Database Develop

xperia upgrading problem

hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx

najaf363 said:
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
Click to expand...
Click to collapse
did you do this (prefereble on an XP machine)
Phone Synced with PC
run X1_HardSPL.exe
follow on screen instruction, including after getting the drivers installed on you xp or vista machine installed, so the hardSPL will make the phone in bootloader and make sure it says 100% done on you xperia. and XP VISTA
then put inte bootloader holding down volyme button and power until tricolor screen is shown, and make sure that the imgage.nbh file is named correctly.
'
then it should work.
the most common failure is that the hardspl isnt installed correctly.

najaf363 said:
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
Click to expand...
Click to collapse
DO NOT I REPEAT
DO NOT
use the hardspl custom RUU for flashing roms.
this is from the 1st post of the HARDSPL thread.
http://forum.xda-developers.com/showthread.php?t=431218
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Click to expand...
Click to collapse
IF you have finished hard-spl properly it should say 0.72.Olinex, I'd suggest doing hardspl all over again

thanx bro for replying...during hard spl process it never asked for any drivers, i will try this on xo machine and see what happens,
and i dont understand about customs roms, jack's rom is a custom rom right? so which hard spl file do i need ?

najaf363 said:
thanx bro for replying...during hard spl process it never asked for any drivers, i will try this on xo machine and see what happens,
and i dont understand about customs roms, jack's rom is a custom rom right? so which hard spl file do i need ?
Click to expand...
Click to collapse
do the SD WAY, but remember to rename xxxxx.nbh to kovskimg....nbh otherwise it wont load it, se sticky post here in ropm section.
the driver issue is for XP AND VISTA when still in tricolor screen thn vista will install driver needed for hardspl to work (to recognise the device), as i stated the most common is that the hardspl isnt correctly installed.
hope you got it bro..

It sounds like you're getting confused between RUU and NBH
Ruu is the process for upgrading your phone with a new rom.
RUU stands for
Rom
Upgrade
Utility
nbh is the actual rom
there's only one Hard SPL available in the hardspl thread.
Run that again and let it complete, it should work from booloader mode on your phone.
when that is finished and your device in bootloader says 0.72.olipro then you can flash a rom.
If you use the SD Card method the whatever ROM file you choose must be called KOVSimg.nbh and be in the main section (root) of the SD card.
If you want to flash from desktop take the SD card out first.
Download the RUU I linked to in my last post. Extract that and make sure the nbh rom is called RUU_signed.nbh put it inthe ruu folder then start the RUU process.

smaberg said:
do the SD WAY, but remember to rename xxxxx.nbh to kovskimg....nbh otherwise it wont load it, se sticky post here in ropm section.
the driver issue is for XP AND VISTA when still in tricolor screen thn vista will install driver needed for hardspl to work (to recognise the device), as i stated the most common is that the hardspl isnt correctly installed.
hope you got it bro..
Click to expand...
Click to collapse
one too many ks in kovsimg there mate.

thanx guys for replies. i have managed to install the drivers and then i run the hardspl and now its showing :
KOVS110
SPL-0.72.0LINEX
MICROP1-787
MICROP2-707
now i hope it should upgrade it.before doing somthing i want to know after upgrading to jack's rom, the XPERIA logo that comes when starting the device will keep on showing right? the new rom will not remove it?
thanx

najaf363 said:
thanx guys for replies. i have managed to install the drivers and then i run the hardspl and now its showing :
KOVS110
SPL-0.72.0LINEX
MICROP1-787
MICROP2-707
now i hope it should upgrade it.before doing somthing i want to know after upgrading to jack's rom, the XPERIA logo that comes when starting the device will keep on showing right? the new rom will not remove it?
thanx
Click to expand...
Click to collapse
you have windows vista or xp ???
i cant solve this problem with xp

malik bro i have vista, what i did is i connected my device to pc, and without running the hardspl i restarted in bootloader mode (while connected) it automatically installed the drivers when it was in bootloader mode...
after that i restarted my device then i did the hardspl
and now i finished upgrading to jack's rom..job done.!!
now i have 2 problems.
first the panel is gone...how to install it?
2nd the xperia logo what comes in start is also gone...how to install it bcz i need it very much.
thanx

najaf363 said:
now i have 2 problems.
first the panel is gone...how to install it?
2nd the xperia logo what comes in start is also gone...how to install it bcz i need it very much.
thanx
Click to expand...
Click to collapse
read #2 post @ jack's ROM thread
Some cabs and extra files you may need.
1. X1 Panel package to add panel back (divided into sub cabs)
extract the .rar file then it'll show you the panels cab
install Jack Sony X1 Panel Main.cab first then u can install other panels
sorry cant help you with the xperia logo

ok i want to get back to my stock rom..is there anyway to do that?

how to remove this rom so i can install the orignal rom, by connecting with SE software update utility?
this rom is fast stable but its not only me how use this device.so others dont like the way programs and startmenu are showing.

Usb-driver
I have the same problem when trying to flash with XP. I have tried two different computers but have the same problem. It seems that there is some usb-drivers missing. One time i got an error in XP when rebooting the X1 that the usb-device not working correct.
Can not flash by computer
Can not flash using card
The problem occurs when trying to install ROM
Result: When running RUU. Reboot= OK, Tricolour =OK, Process freeze after "loading" apperas (when *.nbh is supposed to start loading.) SPL never finish.
Anoyone knows which driver i need?

don't forget to disable any firewalls and possibly antivirus... This was the problem for me when using Hardspl and Zonealarm suite... So switched off Zonealarm and Hardspl just worked.... [oh and any windows firewalls]

Will try again tonight without FW and antivirus...
However... i have successfully upgraded ROM using SE Update software earlier... The USB worked fine at that time.

najaf363 said:
ok i want to get back to my stock rom..is there anyway to do that?
Click to expand...
Click to collapse
Yes. Just download the generic ROM from the ROM thread and follow the exact same steps as for a custom ROM. Also, look for answers yourself before asking questions that have answers stickied
Spiff76, SE update uses a different way to access your phone. hardSPL can be considered a "hack", which is why antivirus etc. might detect it.

Hmmm... turned of FW and antivirus but same result. RUU freezes after reboot and tricolour. When phone is supposed to start loading new ROM it just freezes and i get a connection-error message.
I believe it has to do with the usb-connection but i can not figure out how to solve it. Have also tried ti install via card without any luck. Same problem remain... i can not get the SPL to finish.
Have any one experienced similar problem and how was it solved. It can not be a biggie but it is really ***.
As said, running this on XP. USB works fine with active sync and in usb to PC-mode.

Spiff76 said:
Hmmm... turned of FW and antivirus but same result. RUU freezes after reboot and tricolour. When phone is supposed to start loading new ROM it just freezes and i get a connection-error message.
I believe it has to do with the usb-connection but i can not figure out how to solve it. Have also tried ti install via card without any luck. Same problem remain... i can not get the SPL to finish.
Have any one experienced similar problem and how was it solved. It can not be a biggie but it is really ***.
As said, running this on XP. USB works fine with active sync and in usb to PC-mode.
Click to expand...
Click to collapse
Most probably YOU HAVE NOT DONE THE HARD-SPL FLASH FIRST
Please CHECK your tricolour screen: the world "olinex" must be there, which means you correctly flahsed the "olinex HARD-SPL" to your device
READ again. It's all written there (sticky posts)

First of all why should i ASK if there WAS AN ANSWER TO BE READ???
I have:
1. Tried to flash using exact intructions in:
http://forum.xda-developers.com/showthread.php?t=431218
Yes, the STICKY POST!
2. I have tried to flash from card whit hard_SPL:
http://forum.xda-developers.com/showthread.php?t=445662
Yes, again the STICKY POST!
And of course:
http://forum.xda-developers.com/showthread.php?t=446070
I have changed cables, ports. The flash seems OK, it says "olinex" in boot-loader but it has never finished.
Have searched the forum for other similar problems and found this thread.
I do not feel the need of repeating myself. Was hoping for some help and answers...

stuck on 0% cannot flash hspl yes i did search the forum

Hello,
i am trying to upgrade my spl version to 1.56 to be able to use the 1.5x roms
currently my device is a mess :
radio : 1.10.25.25
rom : 1.56.47.601
SPL : 1.14 stock
i cant flash from active sync because that causes wm 6.5 to crash
when i boot on spl, then launch hspl1.56, the transfer stays stuck at 0% then HSPLwrapper goes to recovery mode.
I have tried on several PCs
I have seen a post about an HTC diamond stuck on 0% that said i had to use the developer version of HSPL, but i m not sure what i downloaded, and it was for the diamond so i didnt go ahead.
Someone please help me get the device functionnal again X'( ?

mr.bryce said:
Hello,
i am trying to upgrade my spl version to 1.56 to be able to use the 1.5x roms
currently my device is a mess :
radio : 1.10.25.25
rom : 1.56.47.601
SPL : 1.14 stock
i cant flash from active sync because that causes wm 6.5 to crash
when i boot on spl, then launch hspl1.56, the transfer stays stuck at 0% then HSPLwrapper goes to recovery mode.
I have tried on several PCs
I have seen a post about an HTC diamond stuck on 0% that said i had to use the developer version of HSPL, but i m not sure what i downloaded, and it was for the diamond so i didnt go ahead.
Someone please help me get the device functionnal again X'( ?
Click to expand...
Click to collapse
Enter bootloader.
run uspl 2.5 on pc
wait for the fone to reboot to the bootloader.
it'll show 1.xx.uspl
now run the hspl olinex wrapper.
its getting stuck because it cannot pass the security check..

or just follow the flashing for dummies guide http://forum.xda-developers.com/showthread.php?t=505377

ok i found this post meanwhile and followed step by step and it went ok:
http://forum.xda-developers.com/showpost.php?p=3930436&postcount=2
big splinter out my chest XD
thanks for your help
for info only uspl was not communicating either it said it could not open usb port

mr.bryce said:
ok i found this post meanwhile and followed step by step and it went ok:
http://forum.xda-developers.com/showpost.php?p=3930436&postcount=2
big splinter out my chest XD
thanks for your help
for info only uspl was not communicating either it said it could not open usb port
Click to expand...
Click to collapse
Ya manual spl is the last option left if USPL does not work..
neways glad u r successful in ur need.
cheers,
chetan

No need for this thread. All solutions and help can be found in either HSPL or Dummies guide threads. Please post further queries in these threads.
Ta
Rick

Cannot get the spl changed!!! Help

I have followed all the instructions on this website!! I have microsoft Vista and I installed the appropriate drivers on my phone to change the USB and everytime I try run USPL GUI v 2.5 I get a message saying Error accessing device. The phone is in bootloader mode as well while I do this and I tried to do the SSPL MAnual Touch HD on my phone and got error messages as well.....what am I doing wrong! Im stumped

Surely this phone is out of Warranty
hd2person said:
I have followed all the instructions on this website!! I have microsoft Vista and I installed the appropriate drivers on my phone to change the USB and everytime I try run USPL GUI v 2.5 I get a message saying Error accessing device. The phone is in bootloader mode as well while I do this and I tried to do the SSPL MAnual Touch HD on my phone and got error messages as well.....what am I doing wrong! Im stumped
Click to expand...
Click to collapse
You're out of warranty right?
So why not just use HardSPL?
Regards,
Tigermoto.

Same problem with Vista and Seven, even with the drivers that should work.
My solution is using an old backup notebook with XP.

Please post further queries/responses regarding flashing, USPL & HSPL here. No need for another thread
Thread closed

Can't flash anything to phone anymore

Hello,
I installed the latest kernel(the very last one of clemsyn of post 199) from the kaiser kernel thread and now my phone doesn't flash or even boot into ANDROID
When I try to boot into Android, the final lines are:
Install module for this kernel
apply modules/androidupdat.tgz
Failed
from sourceforge​
When I try to flash another kernel:
1. I get the tri-colour screen with the following on it:
KAIS130
SPL-3.34.0000
CPLD-8
Serial (this is written in the white part of the screen)​
2. I get the white screen past the tri-colour screen with an consistent loading.... on it. This doesn't change​
THE 1 AND THE 2 ARE DIFFERENT SD CARDS.
I flash with:
KAISDIAG.NBH from http://forum.xda-developers.com/showthread.php?t=680518
KAISIMG.NBH from different sources and the RUU_signed.nbh renamed to KAISIMG.NBH from ''Kaiser_HTC_ASIA_HK_WWE_3.34.721.2''
PLEASE HELP...

1st DO NOT DOUBLE POST.
2nd, did you install Hard SPL ?

If you want a answer to your question please change the title of the thread.
I'll edit the post with the answer after that.

http://forum.xda-developers.com/showthread.php?t=433835
For flashing windows mobile I used the above link, the link talks about using HardSPL so I suppose I have HardSPL installed, but I don't know for sure cause this was so long ago. Is there another way to check...
Also if we are able to flash kernels, isn't that to be seen the same as flashing Windows Mobile roms. If that's the case I must have hardspl installed. Because Dave Shaw says that you can't flash roms with a sd card unless you have Windows Mobile installed: http://forum.xda-developers.com/showthread.php?t=423486&page=34
DaveShaw said:
IIRC you cannot use the SD card to flash a ROM unless you have Hard SPL.
Ta
Dave
Click to expand...
Click to collapse
As a solution I tried to put Windows Mobile back, I got the update utility on the pc and the phone loading for 1% and then it would give an error: Invalid Vendor ID, anyone knows how to bypass this??
**I forced the phone into tri-colour screen mode, it was recognized by Active sync but it said to be not connected

Download the original windows mobile rom from htc site
download hard spl from tytn thread
put it in boot mode (tricolor)
flash original rom
do all steps for the new phone
flash hard spl (follow the guide in tytn thread)
flash the radio if needed
follow all the steps in atools guide
Merry Christmas!!

l1q1d said:
Download the original windows mobile rom from htc site
download hard spl from tytn thread
put it in boot mode (tricolor)
flash original rom
do all steps for the new phone
flash hard spl (follow the guide in tytn thread)
flash the radio if needed
follow all the steps in atools guide
Merry Christmas!!
Click to expand...
Click to collapse
There are a couple of problems with flashing the original rom, first I am unable to establish a active connection with active sync, one of the requirements to flash. ALSO MORE IMPORTANTLY when I flash it continues for 1% but then I get the Invalid vendor ID error and before my Android adventure this simply worked and I COULD flash the rom.
According to the HTC Kaiser wiki this can be fixed with flashing HardSpL, but when I try to do so it says error 260 the first time and error 262 the second time.

Dude, download the original rom from here:
http://www.htc.com/us/support/tilt-att/downloads/
Then switch your phone ON, holding the camera button, which will get you in a tri-color screen. Then plug the device in the USB cable with your PC. Active sync will not work. Don't worry, run the downloaded original ROM.
Then after that follow the steps from the previous post.

hom.hom said:
There are a couple of problems with flashing the original rom, first I am unable to establish a active connection with active sync, one of the requirements to flash. ALSO MORE IMPORTANTLY when I flash it continues for 1% but then I get the Invalid vendor ID error and before my Android adventure this simply worked and I COULD flash the rom.
According to the HTC Kaiser wiki this can be fixed with flashing HardSpL, but when I try to do so it says error 260 the first time and error 262 the second time.
Click to expand...
Click to collapse
Did you test with my instruction before posting?

IT WORKED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Apparently it matters whether you use the stock version for the HTC Kaiser while having the MDA Vario III from T-Mobile, which seems to require a different rom.
THANK FOR YOUR HELP!!

[Q] HTC HD7 update to Windows 7.8?

Hi everybody,I have a HTC HD7 with this software version.
OS Version: 7.10.8779.8
Firmware revision number: NG+3.4
Hardware revision number: 0002
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 3.1.2250.0(119314)
Chip SOC version: 2.2.5.0
I would like to update phone to Windows 7.8,as i can see,i think that my phone hasn't got stock rom,so how sholud I update it to 7.8?Can i install stock 7.8 rom or I have to install some other 7.8 rom?And do I have RSPL/HSPL installed on my device?When I connected phone to Zune,it gave me an update to 7.10.8783.12,I went through,but it gave me a error code 80180048,so what should I do?
Thank you in advance.
Greetings.

As I can see my device has got HSPL installed,so I followed this tutorial to install custom rom.
http://forum.xda-developers.com/showthread.php?t=1295068
But,when i want to install rom using task29 i get error,saying that device is not connected.
First I have entered bootloader mode,than i connected the phone to PC,on phone screen it changed from SERIAL to USB,but no luck,task 29 keep saying that device is not connected,so I can't install 7.8 custom rom.
Please help.
Thanks.

djole199 said:
As I can see my device has got HSPL installed,so I followed this tutorial to install custom rom.
http://forum.xda-developers.com/showthread.php?t=1295068
But,when i want to install rom using task29 i get error,saying that device is not connected.
First I have entered bootloader mode,than i connected the phone to PC,on phone screen it changed from SERIAL to USB,but no luck,task 29 keep saying that device is not connected,so I can't install 7.8 custom rom.
Please help.
Thanks.
Click to expand...
Click to collapse
Do you want to install a custom ROM or do you just want to update to WP 7.8?

I would like to install Deepshining HD7 v8.1 ROM,on current ROM I have Nokia Drive,and i would like to have it on 7.8 as well,does Nokia Drive come with ROMs or I have to install it my self?As I said,I tried to install Deepshining HD7 v8.1 Custom Rom via task 29,but i was unable because of device not connected error.
P.S.I am on Windows 7 64bit.
Thanks for the reply.

djole199 said:
I would like to install Deepshining HD7 v8.1 ROM,on current ROM I have Nokia Drive,and i would like to have it on 7.8 as well,does Nokia Drive come with ROMs or I have to install it my self?As I said,I tried to install Deepshining HD7 v8.1 Custom Rom via task 29,but i was unable because of device not connected error.
P.S.I am on Windows 7 64bit.
Thanks for the reply.
Click to expand...
Click to collapse
if Bootloader version is 3.xx or 2.xx or 1.xx
download XSPL, http://forum.xda-developers.com/showpost.php?p=16189671&postcount=1
extract the contents of the rar.
run DFT_RSPL..._LAUNCH.exe
please, read information text. select 'Next' button.
power off device and enter Bootloader.
connect device via USB to PC, 'Serial' will change to 'USB' once connected properly.
select 'Next' button on the XSPL wizard and it should now detect your device.
note. do not proceed if OSPL is 5.xx or 4.xx, instead go to Step 05.
select the closest OSPL, on the wizard, to the one on device.
select 'Next' button. wait until wizard proceeds to final page. read and close window.
note. device must boot into Bootloader.
if Bootloader reads RSPLX.Y.Z and CotullaRSPL, then RSPL was successful.
continue to Step #30 or #38.
Click to expand...
Click to collapse
Quoted from http://forum.xda-developers.com/showthread.php?t=1295068
The Dynamics 2.2 ROM ( http://forum.xda-developers.com/showthread.php?t=1523991 ) has all the Nokia apps pre-installed,
The Deepshining 8.1 doesn't, you will need to install them manually

I don't understand,I have to install RSPL or HSPL every time when i want new ROM?
When I enter Bootloader here is what it says.
PD29100 SS-BC (4K)
HSPL3.1.2250.0(119314)
CotullaHSPL 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
If I understood it from the guide above,i just have to install Custom ROM now?Am I right?

djole199 said:
I don't understand,I have to install RSPL or HSPL every time when i want new ROM?
When I enter Bootloader here is what it says.
PD29100 SS-BC (4K)
HSPL3.1.2250.0(119314)
CotullaHSPL 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
If I understood it from the guide above,i just have to install Custom ROM now?Am I right?
Click to expand...
Click to collapse
Which ROM do you want to install?

I would like to install The Deepshining 8.1 ROM,than i wold like to install Nokia Drive.

djole199 said:
I would like to install The Deepshining 8.1 ROM,than i wold like to install Nokia Drive.
Click to expand...
Click to collapse
You should be able to install Deepshining v8.1.
Here's the link http://d-h.st/4d6

Yes,but like I said,I tried twice to install it,and task 29 said that device is not connected,
I followed task 29 steps,and it says.
2.Establish an ActiveSync connection with your Pda Phone.
I think this is the problem why it doesn't work,becuse there is not ActiveSync for Windows 7,but I installed Windows Mobile Device Center,but still no luck,what i noticed is that my PC can see the phone in Windows Mobile Device Center only if i turn on Zune,emidietly if I turn of Zune,Windows Mobile Device Center says that device is not connected,and trouble is that when phone is in Bootloader,Windows Mobile Device Center and Zune don't recognize it.

djole199 said:
Yes,but like I said,I tried twice to install it,and task 29 said that device is not connected,
I followed task 29 steps,and it says.
2.Establish an ActiveSync connection with your Pda Phone.
I think this is the problem why it doesn't work,becuse there is not ActiveSync for Windows 7,but I installed Windows Mobile Device Center,but still no luck,what i noticed is that my PC can see the phone in Windows Mobile Device Center only if i turn on Zune,emidietly if I turn of Zune,Windows Mobile Device Center says that device is not connected,and trouble is that when phone is in Bootloader,Windows Mobile Device Center and Zune don't recognize it.
Click to expand...
Click to collapse
Did you install the drivers?

What drivers?

djole199 said:
What drivers?
Click to expand...
Click to collapse
When you enter bootloader while your phone is connected to the PC there will need to be some drivers installed

Ok,where can i download them?

You don't need to download them you can just connect your phone to the PC and enter bootloader it will start installing.

Can U tell me how to do it,because when i turn off phone and connect it,phone starts up by itself.

djole199 said:
Can U tell me how to do it,because when i turn off phone and connect it,phone starts up by itself.
Click to expand...
Click to collapse
Plug your USB cable in your PC without your phone connected, now turn off your phone and press power on + volume down on your phone and the colour screen will pop up at the bottom it will say "Serial", now you will need to plug in your USB cable that was already connected to your PC and the drivers will install and if you have done everything right it will says "USB" at the bottom of your screen

Thans,it went through,I am installing The Deepshining 8.1 ROM right now.

djole199 said:
Thans,it went through,I am installing The Deepshining 8.1 ROM right now.
Click to expand...
Click to collapse
I'm happy to hear that! Now for Nokia Drive try this thread http://forum.xda-developers.com/showthread.php?t=2070997
Q: How to deploy XAPs?
A:
1. You need to connect your phone to your desktop
2. Start Zune and wait for Zune to discover your phone.
3. Run Multiple Xap download here http://forum.xda-developers.com/showthread.php?t=943842 and make sure your device is not screen locked.
4. Deploy Xaps
Click to expand...
Click to collapse
Have fun with your new ROM.
Ps. a click on the thanks button would be highly appreciated

I downloaded Multiple Xap,but it wont start,also Devstore8 on my phone is not working.
Is there another way do deploy XAPS.
Thanks once again.