dead x1? - XPERIA X1 Q&A, Help & Troubleshooting

My x1 seems to be out of action. It was on standby and the top part the screen fell into water for an 1hr whilst fishing, any ideas to dry it out? and what phone should i look at to replace it?

rainsey said:
My x1 seems to be out of action. It was on standby and the top part the screen fell into water for an 1hr whilst fishing, any ideas to dry it out? and what phone should i look at to replace it?
Click to expand...
Click to collapse
I think Aspen. It's new, same winMo, the price is reasonable.
And go green phone, a plus point.
This evening, I wanna replace my troubled X2 with Aspen.

I would disassemble your phone and dry it out for several hours (why not placing it outside in the sun). There is a small chance that your phone will work again when it's completely dry.
Generally there is only one way to react if a electronic device get's wet: immediately pull the battery out to cut power. No shutting down, no anything, just pull the battery. Water alone cannot damage an electronic device. It's the shortcuts caused by humidity that destroys the electronics. Once I had a phone that fell into the toilet while it was running. I pulled the battery immediately and dried it out. No harm was done. But surely I was lucky too.

my x1works! all works except the sim reads as missing.. tested with another sim getting same results ideas?

Related

[Q] Broken Cappy (Water Damage?)

Hello XDA, I'm hoping you guys can save my Cappy.
I had a rather big Saturday night of which I have no memory, and upon regaining consciousness Sunday morning my phone wouldn't turn on. I though no worries, its probably just flat, so I plugged it in and went back to sleep, when I tried to turn it on after waking, I got the Download screen, but it was red. I immediately took out the power and pulled the battery, and fearing water damage, placed it in a bag of rice, where it has remained since then.
TL;DR
1. I think my Cappy got wet, its in rice, is there anything else I can do.
2. If its not water damage, any other ideas?
Thanks in advance.
Not really.. if you've damaged your hardware, then you've damaged your hardware.. not much anyone can do about that.
You can try leaving it with one of those moisture absorbing silicon packets you occasionally find in new shoes or electronics, if you have any laying around.
I dropped my Cappy in a sink full of water and saved it by leaving it in a container full of rice for about 24 hours. Worked great. However, if the phone was exposed to water and it wasn't completely dry when you plugged it in to charge, you may be S.O.L. The last thing you want to do is run an electric current through wet circuitry. At this point you've done all you can. You just have to wait and see what happens.

[Q] Another Water Damage Thread

Howdy,
Long version:
I left my galaxy note on the counter in my kitchen which is apparently not quite level. Overnight water pooled under it(never submerged, even partially). I did not notice until my alarm went off the following morning. As of this time it was still functioning properly. I moved it, wiped off the water. Took the protective case off and wiped the water off it was well, hooked it up to the charger and went back to sleep. 15 minutes later the vibration function went nuts while it popped up complaints about low battery. I say the vibration went nuts, because it wasn't the sustained vibration like you normally get it. It would cycle on and off about every half a second. I panicked, turned off the device and removed the battery where I noticed that the battery was wet, and under the battery as well.
So I wipe it off, put in a bag of rice and go back to sleep. Approximately 15(yes, way too soon) hours later I pull it out, put the battery in and turn it on. Works fine. few hours later I hook it up the charger and it immediately complains about the battery temperature.
Short version:
Phone at in a pool of water for 5+ hours, never fully submerged. Basically if you poured water on a level surface and sat your phone in it, thats what happened.. Anyways Water worked its way inside the phone(based on disasemble that occured later), and started vibrating randomly. took out batteyr and left in rice for 15 hours. Put it back together attempted to charge, phone complains battery is too hot immedately.
Observations:
I take out the battery and disasemble the device down to the point where the circuit board is separate from the display.
The far right ( +) connector that touches the battery appears to be slightly corrodeded. I rub it with a cotton swab to clean it. From watermarks it doesn't look like anything else got wet and by now its completely dry. I don't see any 'red' spots or stickers, but I'm unfamiliar with the water damage indicators, and the information i found from searches was innacurate(no white dot on top of battery, no red marks anywhere on it)
Panic
I put it back together try again, same deal. The phone doesn't seem to have a way to view the battery temperature reading(*#0*#), so I downloaded an app called 'Doms diagnostic tool' which indicates that the battery temperature is pegged at 80 degrees C and it does not fluctuate. I don't know if this app is actually reading anything though.
Can someone who has a working phone try this out? App is free.
Is it worth putting it back in rice even though its dry even on thorough dissemble?
Any idea how to get legit data from the sensor to verify if its shorted out etc?
Would a replacement battery with out the sensor resolve this issue?
Anyone have pictures of where water damage indicators are?
I searched thoroughly and found no answers besides taking it to a service center. Since I'm in America, and this is an international phone, I don't believe the manufacturer will honor the warranty even if the phone shows negative for water damage. My service is ATT, but I bought the phone at expansys( i think).
best at this point is to check your insurance, if its covered. In some countries I read this is covered as it was accidental.
I would recommend goong to samsung and let them check it, with the true story ofc. Now if they find whats wrong, they might be lenient, or not. Anyhow then you know whats broke, and you can decide to fix it for yourself or have it fixed. At this point it sounds like corrosion on one of the boards, or shorts somewhere.
Sent from my GT-N7000 using Tapatalk 2

[Q] Can re-soaking fix water damage?

I know it seems like a stupid question but I've got nothing to loose at the moment so I'll explain my situation.
About 3 months ago I took my Xperia Z1 for a swim in the pool to see how the camera performed underwater. The screen started to go black when I took it out and then it completely shut off. I took it inside and turned it on again. It lasted a minute before shutting off so I plugged it in to the charger and got the boot logo before shutting off again with nothing: Screen was off, no led, no vibrations, nothing.
I opened the flaps and they were still white and still are today and there was no moisture or anything. I tried plugging the phone in a few days ago to see if it still works and the led turned on and it just stays like that with no action. Left it for a few hours but still nothing.
I don't really need this phone anymore because I have a Z5 now but a second handset is always nice to have. The pool water would have had a very small amount of salt in it and I think that might be causing issues. Either that or there is still water in there (unlikely) or parts have rusted or even the phone might have got shocked when I plugged it in to charge. What I was thinking was opening the ports and soaking it in water for a minute or less and then taking it out and putting it in a bag of dry rice to drain the water out of it. I'm not sure if it will work but I haven't got anything to loose so I was wondering if it is even worth giving a shot or even some tips would be nice.
tommylittle02 said:
I know it seems like a stupid question but I've got nothing to loose at the moment so I'll explain my situation.
About 3 months ago I took my Xperia Z1 for a swim in the pool to see how the camera performed underwater. The screen started to go black when I took it out and then it completely shut off. I took it inside and turned it on again. It lasted a minute before shutting off so I plugged it in to the charger and got the boot logo before shutting off again with nothing: Screen was off, no led, no vibrations, nothing.
I opened the flaps and they were still white and still are today and there was no moisture or anything. I tried plugging the phone in a few days ago to see if it still works and the led turned on and it just stays like that with no action. Left it for a few hours but still nothing.
I don't really need this phone anymore because I have a Z5 now but a second handset is always nice to have. The pool water would have had a very small amount of salt in it and I think that might be causing issues. Either that or there is still water in there (unlikely) or parts have rusted or even the phone might have got shocked when I plugged it in to charge. What I was thinking was opening the ports and soaking it in water for a minute or less and then taking it out and putting it in a bag of dry rice to drain the water out of it. I'm not sure if it will work but I haven't got anything to loose so I was wondering if it is even worth giving a shot or even some tips would be nice.
Click to expand...
Click to collapse
Resoaking your phone will help as much as trying to jump from a cruise ship in the middle of the ocean for the second time and you can't swim...
optimumpro said:
Resoaking your phone will help as much as trying to jump from a cruise ship in the middle of the ocean for the second time and you can't swim...
Click to expand...
Click to collapse
Haha yeah that's what I thought
tommylittle02 said:
Haha yeah that's what I thought
Click to expand...
Click to collapse
To clarify, the Xperia Z1 relies on closed ports to ensure waterproofing. So soaking it a second time would destroy it further.
there is a easy way you can try.
buy some electrical contact cleaner from a computer shop or maplins etc, spray that all over the circuitry and contacts and scrub it off with a paint brush, there is a good chance it will work again as it will remove any corrosion casued by water, ive repaired hundreds of water damaged phones this way and it doesnt need any special things.....

My Note 5's screen stopped working after water damage , can hear sounds , any help ?

Just a few hours ago while riding bike Suddenly rain started and My note 5 in a pocked soaked little bit, when I stopped I cleaned it with cloth it was working fine till half hour but when I came home the screen flickered and went Black. Notification LED and sounds are still working, I tried to shut down the phone by pressing and holding power button but it couldn't for some time, it restarted twice in between that, I can tell by sounds but I think it's off for now. I have kept the phone in a rice bowl . Is is possible to my phone and phones screen work properly ? is there any other way ? I saw in one video that we can put it in isopropyl alcohol 99% for half hour but I am unable to get it . Please suggest me if there is any solution ?
nvrmndryo said:
Just a few hours ago while riding bike Suddenly rain started and My note 5 in a pocked soaked little bit, when I stopped I cleaned it with cloth it was working fine till half hour but when I came home the screen flickered and went Black. Notification LED and sounds are still working, I tried to shut down the phone by pressing and holding power button but it couldn't for some time, it restarted twice in between that, I can tell by sounds but I think it's off for now. I have kept the phone in a rice bowl . Is is possible to my phone and phones screen work properly ? is there any other way ? I saw in one video that we can put it in isopropyl alcohol 99% for half hour but I am unable to get it . Please suggest me if there is any solution ?
Click to expand...
Click to collapse
1)Power Off Your Device And Use Hair Dryer To Dry Off Possible Water Gathered at sides of Edges And Display Corners
(Dont Hold Hair Dryer Much Closer To Device As It Will Probably Damage Internal Circuits, Just Hold It At About Secure Distance From Device)
2)You Can Also Try To Put Your Device Below lightening Electricity Bulb To Dry Off Water
(Especially Orthodox Bulbs Which Lights Yellowish In Colour Which Produces Much Heat After Lightened For Long Duration, Here also Hold/Keep Your Device at secure distance to avoid internal damage to device)
Note :-
Be sure to keep your device turned off and don't try to charge it more as it will cause internal circuits damage due to water reactions with electricity
Mr.360° said:
1)Power Off Your Device And Use Hair Dryer To Dry Off Possible Water Gathered at sides of Edges And Display Corners
(Dont Hold Hair Dryer Much Closer To Device As It Will Probably Damage Internal Circuits, Just Hold It At About Secure Distance From Device)
2)You Can Also Try To Put Your Device Below lightening Electricity Bulb To Dry Off Water
(Especially Orthodox Bulbs Which Lights Yellowish In Colour Which Produces Much Heat After Lightened For Long Duration, Here also Hold/Keep Your Device at secure distance to avoid internal damage to device)
Note :-
Be sure to keep your device turned off and don't try to charge it more as it will cause internal circuits damage due to water reactions with electricity
Click to expand...
Click to collapse
I've kept it in sealed rice bowl for now , I'll keep it for atleast 12 hrs .fingers crossed !!
after keeping phone in rice for 12 hours , phone's display is not coming up but its working i can hear sounds, click pics by double pressing home and via volume buttons. what can i do for display?
nvrmndryo said:
after keeping phone in rice for 12 hours , phone's display is not coming up but its working i can hear sounds, click pics by double pressing home and via volume buttons. what can i do for display?
Click to expand...
Click to collapse
Unfortunately you got water into the charging port and it caused a short circuit breaking the screen/LCD.. You're pretty much going to have to replace the entire screen/LCD.. Right now your best bet is to put it back in the rice for at least 2 days and put it in the plastic baggys that you can buy so it sucks the moisture out of the device.. Seems to me like your screen is done for though..
MrMike2182 said:
Unfortunately you got water into the charging port and it caused a short circuit breaking the screen/LCD.. You're pretty much going to have to replace the entire screen/LCD.. Right now your best bet is to put it back in the rice for at least 2 days and put it in the plastic baggys that you can buy so it sucks the moisture out of the device.. Seems to me like your screen is done for though..
Click to expand...
Click to collapse
my device started successfully- screen, touch was working but it was flickering a bit in the top side, I immediately power offed device and put it in rice. so I am positive it will work, i have ordered isopropyl alcohol 99.9%, I am goin to put phone for half and hour and then put again in rice for 2 days , what you suggest ? isopropyl alcohol won't damage right? ive seen video on youtube thats why I am thinking about it .
I saw in this video what you think should i do it ?https://www.youtube.com/watch?v=sqolv4Ofsrc&t=609s
nvrmndryo said:
my device started successfully- screen, touch was working but it was flickering a bit in the top side, I immediately power offed device and put it in rice. so I am positive it will work, i have ordered isopropyl alcohol 99.9%, I am goin to put phone for half and hour and then put again in rice for 2 days , what you suggest ? isopropyl alcohol won't damage right? ive seen video on youtube thats why I am thinking about it .
I saw in this video what you think should i do it ?https://www.youtube.com/watch?v=sqolv4Ofsrc&t=609s
Click to expand...
Click to collapse
No like I said leave it alone I've done many of these repairs and if you keep powering it on before the water is fully sucked out by the rice you run the chance of poping a capacitor and then it will not be able to even charge and about the alcohol I don't recommend that unless you can find 99% rubbing alcohol because if you buy 50% rubbing alcohol you are going to be adding 50% water in again with the other 50% alcohol.. 99% means 99% alcohol and dry super quickly but there's still that 1% percent water in there! The bag in the rice trick can do the trick if you didn't short circuit nothing on the motherboard but once you short circuit the board it's not easy to fix at that point without proper tools.. Leave the bag of rice like in the sun for a little while too like inside of a car because that will help evaporate the water and the rice will suck it in..
MrMike2182 said:
No like I said leave it alone I've done many of these repairs and if you keep powering it on before the water is fully sucked out by the rice you run the chance of poping a capacitor and then it will not be able to even charge and about the alcohol I don't recommend that unless you can find 99% rubbing alcohol because if you buy 50% rubbing alcohol you are going to be adding 50% water in again with the other 50% alcohol.. 99% means 99% alcohol and dry super quickly but there's still that 1% percent water in there! The bag in the rice trick can do the trick if you didn't short circuit nothing on the motherboard but once you short circuit the board it's not easy to fix at that point without proper tools.. Leave the bag of rice like in the sun for a little while too like inside of a car because that will help evaporate the water and the rice will suck it in..
Click to expand...
Click to collapse
new update - took phone out of the rice again , it booted up well and worked without any issue for a while but again screen went to black . after few attempts , phone started working normally , but this time I powerd off device and kept in rice again. when display was on it didnt flickr , touch was working good.so when its on everything is working perfect but display getting back to black in sometime. what u think , there is still water ? isopropyn alcohol i got is 99% pure , but I am afraid of doing it as my display is working atleast for sometime ,so I dont want to risk anything . my bet is on Rice , and its raining heavyly here , so no sunheat . I thought of drying it by hair dryer but its hot air dryer .
*how long should I keep it in a rice ?its already 36 hours.
Phone is working fine now.Thanks for replies. Rice did the work.

Water Damaged, Bootloop Huawei P10

Okay. I really need help here guys. So long ago I had water damaged my phone and I got it working again. About 2-3 months later the battery started acting up and showing percentages in 10s and soon after could only use it when it was plugged in.
Now, whenever I plug it in it immediately shows the Huawei logo and starts to boot up. Which I don't like because I remember it used to show a green battery circle before. But nevertheless its in a bootloop now. The weird thing is, I can't use the volume up button method. I don't know why. It just carries on.
Maybe I should wet the power button with water if its been held down causing it to immediately boot up when plugged in? i dont know.
If anyone could guide me or suggest what to do I would honestly be so appreciative. Thank you so much!
Could be a hardware issue. Water is causing corrosion to metal parts and if there is still a bit water inside your phone the corrosion can damage parts of the hardware. It's risky to use the phone without drying it completely. In the most bad case the battery can be shorted by the water which can cause a battery fire or explosion.
Bring your phone to a repair shop if you're not able to open it by yourself. But I think there's no hope anymore.
You should've let it dry completely before using it again.
Don't put water again to parts of the phone.
If you're able to open it, disconnect the battery and check the logic board for corrosion and water.
If there's still water you can remove it early by putting the logic board on a piece of cloth and wait for a few days.
You can also try to clean corroded parts with pure alcohol and cotton swaps.
Get a new battery to be safe, check if the old one is misformed. If it's so, don't use it again - NEVER!
Li-ion isn't a funny thing, it can be very dangerous.
If there's a shortage inside the battery or it's physically damaged it can burn out. The technology is based on cells. If the cells are getting shorted each other, a chain reaction starts and inside the battery the current flow can get so high that the battery start burning. It stops when every cell is damaged and the voltage is 0 - it's hard to extinguish such fires. There are many videos on YouTube.
So don't make fun with this, just do something if you feel safe in electronics. If not, go to a repair shop.

Categories

Resources