Database Develop

OMG, Help! - Cannot Boot

So I am trying to Re-Flash my T-Mobile Wing.
I HAD TouchIT Vista on my Phone and wanted to put on a new version.
While trying to re-flash, like i did before, I would connect to my phone, then it would drop while starting the flash. So I decided to flash on the Stock ROM. Now, being a complete idiot, I started the Flash (BAT file) before putting Itsutils.dll into the Windows folder... Now I cannot boot into my phone. But I CAN boot into BootLoader.
I dont know how to use BootLoader tho. What do I do to get this back up and running? Dear god, I hope I didn't brick my Phone!

Try the Following:
Got to this link, post #2:
http://forum.xda-developers.com/showthread.php?t=421304
-download the Herald-USPL-Beta 3 file found on post#2
-extract the flash center folder to your desktop
-extract the nbh file from your stock rom using winrar or 7zip
-place the nbh file in the ruu folder within the flash center folder
-run the utility
*if my instructions arent clear to you, there is a full tutorial on the link that i gave you
hope this helps!!

spacemonkey333 said:
Try the Following:
Got to this link, post #2:
http://forum.xda-developers.com/showthread.php?t=421304
-download the Herald-USPL-Beta 3 file found on post#2
-extract the flash center folder to your desktop
-extract the nbh file from your stock rom using winrar or 7zip
-place the nbh file in the ruu folder within the flash center folder
-run the utility
*if my instructions arent clear to you, there is a full tutorial on the link that i gave you
hope this helps!!
Click to expand...
Click to collapse
Thank you so much for your quick response... I have been looking at that file, and have downloaded everything... but my phone wont boot into TouchIT anymore... Can i do these from Bootloader? How?

Fenopy said:
Thank you so much for your quick response... I have been looking at that file, and have downloaded everything... but my phone wont boot into TouchIT anymore... Can i do these from Bootloader? How?
Click to expand...
Click to collapse
-press and hold your camera button on the side of your phone
-while holding the camera button, press and release the soft reset button
-dont let go of the camera button until you enter a tri-colored screen.
-now you are on your bootloader screen

Yes, I know how to get into Bootloader, but How do I execute this stuff in bootloader?
I do not show a connection to ActiveSync (Or in this case, Windows Mobile Device Center) when I am in BootLoader.

Fenopy said:
Yes, I know how to get into Bootloader, but How do I execute this stuff in bootloader?
I do not show a connection to ActiveSync (Or in this case, Windows Mobile Device Center) when I am in BootLoader.
Click to expand...
Click to collapse
-remove sim and storage card
-hook your phone to your computer, and then go into bootloader while hooked to the computer
-try to run the regular stock rom utility while in bootloader
-if that does not work, then follow my instructions from above

OK...
I can ONLY get into Bootloader.
My Process:
-Load Bootloader...Ok
-Connect USB...Ok
-Start ActiveSync...Ok
-ACTIVESYNC, NOT CONNECTED..
-Start Stock ROM Utility
-No Device Connected
Going to try it with HERALD-USPL-beta3 instead of Stock-ROM now..

while in bootloader, read your spl number. is it lower than 4.0.0.0?

No.
Bootloader Screen:
IPL 4.10.0002
SPL 4.70.Yang
USB
EDIT:
How long Should I let herald-uspl.exe from Flash Center run before I give up on it?

your device should be able to run the ruu.exe provided by tmobile.
any luck with the uspl?

spacemonkey333 said:
your device should be able to run the ruu.exe provided by tmobile.
any luck with the uspl?
Click to expand...
Click to collapse
uspl doesnt seem to be going anywhere (10 min now, still step 1)
I am downloading a different Tmo rom (not the bat files i hope)
Will be trying that soon.
Thank you for your suggestions btw

are you getting any error messages?

if the ruu.exe doesn't run on the bootloader and uspl isn't working, then unfortunately, i am at a loss.
there are a few sites out there on tutorials for bricked wings... here is a link to one of them:
http://forum.xda-developers.com/showthread.php?t=417930
good luck man...wish i could help you more

spacemonkey333 said:
are you getting any error messages?
Click to expand...
Click to collapse
Okay, So now I am in a bit of a pickle... lolz
Ran the TMo Stock ROM...
It Kills my ActiveSync connection immediatly.. Doesnt see my phone.
So I reinstalled, restarted.
Retry...
Saw my phone.
Started to install. Got to 1%, then my phone booted out of BootLoader, now is back at the TouchIt Loading screen (where it is frozen).
EDIT1:
Yeah, I did the Recovery Process... It keeps going to 1% then Restarting.
EDIT2:
OMG, loading now!
Next Update Soon! (42%)

if you are getting to 1% and it is rebooting, then you should be able to use uspl to fully flash a rom. just put the nbh from your stock rom into the ruu folder and run uspl. that worked for me.

spacemonkey333 said:
if you are getting to 1% and it is rebooting, then you should be able to use uspl to fully flash a rom. just put the nbh from your stock rom into the ruu folder and run uspl. that worked for me.
Click to expand...
Click to collapse
OMG Back to Stock ROM! ****in Yey!
The Stock RUU was able to complete (When it rebooted @ 1%, I forced it back into BootLoader) it then rebooted again, but actually finished this time.

congrats
i've been through that process a long time ago i know how u feel lol

sweet. next time you want to flash a rom, just use uspl. it works for me flawlessly every time.

spacemonkey333 said:
sweet. next time you want to flash a rom, just use uspl. it works for me flawlessly every time.
Click to expand...
Click to collapse
Well, my problem came from ActiveSync... No matter what I did, It would disconnect. (This is after trying 6 DIFFERENT PCs [2 Vista] and failing) so I was trying other ways to Flash. Never again. Lolz.
EDIT:
Back at it... Flashing Hard-SPL now. lolz.
USPL totally works better... lolz.

well, its good to see that you are back in business

money against help

After hours !!! trying almost every advice I don`t know what to do ! I would for the help !
hardspl process
I did everything what is written here and it still doesn`t work:
step by step:
- this is ONLY for warranty reasons. i.e. the device needs repair and you have to send it to htc to get it serviced. if you plan to restore hardspl then don't even bother flashing this stock package, unless you are some kind of hacker/dev
- IMPORTANT: be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
- now the steps
1. download the stock spl package from this post.
2. download X1_HardSPL_v1 too, from this post.
3. run the hardspl package, but do not press Next button i.e do not go ahead with flash yet.
4. at this point, take the extracted stock SPL, a RUU_Signed.NBH file, and overwrite the other RUU_Signed.NBH in hardspl package.
Yes it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
"Hard-SPL flashes, device automatically reboots, job done"
THIS never happened but it seems that I do have the hardspl done !
BUT - the next problem when I run the RUU process I get always the error message "update error 262" which is a coomunication error.
Is there hope for me ?

What exactly are you trying to do?
and please stop posting the same thing over again, people will answer you when they get a chance!
If you are trying to get to Hardspl then why are you trying to flash back to the stock spl??
Follow the proper instructions..
http://forum.xda-developers.com/showthread.php?t=431218
From the start of the post to the 3rd lot of stars ****
If you are trying to return to stockspl having already flashed Hardspl then you wont be able to flash any more roms except the stock one.

OK !
My steps:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en done
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder. done
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment). only X1 done
3) you must Have Phone Synced with PC in Windows Mobile! done
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh) done
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar. done
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!). done !!!
7) Hard-SPL flashes, device automatically reboots, job done. THIS doesn`t happen !

****
then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
****
Have you tried this?

fards said:
****
then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
****
This next step is not possible because X1 and PC are never connected !
Click to expand...
Click to collapse

At the moment I`m working with the sd way but getting the answer "no image file"

the coloured display is saying
Kovs110
SPL-0.72....
microp1...
microp2....

more NOOB questions

I am about to swap to a new ROM on my HTC touch HD and since i am a noob i have some questions here.
1 Is it easier to use a pc with XP than with windows 7?
2 To find out what spl version you have you have to put your phone in bootloader mode, is that correct?
3 If i use a pc with windows 7 when flashing i have read that you have to install new drivers to your HTC SYNC, is that correct and where can i find those drivers?
4 HSPL vs USPL what is the most noob friendly one?
Thank you for reading this and i would be very glad if i can get some help.
Forca

Forcavitale said:
I am about to swap to a new ROM on my HTC touch HD and since i am a noob i have some questions here.
1 Is it easier to use a pc with XP than with windows 7?
2 To find out what spl version you have you have to put your phone in bootloader mode, is that correct?
3 If i use a pc with windows 7 when flashing i have read that you have to install new drivers to your HTC SYNC, is that correct and where can i find those drivers?
4 HSPL vs USPL what is the most noob friendly one?
Thank you for reading this and i would be very glad if i can get some help.
Forca
Click to expand...
Click to collapse
1. Yes
2. Yes
3. Yes
4. For the Noob it is better the USPL..

ROM update process explained in detail here:
http://forum.xda-developers.com/showthread.php?t=505377
Changing the HTC Syn driver on Vista / 7:
http://forum.xda-developers.com/showthread.php?t=524619
Download Drivers.zip
Follow screenshots

I RECOMEND FLASHING VIA SD CARD its more safe and easy

tsalta said:
I RECOMEND FLASHING VIA SD CARD its more safe and easy
Click to expand...
Click to collapse
Is there any thread out there that you know where i could read about flashing via the SD card

Forcavitale said:
Is there any thread out there that you know where i could read about flashing via the SD card
Click to expand...
Click to collapse
Not much use having a whole thread on it.. Its idiot proof
USPL has its own thread, so does hSPL so look at them (stickied)
-download rom
-run RUU
-press next once
-in the folder of the RUU youl see RUU_Signed.nbh
-Rename the nbh file BLACIMG.nbh
-copy to sd card..
-keep hold of down volume button and pres power simultaniously
-And there you go
loading... Checking...
-Press power button and wait
Soft reset

Flashing by sd card goes like this
Format the SDcard to FAT32, rename the RUU_signed.nbh to Blacimg.nbh
1. Copy BLACIMG.NBH into the root dir of your Storage Card.
2. Be sure to have at least 30% of charge.
3. Turn off your device . Fully power the device off by long press of power key.
4. Go to bootloader mode. Push and hold Vol Down + press Power button.
5. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
6. The whole procedure will take about 3 minutes. After you finish and see the relative message, hard reset your device, you are ready.

Dark Ninja said:
Not much use having a whole thread on it.. Its idiot proof
USPL has its own thread, so does hSPL so look at them (stickied)
-download rom
-run RUU
-press next once
-in the folder of the RUU youl see RUU_Signed.nbh
-Rename the nbh file BLACIMG.nbh
-copy to sd card..
-keep hold of down volume button and pres power simultaniously
-And there you go
loading... Checking...
-Press power button and wait
Soft reset
Click to expand...
Click to collapse
So downloading the ROM, i have been looking at duttys, so i will download that.That sounds like the easy part
Next step, run RUU, im a noob i dont know what run RUU means but the way you descripe it, it sounds like a program am i right?
I suppose when i know what that means the next steps will explain themselfes
Copy to SD card, should i use an empty card or will the one in the phone do?
And by soft reset i suppose you mean pressing the button on the back on the phone or am i wrong there.
After this i done i am ready to install the custom rom?
Cheers and thank you for your help
Forca.
PS. I actually managed to jailbreak my iphone, it was piece of cake compared to what this seems to be DS

Sadly it isn't quite that simple
HSPL allows you to flash roms from SDCard. Read the HSPL thread (linked to above) for information on installing HSPL to your phone; this will allow you to install custom roms from 1.56 onwards (anything from the last 12 months really). It won't work using SDCard method without updating HSPL as the stock Blackstone uses 1.19 SPL.
When you download a rom it should come in a zip file containing ruu_signed.nbh and customruu.exe. Using USPL method you need updated drivers for Win 7 (as described above), plug your phone in in activesync mode and run the customruu.exe and follow the instructions. USPL updates your SPL from 1.19 to 1.56 to allow for flashing while your phone is plugged in (tethered flashing). HSPL updates the SPL permanently (unless you downgrade it again), allowing for untethered flashing.
Using HSPL/SDCard method you rename the ruu_signed.nbh from the rom zip file to blacimg.nbh and copy it to your SDCard. Then start your phone in bootloader (hold vol down and power on) and follow the instructions. At the end pull out the battery and put it back in to restart your phone.
This guide here: http://forum.xda-developers.com/showthread.php?t=505377 stickied in the rom forum will hold your hand through the process all the way. Use it and you have no excuse to not flash a shiny new rom in the next 20 mins. Preferably 1 of my roms

millski said:
Sadly it isn't quite that simple
HSPL allows you to flash roms from SDCard. Read the HSPL thread (linked to above) for information on installing HSPL to your phone; this will allow you to install custom roms from 1.56 onwards (anything from the last 12 months really). It won't work using SDCard method without updating HSPL as the stock Blackstone uses 1.19 SPL.
When you download a rom it should come in a zip file containing ruu_signed.nbh and customruu.exe. Using USPL method you need updated drivers for Win 7 (as described above), plug your phone in in activesync mode and run the customruu.exe and follow the instructions. USPL updates your SPL from 1.19 to 1.56 to allow for flashing while your phone is plugged in (tethered flashing). HSPL updates the SPL permanently (unless you downgrade it again), allowing for untethered flashing.
Using HSPL/SDCard method you rename the ruu_signed.nbh from the rom zip file to blacimg.nbh and copy it to your SDCard. Then start your phone in bootloader (hold vol down and power on) and follow the instructions. At the end pull out the battery and put it back in to restart your phone.
This guide here: http://forum.xda-developers.com/showthread.php?t=505377 stickied in the rom forum will hold your hand through the process all the way. Use it and you have no excuse to not flash a shiny new rom in the next 20 mins. Preferably 1 of my roms
Click to expand...
Click to collapse
So if i get it right you recommend installing HSPL? The ROM i want to install is thisuttys HD WM6.5 Leo R7 WWE
Based Rom 1.59 ( CE OS Build 5.2.23016.5.3.0 ) will that work then or is it another version i want?
Thank you for answering
Forca
Thank you for helping
Forca

Forcavitale said:
So if i get it right you recommend installing HSPL? The ROM i want to install is thisuttys HD WM6.5 Leo R7 WWE
Based Rom 1.59 ( CE OS Build 5.2.23016.5.3.0 ) will that work then or is it another version i want?
Thank you for answering
Forca
Thank you for helping
Forca
Click to expand...
Click to collapse
Up to you really. I prefer HSPL myself, but only because I can't be bothered to plug my phone in all the time.

Use the dummy guide by Digital Outcast!
It gives a step by step guide to flashing, including updating the drivers in Vista/Win7.
I use USPL myself, because it will reset your SPL at the end of each flash session, so if you ever need to flash back to stock (for warranty purposes) you'll have no problem returning to the standard SPL.
However HSPL is reversable aswell (though you need to do this manually).

dont forget that hspl voids youre warranty if you send it in with hspl on it
so if you go the hspl way dont forget to put back on original spl

Suppose i will use my pc with XP on when i do it since i read that you dont have to update htc sync drivers.
Thank you all for the help

[Q] HTC Touch Diamond 2, not flashing

Dear Honorable Seniors, I am so obsessed to get some troubles with my htc (Touch Diamond 2).
I want to get rid off from my ROM that is already available on it (I dont how to find it is official or cooked and which is that version or name). I try to download many cooked ROMs to flash but tried two:
1-energy
2-mozart
but everytime flashing process stopped at 0% percent and after 6-7mint it display a window for recovery. I do restart my system and got the prior windows version, no flashing at all.
I thought there may be Hard-SPL issue (although I dont know what is it). I download its compatible version and try to flash Hard-SPL it also stuck at 0% and not moving upwards.
Help will be appreciated in their respect.
Sorry if my english not comprehendable I am not english speaking person.
regards,
Muqaddas Shahzad
[email protected]
+923222000048

1. Install HSPL. Follow instructions in the thread.
2. Install custom ROM.
You cannot install a ROM until you have installed HSPL first.

I think Muqaddas has already tried HSPL as he described in the post, but the progress stuck @ 0%.
Muqaddas, may be you can try below:
- Disable antivirus software, temporarily, on your PC
- Do HSPL (1.83 and update to 2.51)
- Use Advance ROM Update Utility to do a Task 29.
- Upgrade to latest Radio ROM, if not latest.
- Flash the ROM you wanted.
Hope this will help you .
Thanks.

dear prabhat thank to reply me dear:
1-during Hard spl I found my version is already about 2.16.415.3 and the version I got from Hard-spl link (your given) is showing 1.83.OliNex, yet I tried with this but again stuck at 0% (error code---262)......Can yoy please tell me how Can I check That my cell is already did hard-spl on it-----and how to know it is CID-Unlocked...............
2-by using Advance ROM Update utility, it also not being flashed and giving the same error 0% (code-262)
may this because of my PC operating system which is Windows 7?
but I have flashed HTC Touch Diamond in the same system.....
please help me, my already OS disturbing me alot.
i-windows (send-don't error)

muqaddas_dunyatv said:
please help me, my already OS disturbing me alot.
i-windows (send-don't error)
Click to expand...
Click to collapse
WIN7 could be your issue, it is best to use XP. Also it is important to install the enablenewrapi.cab
You can check your SPL level by entering bootloader mode (holding Volume Down as device reboots until you get to the tri-colored screen)to verify that your SPL: version has "Olinex" as a suffix.
How to flash?
RUU.exe method;
1. Download enablenewrapi.cab, copy to your device with ActiveSync (WMDC) and execute the cab.
2. Download Topaz_CustomRUU_v1.1.zip and both the 1.83 and 2.51 HSPL files.
3. Place the CustomRUU.exe and the RUU_Signed.nbh file from the 1.83 version into the same folder on your PC.
4. With your device sync'd, run the CustomRUU.exe and follow the prompts on your PC.
5. If successful, the progress bar will go to 100% and you can enter bootloader mode (holding Volume Down as device reboots until you get to the tri-colored screen)to verify that your SPL: version has "Olinex" as a sufffix.
If so, you've successfully flashed HSPL.
Repeat steps 3-5 for 2.51
If unsuccessful....
SD Card Method;
1. Rename the RUU_Signed.nbh to TOPAIMG.nbh and place on the root of your FAT32 formatted SD card.
2. Enter bootloader mode and it should initiate the flash. You may get an error of "No Image Found" or you get progress bar stuck at 0%. This would be a failed flash, just soft reset and you'll be back to stock.
If still unsuccessful....
Try the HardSPL_V5_00R5_183HSPL.zip

my respectable serniors please help me out, I tried to change the PC which has Windows XP, and followed all the procedures you all honored but still stock on 0%.....
dear I try to flash PHOTON ROM through storage card by renaming it and placing it into the root of SD card but not being flashed................
please help

HI Muqaddas,
The issue seems to be somewhere in HSPL and the device is not ready for any custom ROM yet. I dont think PC OS has anything to do here unless the "Antivirus S/W is disabled".
Once you device is CID unlocked you should able to install any ROM .
But as you are telling you can see "1.83.OliNex" in the Bootloader... so Can you try to update that to 2.51 and see if that work?
Also try searching the "error code---262" in the HSPL thread, whihc may give you some idea...
EDIT:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
As you said you can see the OliNex in bootloader your device is CID unlocked.
Can you try below and see if that work:
1) Upgrade your HSPL to 2.51.
2) Start Windows Mobile Device Center
3) Start your device in TriColor boot loader mode.
3) Connect you USB to PC and and make sure your device bootloader white screen say "USB"
4) Now start flashing from PC using RUU.
See if this work else try "SD Card Method" suggested by Bruce.
Hope this will help...
Thanks.

On Ur phone go to Settings-> Connections -> USB to PC & "uncheck" the option Enable faster data synchronization & then try ...worked for me

I am sorry to be desperate but after following all the precedures suggested in this place I am not successful...
I was hopefull that I might flash my TOPAZ after getting 512mb card and after many struggles I arranged it for flashing .....
but after bootloader it stuched at
loading.....
please help if someone can

Try restoring your bootloader to the stock, flash a Windows stock ROM, then come back with HSPL and custom ROM.

Hey, May be you can go to service center near to you and ask them to install new ROM so that they will install new ROM and may be try to unlock the phone if it is with them...
Once they install new ROM then I think you can continue HSPL here and have fun .
Thanks.

Dear Hamsn, Where I can get Windows stock ROM, Please any link or description......

You can get that from HTC website of your region.
Goto: http://www.htc.com/uk/selectcountry.aspx
Select your country -> Click Support -> Select your device and download the latest ROM update.
Of you can grab from here: http://shipped-roms.com/index.php?category=windows mobile&model=Topaz
(File: RUU_Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe)
Just sync your device in PC and run the above file and all should get updated .
Cheers!!!

Help XPERIA X1i

Hello everyone.
I recently became the owner of XPERIA X1i and now I am interested in the following:
1-How do I change the ROM, as is now in Italy to switch to English language.
2-What ROM to download and from where.
3-What other programs are required to change the ROM
I read the forum but we do not succeed to find his way around changing ROM
The data from the phone from bootloader screen
kovs110
SPL-0.78.0000
MicroP1-787
MicroP2-707
Please ask for help because I do not know a word of Italian
Something else I am from Serbia

Hello,
at first you have to unlock your phone with hardspl:
http://forum.xda-developers.com/showthread.php?t=431218
Instructions to flash Hard-SPL:
it's recommended you run the basic package, and don't flash the other attachment (MFG SPL - it is only for hackers).
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment).
3) you must Have Phone Synced with PC in Windows Mobile!
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh)
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
7) Hard-SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.72.OliNex (or 0.52.OliNex MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned OFF, press and hold the volume down button along with the power button, then release the power button, and finally release volume down button when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically(your device doesn't go to tricolour screen), please copy Xperia-SSPL-Manual.exe from the Xperia-SSPL-Manual.zip attachment to the device and run it. then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
NOTE 3: this is unsigned Hard-SPL. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here - scroll down!
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Click to expand...
Click to collapse
now you can flash all modified roms.
i recommend you to flash roms with the "Micro SD Method".
look at: http://forum.xda-developers.com/showthread.php?t=445662
these are some good roms:
826x Series: http://forum.xda-developers.com/showthread.php?t=734175
Dynamics 2.1: http://forum.xda-developers.com/showthread.php?t=951694