Related
hi guys,
i was excited about the new Radio upgrade, so i tried to flash it. i got an error, because my SPL is 2.05. so i tried to unlock the phone using jerpelea's guide, flash to 1.09 -->success, then WWE (1.10) but an error occured saying invalid vendor ID during WWE flash. now i have SPL 1.09 on my phone and my phone is stuck on the 2nd boot screen of jerpelea's WM6.1 beta 4 ROM. my phone is fully unlocked using jerpelea's unlock guide, that's how i got to install SPL 1.09 successfully. how can i recover my phone? please help.
Update 1: i tried to flash back the original dopod 595 WM5 ROM. i mixed the RUU updater from the latest official ROM with the nbh from dopod WM5 ROM. the flashing works. when it's 100%, the phone reboots and, i got back to the same problem. stuck at 2nd/3rd boot screen. i now have IPL-0.90 and SPL 1.09 on my phone. Please help me to recover my phone. i've tried to hard SPL shown in the wiki guide, doesnt work. says invalid vendor ID crap. i really dont know what to do now.
Update 2: when the device boots, it stucks on the 2nd/3rd boot screen and if the USB cable is attached, for a brief moment, windows can detect the phone and i can even browse the content of the phone from my PC. but after that, the device disconnects itself and just remain stuck at the 2nd/3rd boot screen. the device appears to be totally freezed/hang. even the LED charging indicator will not turn off when i unplug the device from computer
i believe what i need to do now is to make a nbh image that is signed to i dont get any corrupted image message when trying to flash. i used HTC ROM editor to mix and match the SPL and IPL file so that i can downgrade the SPL to 2.05 and upgrade it again later. but i dont know how to sign nbh files.
If i were you I'd use this one =)
futureshock said:
ok i found it i didn't read further the 1st page on sspl thread
edit:
have repacked it with runme.bat and 77.7er SSPL ...
Radinly_1.54.30.10
Click to expand...
Click to collapse
At least I did and it worked =)
and then I'll highly recommend this WIM6.1 release by FutureShock: http://forum.xda-developers.com/showthread.php?p=2094056#post2094056
GL =)
I've GOT IT!!! using various mix and match method, im flashing the phone now!!! fingers crossed it'll boot later
UPDATE: DOESNT WORK! PLEASE HELP
It sure will.. Even I got it to work really fine
crap!. doesnt work. it's still SPL 1.09 and stuck at 2nd boot screen.
is there a ROM editor that works for meteor? can someone please suggest one that can be used to sign the nbh file.
jerpelea, or futureshock, please help
not good news
I think I know what do you mean. My device was in very same state like yours few mnonths ago.
Try to run mtty and the command "info 2" without quotes.
Do not forget to disable USB on activesync settings before running mtty.
You will get an answer which includes the CID of your device.
If not (this was my case), you have to send it to the repair center probably.
My device CID was Qtek_A07 (RUS) and I have tried to instal the first official WWE 1.34 ROM update (combined from SPL.nbh and ROM.nbh) and it replaced only the SPL, and the ROM update crashed.
There was not way out so I sent it to the repair center.
The WWE images are expecting the device with CID Qtek_Z12.
PiGeonCZ said:
I think I know what do you mean. My device was in very same state like yours few mnonths ago.
Try to run mtty and the command "info 2" without quotes.
Do not forget to disable USB on activesync settings before running mtty.
You will get an answer which includes the CID of your device.
If not (this was my case), you have to send it to the repair center probably.
My device CID was Qtek_A07 (RUS) and I have tried to instal the first official WWE 1.34 ROM update (combined from SPL.nbh and ROM.nbh) and it replaced only the SPL, and the ROM update crashed.
There was not way out so I sent it to the repair center.
The WWE images are expecting the device with CID Qtek_Z12.
Click to expand...
Click to collapse
this is what i get with mtty
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
what's the meaning of this? is there any hope?
i ran the format command anyway. device reboots and still stuck at the windows mobile logo screen. what should i do next?
alexnvidia said:
this is what i get with mtty
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
what's the meaning of this? is there any hope?
i ran the format command anyway. device reboots and still stuck at the windows mobile logo screen. what should i do next?
Click to expand...
Click to collapse
why did you format ?
try to reflash 1.09 spl
and after this wwe one of 1.34 roms to get 1.10 spl
If you bothered to read the Wiki, you would have seen this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
If you can't bother to read the wiki, don't play with roms!
Actually, I did read that, and a couple of problems:
1) Boot Loader is 1.09
2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.
3) CID appears to be corrupted, as per the earlier output pasted.
from other forum ...... so read wiki
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
but i dont know if you have the knowledge
jerpelea said:
If you bothered to read the Wiki, you would have seen this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
If you can't bother to read the wiki, don't play with roms!
Actually, I did read that, and a couple of problems:
1) Boot Loader is 1.09
2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.
3) CID appears to be corrupted, as per the earlier output pasted.
from other forum ...... so read wiki
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
Click to expand...
Click to collapse
jerpelea: First of all I will say thank you for taking all that time you do spend on the ROM cooking/building/making/what-ever-is-the-right-name and I/we really appreciate it!
jerpelea said:
but i dont know if you have the knowledge
Click to expand...
Click to collapse
I think that comment was really unnecessary!
As a n00b I know how hard it is to understand what’s happening. I did read the wiki’s and still I didn’t get HOW TO upgrade a ROM until I found a great post in FutureShock’s thread
darkDirk said:
First of all:
It's fantastic what you are doing with wm6.1 and the Breeze, Futureshock !
I am new and trying to upgrade it myself, but at first I didn't have any luck.
Here is a simple newby step-by-step manual:
- Download and extract a MTeoR-FutureShock-WM61-xxxx.x.rar
- Check your Mteor battery in more then 50 % full
- connect the Mteor to the computer via usb and check if Activesync works
- go with DOS (cmd line) to the directory and start runme.bat
- On the Mteor press camera and powerbutton at the same time.
- then immediately press any key on the computer to continue the batch script.
- now you should see the 3-color bootscreen
- press any key to start the rom-update program and follow its directions.
When the update is finished (in less then 5 minutes), then wait untill the first boot is complete.
If you don't get the 3-color bootscreen or you the update on the Mteor stays on 0 % and the rom-updater displays an error, try testing this:
On the Mteor start the explorer and in the root directory (press UP once) find SSPL.EXE en start it.
If the Mteor won't start the program and there is an error like "insufficient trustlevel".
You need to remove the application lock on your Mteor.
Run SDA_ApplicationUnlock.exe on your PC with Activesync working and then install SP_AllowCertificateInstall.cab on the Mteor.
You will find those two in the .rar in ".\opt Software\Unlock Tools"
Then redo from the start.
Then, Have fun !! (Futureshock & DarkDirk)
P.S. works on a BREE100 with IPL-0.90 and SPL-2.05.
Click to expand...
Click to collapse
But I still do not know what SSPL, SPL, IPL or whatever there is does to me or/and the phone.
Anyway. Thanks for all the work.
if someone has a corrupt CID just send me an pm...
jerpelea said:
If you bothered to read the Wiki, you would have seen this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
If you can't bother to read the wiki, don't play with roms!
Actually, I did read that, and a couple of problems:
1) Boot Loader is 1.09
2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.
3) CID appears to be corrupted, as per the earlier output pasted.
from other forum ...... so read wiki
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
but i dont know if you have the knowledge
Click to expand...
Click to collapse
with all the respect what you do for this community, isn't taht you who advice us to update the SPL before trying your images?
in this thread http://forum.xda-developers.com/showthread.php?t=384398 you should probably higlight that the update should be done only on WWE devices.
jerpelea said:
If you bothered to read the Wiki, you would have seen this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
If you can't bother to read the wiki, don't play with roms!
Actually, I did read that, and a couple of problems:
1) Boot Loader is 1.09
2) OS won't load, so can't use any of the ActiveSync-based methods for downgrading to an older version, such as 1.04.
3) CID appears to be corrupted, as per the earlier output pasted.
from other forum ...... so read wiki
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
but i dont know if you have the knowledge
Click to expand...
Click to collapse
i did try to read as much as i could but apparently i didnt come across that. when i flashed to SPL 1.09, the device booted up just fine. it is when i try to update to WWE 1.10, the update process failed and bricked my phone. for your information, i was following the exact steps described by you in your unlocking/SSPL guide. you mentioned upgrade to SPL 1.09, then WWE 1.10. this is exactly what i did. i dont know what went wrong. im sure if im as knowlegable as you are, i wouldnt have screwed up my phone. my bad.
just to be fair, your method did work when i updated my dopod 595 (WWE device) to your WM6.1 beta 4 ROM. but i never upgraded my SPL to 1.10. i only thought of upgrading SPL when you posted the new radio release and that's where i screwed up.
anyway, what is important here is, is my phone unrecoverable? im reading the links you posted as i type, and i'll give the methods. maybe based on your experience, you could suggest some ways to do it. thanks.
alexnvidia said:
hi guys,
i was excited about the new Radio upgrade, so i tried to flash it. i got an error, because my SPL is 2.05. so i tried to unlock the phone using jerpelea's guide, flash to 1.09 -->success, then WWE (1.10) but an error occured saying invalid vendor ID during WWE flash. now i have SPL 1.09 on my phone and my phone is stuck on the 2nd boot screen of jerpelea's WM6.1 beta 4 ROM. my phone is fully unlocked using jerpelea's unlock guide, that's how i got to install SPL 1.09 successfully. how can i recover my phone? please help.
Update 1: i tried to flash back the original dopod 595 WM5 ROM. i mixed the RUU updater from the latest official ROM with the nbh from dopod WM5 ROM. the flashing works. when it's 100%, the phone reboots and, i got back to the same problem. stuck at 2nd/3rd boot screen. i now have IPL-0.90 and SPL 1.09 on my phone. Please help me to recover my phone. i've tried to hard SPL shown in the wiki guide, doesnt work. says invalid vendor ID crap. i really dont know what to do now.
Update 2: when the device boots, it stucks on the 2nd/3rd boot screen and if the USB cable is attached, for a brief moment, windows can detect the phone and i can even browse the content of the phone from my PC. but after that, the device disconnects itself and just remain stuck at the 2nd/3rd boot screen. the device appears to be totally freezed/hang. even the LED charging indicator will not turn off when i unplug the device from computer
i believe what i need to do now is to make a nbh image that is signed to i dont get any corrupted image message when trying to flash. i used HTC ROM editor to mix and match the SPL and IPL file so that i can downgrade the SPL to 2.05 and upgrade it again later. but i dont know how to sign nbh files.
Click to expand...
Click to collapse
run terratem
type info2
if it sais A07 then just flash rusian 1.34 rom and enerithing will be fine
application unlock it
run sspl 77.7
flash wm6.1
if it says enithing else you need to locate your original rom
till now i found that it sais a07 in most cases
BR
alexnvidia said:
i did try to read as much as i could but apparently i didnt come across that. when i flashed to SPL 1.09, the device booted up just fine. it is when i try to update to WWE 1.10, the update process failed and bricked my phone. for your information, i was following the exact steps described by you in your unlocking/SSPL guide. you mentioned upgrade to SPL 1.09, then WWE 1.10. this is exactly what i did. i dont know what went wrong. im sure if im as knowlegable as you are, i wouldnt have screwed up my phone. my bad.
just to be fair, your method did work when i updated my dopod 595 (WWE device) to your WM6.1 beta 4 ROM. but i never upgraded my SPL to 1.10. i only thought of upgrading SPL when you posted the new radio release and that's where i screwed up.
anyway, what is important here is, is my phone unrecoverable? im reading the links you posted as i type, and i'll give the methods. maybe based on your experience, you could suggest some ways to do it. thanks.
Click to expand...
Click to collapse
it depends on the info displayed on terraterm
for A07 you can use the russian rom to recover
this is what i got from terraterm. same as mtty.
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
i did flashed back to my original ROM after the first stuck in WM screen incident. and amazingly the flashing process works after several mix and match. after the original (WM5) ROM completed flashing, my IPL is downgraded back to 0.9 and SPL is still 1.09, and im still stuck at the WM logo screen (this time WM5 logo).
terraterm is a tool like mtty
what is your orignal rom??
just try to flash over sdcard... (look in wiki4more infos about that)
futureshock said:
terraterm is a tool like mtty
what is your orignal rom??
just try to flash over sdcard... (look in wiki4more infos about that)
Click to expand...
Click to collapse
i tried SD card flashing too yesterday. it says not allowed. i have already flashed over the original dopod 595 ROM and my phone is now WM5. the flashing is 100% successful, but it is still stuck at the second boot WM screen.
i think im in a really screw up position now. i have SPL 1.09 and IPL 0.9. i dont know what is corrupted now. is it the CID? SPL?
cid you can check with mtty and info 2...
if that so... just do what i have wroted in pm...
you could also just try the old htc rom (w. SPL 2.05)
futureshock said:
cid you can check with mtty and info 2...
if that so... just do what i have wroted in pm...
you could also just try the old htc rom (w. SPL 2.05)
Click to expand...
Click to collapse
both mtty and terraterm give me the same msg when i type info 2. it says time out (refer above for exact error message).
the original dopod 595 rom has SPL2.05. and it was successfully flashed into the phone. when the phone reboots, it is still stuck at 2nd boot screen (WM logo). i checked, the SPL is still 1.09, but IPL has been downgraded to 0.9.
Hello.
I have messed up seriously right now. I've flashed and flashed, original ROMs and Duttys, trying to get it to work.
I first got Duttys ROM flashed, but had problems with screnn-color and Flightmode.
Then I flashed directly from Duttys to Original 1.56 ROM, and during flashing something happend (don't know what).
Bottum line is that when starting phone, the screen says:
----------------------------
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
Serial
----------------------------
And that is with normal start (1 push on the start-button).
What to do now? All i want is to get back to original ROM, 1.56 or 1.14. Just so the phone is working.
Thanks A LOT for ANY help I can get.... I'm really stucked now...
in order to flash 1.56 based roms you have to flash hspl 1.56
hspl is not backwards compatible so if you want to flash back to an older rom based on older spl you must flash hspl 1.14 (or whatever)
check cracwhore's dummies guide to flashing roms explains everything
download hspl 1.56 olinex and uspl 2.5 from the stick thread named tut dummies guide to flashing..(by crackwhore)
steps there after are..
1..remove the sd card
2.. startup ur fone nd let it go to the screen as described by u..
3.. connect it via usb cable to ur pc(install necessar drivers from the same guide as mentioned above). If all goes ok till now ull see "usb" written in the white part of the screen as described by u and u can move on to the next step.. if not ill remain "serial". incase it remains serial then ull hv to downgrade ur drivers in vista os by drivers provided in the thread.
4. run uspl 2.5. U'll see 1.56.0000 change to 1.xx.uspl
5. Now run the HSPL wrapper u hv dnloaded..
6. phone reboots and ull see 1.56.olinex
if all works as described u can flash any 1.56 cooked rom without any difficulties..
feel free to ask ne ques that arise during the process
Hello and thanks for help.
I've read cracwhore's dummies guide about 20 times, but I don't know what to do now.
In the HSPL-thread it says that I "must Have Phone Synced with PC in Windows Mobile!!!". How to do that - when the device does not even start up? I only get the tricolor-screen and what I posted erlier.
cvchetan said:
download hspl 1.56 olinex and uspl 2.5 from the stick thread named tut dummies guide to flashing..(by crackwhore)
steps there after are..
1..remove the sd card
2.. startup ur fone nd let it go to the screen as described by u..
3.. connect it via usb cable to ur pc(install necessar drivers from the same guide as mentioned above). If all goes ok till now ull see "usb" written in the white part of the screen as described by u and u can move on to the next step.. if not ill remain "serial". incase it remains serial then ull hv to downgrade ur drivers in vista os by drivers provided in the thread.
4. run uspl 2.5. U'll see 1.56.0000 change to 1.xx.uspl
5. Now run the HSPL wrapper u hv dnloaded..
6. phone reboots and ull see 1.56.olinex
if all works as described u can flash any 1.56 cooked rom without any difficulties..
feel free to ask ne ques that arise during the process
Click to expand...
Click to collapse
Thanks alot, I'll try this right away
hey there be sure u hv .net framework installed even before u try this out...
It worked!!
Thanks cvchetan, you really are my hero. Thanks thanks thanks thanks!!!
You don't know how glad I am right now, hehe.. Thanks again!! <3
well its nice tht u hv ur fone back nd workin..
cheers
I've also got the same problem.
I was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes for a split second and then nothing else happens.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Please help!
AFW said:
I've also got the same problem.
I was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
When I start blac_uspl.exe (USPL 2.5), a window flashes for a split second and then nothing else happens.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Please help!
Click to expand...
Click to collapse
Im having the same problem as you. I hope i havent bricked the phone.
AdamsvillE, go to this thread.
im kind of new to this. bought myself a htc hd, and i cant seem to update my rom via XT_Grid_Leo_2B . it just keeps getting stuck at 0% and shows the 262 error. tryed hard/soft reseting.. updating from the bootloader etc. any ideas? running windows 7 32
swatsqad said:
im kind of new to this. bought myself a htc hd, and i cant seem to update my rom via XT_Grid_Leo_2B . it just keeps getting stuck at 0% and shows the 262 error. tryed hard/soft reseting.. updating from the bootloader etc. any ideas? running windows 7 32
Click to expand...
Click to collapse
you need to look at the dummies guide for flashing custom/cooked ROMs,
http://forum.xda-developers.com/showthread.php?t=505377
I suggest you use USPL 2.5. READ AND FOLLOW INSTRUCTIONS STEP BY STEP
jigners said:
you need to look at the dummies guide for flashing custom/cooked ROMs,
http://forum.xda-developers.com/showthread.php?t=505377
I suggest you use USPL 2.5. READ AND FOLLOW INSTRUCTIONS STEP BY STEP
Click to expand...
Click to collapse
allright.. while flashing that spl thing :
HSPL2 - Flash new SPL (1.56.OliNex)
* (HSPL2a) Place your phone into its bootloader. <- done
* (HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
* (HSPL2c) If successful, go to step HSPL3. If the flashing process sits at 0% and you get Error [260] connection after some time, go to step (Troubleshooting). <- stuck at 0%
and yes, i always get the error, its stuck at 0% this is annoying.
Then you need to go to the section labeled Troubleshooting - manual SSPL
May help you more by posting in that thread. As I am pretty sure this thread will be closed.
i suggested you use USPL
swatsqad said:
allright.. while flashing that spl thing :
HSPL2 - Flash new SPL (1.56.OliNex)
* (HSPL2a) Place your phone into its bootloader. <- done
* (HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
* (HSPL2c) If successful, go to step HSPL3. If the flashing process sits at 0% and you get Error [260] connection after some time, go to step (Troubleshooting). <- stuck at 0%
and yes, i always get the error, its stuck at 0% this is annoying.
Click to expand...
Click to collapse
i suggested you use USPL 2.5, if you have i maybe able to assist you. instead you reported using HSPL. Sorry cant help you with HSPL, I've no experience using it.
jigners said:
i suggested you use USPL 2.5, if you have i maybe able to assist you. instead you reported using HSPL. Sorry cant help you with HSPL, I've no experience using it.
Click to expand...
Click to collapse
ok thanks for the support! i managed to flash it via SSPL-Manual-TouchHD . worked perfectly.
although i have one last question.. is there any way i can disable the notification screen when pressing on the status bar? i remember the old days, when i had a xda II, i like the old notifications more...
Original query ansered. Thread closed.
In future please use the search function before creating a new thread.
Any other queries on roms should be directed to that rom thread.
I've been lurking with the XDA forum for quite sometime now and its my very first posting and I'm having difficulties finding answers on search box I just simply give up looking for appropriate answer to my question. Since I like to use the good old Winmo 6.1 rom (Davideuck_V-7_MSVC to be exact)my bad is I forgot to SPL to earlier version 1.15 so got a green kinda thing on my screen, so I apply Restore_Stock_SPL_115 and everything went fine. (I know I'm stupid ) Unfortunately after I update the Time and Date it suddenly appear " This concludes the beta test for this software release....... blah, blah,.... guess what? its a time bomb can't do anything on screen but to reset. So I decide to re-flash it again but I got stuck at 0% on bootloader mode and got Error 262, I tried to understand whats the meaning of it and I did, but never got any solution how? I tried to flash it with HSPLWrapper_Blackstone_156OliNex to restore Winmo 6.5 but I got stuck again on 0%. something unusual I tried to reflash more roms and it didn't work. All the Roms I've wont reach 1% Even flashing on SD card trick wont load. And my spl ver 1.15 can't flash anything. So I that's why I need your help desperately...
Near enough the exact same situation as me! I think that 1.15 file may have issues.
wayneroughneckz said:
I've been lurking with the XDA forum for quite sometime now and its my very first posting and I'm having difficulties finding answers on search box I just simply give up looking for appropriate answer to my question. Since I like to use the good old Winmo 6.1 rom (Davideuck_V-7_MSVC to be exact)my bad is I forgot to SPL to earlier version 1.15 so got a green kinda thing on my screen, so I apply Restore_Stock_SPL_115 and everything went fine. (I know I'm stupid ) Unfortunately after I update the Time and Date it suddenly appear " This concludes the beta test for this software release....... blah, blah,.... guess what? its a time bomb can't do anything on screen but to reset. So I decide to re-flash it again but I got stuck at 0% on bootloader mode and got Error 262, I tried to understand whats the meaning of it and I did, but never got any solution how? I tried to flash it with HSPLWrapper_Blackstone_156OliNex to restore Winmo 6.5 but I got stuck again on 0%. something unusual I tried to reflash more roms and it didn't work. All the Roms I've wont reach 1% Even flashing on SD card trick wont load. And my spl ver 1.15 can't flash anything. So I that's why I need your help desperately...
Click to expand...
Click to collapse
If you are getting an Error 262, you need to run manual sspl in order to resolve this. Read this post for the steps (post #2) and sspl tool (post #1) - http://forum.xda-developers.com/showthread.php?t=505377. You can also get all of the steps needed to successfully flash. if you have questions, please post them in that thread.
It seems when I restart my phone normally, I noticed that the message about " This concludes the beta test for this software release....... blah, blah" the manila interface was behind it when I press the task manager and the volume buttons it responses means its not bricked (hope so) maybe the reason why I cant flash anything? Or whatever...Well that's my observation..... Please guys I needed my phone badly tomorrow
Did you not read my post . You can flash another rom, error 262 is common. You just need to use sspl before flashing to hspl 1.56.
if ur stuck with hspl and cant flash that than try uspl or try stock rom.... they get installed without hspl or uspl installed.... its available in the blackstone wiki section
and with stock rom get through tomorrow . than try hspl or uspl with custom rom later on when u have free time
Upgrade the ROM with latest official HTC release it upgrades the bootloader to ver 1.54 as well. Then you can install the newest version of HSPL or just use USPL to flash whatever cooked ROM you want.
Apologies on replying again here instead of posting on the designated thread , but forgive my innocence the thread says "" launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC. "" how exactly that's going to be done? Currently I got the tri-color screen saying SPL-1.15.0000 and a USB on the bottom and when I flash either hspl or uspl I always end up on gray screen with a 0% that doesn't move at all, how can I manually apply SSPL? I cant access Manila interface because of time bomb message? My life's getting complicated!
If possible try flashing from an XP box, Vista/7 might give you some additional trouble if you don't use the right drivers. But if you get to the 0% screen, the issue shouldn't be with the SPL... so don't worry, I doubt the phone is bricked
So: try XP and/or using the drivers provided in the Flashing-thread
zerozed said:
Upgrade the ROM with latest official HTC release it upgrades the bootloader to ver 1.54 as well. Then you can install the newest version of HSPL or just use USPL to flash whatever cooked ROM you want.
Click to expand...
Click to collapse
I tried the Official one Blackstone_WWE_1.56.405.1 and got Error[294] Invalid Vendor ID
wayneroughneckz said:
I tried the Official one Blackstone_WWE_1.56.405.1 and got Error[294] Invalid Vendor ID
Click to expand...
Click to collapse
Did you downloaded the ROM from the HTC site? If the ROM is from the official site try again using USPL.
I seach the wiki page and found the latest version which is "Blackstone_WWE_1.56.405.1" and I can't find it on the official site, it should be "WWE" not specifying on certain countries, so I manage to download it from Rapidshare link. and for the SSPL I don't think I can do that coz I can't access my phone coz it has tim bomb probably the main culprit here.
Any flashing problems should be posted in Dummies Guide thread.
Thread closed
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
go to olinex hard spl section and write about your problem maby they can help u
Onlinex hard spl section?
I must be blind. Where is that?
matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here
matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.
Tried both checked and unchecked and dont work
I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS
Great!!! I will remember that one too.