Database Develop

Is there any way to know IMEI code?

Hello,
Few days ago i bought HTC At&t Tilt/8925 in USA. Now i'm at home in europe and need to unLock it.
Also find in Ebay lots, where people who have access to some databases sell "UNLOCK Code For *At&t/Cingular* Tilt/8925", but they need IMEI code of phone at first.
So my question is how to find IMEI phone on locked phone?
As i know i must type "*#06#", but how can i do it, if the only sreen that i can view is
Network is locked, please input unlock code.
To make an emergency call, type the emeregency number and tap emergency
And field under that, where i must type unlock code?
Click to expand...
Click to collapse
So where i must type "*#06#"? in the that field and click ok? I'm afraid, that phone can understand that it's unlock code (and as i know i cann't type more than 5 wrong codes )
Any advice will be appreciated

remove the battery and it should be listed on the phone.

Or type *#06# in your phone dailer .

denco7 said:
Or type *#06# in your phone dailer .
Click to expand...
Click to collapse
i cann't type, as there is one field just for UNLOCK CODE.
Typing in this field will be understand, as UNLOCK CODE
remove the battery and it should be listed on the phone.
Click to expand...
Click to collapse
really
thx
there are 3 codes:
P/n
IMEI
S/N
Waw .. thanks ... so it's the right IMEI code?
Btw, need you advice , does unclocking phone with just codes (as on ebay) work really?
A check this guys have nice rating, but as you know sometimes, just ratings don't mean anything.
Once again, thank you ChumleyEX !

Normally you are able to get a code from at&t to unlock it so I would pay for anything. Also I think you can use a method from this site to unlock.
I'm not sure if you're able to call at&t, but if you can, just call them and tell them you are traveling over seas and you need to unlock it.

http://forum.xda-developers.com/showthread.php?t=361039
;-)

Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0

REMOVE YOUR SIM CARD!
That will stop the "Network Lock" Message from displaying.
Then you can get your IMEI from the Device Information Page or actually get into Windows Mobile and be able to use the Unlocker found here in the forums.

alexod said:
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse
Is it mean, that at first i must downgrade it to 6.0, unlock and only after this upgrade to 6.1 ?

Exactly.
filler

[Q] SIM Re-Lock

Hi,
Does anyone know how to re-lock the SIM on Captivate? I need to reload the stock ROM and lock the SIM for warranty replacement of my phone.
Thanks in advance.

I believe once you reload the stock ROM, say using Odin one-click to JF6, your phone will be SIM locked again.
Again, I believe this is the reason why they recommend you write down your unlock code, because you'll have to go through the unlock process with every flash.

Thanks for your input but unfortunately once it's unlocked it will stay unlocked. I tried it many times myself flashing the 1-click Odin stock ROM.
I wrote down the unlock code. I actually just found this on a website but I am not sure if this will work. Wondering if anyone ever tried it...
*#7465625# = Check the phone lock status
*7465625*638*Code# = Enables Network lock
*7465625*746*Code# = Enables SIM lock
If I remember correctly, I believe I need to enable the Network lock....

norcal einstein said:
I believe once you reload the stock ROM, say using Odin one-click to JF6, your phone will be SIM locked again.
Again, I believe this is the reason why they recommend you write down your unlock code, because you'll have to go through the unlock process with every flash.
Click to expand...
Click to collapse
Not true. I have flashed many ROMs and stayed unlocked. Am currently running Perception 4 without having to re-unlock.
To re-lock:
RazvanG said:
Originally Posted by RazvanG HOW TO LOCK SAMSUNG GALAXY S – FOR WARRANTY PURPOSES ONLY (TESTED)
After you get the NCK code using the method above, enter: *7465625*638*#
There will be a pop-up box.
Complete the first field (MCC/MNC) with the network you want your phone locked to (eg. 226 10 where 226 = romania; 10 = orange etc.) and the second field (Control Key) with the NCK extracted from the .bak file.
Press OK and your phone should relock.
RazvanG
Click to expand...
Click to collapse
NCK codes are different for each country/carrier. You will have to search for yours.

startngate said:
Not true. I have flashed many ROMs and stayed unlocked. Am currently running Perception 4 without having to re-unlock.
To re-lock:
NCK codes are different for each country/carrier. You will have to search for yours.
Click to expand...
Click to collapse
Thanks. I have the NCK code for my phone. Searched wiki and found this link.
http://en.wikipedia.org/wiki/Mobile_Network_Code#U
It seems like AT&T's MCC/MNC is 310/410.
I will have to give it a try tonight.

Relock SIM to keep warranty

Hi!
Unfortunately I had to send back my phone to my operator because of a hardware fault. For warranty reasons I must restore the SIM lock (network operator lock).
I haven't find any info on xda so I want to share the process of relocking again.
First, get the unlock code with BML5 method if you didn't save it:
http://forum.xda-developers.com/showthread.php?t=1335548
Then, dial this:
*7465625*638*# (Configure Network Lock MCC/MNC)
After dialing a new window appears where you can lock your phone again.
For MCC/MNC code, check this:
http://en.wikipedia.org/wiki/Mobile_Network_Code#National_operators
For example I have to supply this code: 21630 (no '/' characters, no space)
Because
216 is Hungary MCC
30 is T-Mobile MNC
For Control Code (After MCC/MNC):
Write the Unlock Code that you have with BML5 method.
Thats all.
P.S. Don't forget to install your original stock rom if you send your phone back to your operator.

Mexico Telcel GT N7000 Unlock for Tmobile

I have Tmobile and I purchase a Samsung Galaxy Note Gt-N7000 from TelCel. Today I received the unlock code for the phone. However, when I insert the Tmobile sim it doesn't prompt me to enter the code. It only says Network Lock and one button to Dismiss. Does anyone know How I can get the phone to accept or prompt me for the code?

HI bud,
there's a similar problem on the other thread. Try to see if you can follow the instructions presented by the posters (on that thread) - >http://forum.xda-developers.com/showthread.php?t=1416175
Note on page #2 and #9 on that thread. It'll greatly help you much.
P.S. Samsung SII and Note share pretty much the same file system so it's safe to follow their instructions.

nextlevel2k1 said:
I have Tmobile and I purchase a Samsung Galaxy Note Gt-N7000 from TelCel. Today I received the unlock code for the phone. However, when I insert the Tmobile sim it doesn't prompt me to enter the code. It only says Network Lock and one button to Dismiss. Does anyone know How I can get the phone to accept or prompt me for the code?
Click to expand...
Click to collapse
what i did was flashed a custom rom.. and then changed the sim now it should give you the option to put the code there..

s6 at&t unlock codes not working

hello,
i have the samsuns s6 g920aucu3boj7.
i wanted to country unlock it from at&t and i received the unlock code and the de-freeze code
but the problem is both are not working,i heard if you enter the incorrect code many times the mobile will be permanently locked.is this true ?
if i restore it with this firmware will the code work then ?
am in Pakistan,and is there anyway to use the local sim cards ?
thankyou.

Andrew K. Sterling said:
Hi,
Try these, maybe you can solve this issue:
Apply the Defreeze + Network Code if you still get the message “Unlock Unsuccessful”. It takes 5 steps:
1. Type your Defreeze code (or MCK): xxxxxxx and press Unlock button. You will get "unsuccessful” message again but don't worry.
2. Now type the Network code (or NCK): xxxxxxxxx and press Unlock button. If your phone shows “Unlock Successful" message, congratulations, your phone is unlocked. If not, proceed to step 3.
3. Make a hard-reset or factory reset of your phone. Please be informed that a hard-reset will restore your phone to the factory settings, so all apps, data and other settings added by you will be removed. We advise you to make a backup or save all data you want to keep.
In order to make a hard-reset you can either dial *27673855# on your phone or, if this method is not working, you can use these instructions in order to make the hard-reset.
4. After your phone restarts, type the Defreeze code (or MCK) xxxxxxxx, in the area below "SIM network unlock PIN" message or "Enter Network Lock Control Key" message. Press the unlock button. It will say "unsuccessful" again, don't worry!
5. Type the Network code (or NCK): xxxxxxxx and press Unlock button. Your phone should now give you the message "Unlock Successful".
Click to expand...
Click to collapse
thanks for replying.
i have done the hard reset,still it says unlock unsucessfull after applying the de-freeze code and unlock code.
is the rom locked ? what if i restore the firmware version will it unlock it ?