[Q] Update / Recovery mode not working - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello!
I have a brand new Samsung Galaxy S ( Austria A1 branded)
* My goal is to update to "android 2.2". (with odin...)
First problem:
Im pressing the home, volume up (also tried it with down) and the power on button, but the device boots with the usally "A1 welcome animation".
Has someone any idea ?

try down arrow (vol down) with home button.. then press power on button.. when you see first screen take finger off power button.. count to 1-1000 then re-press power button ( all other buttons are held all during this).

http://forum.xda-developers.com/showthread.php?t=785201
Make sure you read the entire thread before trying any of that, as it might brick your A1 branded phone.

more details on the Wiki about that
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series

Related

How to enter in to bootloader mode

Can anyone please guide me how to enter to bootloader mode? I want to upgrade my Radio. : :?
to get my XDA IIi into the bootloader, I keep trying the reccord button, power, and hard reset but it just does a hard reset and comes up with the O2 splash and then loads windows???
am I doing something wrong here?
Can anyone pls. advise me??
Priyal
To get to bootloader, you need to press and hold the power button, the action button (the d-pad) and the reset button for about 2 seconds until serial is displayed clearly on the screen.
where to find the reset button
i have krome navigator f1
i am holding dpad + power button but not able to find the reset button..please help me how to find it
hardreset.eu/images/o2_xda_2i_hard_reset_soft_reset.jpg

[Q] Download/Recovery mode not working !! Help !! :(

My phone is not going in either of the download / recovery mode. I tried many times. Both 'Vol up + home + power' and 'Vol down + home + power'. But the phone runs in infinite boot loop until i release the power button, after which it starts normally.
May be i should try this . But as per what i found in google search is that the 3 button issue was only in 2.1(Eclair). And mine is already on 2.2 (Froyo) which i updated officially through kies. So has it been disabled intentionally or the bootloader is buggy version which i need to update using this guide ??
try to hold the power button for 4 seconds exactly. Release it just when the logo screen disappears. Sometimes if I hold it too long, it doesn;t work.
Also, if your phone is working, try an app like QuickBoot that will take you into those modes automatically.
For some people have problems getting in to download mode, try volume down home and power it worked for me.
Download mode is Volume down not up .
jje
JJEgan said:
Download mode is Volume down not up .
jje
Click to expand...
Click to collapse
I tried both - Up & Dn. None of them is working.
rschenck said:
try to hold the power button for 4 seconds exactly. Release it just when the logo screen disappears. Sometimes if I hold it too long, it doesn;t work.
Also, if your phone is working, try an app like QuickBoot that will take you into those modes automatically.
Click to expand...
Click to collapse
I tried it, its not working. I release the power button exactly when the boot logo disappears. Then the phone boots again (boot logo is displayed again) and phone starts normally.
Also app like QuickBoot is not much helpful as i'm thinking of flashing through ODIN and i need both the modes working before starting the flash procedure !!
Front page post Download recovery jig .
Have you tried a factory reset .
Download mode is
Hold menu button hold Vol down
Press and hold power button
when screen boots to logo let go of menu and vol down button
Then power button .
jje
Sorry for hi-jacking ur thread,
I'm trying MIUI RC3c.
After flashing CM7 kernel, I was not be able to get into recovery mode to continue.
I held VOL UP + HOME + POWER & released when logo appear but screen came black. Only BACK and MENU buttons lit up.
Hope someone can help
Tks
JJEgan said:
Front page post Download recovery jig .
Have you tried a factory reset .
Download mode is
Hold menu button hold Vol down
Press and hold power button
when screen boots to logo let go of menu and vol down button
Then power button .
jje
Click to expand...
Click to collapse
Yeah i have tried factory reset. And i dont want to use the USB jig just now. USB jig is for emergency i suppose and u can only go into download mode and not recovery mode. I want download mode and recovery mode running normally. My question is that, i it possible that these two modes are disabled as mine is 3 UK branded phone ?? Should I try this ??

[Q] Can't enter download mode

Hello!
I have a Galaxy S Plus with stock 2.3.6 (XXKQ7). I want to install LionROM, but I can't enter the download mode. I hold home, vol- and on/off button but the phone only restarts... (before restart one or two pixels light up in the right corner)
Please help, thank you.
Hi,
i have a i9001 s+ 2.3.3 and to enter downloa mode you put it in usb debuging mode ( setings , application develipment, enable usb debuging ) then power off and hold down vol +, home button ( big one) and power button the the android logo with downloading... beneth it will come up and you are now in download mode
CdrGladius said:
Hello!
I have a Galaxy S Plus with stock 2.3.6 (XXKQ7). I want to install LionROM, but I can't enter the download mode. I hold home, vol- and on/off button but the phone only restarts... (before restart one or two pixels light up in the right corner)
Please help, thank you.
Click to expand...
Click to collapse
this should work
http://forum.xda-developers.com/showpost.php?p=19379942&postcount=5
Can you enter recovery? If not this is probably the same thing what happened to me.
Check this:
http://forum.xda-developers.com/showthread.php?t=1575680
And for full info a few posts after:
http://forum.xda-developers.com/showthread.php?p=24301242#post24301242
SGS+ trolling us

Bootanimation loop

Hello everyone.
I got a new Galaxy Ace S5830i today.
I rooted it and installed CWM (http://forum.xda-developers.com/showthread.php?t=1552792).
After that I did install Retribution beta 4 (http://forum.xda-developers.com/showthread.php?t=1806471).
Then after rebooting I ended up getting a boot animation loop and neither the recovery mode would work nor the download mode.
Could anyone of you please help me? I feel very uncomfortable with a brick in my pocket. :x
I'd be surprised if neither were working, particularly if you are getting as far as the boot animation.
To clarify, to enter recovery mode: Switch off your phone (pull out the battery and re-insert if its looping and the power button won't work), hold down power button AND home/rectangular button AND volume up button. When you see the Samsumg GT-S5830i logo, let go of the power button but continue to hold down the home and volume up buttons for around 5 seconds then let go of everything. Recovery console should appear on screen.
To enter download mode: Switch off your phone, hold down power button AND volume up button AND volume down button. Warning about custom OS's should appear, followed by download mode after pressing volume up again. If this doesn't work try taking out battery, sim card and SD card, connecting USB lead (screen will be completely powered off) and then trying the key combination.

Trying to hard reset my xt1068 kitkat phone, didn't show dead android guy at all.

My phone was frozen when I was taking a video,
then I forced restart the phone by pressing power button until it restarted.
However, my phone stuck at the android logo for a quite long time with the screen on, so I decided to do a factory reset.
I have tried the following steps on my friend's phone as we bought exactly same phone,
and succeded at first attempt.
1, volume down + power button goes into boot options.
2, then android logo, then about 2 seconds later, dead android guy would appear.
HERE is my phone's problem:
in this step after showing android logo, my phone would vibrate once and then just gone black,just like turning off. NO DEAD ANDROID GUY showed up. Certainly would not be able to do the rest steps.
I have searched and tried so many methods that others used when they could not get into the bootloader. NONE of them succeded.
So I need help, guys.
Anyone got any ideas.
Thanks in advanced !!!
no one ?
I guess I had to bring it to the store for repairing.
bluecard said:
no one ?
I guess I had to bring it to the store for repairing.
Click to expand...
Click to collapse
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
bitstra said:
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
Click to expand...
Click to collapse
post in right forum........... see my signature for 5.0.2 easy installer or search for my kitkat version in xt1068 forum

Categories

Resources