MTTY question - Touch Diamond2, Pure Q&A, Help & Troubleshooting

hello
I know what MTTY is and what for
my question is - can I perform MTTY sequence like in Diamond 1 but without micro SD card ??
Just put ROM to internal memory ??

you can erase your current ROM with MTTY and then install any new ROM from you PC by entering boot loader mode. You don't need SD card in this case.

Related

Backup of ROM

All,
I have a MDAIII and I would like to back up my current ROM.
I have followed the steps outlined here
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151&PN=1
to extracting the rom using NTRW.exe version 2.
Now when I try to restore the ROM I use ‘ntrw.exe write myrom.nb1 h:’ and put the sd card back into the phone and put it into bootloader mode but the phone does not boot from the SD Card. I have tried a 256mb and 1gb sd card but the phone does not display a confirmation to upgrade - can anyone help?
Thanks
Msuk

Need some help on restoring rom

Hi Guys
I have the vodafone rom for the BA which ends with *.nb1.
I have tried to get it onto the SD card using xdatools but it always errors out saying not able to read the sector. Is there another way of putting this onto the SD card so i can flash my BA from the SD card in bootloader mode.
Thanks
Lordao

how I upgrad my k-jam by sd card

is there any way to upgrad my K-jam by useing the sd card as some other devices like jas jam by renameing the rom file and save it on the card
I mean to flash with out cable just by the card
my device dos't make any connection with the computer so I use the cable only to charg the battery
No, htc devices doesn't use that method.
SD method in htc is only suitable for unlocked G3 wizard, and the SD image can only be generated from a working unlocked G3 wizard, you can't generate the image from ROM file.
I did that but in other way I could to copy the new rom from other k-jam device to my sd card then i put the card in my device
but now I haven't an other k-jam device I only have the one how has a problem in usb
by the way I unlocked my device and it 3g

Sd card not active in my phone !!!

Sd card not active in my phone !!!
Hey, i need a tweak to reconize the sd card in my phone, dunno what appened bet my sd card is not active in my phone,
Please, HELP me !!!
Edit : i can flash my phone with the sd method but when go to file explorer in windows mobile cant read the sd storage card
conclusion : the sd card work but cant see it in wm
have ya tried to format that from PC?
dont forget to use fat32 mode...
It could be the ROM. which ROM are you using?
Ok, i m sure its the rom i tried !!!
Touch X INFINITY 2.0B ULTIMATE X-TREME [WM 6.5]
This rom bugged my phone in 2minutes in wm !!!
soft reset always...
Remember, i cant see my storage card in windows mobile and windows seven !!
so i cant format it !!
when tried to re-flash my phone i used sd methode and its worked but only this os working.
But how can i change this rom otherwise the sd methode ?
What can i do in reality te repear it cant use my phone to call friends atm...
Edit : setting, connection, usb to pc, tried the two option (activesync and disk drive) but the two are same, cant see the sd card in windows !!!
Please help
Take a Custom_RUU and flash with PC any Rom!
Tried this utility : X1_RUU_ROM_UpdateUtility
ftp://x1:[email protected]/XperiaX1/TOOLs/X1_RUU_ROM_UpdateUtility.zip
installed some other rom and its working, i see my storage card now thanks all

No image file !

hello all ! i have a problem with my xperia x1 . when i try to update my xperia to wm 6.5 , it shows No image file ! any help please,
Happens to me if i try flash from MicroSD.
If i try flash with an 8GB Samsung (Class 6) card, i get that error.
If i use my 1GB MicroSD card with the .IMG file, it flashes fine.
I always use the USB method though, flashes perfectly all the time
try formatting your microsd card as a FAT or FAT32 file system.
before placing the img onto your card.
I've this problem to!
I tryed usb method! When all done, my MS 8GB died!
=/
i format my micro sd in fat 32 , it's work , but it's shows "loading" and he stop there ! what i must to do ?? please ? excuse 4 my bad english
Maybe is problem with .nbh file. Some error during download. Try to download it again and than flash new file.
Try to do with Rom Update Utility!
I had the same problem too!! :O
SO I used the software one.... via USB... it worked... but I would like if all I need is the SD card... So that it can work on it's own...
I feel like a serious problem might happen and brick the phone... lol
rename (ruu_signed.nbh) to (Kovsimg.nbh)
So, here is how to flash new ROM with SD card :
0. Make HardSPL on device
1. Download ROM you want
2. Format SD card in PC with FAT32
3. Copy .nbh file on root of your EMPTY SD card
4. Rename .nbh file on card. It MUST be Kovsimg.nbh
5. Turn off your device and put SD card in. (it woud be good if battery is >50% full)
6. Press and hold Vol down and Power key until you see 3 color screen. Than release keys
7. Follow on screen instructions
8. After flashing is over, HARD RESET device.
9. After hard reset, SOFT RESET
Voila, enjoy your new ROM!
(steps 7 and 8 are here to be sure that every thing is in it's place)
(Take NO responsibility for bricked device )
U just use Check Disk Local in PC scaning micro sd whit connect USB (remember tick: Automaticcally fix file....) > OK
reformat ur card with fat32 and choose the largest available file allocation unit size when you format (it should be 32k....)
Moved to Q&A, Not ROM Dev

Categories

Resources