Database Develop

Odin stuck at Set partition

Hello
So I have flashed my rom several times and this time.. I might have seriously bricked my phone.
Odin is stuck at Set partition with the following messages:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
I have opted to flash to JPC (which I have successfully flashed to several times) and have checked re-partition, auto re-boot and f. reset time.
I do not remember having to wait this long on this step.
Appreciate any help.

i try the followings usually (not in sequence)
disconnect usb
reboot the phone
restart odin

Thanks.... I pulled the batt... restarted odin this time with re-partition unchecked and its working now..

Thanks, this worked for me as well!

I did just as you said, but checked "re-partition". It worked as a charm! Thank you very much!

I get the same problem
I get the same problem, but for me i cant go to download mode. when phone rebbot i have a icon ( this is not conetion between pc and phone), i can't go to download mode either by comand ou by typing volume down+menu+off
Can you help me?

Hi everybody,
I'm new to xda, just joined today because i ran into some trouble. Android 2.3.4 Gingerbread just appeard and i thought to flash my Galaxy S. I've done the following, i transfered all of my files from the phone to the pc, did a format on the internal and external sd card, did a factory reset, unmounted the external sd card, removed the sim then put the phone in downloading mode. Then i got Odin3 v1.85 and the files needed to flash:
The pit file: s1_odin_20100512.pit
The phone file: MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5
The CSC file: GT-I9000-CSC-MULTI-OXAJVP.tar.md5
The PDA file: CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5
Started Odin, loaded all the files in their right spot, connected the phone to the usb cable, odin recognized it, checked the Re-Partition box, the Auto Reboot box and the F. Reset Time box then clicked on start. Then the following appeared in odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
and now it's stuck (or i think it's stuck) on Set partition, it's been on Set partition for about an hour and my question is, do i wait a little more longer or did i just bricked my phone ?
LE: oh and i forgot to mention, i had 2.2 don't know the exact code but it was the russian version that came with the phone and it wasn't rooted

@bigbrother88
Unplug the phone, remove the battery for a few min. and try to flash again.
You must only use the original Samsung USB-cable to flash the device.
If your device is Russian then the CSC code is SER, remember that if you want to flash back your device to the original firmware.

I unplugged the phone, taken out the battery, left it like that for 5 min then i tried again. Now it seems to be stuck at:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
I'm using the usb cable that came with the phone, so i guess it's the original Samsung USB cable.
Can i flash the phone without checking the Re-Partition box ? And i am loading all of the files at once, the pit, pda, phone and csc, i don't need to do some files first then others right ?
And sorry if i'm being such a nuisance but this is my first time trying to flash galaxy s
LE: finally i managed to flash my phone, all i had to do is uncheck Re-Partition box and worked like a charm, thank you for your help

Remove all about KIES not thr driver ... and flash it..
Sent from my GT-I9000 using Tapatalk

Use another Odin version
I had the same issue...
Use another Odin version and will work.
I used the one included in the EZbase package.

- Disconnect phone from computer.
- remove battery, leave it for two minutes.
- Open task manager, kill the Kies process if its running in the back ground
- open odin 1.3, check repartition, select files
- go to download mode, connect phone and start flashing
you should be fine, don't be in a hurry

The first time I experienced exactly the same I got pretty mad...but patience made it for me in the long run
Sent from my GT-I9000 using XDA App

Experienced the same here. You have to kill any "kies" processes on your pc by taskmanager!!!
No need to pull battery! Just press on/off button long enough and then re-enter download mode and reconnect via usb.
Worked here with odin 3 v1.82 pit file and repartition checked.

Uhh, I realize it might be considered an old thread, that should not be resurrected.. but what "fixed" it for me is running Odin as an Admin.

Was flashing from custom ROM to the stock 2.3.5 and got the same Set Partition issue. Solution was like said above: disconnet usb, pull out battery for two minutes and flash again.

Useful thread. Kies was the culprit in my case!

If you don't use kies just uninstall it and use only the usb drivers http://forum.xda-developers.com/showthread.php?t=728929

Thank you
I did this...
disconnect usb
reboot the phone
restart odin
...then tried it again with all 3 boxes checked again and it worked.

ykk_five said:
i try the followings usually (not in sequence)
disconnect usb
reboot the phone
restart odin
Click to expand...
Click to collapse
Works great for me. Thanks alot!

[Help needed] Odin don't detect S5830i.

Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?

tamburyniarz said:
Hello,
I bought s5830i and i did'n know about this 'i' so I try to install CMW5 for S5830 without 'i' and now when i'm trying turn on phone hanging on boot screen. Before I installed cmw5 i don't turn on "debbuging usb" option. And now when I want install branding soft via Odin it don't see my phone. I of course tunr on "download mode" using 'volume down'+'volume up'+'power' combination. What can i do whit this problem? I tried changing ports and computers. I think that problems is not chacked "debugging usb" but I dont know how i can check it now?
Click to expand...
Click to collapse
Hello. Sorry for my english. You can try this guide http://forum.xda-developers.com/showthread.php?t=1551156
Sure you need Samsung Usb Driver or install Kies in your pc (kies installs drivers too).
good luck.

Now, odin see my device. I unistalled all drivers and whole Kies, and installed agan. But now I've another problem. When I trying flash Oden failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using "Odin3_v1.84", PIT file : "cooperve_0623.pit" and ROM: "S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5" from samfirmware.com
I don't know what i'm doing wrong. I wanted add picture but i can't - I don't have 10 posts...

I used this ODIN 1.87 is preconfigured for 5830i you dont have to configure, only select files. The .pit file i used is include. http://forum.xda-developers.com/attachment.php?attachmentid=1058320&d=1336911330
1st. Turn on phone in download mode.
2nd. Press volumen up in phone to continue.
3rd. Plug usb in pc
4rd Open Odin.
Sorry for my english, good luck

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now it's this. Maybe other soft,but I dont know which one?
@edit
One more question: If i have one-file om i put it in PDA box?

To FirmWare Work in ODIN, is needed split file in parts, The ODIN only flashes BOOT PHONE PDA and CSC parts!
Docky73 builded one utility for CygWin and linux split the file in parts.http://forum.xda-developers.com/showthread.php?t=1611225

I'm do it! It's weird, but I only used other usb cable. When I do it all was fin. Thankfor helping. It was very helpfull.

Still not working
I have try the above method and i m still unable to flash this galaxy ace s5830i.
find attached the screenshoot that i took.
really need help to update this phone
thank in advance

Have you closed kies. . If kies running background your flashing will never get success. .May be silly but check once
Sent from galaxy ace running S3 beta 3.1 evolution

Kies is not installed I have remove it to prevent this issue
Sent from my GT-N7000 using xda app-developers app

[Q] Problems with Odin, need help.

Hi everyone, sorry if this is the wrong place for this post, mods pls move it to the right forum.
I have a non-rooted, non-operator free Samsung Galaxy Note with Gingerbread and I want to root it, set it operator free and flash ICS.
I tried to flash a ROM via Odin (N7000XXLPY_N7000OXALPY_DBT), followed the steps (open Odin, select the md5 file @ PDA, startup the phone on download mode, connect the phone to pc, now Odin recognizes it and shows the yellow case, then I press start) but at a certain point it just stops working and I dunno what to do, its frustrating...
Here's the Odin's Console log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
It just stops at this point and don't do nothing... What can I do?

kelomancer said:
Hi everyone, sorry if this is the wrong place for this post, mods pls move it to the right forum.
I have a non-rooted, non-operator free Samsung Galaxy Note with Gingerbread and I want to root it, set it operator free and flash ICS.
I tried to flash a ROM via Odin (N7000XXLPY_N7000OXALPY_DBT), followed the steps (open Odin, select the md5 file @ PDA, startup the phone on download mode, connect the phone to pc, now Odin recognizes it and shows the yellow case, then I press start) but at a certain point it just stops working and I dunno what to do, its frustrating...
Here's the Odin's Console log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
It just stops at this point and don't do nothing... What can I do?
Click to expand...
Click to collapse
Usually ODIN takes a lil long to flash a rom.So give it a good 10mins time and see it comoletes the installation....
Or you may use the new ODIN by grgsiocl.It shows the remaining time left to finish flashing.Its there in themes and apps section.
Sent from my GT-N7000 using xda app-developers app

sometimes 30 or more minutes.
Usually it stops there either thought corrupt download of rom, redownload it try again.
Or because you have bricked it "op op" emmc "style" way.
If you did not root phone, or put different kernels on, then dont do anything and contact entropy, he is looking for a case where without this the phone was superbricked.
Sent from my GT-N7000 using Tapatalk 2

You may not have all the drivers from Samsung? Download Kies, run it. Then turn off Kies, antivirus and firewall. Commissioning Odin as administrator.

Wait for atleast 20 mins approx to get the stage completed or throw out to samsung service center to get it done.
Swyped From My Juicy Flavoured AOKP JB.

[Fixed] First time rooting, accidentally flashed wrong ROM what to do from this point

EDIT: Rebooted my computer and phone and it flashed fine. Thank you for all the help. I'm off to explore the world of custom roms.
Finally decided to root my phone and install CM9 from GB 2.3.6 with the LA4 Kernel. Downloaded everything I needed as per Post 3 of this thread. Accidentally flashed the newer kernel instead of the pre rooted ROM.
Realizing my mistake, I tried flashing the correct ROM and PC Odin gives me a failure. The phone won't boot, it just stays stuck on the Galaxy Note N7000 Logo with an exclamation mark at the bottom.

Check if you have cwm (power+home +volume up) If so then flash this get the standard version, then go advanced options and reboot recovery...
After that do all wipes data/cache/Dalvik cache then flash the cm9 for n7000,then flash cm9 GApps then reboot...
After the system boots to android set it up and download triangle away and use it to get rid of the yellow triangle
If you don't have cwm then download a stock GB rom and flash it via odin... Start from scratch
Cheers
Tapatalking on my GT-N7000

what is the error pc odin giving you?

Don't quite remember anymore since it was from this morning. All I recall is the little box on the top left going red.
Could I try replicating the problem or do I risk damaging my phone?

odin won't damage the phone. As above poster said check if you have cwm, else use Odin again

nokiamodeln91 said:
odin won't damage the phone. As above poster said check if you have cwm, else use Odin again
Click to expand...
Click to collapse
No, I don't have CWM so I've been downloading a stock rom since I saw that post should take an hour with glorious third world internet. In the meantime should I fish out that error message you requested or is it not worth it at this point?

If you need all data back and everything to be working I would recommend you to flash back the same ROM you had earlier using odin.
Go back to Square 1.
Then root it from Dr Ketan's post.

as you downloading the rom. you are going to use Odin again. Let know the error

Yeap, another fail while using PCOdin.
Going to install samsung USB drivers from the file in this thread and get rid of Kies.
Here's the stuff from the little window.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/007> Added!!
Edit: Tried again after reinstalling drivers. Still no go.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

great

Samsung galaxy Note GT-N7000 bricked. Need HELP!!

The phone shows " Firmware upgrade issue encountered an issue. Please select recovery mode in Kies & try again". I cant go to recovery mode ie. vol up+home+power. THings I have tried:
1. with Kies the device isnt recognised. I have updated the driver as well.
2. with odin every thing fails... flashing "all samsung recovery.tar", flashing stock jelly bean, flashing .pit file
I have googled for days and tried many things but isnt working. Need help

Where and why the stock firmware flashing is going wrong?

nokiamodeln91 said:
Where and why the stock firmware flashing is going wrong?
Click to expand...
Click to collapse
Hello,
Now the odin is not even recognising the device, Before it couldnt perforn the NAND write.

Start fresh... Remove battery and let the phone rest for couple of minutes.. Then try again.. Just go ahead and flash a stock rom. And check where it fails.

nokiamodeln91 said:
Start fresh... Remove battery and let the phone rest for couple of minutes.. Then try again.. Just go ahead and flash a stock rom. And check where it fails.
Click to expand...
Click to collapse
I had done what you've suggested. It dint work. The message in the odin3 v3.04 when trying to flash stock jellybean was
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

loveandroider said:
I had done what you've suggested. It dint work. The message in the odin3 v3.04 when trying to flash stock jellybean was
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Where did you download this file from? SAMmobile?
Try redownloading the file, it may be corrupted during download.

AutumQueen92 said:
Where did you download this file from? SAMmobile?
Try redownloading the file, it may be corrupted during download.
Click to expand...
Click to collapse
Hello. I can say that the file isnt corrupt because I have flash that ROM a numerous time before. But until the last time when I was flashing custom rom night owl lollypop version, it stuck in boot loop and then when I tried to flash that , it dint work. Now I cant even go to recovery mode.

loveandroider said:
Hello. I can say that the file isnt corrupt because I have flash that ROM a numerous time before. But until the last time when I was flashing custom rom night owl lollypop version, it stuck in boot loop and then when I tried to flash that , it dint work. Now I cant even go to recovery mode.
Click to expand...
Click to collapse
As the log say "<ID:0/003> SetupConnection.." and not move ahead.. there is some connection problem with Phone and PC... Could be a driver problem.. or Kies might be running in the background...
There is no writing of data what so ever.

I tried in another laptop and it worked. My mobile was dead for weeks and its back to life. But I had samsung driver. I dint have Kies installed. dont know was the problem in connection. Anyways thanks to nokiamodeln91 and AutumQueen92 :good: