Hello
So I have flashed my rom several times and this time.. I might have seriously bricked my phone.
Odin is stuck at Set partition with the following messages:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
I have opted to flash to JPC (which I have successfully flashed to several times) and have checked re-partition, auto re-boot and f. reset time.
I do not remember having to wait this long on this step.
Appreciate any help.
i try the followings usually (not in sequence)
disconnect usb
reboot the phone
restart odin
Thanks.... I pulled the batt... restarted odin this time with re-partition unchecked and its working now..
Thanks, this worked for me as well!
I did just as you said, but checked "re-partition". It worked as a charm! Thank you very much!
I get the same problem
I get the same problem, but for me i cant go to download mode. when phone rebbot i have a icon ( this is not conetion between pc and phone), i can't go to download mode either by comand ou by typing volume down+menu+off
Can you help me?
Hi everybody,
I'm new to xda, just joined today because i ran into some trouble. Android 2.3.4 Gingerbread just appeard and i thought to flash my Galaxy S. I've done the following, i transfered all of my files from the phone to the pc, did a format on the internal and external sd card, did a factory reset, unmounted the external sd card, removed the sim then put the phone in downloading mode. Then i got Odin3 v1.85 and the files needed to flash:
The pit file: s1_odin_20100512.pit
The phone file: MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5
The CSC file: GT-I9000-CSC-MULTI-OXAJVP.tar.md5
The PDA file: CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5
Started Odin, loaded all the files in their right spot, connected the phone to the usb cable, odin recognized it, checked the Re-Partition box, the Auto Reboot box and the F. Reset Time box then clicked on start. Then the following appeared in odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
and now it's stuck (or i think it's stuck) on Set partition, it's been on Set partition for about an hour and my question is, do i wait a little more longer or did i just bricked my phone ?
LE: oh and i forgot to mention, i had 2.2 don't know the exact code but it was the russian version that came with the phone and it wasn't rooted
@bigbrother88
Unplug the phone, remove the battery for a few min. and try to flash again.
You must only use the original Samsung USB-cable to flash the device.
If your device is Russian then the CSC code is SER, remember that if you want to flash back your device to the original firmware.
I unplugged the phone, taken out the battery, left it like that for 5 min then i tried again. Now it seems to be stuck at:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
I'm using the usb cable that came with the phone, so i guess it's the original Samsung USB cable.
Can i flash the phone without checking the Re-Partition box ? And i am loading all of the files at once, the pit, pda, phone and csc, i don't need to do some files first then others right ?
And sorry if i'm being such a nuisance but this is my first time trying to flash galaxy s
LE: finally i managed to flash my phone, all i had to do is uncheck Re-Partition box and worked like a charm, thank you for your help
Remove all about KIES not thr driver ... and flash it..
Sent from my GT-I9000 using Tapatalk
Use another Odin version
I had the same issue...
Use another Odin version and will work.
I used the one included in the EZbase package.
- Disconnect phone from computer.
- remove battery, leave it for two minutes.
- Open task manager, kill the Kies process if its running in the back ground
- open odin 1.3, check repartition, select files
- go to download mode, connect phone and start flashing
you should be fine, don't be in a hurry
The first time I experienced exactly the same I got pretty mad...but patience made it for me in the long run
Sent from my GT-I9000 using XDA App
Experienced the same here. You have to kill any "kies" processes on your pc by taskmanager!!!
No need to pull battery! Just press on/off button long enough and then re-enter download mode and reconnect via usb.
Worked here with odin 3 v1.82 pit file and repartition checked.
Uhh, I realize it might be considered an old thread, that should not be resurrected.. but what "fixed" it for me is running Odin as an Admin.
Was flashing from custom ROM to the stock 2.3.5 and got the same Set Partition issue. Solution was like said above: disconnet usb, pull out battery for two minutes and flash again.
Useful thread. Kies was the culprit in my case!
If you don't use kies just uninstall it and use only the usb drivers http://forum.xda-developers.com/showthread.php?t=728929
Thank you
I did this...
disconnect usb
reboot the phone
restart odin
...then tried it again with all 3 boxes checked again and it worked.
ykk_five said:
i try the followings usually (not in sequence)
disconnect usb
reboot the phone
restart odin
Click to expand...
Click to collapse
Works great for me. Thanks alot!
Related
Hey guys, I don't know if this is the right place to post, I'm new so go easy on me!
so today i tried to go downgrade my phone to eclair 2.1. I was currently using a custom rom (miui) with CM7
i went on odin i used a pit 512 file "s1_odin_20100512.pit"
WHILE i was flashing my galaxy s, my computer shut down! when i tried to turn on the phone it didnt want to start.
I STILL have access to the download mode when i try several times the vol down, home, and power button combo
So i would like to know if i have an hope to make work my phone again and recover from this issue.
1st-why the hell would you like to downgrade your phone to eclair?
2nd-use a full rom with repartition -for example js8 full or jpu- with odin and 512 pit. make sure that your computer doesn't shut down again
note: while your computer shuts down while you were flashing boot.bin, sbl.bin or param.lfs your phone will be worth paper weight. so be careful.
Thanks for the quick reply! Do you maybe have a link where i could download that jpu rom?
go to samfirmware.com
you will need to sign up, but it's free, so it will take you 2 minutes to complete
So i downloaded a I9000XX JPU firmware, I used a pit 512 file but i think that i got an other probleme. here's the Odin log
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
Im stuck at Setup Connection, 10 minutes laters nothing happened yet.
setup connection, means its having trouble connecting to your phone, make sure KIES is not running, try another USB port, one that goes direct into the motherboard of the pc. and try again
you should be ok
Also run Odin as Administrator if you're on Vista or Seven.
Thanks a lot for your help! yes you were right i had to restart odin to make it work
Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?
tamburyniarz said:
Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?
Click to expand...
Click to collapse
Hello. Sorry for my english. You can try this guide http://forum.xda-developers.com/showthread.php?t=1551156
Sure you need Samsung Usb Driver or install Kies in your pc (kies installs drivers too).
good luck.
Now, odin see my device. I unistalled all drivers and whole Kies, and installed agan. But now I've another problem. When I trying flash Oden failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using "Odin3_v1.84", PIT file : "cooperve_0623.pit" and ROM: "S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5" from samfirmware.com
I don't know what i'm doing wrong. I wanted add picture but i can't - I don't have 10 posts...
I used this ODIN 1.87 is preconfigured for 5830i you dont have to configure, only select files. The .pit file i used is include. http://forum.xda-developers.com/attachment.php?attachmentid=1058320&d=1336911330
1st. Turn on phone in download mode.
2nd. Press volumen up in phone to continue.
3rd. Plug usb in pc
4rd Open Odin.
Sorry for my english, good luck
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now it's this. Maybe other soft,but I dont know which one?
@edit
One more question: If i have one-file om i put it in PDA box?
To FirmWare Work in ODIN, is needed split file in parts, The ODIN only flashes BOOT PHONE PDA and CSC parts!
Docky73 builded one utility for CygWin and linux split the file in parts.http://forum.xda-developers.com/showthread.php?t=1611225
I'm do it! It's weird, but I only used other usb cable. When I do it all was fin. Thankfor helping. It was very helpfull.
Still not working
I have try the above method and i m still unable to flash this galaxy ace s5830i.
find attached the screenshoot that i took.
really need help to update this phone
thank in advance
Have you closed kies. . If kies running background your flashing will never get success. .May be silly but check once
Sent from galaxy ace running S3 beta 3.1 evolution
Kies is not installed I have remove it to prevent this issue
Sent from my GT-N7000 using xda app-developers app
Hmm this is odd..
Flashed this GB Stock via PC Odin many times and competes without issue, Tried it today and I am currently stuck at Get PIT for Mapping... It;s a single file ROM I am trying and no I have not selected to use a PIT file or repartition or anything...
Everything is the same as normal,
Phone just shows in Download mode but with no activity...
Any ideas? Am I safe to do a battery pull / disconnect it at this point? Do I wait? Its been like this for half hour or soo..
Very strange..
This is where I'm stuck -
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
From the above - it has not started any "Push" activity yet and there's nothing showing (Progress bar or anything) on the phone so I assume it's cool to pull the cable.. Just wondering if anyone else had this issue...
Fix Info
If you're like me and a little worried about things like this then it's best to ask - As i stated, from my understanding here, ODIN had NOT started any NAND write.
This was resolved by unplugging the USB > ODIN immediately turned to "Failed" > Rebooted phone > Rebooted PC > Success..
I DO NOT recommend unplugging USB from ODIN without either A} Knowledge or B) Advice
If it HAS started to write and you're stuck somewhere other than this (Factory_FS / Data IMG etc), seek advice.. and most of all 'Search before asking....'
Thanks all
replied to PM
Here a SS
Cheers Dr. K
Was looking for just that kind of assurance
I pulled the cable and all is well, Probably something rogue running on my PC as I've used the image to flash before loads of times..
Oh well, I'll wait until I finish work and try again
Yeah this is common, nothing serious.
pit mapping starts everytime, even you dont select pit.
cheers !
dr.ketan said:
Yeah this is common, nothing serious.
pit mapping starts everytime, even you dont select pit.
cheers !
Click to expand...
Click to collapse
Well I spoke too soon!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.bin
<ID:0/005> modem.bin
<ID:0/005> Sbl.bin
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
Stuck here for an age now...FFS
So......
I've not got an expensive paperweight it would seem?
Any ideas guys, I've offered alot in the past and this is purely trying to flash a GB Stock ROM i've used a thousand times in PC Odin....
Could it be a comms error? My laptop is ****e...
Flash Pre rooted ROM from my signature.
Phew All sorted...
My advice is don't do **** on a HP laptop hahaha
Nah - i think I lost connection once or twice - AzzleDazzle on his IIRC was a saviour - cheers for the replies - I'm back - I'm Stock - and I am updating...
So in effect - this was a massive PC issue....
As I said - Dr. You're always as asset to have on hand and sorry if I spammed ya PM's - was just having a heart attack there for a few..
Without succes
Do have the same problem on my Note 2 and tried to fix it as shown, but withoiut succes. Hope Dr. Ketan, you or another Android cardiologist may help me, Please.
CJSlim79 said:
Hmm this is odd..
Flashed this GB Stock via PC Odin many times and competes without issue, Tried it today and I am currently stuck at Get PIT for Mapping... It;s a single file ROM I am trying and no I have not selected to use a PIT file or repartition or anything...
Everything is the same as normal,
Phone just shows in Download mode but with no activity...
Any ideas? Am I safe to do a battery pull / disconnect it at this point? Do I wait? Its been like this for half hour or soo..
Very strange..
This is where I'm stuck -
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
From the above - it has not started any "Push" activity yet and there's nothing showing (Progress bar or anything) on the phone so I assume it's cool to pull the cable.. Just wondering if anyone else had this issue...
Fix Info
If you're like me and a little worried about things like this then it's best to ask - As i stated, from my understanding here, ODIN had NOT started any NAND write.
This was resolved by unplugging the USB > ODIN immediately turned to "Failed" > Rebooted phone > Rebooted PC > Success..
I DO NOT recommend unplugging USB from ODIN without either A} Knowledge or B) Advice
If it HAS started to write and you're stuck somewhere other than this (Factory_FS / Data IMG etc), seek advice.. and most of all 'Search before asking....'
Thanks all
Click to expand...
Click to collapse
i am stuck there too.
i just wanted to ask....
WHEN IM STUCK THERE...I NEED TO UNPLUG REBOOT THE TAB AND GET BACK TO DOWNLOAD MODE AND RECONNECT WHILE ODIN IS STILL RUNNING ON PC....right?
but odin doesnt recognize the device again...
please help.
---------- Post added at 09:27 AM ---------- Previous post was at 09:26 AM ----------
CJSlim79 said:
Hmm this is odd..
Flashed this GB Stock via PC Odin many times and competes without issue, Tried it today and I am currently stuck at Get PIT for Mapping... It;s a single file ROM I am trying and no I have not selected to use a PIT file or repartition or anything...
Everything is the same as normal,
Phone just shows in Download mode but with no activity...
Any ideas? Am I safe to do a battery pull / disconnect it at this point? Do I wait? Its been like this for half hour or soo..
Very strange..
This is where I'm stuck -
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
From the above - it has not started any "Push" activity yet and there's nothing showing (Progress bar or anything) on the phone so I assume it's cool to pull the cable.. Just wondering if anyone else had this issue...
Fix Info
If you're like me and a little worried about things like this then it's best to ask - As i stated, from my understanding here, ODIN had NOT started any NAND write.
This was resolved by unplugging the USB > ODIN immediately turned to "Failed" > Rebooted phone > Rebooted PC > Success..
I DO NOT recommend unplugging USB from ODIN without either A} Knowledge or B) Advice
If it HAS started to write and you're stuck somewhere other than this (Factory_FS / Data IMG etc), seek advice.. and most of all 'Search before asking....'
Thanks all
Click to expand...
Click to collapse
i am stuck there too.
i just wanted to ask....
WHEN IM STUCK THERE...I NEED TO UNPLUG REBOOT THE TAB AND GET BACK TO DOWNLOAD MODE AND RECONNECT WHILE ODIN IS STILL RUNNING ON PC....right?
but odin doesnt recognize the device again...
please help.
You need to restart both the phone in download mode and close odin and then restart odin
Sent from my GT-N7000 using xda app-developers app
Get PIT for mapping..
(Get PIT for mapping..)
You need to check cable or to replace cable some samsung needs original cable.. thats it
CJSlim79 said:
Phew All sorted...
My advice is don't do **** on a HP laptop hahaha
Nah - i think I lost connection once or twice - AzzleDazzle on his IIRC was a saviour - cheers for the replies - I'm back - I'm Stock - and I am updating...
So in effect - this was a massive PC issue....
Click to expand...
Click to collapse
:good: Thanks a lot! Stuck for days on end trying to root my Galaxy S3 t999 when I ran across this. I switched from my HP laptop over to my Dell desktop setup and everything ran perfectly on the first try! I was pulling my hair out trying to figure out why Odin kept failing and I couldn't root. Don't know what's up with those HPs.
Solution
You need change other cable. This will change problem
i tried and OK !
delete
Error odin invalid ext4 image firmware italy to germany(BTU)
Hello i have the simil problem with my galaxy note 4 (SM-N910F) (I'm italian), i try to flash firmware italy in my phone because i have the germany firmware (BTU) but odin screen error invalid ext4 image, i have read tha t the problem is the pit or the partition in my phone. what should i do for flash my firmware in my phone thanks a lot.
Post odin log
Sent from my SM-N910G using xda premium
Odin: invalid ext4 image and the odin in desktop on my computer write fail and the smartphone don't reboot
Sent from my SM-N910F using XDA Free mobile app
Copy paste full error log from odin
Sent from my SM-N910G using xda premium
Hi everyone, sorry if this is the wrong place for this post, mods pls move it to the right forum.
I have a non-rooted, non-operator free Samsung Galaxy Note with Gingerbread and I want to root it, set it operator free and flash ICS.
I tried to flash a ROM via Odin (N7000XXLPY_N7000OXALPY_DBT), followed the steps (open Odin, select the md5 file @ PDA, startup the phone on download mode, connect the phone to pc, now Odin recognizes it and shows the yellow case, then I press start) but at a certain point it just stops working and I dunno what to do, its frustrating...
Here's the Odin's Console log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
It just stops at this point and don't do nothing... What can I do?
kelomancer said:
Hi everyone, sorry if this is the wrong place for this post, mods pls move it to the right forum.
I have a non-rooted, non-operator free Samsung Galaxy Note with Gingerbread and I want to root it, set it operator free and flash ICS.
I tried to flash a ROM via Odin (N7000XXLPY_N7000OXALPY_DBT), followed the steps (open Odin, select the md5 file @ PDA, startup the phone on download mode, connect the phone to pc, now Odin recognizes it and shows the yellow case, then I press start) but at a certain point it just stops working and I dunno what to do, its frustrating...
Here's the Odin's Console log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
It just stops at this point and don't do nothing... What can I do?
Click to expand...
Click to collapse
Usually ODIN takes a lil long to flash a rom.So give it a good 10mins time and see it comoletes the installation....
Or you may use the new ODIN by grgsiocl.It shows the remaining time left to finish flashing.Its there in themes and apps section.
Sent from my GT-N7000 using xda app-developers app
sometimes 30 or more minutes.
Usually it stops there either thought corrupt download of rom, redownload it try again.
Or because you have bricked it "op op" emmc "style" way.
If you did not root phone, or put different kernels on, then dont do anything and contact entropy, he is looking for a case where without this the phone was superbricked.
Sent from my GT-N7000 using Tapatalk 2
You may not have all the drivers from Samsung? Download Kies, run it. Then turn off Kies, antivirus and firewall. Commissioning Odin as administrator.
Wait for atleast 20 mins approx to get the stage completed or throw out to samsung service center to get it done.
Swyped From My Juicy Flavoured AOKP JB.
Hello,
I have I rare problem. I tried to flash a new ROM and it failed, so now the phone is stuck on the boot image. Ok, usualy I would have solved this with CMW 3 button recovery combination, but my phones Home button is broken so I cannot acces it, but I made the USB Jig and can acces download mode.
My question is how do I unbrick my phone?
What I tried: Using SDK tools to reboot the phone in recovery with ADB, no succes. Sdk doesnt see my device.
Something called Fastboot, but from what I read Samsung doesn't have such a feature for the phone to enable.
Thank you.
I had the same problem a couple of time ago, but all 3 buttons were defect (see my signature ).
What I always did:
when you can get in download mode then restock via odin and phone will boot again.
Here is slappys rescue kit what i always use when i have to restock.
Unzip it and flash the Rom via Odin. There is also a txt file with a guide included.
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
With this flashed rom you will have in the power down menue the funktion: back to recovery or back to download. So first time go back to download mode or use usb jig again and then flash the included root kernel.
Then flash the rom of your choice.
If you would go to jelly bean i would recommend to use Mackays 1.3.0. first. Because you have to flash JB twice or even 3 times and after the first flash of this Mackay it goes automatically back in recovery mode.
Link to older Mackay Roms:
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/JB41/old
After flashing this you could go to google play and download an app for softkeys for example softkeys for root users.
After that and if you want or like you could flash also a JB rom with included virtual softkeys, like for example SLIM. You have to enable the navigation bar in settings but after that you can use your phone quite normal.
Hope this helps and wish you a good success!
How long should it last to restock with odin?I'm waiting for about 30m and nothing. Still says Do not turn of target! No Loading bar n phone or Odin showing any progress. What is wrong?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
Solved it. I was using the USB port in front of the Desktop unit and i guess it doesn't have enough voltage. Worked when i switched to the back USB port. Thanks a lot man!! You saved my phone !
rahbert said:
How long should it last to restock with odin?I'm waiting for about 30m and nothing. Still says Do not turn of target! No Loading bar n phone or Odin showing any progress. What is wrong?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
Click to expand...
Click to collapse
rahbert said:
Solved it. I was using the USB port in front of the Desktop unit and i guess it doesn't have enough voltage. Worked when i switched to the back USB port. Thanks a lot man!! You saved my phone !
Click to expand...
Click to collapse
Great and Strike . Glad i could help and you can use your phone again!
Have fun with it and enjoy...perhaps JB?!