I am getting annoyed with the speed of my Sprint Hero. the lag on the dialer is really annoying me, I hit dial and wait 5-10 seconds before the phone actually dials then it does the stupid vibrate after the call is ringing already.
Sometimes I think i did not hit the call button so i hit it again, and nothing happens for a while then suddenly I get 2 calls going at the same time to the same person.
I am rooted and running a 2.1ROM but I forgot which one, but it doesnt have any special features besides the super user app and htc sense.
Im willing to settle for something with out sense as long as it speeds up the phone.
I am even considering if its possible to unroot and to whatever 2.1 version sprint has out now and hope it fixes things.
Please let me know which ROM I should try, I dont care about sense, live wallpapers, special animations, just make the phone quicker.
cyanogen 2.2 mod is the best...overclock it to 768
Well, I assure you that using stock 2.1 will *not* fix your problems, especially lag issues. Better to stick to modded ROMs, to be honest.
After trying a few ROMs, I came to love ZenEXP. And with the 0.9.7 release that just came out, it seems like things have gotten even faster. You're rooted, so... do a nand backup, and give it a shot. Try Cyanogen too, as the last person said.
andrewt328 said:
cyanogen 2.2 mod is the best...overclock it to 768
Click to expand...
Click to collapse
Which overclock app you using?
Bkz_flyest said:
Which overclock app you using?
Click to expand...
Click to collapse
Please note that not every Hero will tolerate 768 on the processor. Really, seems only a select few can run it without stability issues. Mine will freeze instantly if set any higher than 710. This is why the new CM6 is clocked at 691, so everyone can boot it, and so it is rock solid. If you can get 768, then you are one of the lucky ones!
andrewt328 said:
cyanogen 2.2 mod is the best...overclock it to 768
Click to expand...
Click to collapse
How do you get it to 768? I'm using setCPU and it peaks at 528
My max is 678.. but I put it at 652. Should I just max it out at 678?
Never mind its 691.. I maxed it.. I wont have a problem with battery overheating right?
AjaxBU said:
How do you get it to 768? I'm using setCPU and it peaks at 528
Click to expand...
Click to collapse
The app that you use to manage your OC speed doesn't determine how fast your processor will actually run, it's all based on the kernel embedded (or flashed) onto your phone. If you're running stock 2.1 then SetCPU will only show your max speed as 528mhz because that's how fast the stock kernel is. Other ROMs like DarchDroid and CM6 have kernels that boost the max speed to over 700mhz. If you install one of those then you'll see massive speed improvements to your phone and with SetCPU you can either leave the kernel to allow for maximum speed or you can throttle it down if your phone becomes unstable and can't handle it.
jordanjackthomas said:
The app that you use to manage your OC speed doesn't determine how fast your processor will actually run, it's all based on the kernel embedded (or flashed) onto your phone. If you're running stock 2.1 then SetCPU will only show your max speed as 528mhz because that's how fast the stock kernel is. Other ROMs like DarchDroid and CM6 have kernels that boost the max speed to over 700mhz. If you install one of those then you'll see massive speed improvements to your phone and with SetCPU you can either leave the kernel to allow for maximum speed or you can throttle it down if your phone becomes unstable and can't handle it.
Click to expand...
Click to collapse
Wow, thanks for the tip. I'm running the stock 2.1 atm because I haven't found a rom that combines both live wallpapers and multitouch yet. I play games on my phone often, probably too often, and I have to be able to use two fingers. The live wallpaper thing is just because I think it looks really cool, especially that mario one.
benchmarking
what are good scores
I'm getting 5.4 Linpack, 464 quadrant! Oc'ed to 768.0MHz
Sent from my HERO200 using XDA App
ZenEXP 10(chars)
If you're looking for pure speed I recommend pancake 0.1,very fast 1.6 rom, if you're looking for something sorta fast and up to date, use cm6
tomatosoup said:
If you're looking for pure speed I recommend pancake 0.1,very fast 1.6 rom, if you're looking for something sorta fast and up to date, use cm6
Click to expand...
Click to collapse
CM6 is the best... fast and packed with features, and it's froyo! Use CM6 with the uncapped kernel
Can anyone show me where to find this CM6? Newbie...sorry
dvargas72 said:
Can anyone show me where to find this CM6? Newbie...sorry
Click to expand...
Click to collapse
Back out to the hero forum -> android development -> cm6 testing or cm6 rc1
Sent from my HTC Hero using the XDA App
Which Cm6 is better? Are there any differences?
All of the cm6's are fast, just have to figure the right configuration for your own phone!
Sent from my HERO200 using XDA App
I increased the vm heap on cm6 to 32m and it eliminated any and all lag for me. It runs like a scalded dog.
Sent from my CDMA Hero. I got some hot froyo on hero action here!
Related
Hi,
I'm having my Nexus One for about two weeks now and I already started a thread about the choppy scrolling between homescreens but now I want to know if there are other people that find their Nexus One slow and if they were able to make it faster in any way.
When I bought this phone I thought android would 'fly' on it cause I already had a HTC Magic and that went reasonably fast. But everything I'm using on my Nexus One feels choppy and not fluent as I expected/want it to be. For example when you start the browser or any other program you get this zoom animation which is nice but it doesn't go fluent, it goes choppy like you would play a videogame with 5 FPS.
And as I already mentioned the same counts for the launcher, it's just not fluent and doesn't feel fast at all.
I've tested different rom's, froyo, etc. but nothing seems to make it right so now I'm wondering if there are people that have the same issue's? Is it normal that the Nexus One isn't super fast to use or is there something wrong with my phone and should I return it?
i think something is wrong. especially with froyo the phone is ultra-fast.
Try Linpack and some other benchmarks and post the results.
Or try osmonitor for example and see what the cpu speed does, perhaps it is stuck @ 245 mhz for some reason lol
Ok, my score in Linpack is 6844 (MFLOPS). Don't know if that's good or bad. In BencmarkPi my Nexus One calculates Pi in 2842 miliseconds. And in Neocore I get 26.4 FPS which seems pretty normal to me.
I don't think my problems are hardware related, it more feels like it's the software.
Ow and I ran OSmonitor now and there's something strange. It says Memory Total: 217.440K Free: 67.500K
Is this a known bug or should it say 512MB?
renegadEEE said:
Ok, my score in Linpack is 6844 (MFLOPS). Don't know if that's good or bad. In BencmarkPi my Nexus One calculates Pi in 2842 miliseconds. And in Neocore I get 26.4 FPS which seems pretty normal to me.
I don't think my problems are hardware related, it more feels like it's the software.
Ow and I ran OSmonitor now and there's something strange. It says Memory Total: 217.440K Free: 67.500K
Is this a known bug or should it say 512MB?
Click to expand...
Click to collapse
your using eclair without a highmem kernel, thats why it only shows that much RAM. What roms have you tried? Try cyanogens or even stock froyo and see how the speed improves. I think you may be feeling its slow because of the extra animations that werent present during 1.6 which is what the MT3G is on
flybyme said:
your using eclair without a highmem kernel, thats why it only shows that much RAM. What roms have you tried? Try cyanogens or even stock froyo and see how the speed improves. I think you may be feeling its slow because of the extra animations that werent present during 1.6 which is what the MT3G is on
Click to expand...
Click to collapse
But the kernel thing doesn't affect the speed? I believe stock Froyo is one of the best I've tried so far. I tried cyanogen too, 5.0.7 I believe, but the launcher was extremely slow on that one.
Or am I flashing my roms the wrong way so things don't run smooth? I just download the .zip files, put them on my sd card, boot into recovery, whipe and flash. Normally it should work that way I believe.
And on my HTC Magic I was using a rom with Sense UI that worked very smooth. Maybe I should try the Desire ports but I like the stock Nexus One UI better.
Also I can't understand why there are developers OC'en the Nexus One? If it's really that fast already why would you risk that you're phone dies quicker for that extra performance?
And I don't hate animations, I even like them, but not if they are choppy.
renegadEEE said:
But the kernel thing doesn't affect the speed? I believe stock Froyo is one of the best I've tried so far. I tried cyanogen too, 5.0.7 I believe, but the launcher was extremely slow on that one.
Or am I flashing my roms the wrong way so things don't run smooth? I just download the .zip files, put them on my sd card, boot into recovery, whipe and flash. Normally it should work that way I believe.
And on my HTC Magic I was using a rom with Sense UI that worked very smooth. Maybe I should try the Desire ports but I like the stock Nexus One UI better.
Also I can't understand why there are developers OC'en the Nexus One? If it's really that fast already why would you risk that you're phone dies quicker for that extra performance?
And I don't hate animations, I even like them, but not if they are choppy.
Click to expand...
Click to collapse
the kernel is actually the primary factor when it comes to speed. how the kernel manages actions on the phone is the deciding factor on what makes it run fast. you can have a very fast phone hardwarewise, but if the kernel is designed poorly, the phone will run slow as well. Using a kernel that does not have highmem enabled means your probably running an older kernel that does not have updates for speed. the latest froyo kernel has highmem and JIT enabled for faster application use as well as over smoother feel.
i love the animations as well
im coming from the G1 and i havent had any of the of the problems you seem to be having. you are flashing the roms correctly (unless there are additional things such as google apps you need, idk whats the procedure on that for the nexus) Im running fully stock with froyo FRF72.
I would imagine that Desire would be SLOWER than stock android not faster. However the animations may be better optimized. I only used sense on the G1 and it was slow as heck on there (i would have used it all the time otherwise) The main reason that things look so choppy is because rendering is not handled by the GPU, rather the CPU. This puts more strain on the CPU than should be necessary.
I don't get why they OC the CPU either. Seriously, 1gHz is fast for a PHONE. I can understand why when the phone starts getting dated why you would....but its not gonna be dated till at least Q4 2010 when the 1.2-2gHz snapdragons are coming out.
Qualcomm will have a 1.5gHz ready for new phones this year. DUAL-CORE
http://gizmodo.com/5443976/qualcomm...dragon-smartphones-are-about-to-go-hyperspeed
As for the problem. Sounds weird. Try LauncherPro for a test. That is smooth launcher that flows like butter. If that is choppy then there is something seriously fu-bar going on with yer phone
I've flashed the stock froyo FRF50 now and till now it looks a lot better. OS manager now shows a total of 400MB memory. Is this the normal amount it should show? Or should I be looking for another kernel for froyo? And what is the difference between froyo FRF50 and FRF72?
-------------------------------------
Sent via the XDA Tapatalk App
so is your nexus smooth and fluid now? because mine is very smooth swiping the homescreens. using launcher pro. no choppiness at all.
Stock launchers to me are kinda choppy too. And that was my only complain with the nexus. Like the previous posters advised, try launcher pro and adwlauncher, tweak the settings to your liking and you'll see the difference. As far as kernel for froyo try pershoots kernel, it seems to be very smooth and speedy.
renegadEEE said:
I've flashed the stock froyo FRF50 now and till now it looks a lot better. OS manager now shows a total of 400MB memory. Is this the normal amount it should show? Or should I be looking for another kernel for froyo? And what is the difference between froyo FRF50 and FRF72?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Ok, thanks for al the replies and great advice! With the fresh Froyo rom and a better kernel everything goes way better now!
-------------------------------------
Sent via the XDA Tapatalk App
renegadEEE said:
Ok, thanks for al the replies and great advice! With the fresh Froyo rom and a better kernel everything goes way better now!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
400 is normal. FRF72 seems to help battery life greatly for me. browser seems more stable and google apps have been updated (alarm and calendar)
renegadEEE said:
Ok, thanks for al the replies and great advice! With the fresh Froyo rom and a better kernel everything goes way better now!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Minor suggestion - install ADW.Launcher (you'll have to tweak the settings a bit to make it nice) or Launcher Pro (works great as is) with your Froyo ROM. You'll thank me for it. The stock launcher scrolling is choppy - always has been, never was really fixed in Froyo (at least as of FRF50 - I haven't even bothered trying it with FRF72).
I am using Setcpu on my motorola droid with rooted FRG22. Why wont it let me overclock it higher than 800mhz??? I'm kinda new to doing this and wondering if I'm doing anything wrong. Thank you
[A] Overclock answer
Yes you have SetCPU and your phone is rooted. However, you're missing one more piece to the puzzle. In order for you to clock over 800Hz you have to install a kernal cooresponding to the voltage and what you want to overclock it to. I recommend you googling(haha) p3designs and choose a kernal you want to try. Instructions are on the site as to how to install. I currently have a low voltage of 125Mhz overclocked at 1Ghz. Hope that helps
Question for you Stephen, with you running 1.2Ghz on your droid, has there been any istances of freezing thus far? I was tempted to go higher, though I stuck with 1Ghz to be safe.
M4r34d0 said:
Question for you Stephen, with you running 1.2Ghz on your droid, has there been any istances of freezing thus far? I was tempted to go higher, though I stuck with 1Ghz to be safe.
Click to expand...
Click to collapse
The right approach to overclocking is not how fast can you go, but how low can you tolerate? Most Droids are stable to 1.2 ghz. Some can go higher, some can't. I'm running the "stock" 1ghz kernel that comes with Sapphire rom. However, I have it choked back to 800mhz. This gives me 36 hours of battery life on light-moderate use, (3G off, wifi on) but also lag-free performance.
This is chevys 1.25 medium voltage, only reboots were with watching movies online.
Sent from my DROIDX using XDA App
That was droid 1, lol barely get 1300 with my droid x
Sent from my DROIDX using XDA App
The links for the kernals over at p3designs don't seem to be working for me. Does anyone have some overclocking kernels they could post?
Barkleyfan said:
The right approach to overclocking is not how fast can you go, but how low can you tolerate? Most Droids are stable to 1.2 ghz. Some can go higher, some can't. I'm running the "stock" 1ghz kernel that comes with Sapphire rom. However, I have it choked back to 800mhz. This gives me 36 hours of battery life on light-moderate use, (3G off, wifi on) but also lag-free performance.
Click to expand...
Click to collapse
I understand what you mean. I've done the trial between 800Mhz and 1Ghz. I have emulators now and I liked the performance on the 1Ghz more because of the speed, so I kept it on 1Ghz. I haven't had any battery drainage issue and all. I liked my low voltage 1Ghz kernal.
kclive said:
The links for the kernals over at p3designs don't seem to be working for me. Does anyone have some overclocking kernels they could post?
Click to expand...
Click to collapse
http://p3designs.info/kernels/
Is this the site you tried accessing the kernals? I did a test and downloaded the kernal zip fine.
That does sound impressive. I'm curious to try that out even more so now.
So I have a random question here. I've got a buddy that has his original G1 overclocked at 1.2Ghz. I was pretty impressed by it and figured if the G1 could achieve that, then the Hero has to have at least a kernel up to 1 Ghz. Any thoughts on this? I really don't care about overheating the phone, I'm just tired of the lag. Right now I'm clocked at 728 Mhz.
Sent from my HERO200 using XDA App
You must do more than overclock to improve responsiveness.
I can run a stock, rooted and just by deleting many, many items, the phone is very fast(responsive).
Typically, the Hero will dislike clock speeds over 710. Some can run stable at 768 but not many.
Well, honestly. I really don't care what my Hero likes. Lol. I once had a Palm Pre running at 1.2 Ghz and it was blazing fast. I don't really think that storage space really makes a huge difference, it more or less depends on your clock speed.
Sent from my HERO200 using XDA App
Good luck, man. If you just want to ramp up the speeds, try the standard voltage kernel. Found here:
http://forum.xda-developers.com/showthread.php?t=705074
I would say use the v4 version as it runs the stock(I believe)voltage. There also may be others that other users will suggest; Im not a pro by any means.
So im running cyanogenmod 6 on my tmobile G1 i was wondering whats a safe overclock for max and min
also i was wondering what do u think the coolest widgets and stuff are
I run mine at 576... smooth...and no issues yet
Sent from my HTC Dream using XDA App
576 is what Cyanogen includes in CM6 as the max stable overclock. From all the testing I have done with SetCPU's built in stress test, 576 is the max stable overclock for my phone. Anything higher and I will see random reboots or hard freezes.
jamal717 said:
So im running cyanogenmod 6 on my tmobile G1 i was wondering whats a safe overclock for max and min
also i was wondering what do u think the coolest widgets and stuff are
Click to expand...
Click to collapse
Agree with everyone else....576mhz is the max I would ever go. As far as "cool" widgets/stuff, I would say:
1. Mobile buzz
2. Tech buzz
3. Cubed music player
4. Black Facebook
5. TuneIn Radio
6. SNES Emulator
That's just a few I like and enjoy, but to each their own
Sent from my HTC Dream SparksMod using XDA App
i have also had this problem. I just went down to 576/122 on setpu
614 oc is stable, mT 1.2. Pretty much same phone
thanks people
Which of the current 2.3 ROMs is considered the fastest/most responsive? Or which ROM would be considered the fastest based on the mods & tweaks used by the developers? I'm not to versed in the technical side of things to discern which tweaks/mods/kernels/etc give way to the most stability, speed, and response and would like the community's opinions on the matter.
Probably CM7, I just started using it and there is never any lag. I haven't even OC'd it yet. This also comes with the price of having to live off a wall charger though.
Sent from my SGH-I897 using XDA App
If you mean fastest in clock speeds, then thats a balance betwen rawr clock and how much battery life you can get out of it. Keep in mind these phones clock easily 1.2ghz-1.3ghz no issues past that you need to increase the voltage. So you can in theory get 1.6ghz-1.8ghz but you will live next to a charger. If you mean fastest on how it feels Id have to say Continuum moved awesome few months back (haven't used it in a while) Atomic Fusion if the ext4 version comes out. But there you should just test them out.
On a side not if you want to OC your phone and not have to pay for the oc app, then Id suggest you stick to I9000 ports or AOSP's like CM7 or MIUI. Native roms like Cognition 5, Atomic Fusion and Nuclear Fusion need Tegrak for OC/UV.
Which of the I9000s seem to run the fastest/smoothest? I've been looking at Dlev and Darky but how does Apex/Symply GS II/Mosaic/Sensation compare?
prbassplayer said:
Keep in mind these phones clock easily 1.2ghz-1.3ghz no issues past that you need to increase the voltage. So you can in theory get 1.6ghz-1.8ghz but you will live next to a charger.
Click to expand...
Click to collapse
I actually read in the Glitch kernel thread that when overclocking, higher voltages doesn't always mean more stability. I'm OC'd at 1.5ghz right now really stable and I was UV'd at -50mv but I just dropped it to -75mv to see if its stable there. I'll keep dropping it till I have issues.
Oh yeah, and CM7's battery life has got WAY better over time, so I'm not having to worry about charging all the time either.
Sent from my Samsung Galaxy S Captivate
Reamer09 said:
I actually read in the Glitch kernel thread that when overclocking, higher voltages doesn't always mean more stability. I'm OC'd at 1.5ghz right now really stable and I was UV'd at -50mv but I just dropped it to -75mv to see if its stable there. I'll keep dropping it till I have issues.
Oh yeah, and CM7's battery life has got WAY better over time, so I'm not having to worry about charging all the time either.
Sent from my Samsung Galaxy S Captivate
Click to expand...
Click to collapse
From my experience to maintain a stable phone i over volt the "step" that's overclocked, and then undervolt the other "steps". Im by no means a expert nor is there a full proof way to do it. Each phone kinda reacts differently on the overclocking past 1.2-1.3ghz.
Which of the I9000 roms should theoretically run faster due to the tweaks/mods used by the developers without the need to overclock?
There if no need to overclock for daily use. Only if you are playing very demanding games. And only during those games.
As for fastest rom....have a search this question gets asked a lot with always the same answer and result:
There is no best rom, all phones are different as well as tastes, what's best for me on my device may not be on yours. Flash and try a few and make you own decision...
CM7 is fastest but Display and Sound quality is not as good as stock ROM .
Before school started for me and i couldnt access a charger when i wanted to, i used MIUI at a stable 1.6 GHz ALL of the time with odemand govenor and i got like 18 hours with moderate use, on Glitch V12! And you dont need to overvolt for higher speeds i have tested it and its better to undervolt higher clocks, i get better battery and performance!
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!
For the 10th time Each phone reacts differently to Overclocking. There is no sure way to get it OC/Uv. On my phone past 1.2ghz i need to over volt.
prbassplayer said:
For the 10th time Each phone reacts differently to Overclocking. There is no sure way to get it OC/Uv. On my phone past 1.2ghz i need to over volt.
Click to expand...
Click to collapse
Well i ran 1.6 GHz undervolted at ever clock speed fine, had better performance than over volting, so its different
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!