Any way to change to 2g on froyo similar to 2.1 with dialpad
Sent from my SAMSUNG-SGH-I897 using XDA App
*#*#197328640#*#*
then click (1)debug screen
(8) phone control
(4) UE state control
then 2 or 3 depending what you want to switch to/from
works on eclair and froyo
garebear0506 said:
Any way to change to 2g on froyo similar to 2.1 with dialpad
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
This really belongs in Q&A, is it really that hard to put it where it belongs? I mean really? This happens every day and just looking at the Dev board you can tell it was cleaned up once today...
Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App
Does my phone with cm 6.1 still run data on evdo or is it really 3G and not just icon swap.
Sent from my HERO200 using XDA App
EVDO is Sprint's "3G", just an icon swap as it is not a Sense rom.
Hello everyone, since I rooted my hero I been having lost of signal all the time. I install telenav but it didn't work.
Does any one have any ideas?
Sent from my HERO200 using XDA App
Which ROM are you using?
I'm using cyanogen mod 6.1 stable
Sent from my HERO200 using XDA App
lrturell said:
I'm using cyanogen mod 6.1 stable
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Download a GPS app. There are a few on the Market. Search for "GPS status".
The same thing happens to me, I dl GPS status and whenever you loose the signal go to GPS status ( PARK FIRST IF YOU'RE DRIVING BTW!!) -> Tools -> Manage a GPS --> Reset , then re-download GPS assistance data. Then go back to your GPS app and it should lock-on again.
It is a major pain in the ass, but it's one of those trade-offs for having Froyo on a phone that was not designed for it and giving Sprint the finger.
Thank you, downloading the app.
Sent from my HERO200 using XDA App
this may be unrelated but IF you are using one of deca's kernels try enabling cfs tweaks in the batt-cfg, that helps my gps lock way faster and much stronger.
Hello, Having GPS issues as well after I rooted. I am running 2.3.2 with Cyan mod 7 on Sprint HTC Hero. I get GPS signal for about 2-3 minutes then lose signal. I have tried Google Nav and Map Quest. I have installed GPS Status and GPS will connect when I do the steps above through GPS Status, then I lose signal after 2-3 minutes. To be honest I am new and do not know much about the kernel. It reads 2.6.29.6 aospGBmod. Any help would be appreciated. Thanks!
GPS can be touch and go with the CM7 builds but most of us can go at least a half hour or more with a lock and no issues. Your kernel is the stock kernel for aospCMod. There are several other kernels you can use, namely the 43 and 589 kernels by Deca in the development section. Download one of the kernels and after you flash the ROM and gapps, flash the alternate kernel and see if it helps with GPS.
Sent from my HTC Hero CDMA using XDA App
I gave my GPS an extended workout yesterday. Only issue I had was a reboot after about an hour and a half, and I think that was because my phone was getting warm. No lock loss, it was accurate, no problems. I was on cm7#18 at the time and using nav.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
Thanks Anthony. Flashed to 589 and it is a little better. Plus it was sunny here this afternoon so I am sure that helped a little.
No problem. We'll see if the new builds can finally put an end to the GPS problems.
Sent from my HTC Hero CDMA using XDA App
I was wondering how to enable the 3g on my captivate. Im using Continuum v6.1, when I load my web browser it says 3g then turns off n says H. Is this a normal issue or should I flash back to a different rom. Sorry im fairly new to this and I didn't find anything related to my issue in the search
Sent from my SAMSUNG-SGH-I897 using XDA App
H stands for hspa. It is a faster form of 3g, it is capable of speeds twice as fast as normal 3g.
Oh really? That's great thanks man. Learn something new everyday.
Sent from my SAMSUNG-SGH-I897 using XDA App
Ok here's the specs
Gingervolt 1.3
Latest Blitz kernal (kernalizer in supercharge script applied)
Supercharged
Couple tweaks from the tweaks collection in dev. Forums
ickangwich latest version theme
CPU set by rom toolbox to 1401 max
460 min
On smartass2 gov.
And the problem...
Quite often i will be enjoying the hell out of my revo, then it happens. An unresponsive screen. I have to turn the screen off in order to fix it. Which really sucks when right in the middle of a epic cartoon wars battle... and really frustrated me writing this... PLEASE SEND HELP!!!
Sent from my VS910 4G using Tapatalk
kcarden said:
Ok here's the specs
Gingervolt 1.3
Latest Blitz kernal (kernalizer in supercharge script applied)
Supercharged
Couple tweaks from the tweaks collection in dev. Forums
ickangwich latest version theme
CPU set by rom toolbox to 1401 max
460 min
On smartass2 gov.
And the problem...
Quite often i will be enjoying the hell out of my revo, then it happens. An unresponsive screen. I have to turn the screen off in order to fix it. Which really sucks when right in the middle of a epic cartoon wars battle... and really frustrated me writing this... PLEASE SEND HELP!!!
Sent from my VS910 4G using Tapatalk
Click to expand...
Click to collapse
Which tweaks did you use and what option do you have set on the Supercharger? You could try lowering the Min too. Take it down to 250 and see how that does. If the doesn't work you can try overclocking more or dropping it lower than 1.4gHz.
Sent from my Volted Ice Revo using Tapatalk.
I think it is a problem with gingerbread. Mine does that and I'm only on my theme.
Sent from my VS910 4G using Tapatalk
Mine will do it also
spc_hicks09 said:
Which tweaks did you use and what option do you have set on the Supercharger? You could try lowering the Min too. Take it down to 250 and see how that does. If the doesn't work you can try overclocking more or dropping it lower than 1.4gHz.
Sent from my Volted Ice Revo using Tapatalk.
Click to expand...
Click to collapse
Here's what the last few lines of my build.prop looks like
ro.config.hwfeature_wakeupkey=0
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
debug.sf.nobootanimation=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960 net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960 net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
Supercharger is the most aggressive 512hp settin
Sent from my VS910 4G using Tapatalk
I don't think it has anything to do with any tweaks mine does it when running a stock deodexed ROM. Basically the screen freezes Arnd you turn it off and turn it back on and unlock it and it works again.
Sent from my VS910 4G using xda premium
indyred99 said:
I think it is a problem with gingerbread. Mine does that and I'm only on my theme.
Sent from my VS910 4G using Tapatalk
Click to expand...
Click to collapse
Yeah I believe it's a gingerbread issue. It happened to me on stock gingerbread.
Sent from my VS910 4G using XDA App
Happens to me too. several times a day.
Sent from my VS910 4G using xda premium
Mr Frog said:
Yeah I believe it's a gingerbread issue. It happened to me on stock gingerbread.
Sent from my VS910 4G using XDA App
Click to expand...
Click to collapse
So there's absolutely nothing we can do about it? That's awesome... i just love lg!
Sent from my VS910 4G using Tapatalk
try using option 5 in supercharger instead of 7, also check for redundancies in build.prop etc. (a friend had 4 entries of kak & SC in favorites and in build.prop) if you've ever updated the script. If its the same that mt burned into gv 1.3 you should be ok in that regard, however if you've ever installed other scripts/appkiller apps and so forth that affect kernal or memory settings you could be having conflicts. But to be honest I've had the screen freeze when it was stock and unrooted. I still have them but pretty rarely anymore.
Sent from my VS910 4G using XDA App
This was happening with lg/Stock v7 pretty sure nothing can be done except lock then unlock screen
sent from my V6 Supercharged LG Revo BlueVolt
Lies!!! Thanks hicks for the advice. Changed min to 250. Now instead of freezing where i have to lock/unlock, it simply lags a little. But its real quick to catch up.
Sent from my VS910 4G using Tapatalk
kcarden said:
Lies!!! Thanks hicks for the advice. Changed min to 250. Now instead of freezing where i have to lock/unlock, it simply lags a little. But its real quick to catch up.
Sent from my VS910 4G using Tapatalk
Click to expand...
Click to collapse
Glad you got it working a little better now! You say it still lags though? What do you have the max set at for it now?
spc_hicks09 said:
Glad you got it working a little better now! You say it still lags though? What do you have the max set at for it now?
Click to expand...
Click to collapse
i kept the max at 1.4... so far its pretty stable.. hasnt done it in a couple days but the lag is only in the keyboard. like i'll type something and i think it froze again, but a second after it catches back up with what im typing. it hasnt froze yet since i set it there so maybe it worked?
It happened to me when I changed my CPU settings.
I would get random locks at 1.5GHz on Smoothass. Changed it down to betwee 1.2-1.4 and haven't seen it yet.
You can try reflashing Blitz