for the blueangel.
thats about all i know. sorry i cant be more help

oh ok, thanks for the reply

extrom on SD card
i would assume it will install the extrom which you COULD store on the SD card. So if you insert the SD card (with the extrom on it) before the setup, then the BA will install that.

ah i see, just to figure out the vista problem hopefully it will work once i have windows 7. Thanks

MTTY question

hello
I know what MTTY is and what for
my question is - can I perform MTTY sequence like in Diamond 1 but without micro SD card ??
Just put ROM to internal memory ??

you can erase your current ROM with MTTY and then install any new ROM from you PC by entering boot loader mode. You don't need SD card in this case.