I have a problem with zImage, if I put the latest zImage then my Topaz or just reboots or crashes. help, what is it?
LENINred said:
I have a problem with zImage, if I put the latest zImage then my Topaz or just reboots or crashes. help, what is it?
Click to expand...
Click to collapse
It appears you have a rare monodie device, go here and download the latest zImage, and try again.
ReWind402 said:
It appears you have a rare monodie device, go here and download the latest zImage, and try again.
Click to expand...
Click to collapse
Thanks, I'll try. and can you explain to me that means monodie?
LENINred said:
Thanks, I'll try. and can you explain to me that means monodie?
Click to expand...
Click to collapse
I not an expert dev so i can tell you only to what is related. It is related to memory adressing ( memory banks ), it seems that newer TOPA100 on market since march 2010 have a different memory from the older ones ( since the official launching ) and they are adressed to monodie devices and the older ones are dualdie.
Anyway if you wanna know something more you should have a look at that thread.
ReWind402 said:
I not an expert dev so i can tell you only to what is related. It is related to memory adressing ( memory banks ), it seems that newer TOPA100 on market since march 2010 have a different memory from the older ones ( since the official launching ) and they are adressed to monodie devices and the older ones are dualdie.
Anyway if you wanna know something more you should have a look at that thread.
Click to expand...
Click to collapse
Thx for information
I just now tried to run android with the latest zImage for Monodie topaz, and I have it again hangs
LENINred said:
I just now tried to run android with the latest zImage for Monodie topaz, and I have it again hangs
Click to expand...
Click to collapse
Can you tell me what are the last few lines in the kernel panic?
sorry, but where i can see this kernel panic
LENINred said:
sorry, but where i can see this kernel panic
Click to expand...
Click to collapse
When you launch Haret.exe WinMo shuts and a black screen with a lot of white lines of text are loading ( kernel panic ), just write here what are the last few lines before it reboots.
no. my device not shuts he just freez, not reboot.
LENINred said:
no. my device not shuts he just freez, not reboot.
Click to expand...
Click to collapse
Hmm, strange problem. Whats your device, TOPAxxx?
Whats your SD card capacity and did you tried formatting your SD card with this tool ( BUT BE SURE TO BACKUP ALL YOUR FILES )?
my device is topa100
LENINred said:
my device is topa100
Click to expand...
Click to collapse
Aha, did you tried that tool?
And there were some reports that 16gb SD card doesnt work with XDAndroid, do you have the 16gb version? Anyway if you have another SD card with 1,2,8gb try it and report back.
ReWind402 said:
Aha, did you tried that tool?
And there were some reports that 16gb SD card doesnt work with XDAndroid, do you have the 16gb version? Anyway if you have another SD card with 1,2,8gb try it and report back.
Click to expand...
Click to collapse
i don't have a 16gb sd, i use a 2gb version...
and i'm try and try
it's interesting. if i try boot android with zimage for monodie my devise freeze, if with zimage for dualdie he reboot
yessssss android is boot!!! work is fine and sound is work super!!! thx you for help man
maybe a hard reset/other rom
mocroboy said:
maybe a hard reset/other rom
Click to expand...
Click to collapse
no no no... I have done everything... all work(android boot) and sound is working
people, again a problem, android booting only once, when I reboot the device ro WM then again I want to go to the android, he hangs
this can be fixed with the deleting data.img and cilibrator file! and and I do not like this what i can do&&
Related
problem SOLVED
I got no back-up by the way. it sayz
IMEI Unknown
battery 999%
Try installing another rom?
if you try out a few roms and they all dont work, then its properly a hardware error.
I am using this one: http://forum.xda-developers.com/showthread.php?t=1032419
First time i installed Fear rom i had the same problem. I simply reinserted the sim card after some cleaning, rebooted the phone and it was all fine again
XabdullahX said:
Try installing another rom?
if you try out a few roms and they all dont work, then its properly a hardware error.
I am using this one: http://forum.xda-developers.com/showthread.php?t=1032419
Click to expand...
Click to collapse
installing now
IMHO, first thing to do is check your SD Card. Do you see it under CWR ? Can you plug it into another material ? PC, phone, Camera, Nintendo DS, etc... ?
f you can see it somewhere else, then your flash gone bad. Just flash again.
i dont completely understand what you mean, but i can see my SD Card in my pc, other phone, and in CWR.
bbkdhumm said:
IMHO, first thing to do is check your SD Card. Do you see it under CWR ? Can you plug it into another material ? PC, phone, Camera, Nintendo DS, etc... ?
f you can see it somewhere else, then your flash gone bad. Just flash again.
Click to expand...
Click to collapse
SIM, not SD-Card...
i think imma flash this via smartflash
http://forum.xda-developers.com/showthread.php?t=1035041
the original rom
hope it works
unfnknblvbl said:
SIM, not SD-Card...
Click to expand...
Click to collapse
my sim works in my other phones
I was pointing out to bbkdhumm that he got your post mixed up. I'm sorry, but I can't help with your problem, aside from suggesting you flash a different ROM. I've not had any problems with the one from www.romkitchen.org
imma try the stock dutch rom... downloading now. its 633mb so still downloading but i hope it works... ive read it does a complete reset..
Fixed... Me so happy!!
i worship paul (no homo)
u wrote something with wrong imei....
did u check it that it is a correct imei?
yes. the imei is correct.. its working again
its aactually a hard factory reset i think...
i´m happy with you
thankS
Oups !Sorry, I'm a f***ing idiot !
naw... u not...
was running aospcmod4/29 when my phone suddenly craps out... will not boot cant nand it stalls during the restore process stalls during wipe to factory process will flash still but wont load.... wont get past the white screen with htc on it... so im guessing time to ruu.... question is no htc sync so how do i ruu? thanks for anyone who helps ive tried earching but am getting more irritated with the results than am with phone not booting
spleef said:
was running aospcmod4/29 when my phone suddenly craps out... will not boot cant nand it stalls during the restore process stalls during wipe to factory process will flash still but wont load.... wont get past the white screen with htc on it... so im guessing time to ruu.... question is no htc sync so how do i ruu? thanks for anyone who helps ive tried earching but am getting more irritated with the results than am with phone not booting
Click to expand...
Click to collapse
Why no htc sync?
There's a fastboot RUU zip here.
TJinWV said:
Why no htc sync?
There's a fastboot RUU zip here.
Click to expand...
Click to collapse
maybe im wrong but thought you had to be running a stock or sense base rom for htc sync to recognize the phone being that my phone wont load or restore i cant flash or nand back to a sense base or even stock
starting to think maybe my sd card fried cant get it to transfer files from my pc or to my pc it stalls out trying to format it but thats not working well either keep gettin windows cannot complete the format error or a sd card is locked message.... in other words having hell thinking about smashing it and filing on insurance.......
spleef said:
maybe im wrong but thought you had to be running a stock or sense base rom for htc sync to recognize the phone being that my phone wont load or restore i cant flash or nand back to a sense base or even stock
starting to think maybe my sd card fried cant get it to transfer files from my pc or to my pc it stalls out trying to format it but thats not working well either keep gettin windows cannot complete the format error or a sd card is locked message.... in other words having hell thinking about smashing it and filing on insurance.......
Click to expand...
Click to collapse
Did you see my help LINKS thread lol
http://forum.xda-developers.com/showthread.php?t=1063843
AFAIK you need the sync, cuz it gives you drivers, but there's many ways, go click around in my thread and after you get the basics done post back in here. It does sound like your sd card is borked though, if windows won't even format it. Are you s-off? Probably not Can you get to ADB? does it recognize your phone?
WAIT.... you can use recovery? Just grab another sd card and flash from scratch, no RUU, no nand restore, scratch, it should work.
If your s-off try reflash your recovery. If your not s-off then you should be. Then try to reflash your recovery.
#Root/Hack-Mod_Always*
ive ruued from cm6 before try going to your recovery and mount usb and do it that way
well got my new phone in and am rooted and running cmod and DH again now need to find a way to repair/format/erase the SD card I was using before cause 2gb card just isn't going to cut it.. lol yeah I searched the threads but nothing worked. said screw it and ordered new phone through insurance.thank you guys so much for the responses yall the greatest. wouldn't know of a way to fix my sdcard would ya is a sandisk 8gb class 2 am running windows7 64bit have tried the program sdformatter doesn't work ends up not responding tried the built in format option a no go even tried through the new phone which stats to check it for errors once I insert it but then shuts the phone down by itself after a few moments. again any help so greatly appreciated thanks
Sent from my HERO200 using XDA Premium App
spleef said:
well got my new phone in and am rooted and running cmod and DH again now need to find a way to repair/format/erase the SD card I was using before cause 2gb card just isn't going to cut it.. lol yeah I searched the threads but nothing worked. said screw it and ordered new phone through insurance.thank you guys so much for the responses yall the greatest. wouldn't know of a way to fix my sdcard would ya is a sandisk 8gb class 2 am running windows7 64bit have tried the program sdformatter doesn't work ends up not responding tried the built in format option a no go even tried through the new phone which stats to check it for errors once I insert it but then shuts the phone down by itself after a few moments. again any help so greatly appreciated thanks
Sent from my HERO200 using XDA Premium App
Click to expand...
Click to collapse
Well, I'm no sdcard expert, but I remember jasonmaloney posting some sort of sdcard help/fix ideas recently. Maybe try to read thru some of his posts or send him a PM? Or give in and get a new sd
il Duce said:
Well, I'm no sdcard expert, but I remember jasonmaloney posting some sort of sdcard help/fix ideas recently. Maybe try to read thru some of his posts or send him a PM? Or give in and get a new sd
Click to expand...
Click to collapse
<.<
>.>
Don't think it was me.
looking at newegg now are these sdhc cards compatible witht he hero looking at getting a 8gb class 6 but cant find one thats not sdhc
jasonmaloney said:
<.<
>.>
Don't think it was me.
Click to expand...
Click to collapse
Yeah after I posted that I remembered you were actually talking about recovering lost data on an sd, oops.
Just wanted to elaborate a little on this in case anybody searches for help and lands here.
The 'LINKS' thread Duce provided contains a link to an RUU (windows executable) which only requires the Android USB Driver is installed.
http://forum.xda-developers.com/showthread.php?t=800586
You can download an Android USB Driver package separately.
You can also find the HTC Android USB Driver here (bottom of page).
I have used this many times, even on computers without AndroidSDK installed, just the driver package (I keep a zip on my SDCard ~8 MB).
wouldn't know of a way to fix my sdcard would ya
Click to expand...
Click to collapse
You might try and boot into a Linux Rescue Disk (i.e. RIPLinuX - (Bootable ISO X-Version))
Search right-click menu for GParted.
Run GParted, delete the partition(s), rebuild partition table, format new partition(s).
All this is done right in the GParted UI, just a few clicks.
This might help fix your problem, not really sure.
ive alway used my old mt3gs 4gig sd card.
Hi guys. Fist of all, sorry for my bad english.
I bricked my phone's touchscreen, with update firmware in the *#*#2663#*#* and its wrote 'update failed' . My bad, dont do this. Dou you know any solutions? I tried factory reset, flashing roms ( froyo and gongerbread too), but nothing helped. The touchscreen stopped responding. But i think, if i can reflash the touchscreen firmware, it will working. It is possible flash the touchscreen firmware from sd card? Actually where are the files of the driver in the file system?
Can we explain, what happened actually when click on update on the tsp firmware screen? Which application/ script started? I thinks, the touchscreen files are in the tsp ic, which is separated from the flash, so just flashin a new rom dont write data to the tsp ic. But the files must be in the rom too, because some people did the update without problem, and the firmware version is changed, and the touchscreen works better then before. Do you have some ideas? If you have root acces, please browse the system folder, i thinks there is somewhere a "tspupdate" or similar named shell script/application what i need. But dont run it, it can brick your touchscreen too!!!
Sorry for my bad englis.....
problem solved
salmaj said:
problem solved
Click to expand...
Click to collapse
How did you solve it?
Yeah! How did you solve it? I currently have the same problem on my Bell's Vibrant. I also tried reflashing my Gingerbreak and factory reset without any success.
You don't know what you got til it's gone! Back button is really useful!
tasp update
salmaj said:
problem solved
Click to expand...
Click to collapse
Hi buddy, i m facing the same problem, plaease share your solution, as i am stuck and my touchscreen becomes unresponsive after wake up. Really tired of reading the forums. Thanxs a ton budddy
galaxy tab p1000 india
please
salmaj said:
problem solved
Click to expand...
Click to collapse
Please, How did you solve it?
How?????????????????????
salmaj said:
problem solved
Click to expand...
Click to collapse
Please tell me how did you do it
guess op bricked or lied or...
is just being a greedy attention whore?
THIS MAY MAKE THINGS WORSE, BUT SOME DO NOT CARE. DRAGONS AHEAD....
Either way hoarding knowledge is a big peev of mine. I have read about this issue from as many google'able places as possible. I started reading after I went thru the release notes from some of the sX series. I notices that some carriers listed ghost/glove tsp firmware update/support. I also noted as the original poster did, that the files are in the rom. I would guess look thru all the updates your carrier made available and download the specific whole rom update and factory restore / apply it. Should this not work look thru the system folder for the file. When you have it copy it to your sd card where the tsp update screen tells you to put it. Try running the update again.
If this works please confirm this.
I think possible looking in system folder I recall a firmware folder possibly inside lib or modules somewhere.
I read that tsp modes are controlled from, so logically the files should be nearby.
/sys/class/sec/tsp
or depending on phone/model
/proc/touchpanel
I will keep an eye here, I am busy with some debricking and roms in general.
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
TheMadxtremist said:
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
Click to expand...
Click to collapse
Which kernel did you use? To be honest, go back to Windows if following simple guide is too difficult. And camera quality won't be any better in Android.
The only reasonable kernel for NAND is the kernel with separate cache partition. On each other appear errors sooner or later. Install this kernel, reinstall the system and apply the update.
And do not start constantly new threads to the questions on which someone already replied before. Read and search forum!!
You people dont get it .
My kaiser is and android F-O-R-E-V-E-R.
Because i flashed it using kaisercustomruu.
and the power button+camera+reset button dont work for me.
i think there's a prob with camera button that's why.
so , now , how do i flash the kernel ?
Please help !!
i cant get into bootloader .
is it the camera button then ?
tell me ?
No, you don't get it man! Stop beeing a noob and learn to follow simple guides! You need to copy KAISIMG and KAIDSIAG (make sure to unpack ) to your memory card. After that you can flash with "Power + Camera + Reset". Is this so hard to Google and find what you need? Also, to make sure you won't make any more mistakes, check if you have HardSPL installed and apply all updates from kernel you used. I recommend you this kernel.
http://forum.xda-developers.com/showthread.php?t=1152219
Man, I just hate those guys who are noobs and consider themselves to be experienced users .
Mr. Noob Hater , were'nt u a noob ?
and i told u i have tried that and it doesnt work................
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
TheMadxtremist said:
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
Click to expand...
Click to collapse
Do you have HardSPL? And remember to keep Camera button fully pressed, not just in half.
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
TheMadxtremist said:
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
Click to expand...
Click to collapse
What do you mean it doesn't accept your SIM card? Some screenshots? Anyway, if Camera button doesn't work for you, then you're stuck with this kernel forever . Which one did you flash? I'll give you proper update for it.
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
TheMadxtremist said:
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
Click to expand...
Click to collapse
I asked you about kernel! Whcich KERNEL did you flash?
I dont remember correctly , but i think i flashed kernel with separate cache partition and modified cpu and gpu with atools.....
Now , i only need an update .............
i figured out and rectified the problem as well......
Was pretty hard......
AND THANK YOU MR> NOOB HATER
waiting for wifi update.....
go to settings/about phone and check kernel version. If show something like 2.6.32.9 N50Vc #39 Kernel you can find androidupdate.tar packed with kernel in Cache Kernel & ATools.zip. http://forum.xda-developers.com/showthread.php?t=1152219.
Can you share what was wrong with the sim? (for future"generations" with the same problem)
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
No. Rather, it will not work. You do not have a scoot's kernel... Maybe someone else remember your kernel signature and give you update.
TheMadxtremist said:
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
Click to expand...
Click to collapse
Man, you just proved that you're a huge noob. You flashed a kernel with RUU and you don't even remember which one was that. LOL . Looks like you're out of WiFi forever now . I've never seen such kernel anywhere...
TheMadxtremist, If I were you I'd tried to find the reason why camera button not working. You wrote that you dropped phone, so probably this is some hardware failure(flex tape, switch, something else). If you have any experience try to disassemble phone and fix this or find someone who can do it for you. Because even if someone will give you update your phone will be unstable with this kernel.
Hello,
One week ago, I was using my phone as usual when suddenly froze and I pulled the battery, then I was stuck in boot loop so I decided to go into download mode and reflash it, but I accidentally flashed H811N instead of H811H , now my phone is hard bricked !! " No charging / No download mode / Nothing at all " , is there any way to fix it ?
Thanks
There's a fix a couple posts down. Have you tried that yet?
mjoecarroll said:
There's a fix a couple posts down. Have you tried that yet?
Click to expand...
Click to collapse
Yes I tried but I got some errors ! I don't know why, I think it might be because of I did not find a stock dump (img) of H81110H ?
What errors did you get? Which build did you use?
Also, try this. It doesn't look like he has the system.img available, but you could always try to pull it out of the kdz. There's some directions online.
mjoecarroll said:
What errors did you get? Which build did you use?
Also, try this. It doesn't look like he has the system.img available, but you could always try to pull it out of the kdz. There's some directions online.
Click to expand...
Click to collapse
Thanks a lot for your answer, what it really happened that I manged to make it boot to bootloader for the first time, then I tried to flash the KDZ file, but it stuck on 9% giving me an error, then I tried to go to download mode again but now it gives me blank screen !! ..
mo5br said:
Thanks a lot for your answer, what it really happened that I manged to make it boot to bootloader for the first time, then I tried to flash the KDZ file, but it stuck on 9% giving me an error, then I tried to go to download mode again but now it gives me blank screen !! ..
Click to expand...
Click to collapse
Were you able to try the files I gave you there?
And do you know which error it gave you? You might want to try to fastboot a recovery (put a recovery in the same folder as your adb and fastboot, name it recovery.img, run command "fastboot boot recovery.img", then installing a rom from the recovery), although I haven't tried his method yet so I am not sure if that is even possible.
mjoecarroll said:
Were you able to try the files I gave you there?
And do you know which error it gave you? You might want to try to fastboot a recovery (put a recovery in the same folder as your adb and fastboot, name it recovery.img, run command "fastboot boot recovery.img", then installing a rom from the recovery), although I haven't tried his method yet so I am not sure if that is even possible.
Click to expand...
Click to collapse
I actually the error was about flashing a different version then I tried for another time gave an error of different size of firmware.
When I try to connect the phone to my computer, it appeares as "qhsusb_bulk" and doesn't recognize the phone.
Now I can't turn it on or charge it, or even getting to download mode ! ??
Try using the Google Android adb drivers. Keep trying different USB ports until it works.
mjoecarroll said:
Try using the Google Android adb drivers. Keep trying different USB ports until it works.
Click to expand...
Click to collapse
I tried but still not recognizable, I tried all ports in my computer but still not working .. any other ideas ?
mo5br said:
I tried but still not recognizable, I tried all ports in my computer but still not working .. any other ideas ?
Click to expand...
Click to collapse
Something similar happened on my G2 at one point, so everything I'm saying is going off that.
Firstly, what was the situation of your phone prior to this? Was it rooted? Did it tend to overheat? What are the first three numbers on your serial number?
mjoecarroll said:
Something similar happened on my G2 at one point, so everything I'm saying is going off that.
Firstly, what was the situation of your phone prior to this? Was it rooted? Did it tend to overheat? What are the first three numbers on your serial number?
Click to expand...
Click to collapse
Well I did a really strange thing, in which I put my phone in the freezer, and I got into the download mode again. When I start to flash the KDZ file, I got an error " Erro Code = 0x2000, TOT antirollback version is smaller than device version. " , any ideas how can I solve it ?
mo5br said:
Well I did a really strange thing, in which I put my phone in the freezer, and I got into the download mode again. When I start to flash the KDZ file, I got an error " Erro Code = 0x2000, TOT antirollback version is smaller than device version. " , any ideas how can I solve it ?
Click to expand...
Click to collapse
That usually means you were on marshmallow and tried to downgrade to lollipop. You sure you had lollipop?
mjoecarroll said:
That usually means you were on marshmallow and tried to downgrade to lollipop. You sure you had lollipop?
Click to expand...
Click to collapse
I am actually not sure which version I had !! any ideas ?
Did your notifications show up on your lockscreen?
mjoecarroll said:
Did your notifications show up on your lockscreen?
Click to expand...
Click to collapse
I think I was on Lollipop (5.0) , since i did a quick research and I found out that ..
mo5br said:
I think I was on Lollipop (5.0) , since i did a quick research and I found out that ..
Click to expand...
Click to collapse
What build versions did you use to try to fix your phone?
mjoecarroll said:
What build versions did you use to try to fix your phone?
Click to expand...
Click to collapse
Unfortunately, I don't know I am so sorry...
mo5br said:
Unfortunately, I don't know I am so sorry...
Click to expand...
Click to collapse
At this point, I'd recommend trying the method with every version on opensource.lge.com newer than the version you tried that gave you the previous error.
mjoecarroll said:
At this point, I'd recommend trying the method with every version on opensource.lge.com newer than the version you tried that gave you the previous error.
Click to expand...
Click to collapse
I'll try and let you know what would happen, thanks a lot
mjoecarroll said:
At this point, I'd recommend trying the method with every version on opensource.lge.com newer than the version you tried that gave you the previous error.
Click to expand...
Click to collapse
Unfortunately, nothing worked with me ? what's the next step now ? :crying: