how I upgrad my k-jam by sd card - 8125, K-JAM, P4300, MDA Vario Software Upgrading

is there any way to upgrad my K-jam by useing the sd card as some other devices like jas jam by renameing the rom file and save it on the card
I mean to flash with out cable just by the card
my device dos't make any connection with the computer so I use the cable only to charg the battery

No, htc devices doesn't use that method.
SD method in htc is only suitable for unlocked G3 wizard, and the SD image can only be generated from a working unlocked G3 wizard, you can't generate the image from ROM file.

I did that but in other way I could to copy the new rom from other k-jam device to my sd card then i put the card in my device
but now I haven't an other k-jam device I only have the one how has a problem in usb
by the way I unlocked my device and it 3g

Related

Need some help on restoring rom

Hi Guys
I have the vodafone rom for the BA which ends with *.nb1.
I have tried to get it onto the SD card using xdatools but it always errors out saying not able to read the sector. Is there another way of putting this onto the SD card so i can flash my BA from the SD card in bootloader mode.
Thanks
Lordao

Upgrade Alpine rom via SD card

Hi, I would like to upgrade my rom from SD card. I have the official xda rom pack
Xda_IIi_Upgrade_v111171.exe
and i extracted nk.nbf from that archive
I then inserted an SD card into my reader and tried a
ntrw write nk.nbf f: (which is the card reader letter)
It starts to write and then a few seconds later i get
WriteFile(): nk.nbf -- The parameter is incorrect.
anyone tell me where im going wrong ? thank you
Id also like to know the next step bootloader etc as i havent been able to see a guide for that yet.
many thanks
maltloaf

[Q] Hard-SPL for Rhodium SD Card Method

I need unlock my Touch Pro 2 from SD card. Any ideas?
Not possible.
Im afraid thats not possible, what you need though is OliPros Rhodium Hard-Spl unlocker. Why do you need to do it off Sd Card though?, No usb Cable?

MTTY question

hello
I know what MTTY is and what for
my question is - can I perform MTTY sequence like in Diamond 1 but without micro SD card ??
Just put ROM to internal memory ??
you can erase your current ROM with MTTY and then install any new ROM from you PC by entering boot loader mode. You don't need SD card in this case.

Problem Downgrading HD7 Tmobile US

Hi, i am stuck with this phone on WP7.1, the matter is that i need to change the ROM because T-Mobile ROM does not have this language.
I have read the tutorials how to downgrade the SPL and ROM form asnar and by goldcard method, but none of them are working, i have made everything as the tutorial say here in forum but i can not downgrade this device.
Every time i try by goldcard method after booting into usb host mode(volume down + camera + power) i get the screen loading...
After this the phone goes it a reboot loop and keeps showing usb host mode, then loading... screen and then reboot again
This are the details of my HD7:
OS : 7.10.8107.79
FW : 2250.21.51202.531
Radio : 5.71.09.02a_22.51.50.21U
Bootloader : 5.12.2250.0 (135916)
I have tried to flash with this files :
RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_by_ansar
RUU_Schubert_TMOUS_1.18.531.01_Radio_5.51.09.11a_22.31.50.09_Signed_SCHUBERT_RELEASE
RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_22.45.50.21_Signed_SCHUBERT_RELEASE
RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE
But i keep on the reboot loop
Hope you can help me to solve this matter
Thanks in advance
Br,
Tito Millo
When the device goes to "Loading" and then gets stuck in a boot loop, that means that is started to read the file but then failed.
The most common cause of this are -
1. The SD card reader. Try a different card reader. Make sure that it's not a multi card reader as these seem to have the most problems.
I tried 3 different card readers before my flash/downgrade was successful and have heard of others trying 5 or more different card readers before it worked.
2. If the SD card reader uses a USB cable (like a standard PC printer USB cable) try a different USB cable to connect from the SD card reader to the Y cable.
3. Try switching around the connections on the Y cable between the SD card reader and the phone.
4. Sometimes the camera button will get stuck pushed in when entering USB host mode and prevent the device from flashing.
Try the above and see if it will work for you... I'm pretty sure it's the SD card reader though.
Since it's a T-Mobile device I would also recommend using a T-Mobile Pre-NoDo/NoDo rom to avoid any errors and if you need to return to stock for any reason you have it.
This is a good rom to use, I used it to downgrade my device and the 5.65 radio that is included with it, seems to have better reception and battery life..at least for my device.
RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_2 2.45.50.21_Signed_SCHUBERT_RELEASE
Don't forget to use a 1GB sdcard because 2GB gives some problems with the goldcard method...
I have a TMobile like yours and the goldcard made it possible.
xdrc45 said:
When the device goes to "Loading" and then gets stuck in a boot loop, that means that is started to read the file but then failed.
The most common cause of this are -
1. The SD card reader. Try a different card reader. Make sure that it's not a multi card reader as these seem to have the most problems.
I tried 3 different card readers before my flash/downgrade was successful and have heard of others trying 5 or more different card readers before it worked.
2. If the SD card reader uses a USB cable (like a standard PC printer USB cable) try a different USB cable to connect from the SD card reader to the Y cable.
3. Try switching around the connections on the Y cable between the SD card reader and the phone.
4. Sometimes the camera button will get stuck pushed in when entering USB host mode and prevent the device from flashing.
Try the above and see if it will work for you... I'm pretty sure it's the SD card reader though.
Since it's a T-Mobile device I would also recommend using a T-Mobile Pre-NoDo/NoDo rom to avoid any errors and if you need to return to stock for any reason you have it.
This is a good rom to use, I used it to downgrade my device and the 5.65 radio that is included with it, seems to have better reception and battery life..at least for my device.
RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_2 2.45.50.21_Signed_SCHUBERT_RELEASE
Click to expand...
Click to collapse
Thanks for your kindly help, i was trying with 5 card readers and none worked finally went to a store and got a new one, and a SD 1GB, made the gold card and downloaded the NoDo ROM, and with this SD card and SD card reader i have been able to downgrade the device, now i am happy i can install any rom on my device
Thanks a lot for your kindly help all was about the SD reader and SD card
Br,
Tito Millo
Hell YEAH!!!
tito millo said:
Thanks for your kindly help, i was trying with 5 card readers and none worked finally went to a store and got a new one, and a SD 1GB, made the gold card and downloaded the NoDo ROM, and with this SD card and SD card reader i have been able to downgrade the device, now i am happy i can install any rom on my device
Thanks a lot for your kindly help all was about the SD reader and SD card
Br,
Tito Millo
Click to expand...
Click to collapse
Goldcard + 1GB all the way!!!!
I recommend you Deepshining, I'm sending you the link.

Categories

Resources