Related
I forgot to put the DIAMING.nbh file on my diamond! now it just shows up with "Touch Diamond" and then resets! i need help please
is this an easy fix??
Thank you so much!
go to bootloader (vol down + reset) and flash new rom from romupdater in windows
i got to bootloader but it won't read my usb... there is no DIAMING.nhb file (or whatever it is called) on my phone.. is there any application that will let me get the usb to work.. any ideas???
thank you
i can still run the custom RUU, and it runs on my phone as well.. so is there anyway.. or is there already one out there that has the DIAMIMG.nbh with it so that it installs without the need to manually move the file to the phone..
thanks again
Yes it does, if u get into bootloader, connect your phone to PC, you should see written USB in bootloader a then run RUU from windows, it should work. I experienced similar problem and that was my solution
i tried to flash a different rom onto my diamond, and it got 100% done.. but still... i wasn't able to move the DIAMIMG.nbh file to my root... do i need to use a rom that doesn't have a DIAMIMG.nbh file? where would i find one.. if i may ask?
your help is appreciated thank you
UPDATE
ok... so i found, and downloaded 2 RUU roms. one of them got to 90% done, and the other got to 91% done... does anyone know why this is..? these are the official roms, (I think).
i have searched for the past 2 days almost nonstop, i need a rom that will fully install onto my phone. This rom can't have me move the DIAMIMG.nbh file over manually either, because i cannot do this in bootloader mode.
i tried these 2 official roms. _HTC Touch Diamond_QMR_RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
and this one,
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Diamond_52.26.25.09_0.93.25.26_Ship.exe
do you know where i could download some other roms at? thanks
did you use Hard-SPL? maybe something with spl theres wrong
When flashing from your PC, you don't move an NBH over.
Go to htc.com, support, and download the current rom for your phone.
Soft reset holding volume down
Connect to your PC (DIRECTLY and NOT through a hub)
Run the updater you just downloaded from HTC
ya. i'm using hard-spl..
i tried getting a rom from htc, but i don't think that it's recognizing my s/n.. could i borrow someone elses??
i'm connecting my phone to a USB that's located in the back of my computer... i don't think it's a hub, but i'll try a different port maybe..
thank you again
so here's the full story.
i tried to install a rom.. it was shaks v3. and this was the rom. -> 2.03.401.2
i didn't put the diamimg.nbh file on it before i flashed it.
the RUU ran fine, but afterwards it was stuck just saying "touch diamond" , and it was resetting itself constantly.
i got into bootloader mode, and noticed that i could not transfer files from my computer to phone through that..
so i downloaded a rom that didn't require you to move the .nbh file over manually. it got to 90% , and then stopped i tried another, and it got to 91% and stopped, i tried another, it got to 89% and stopped, and i tried one more that got to 19% and stopped. i have tried using these RUU's on different computer's to install also..
IS there any way to move files using the bootloader mode? i know that the computer recognizes it, but not as a device with removable storage..
I'm starting to lose hope with my phone, and any help will be greatly appreciated
i don't know if it makes a difference, but i got my phone from Sprint.
ok!!! i totally just remembered that roms were made for CDMA users (Sprint verizon vodafone... ME) and GSM users... i was trying to flash a GSM rom onto my phone...
make sure that you know what type of rom to flash.. there are CDMA roms out there.. you just have to search...
thank you Felipe404, for your quick replies, and you made this easier for me.
thanks to JonInAtl for the precise reply...
both of your guy's help made a huge difference, that you don't even know.
WHOA!!!!!!
yea, i did the same thing,.. flashed my gsm diamond with cdma rom, after flash it just showed the bootscreen - Touch Diamond and there it stopped... so i got to the bootloader, connected the device to pc and flashed another rom from computer.. and it did work
no problem mayne
Just to clarify here, the ONLY reason to copy DIAMIMG.nbh to your device is if you do not want to update with the RUU. You can install every ROM using the RUU regardless of who made it.
That said, every time I want to update, I do have to copy it over to my phone as the USB port on it no longer works (it still charges, just says unknown device regardless of the ROM).
Hi everyone,
I've got a HTC Touch HD from Telstra, been using it for a long time. Recently the USB has stopped working correctly. I can charge it fine but can't get it to connection in Activesync mode or as USB Storage.
I have ruled it to be the phone:
Tried two PCs, even the PS3 doesn't detect anything is connected (Just shows phone is charging)
Tried XP, Vista and Windows 7 (fresh installed).
I have hard reset the phone many times.
It is under warranty, I have flashed Dutty's Extreme rom onto it and want to simply put a stock rom on it (preferrably Telstra) so I can send it away - or see if that fixes it.
I can't install any unsigned roms as I need USPL (via USB), I can't install signed roms as if I put them on there I get '00028002 Not Allow'
Where can I got next? I can still put BLACIMG.bbh files on the storage card but can't get any to flash.
It has SPL 1.54 and Radio 1.14.25.24.
I really want to flash it with: Duttys HD WM6.5 R7.
Thanks.
MattJ1989 said:
Hi everyone,
I've got a HTC Touch HD from Telstra, been using it for a long time. Recently the USB has stopped working correctly. I can charge it fine but can't get it to connection in Activesync mode or as USB Storage.
I have ruled it to be the phone:
Tried two PCs, even the PS3 doesn't detect anything is connected (Just shows phone is charging)
Tried XP, Vista and Windows 7 (fresh installed).
I have hard reset the phone many times.
It is under warranty, I have flashed Dutty's Extreme rom onto it and want to simply put a stock rom on it (preferrably Telstra) so I can send it away - or see if that fixes it.
I can't install any unsigned roms as I need USPL (via USB), I can't install signed roms as if I put them on there I get '00028002 Not Allow'
Where can I got next? I can still put BLACIMG.bbh files on the storage card but can't get any to flash.
It has SPL 1.54 and Radio 1.14.25.24.
I really want to flash it with: Duttys HD WM6.5 R7.
Thanks.
Click to expand...
Click to collapse
Previously you could flash cooked roms, but now you are unable to flash any, correct?
When in bootloader does it still change from 'serial' to 'usb'? Have you tried another usb cable?
Yes I could flash cooked roms, only by using USPL.
In bootloader when I have the cable plugged in it is blank where it should say USB, I take it out and it says 'Serial'
I have also tried the cable from my old Touch Diamond (which both cables work fine with the Diamond).
MattJ1989 said:
Yes I could flash cooked roms, only by using USPL.
In bootloader when I have the cable plugged in it is blank where it should say USB, I take it out and it says 'Serial'
I have also tried the cable from my old Touch Diamond (which both cables work fine with the Diamond).
Click to expand...
Click to collapse
What happens when you try and run either USPL or HSPL?
On the computer? It can't detect USB. Both computers don't even get to the stage where it installs drivers.
The PS3 would even say 'Unknown USB Device Connection' but it doesn't. I just get power through USB to charge it, that is it.
Is there a rom I can flash to my phone via the storage card in the state it is in?
MattJ1989 said:
On the computer? It can't detect USB. Both computers don't even get to the stage where it installs drivers.
The PS3 would even say 'Unknown USB Device Connection' but it doesn't. I just get power through USB to charge it, that is it.
Is there a rom I can flash to my phone via the storage card in the state it is in?
Click to expand...
Click to collapse
Unfortunately you cannot flash through storage card unless you have USPL on device.
Sad face. lol.
Can I get USPL or HSPL on through the Storage card... wishful thinking here.
Can I send it to HTC and pay for it to be repaired? Will they even touch it being a modified phone? Maybe I'll just send it through Telstra and see what happens.
MattJ1989 said:
Sad face. lol.
Can I get USPL or HSPL on through the Storage card... wishful thinking here.
Can I send it to HTC and pay for it to be repaired? Will they even touch it being a modified phone? Maybe I'll just send it through Telstra and see what happens.
Click to expand...
Click to collapse
USPL & HSPL both require usb to be installed and cannot be installed through SD card as phone needs to be in bootloader.
You could send phone to be repaired but I'm sure the cost would be high and going down warranty route wouldn't work either as you've voided warranty already by using cooked rom.
Have you followed correct guide for installing drivers?
maybe it's something as silly as "Enable Faster Data Transfer" under USB to PC settings :/ just had problems connecting mine until i unticked it, even though i never turned it on or off, seems to work sometimes, other times not :/
MattJ1989 said:
Sad face. lol.
Can I get USPL or HSPL on through the Storage card... wishful thinking here.
Can I send it to HTC and pay for it to be repaired? Will they even touch it being a modified phone? Maybe I'll just send it through Telstra and see what happens.
Click to expand...
Click to collapse
Here is your only choice though.
After upgrading to new ROM, try it again whether it can connect to pc or not?
Connect your SD card to PC through microSD card. Copy all files from your SDcard to new folder in your PC. Then, right click on the microSDcard disk-->full Format by FAT32 (this step is very important).
After formatting SDcard, copy back all files to SDcard . Rename .nbh to BLACIMG.nbh (for Blacktone) and copy it to SDcard.
Insert your SDcard back to Touch HD. Turn off your device by Power button.
Go to Boot loader mode. Push and hold Vol. Down + press Power button.
After that your device with have a white screen with text " Press to power button for continue upgrade" press power button and it will start upgrade Rom.
You can check this video for more practical actions on youtube.(this video for HTC diamond2 but it's almost the same with Blacktone just different in rename step)
Hope it helps and cheer
But that's the thing I can't get any rom to work through the BLACIMg.nbh storage method
I think I'm either going to have to stick with the current rom, have no usb transfer.
Or pay up to repair it
EDIT: I already tried the "Enable Faster Data Transfer" and that didn't help Thanks.
MattJ1989 said:
But that's the thing I can't get any rom to work through the BLACIMg.nbh storage method
I think I'm either going to have to stick with the current rom, have no usb transfer.
Or pay up to repair it
EDIT: I already tried the "Enable Faster Data Transfer" and that didn't help Thanks.
Click to expand...
Click to collapse
Where is your MicroSD card ? Connect your SD card to your PC via MicroSD card.
Right,
you don't need anything installed on your phone to run uspl.
Put blacimg.nbh on your sd card with a card reader.
Now with the card still unplugged put your phone into bootloader mode.
Now connect it to your computer, does serial change to usb??
Now insert your storage card.
Now run crackwhores USPL GUI and fingers crossed it should start flashing.
If that doesn't work let us know!
Also, what cable are you using, the one that came with the phone or a normal usb one??
Cheers,
Jake
No usb connection
So if i don´t get the usb connection in tri-color mode i´m in big trouble right?
I got the same problem
Mine is only saying serial on three diffrent computors... this is not good, i went to buy my self a new phone.
If i were you i would try 2 things.
There was a temporary spl which you would run from inside the OS and then that would give you access to either uspl or hspl.
If that wouldnt work, i would buy a usb replacement kit from ebay and install it myself tbh.
In the same situation
I too, tried everything under the sun for my Telstra HD but cannot get the USB connection to work before. Here's my short thread. I'm pretty sure there isn't anything that can be done flashing wise through the SD card because of our SPL 1.54.0000.
After a week of stuck in this situation I was going to take my phone to a shop and have the usb port replaced. I'm sure it will cost an arm.
In terms of replacing the port myself, has anyone tried? Is it tough to do? I thought soldering skills were involved.
supadupa111 said:
I too, tried everything under the sun for my Telstra HD but cannot get the USB connection to work before. Here's my short thread. I'm pretty sure there isn't anything that can be done flashing wise through the SD card because of our SPL 1.54.0000.
After a week of stuck in this situation I was going to take my phone to a shop and have the usb port replaced. I'm sure it will cost an arm.
In terms of replacing the port myself, has anyone tried? Is it tough to do? I thought soldering skills were involved.
Click to expand...
Click to collapse
Once you open up device warranty is voided permanently. If you paid for a replacement usb port and something else happened you could still return under warranty, but once opened option of warranty is forever closed!
As of now, its the only route because the lack of original spl has already voided my warrenty... =(
Ha. Today must be my lucky day!
I was a breath away from spending $75 to have my HD ripped apart to replace the usb port yesterday. But all of a sudden the port once again works and is recognized in bootloader mode.
All I did was hard reset once, used as normal, and plugged in via usb to charge with power on (just to see if it might work this 187429th time) and the usb menu (activesync, disk drive...) came up. I retried. It didn't work (just as I thought). Went to bootloader and it also didn't work. Restarted, usb menu was up again. Rebooted bootloader a few times and suddenly usb came on.
I will proceed to flash hspl 1.56 immediately.
To the dudes that still can't connect: DON'T GIVE UP YET, KEEP TRYING!
Hello,
I know you guys got some excellent walkthroughs, roms, programs and threads where you've helped a lot of people out but I could really use some personal feedback. I had hoped to fix my phone using one of the excisting threads but unfortunalty I can't get it to work with those.
My problem is one I've seen more of in here, I used the SE updater and it froze at 53%, I did what the program said, reconnected and it froze again at 12%, and again, again, etc. So I disconnected thinking it might be a bad USB port. But then the updater didn't recognise my phone at all. So I used the mtty program suggested in some of the threads and I got past the red/green/blue screen but now it's stuck at the Sony Ericson logo, as if WM6.1 is gone.
This is what the red/green/blue screen currently states:
KOV110
SPL-0.78.0000
MicroP1-787
MicroP2-707
From what I gather this means I can't flash roms, right? I tried making it a hard-spl but when I use the tool it says it can't connect.
So is there anyway to get a rom on it and bring it back to life?
Thanks inadvance!
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
meska said:
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
Click to expand...
Click to collapse
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Ronnet said:
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Click to expand...
Click to collapse
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
original roms will still work with original spl... but nevermind =P
laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
My phone can still power on in the sense that it shows the Sony Ericson logo or that I can access the three collor screen. But it won't launch WM6.1. I also have a problem with updating to hard DSL. It does recognise my phone because without it connected the program finds nothing and with the phone connected it wants to start updating. It says ''updating from image version: (emply) to image version: 1.00.X1 Ipress next and it opens a progress bar on both my X1 and the PC. But it never goes beyond 0% and then gives me an connection error. I think it has something to do with not being able to get passed the Sony Ericson logo. I mean the hard-DSL program does recognise my mobile but activeSync is never active because my PC doesn't recognise a WinMobile phone (since it wont go past the Sony Ericson screen)
meska said:
original roms will still work with original spl... but nevermind =P
Click to expand...
Click to collapse
Really? That might fix my device then. Could you suggest a rom from the long list? Perhaps one that works on all versions? Because I'm dutch but my mobile has always been in english so I'm not sure what rom version I had. Except that it was identified as an R2 Rom by the Sony updater before it killed my X1...
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
I'm now downloading the initial dutch R1 firmwire, could that one work?
Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
Alright so I got an R1 original rom (I now realize that the R3's were originals aswell) and it worked! I'm not sure if it was the different rom or the formatting with FAT32 that did but it works again. So I'd like to thank everyone who was kind enough to reply.
The device is incredibly slow now but now I can use the hard-DSL installer, right? DOes anyone have a suggestion for a good rom to use?
laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
DON'T hard-spl if you're going to flash a stock ROM. And especially if you're going to use SEUS.
Try flashing the R3A first. The R1s are way slow, as you've seen.
Hello,
I'm having issue synchronizing my Xperia X1 with my PC using ActiveSync or WMDC.
Powering my battery works but sync doesn't. I tried 2 other USB cables and same problem occur.
I tried different PC but still I have same problem. I event went back to original Stock and this doesn't helps also.
Should I send my device for fix? I have warranty? I can reverse to original Stock and put back original boot loader.
Hopefully they will fix it but if they don't I cannot add custom ROM any more
You can go and get a card reader to have your sd mini read in the pc, I got mine with 5 EUR and it also supports several type of cards. Also keep in mind that read/write speed is faster with a card reader than plugging your device in Disk Drive mode and this can be convenient sometimes
Good luck with the repair. If you revert to stock SPL and to stock rom and if your time of warranty is not up then you should have no problems, although in my country the service center sucks, they try to make you pay as much as possible...
I manage to resolve this issue. I revers back to my stock ROM 6.1 and still I cannot sync. Then I put back radio 1.10.25.18 and it START TO WORK !!!! I can sync now without any problem and it works now with 6.5 ROM and different radio.
This was last step before I want to return it to SonyEricsson service.
Usb problem
Hello,
I'm having issue synchronizing my Xperia X1 with my PC using ActiveSync or WMDC.
Powering my battery works but sync doesn't. I tried 2 other USB cables and same problem occur.
I tried different PC but still I have same problem. I event went back to original Stock and this doesn't helps also.
usb probem
how to update the radio 1.10.25.85 on xperia x1 by the micro sd card? since the usb is not working? thanks!
same as you update your ROM, just rename radio file to KOVSIMG.nbh and update it. Hope this will work for you also.
yes I do this procedure [KOVSimg.nbh] but gets caught in tla loading. WHAT do I do now .thanks!
there is no difference in flashing ROM and Radio, can you maybe check that you do all proceudre correctly? maybe you should download Radio from some other place, maybe is broken
i have the same problem...the battery is recharging but it cannot sync...maybe it has something to do with the version of windows...i was using windows vista and windows mobile device center and it synced and all was ok...but now i have windows 7 ultimate x64 and even though i downloaded the mobile device center it does not recognise the phone when i plug it in activesync mode....it still works perfectly in USB drive mode....but i cannot flash a new rom through the usb method now...recently tried it on a friends pc with windows xp and activesync and worked just fine...any thoughts on that??..
ok. I tried everything. [xperia x1] is not reconhesido by [usb].
neither the radio rom can be clicked. [already downloaded several saiter]. it hangs in louding
I've the same problem occured before but I'm not sure if it's as simple as mine.
All I did was disable "Faster Transfer" under Active Sync radio Button in USB 2 PC (Control Panel), hope it's helpful.
Ok, I'd try this, but I have two questions:
1) can any body give the link to the old Radio rom?
2) I already have a 828x rom installed. is that compatible with the old rom?
life owner said:
Ok, I'd try this, but I have two questions:
1) can any body give the link to the old Radio rom?
2) I already have a 828x rom installed. is that compatible with the old rom?
Click to expand...
Click to collapse
hm, OT post
1) radio selection, don't forget to install a matching rilphone.dll
2) afaik those two (meaning radio rom and normal rom) are not related like that, radios should work in all versions on all roms
it might be, that you suffer less functionality/signal strength when using an older radio version, but that is regionally different and cannot be generalized
hope you find your ideal combo
Best, DK
Need some help in getting a stock rom to work and flashing a custom rom once thats' fixed.
I decided to go back to a basic HD2 and reload my custom rom on a fresh system. I downloaded and installed a stock rom, went to install my custom rom (Elegancia v2) and a couple things happened. First the flash failed with an error that there was a communication problem, though I could see the device on Active Sync. Now it's stuck at the white HTC page when I turn it on so something is wrong with the stock rom is some way to prevent it from booting through. It did that yesterday but not today. All I"ve done is continue to try to flash the custom rom and fail.
A magic bullet would be nice here.
Ok sense you posted this in the T-Mobile Development section I assume you have a TMOUS HD2 and I also am going to assume you got your stock ROM via the official T-Mobile HTC HD2 upgrade. You can try to reflash the ROM by manually putting your HD2 into bootloader (muticolor screen). Turn your HD2 off and then turn it back on but hold down the volume down button as it is booting it will bring up bootloader. Connect your HD2 via USB cable to your computer and wait until the Serial in the white bar of bootloader changes to USB and your computer regonizes your HD2 (this should happen simultaneously). Right click on the update utility and click on run as adminastrator.
But if you keep getting the communication error you can try flashing via a SD card. You will need a SD card formated Fat 32 it is recommended to use a smaller GB card but if you format your 16GB SD card it should work. Make sure you make a back up copy of your SD card on your computer before you reformat it. To learn more abput how to do this go to this thread. It can tell you all you need to know to flash via SD card. Also when you rename the Ruu_signed.nbh file it is not case sensative so you can name it LEOIMG.nbh or leoimg.nbh it does not matter. Be advised though no matter wich method you use to flash you will have to reflash HSPL to your HD2 before you can flash your custom ROM.
T-Macgnolia said:
Ok sense you posted this in the T-Mobile Development section I assume you have a TMOUS HD2 and I also am going to assume you got your stock ROM via the official T-Mobile HTC HD2 upgrade. You can try to reflash the ROM by manually putting your HD2 into bootloader (muticolor screen). Turn your HD2 off and then turn it back on but hold down the volume down button as it is booting it will bring up bootloader. Connect your HD2 via USB cable to your computer and wait until the Serial in the white bar of bootloader changes to USB and your computer regonizes your HD2 (this should happen simultaneously). Right click on the update utility and click on run as adminastrator.
But if you keep getting the communication error you can try flashing via a SD card. You will need a SD card formated Fat 32 it is recommended to use a smaller GB card but if you format your 16GB SD card it should work. Make sure you make a back up copy of your SD card on your computer before you reformat it. To learn more abput how to do this go to this thread. It can tell you all you need to know to flash via SD card. Also when you rename the Ruu_signed.nbh file it is not case sensative so you can name it LEOIMG.nbh or leoimg.nbh it does not matter. Be advised though no matter wich method you use to flash you will have to reflash HSPL to your HD2 before you can flash your custom ROM.
Click to expand...
Click to collapse
Tried that and no joy. I can get to the bootloader and see USB at the bottom of the screen but it won't go beyond that. Such is life. I worked it out with TMobil to exchange the phone with no penalty (hopefully that sticks0 but I'd still like to get my old one working. Not idea how I got stuck on the white page nor why this is happening at all but I want to try to prevent it in the future.
rogerperk said:
Tried that and no joy. I can get to the bootloader and see USB at the bottom of the screen but it won't go beyond that. Such is life. I worked it out with TMobil to exchange the phone with no penalty (hopefully that sticks0 but I'd still like to get my old one working. Not idea how I got stuck on the white page nor why this is happening at all but I want to try to prevent it in the future.
Click to expand...
Click to collapse
Hmmmm when you have your HD2 plugged into the computer while in bootloader and it says USB in the white bar of bootloader. Go down to the bottom right of your task bar and click on the little icon to safely remove a device. See if it lists your phone as "HTC USB Sync". If it does not list it as this you need to either try another USB port or update your USB drivers. Try updating the drivers while your HD2 is connected to your computer and in bootloader.
rogerperk said:
Tried that and no joy. I can get to the bootloader and see USB at the bottom of the screen but it won't go beyond that. Such is life. I worked it out with TMobil to exchange the phone with no penalty (hopefully that sticks0 but I'd still like to get my old one working. Not idea how I got stuck on the white page nor why this is happening at all but I want to try to prevent it in the future.
Click to expand...
Click to collapse
I had the same problem. I was in the bootloader screen with USB showing at the bottom. But when I tried to flash something I'd get a connection error. I just unplugged the usb from my pc and plugged it into a different usb slot, and walaa it started installing the htc drivers. Also in active sync, check the connection settings and make sure allow usb connections is checked.
Thank you for sharing, like very much