Hi,
I recently updated my phone through Kies to Firmware 2.1 update 1 after which whenever i have an incoming or outgoing calls, the volume is auto set to half the bar and is low however i can increase and it comes back to normal...this happens every single time a call comes in or when an out call is made...
There is no problem with the audio. Its just that every call i take or make, i have to increase to volume to full or how much ever i want - this was not the case before the update...
Any help would be super
Details:
Phone: Galaxy S GTI9000
Firmware:2.1-Update 1
Baseband Version-I9000DDJG4
Kernel version: 2.6.29 jh755.kim SE-S605 #2
Build: Eclair DDJG4
Go to settings - call settings - HAC mode - select on.
Sent from my SGH-T959 using XDA App
Hi laristech,
Note: Its Samsung Galaxy S from Indian market that i have...i understand they are other wise called fascinate and captivate etc..
Under call settings there are the following options
1. All calls
2. Voice call
3. Video call
4. Fixed dialing numeres
5. Voicemail
I did not see the HAC option...can you be more specific?
Thanks..
Related
With Eclair, transferring calls was super easy, just parked the first conversation, called the other one up, and pushed "Transfer" (or something similar).
It seems like this option is gone in Froyo, I can set up a conference call, but as soon as i hang up, it hangs up for everyone.
+1
Been wondering how to do this too, and so far no solution..
Anyone?
Sent from my GT-I9000 using XDA App
Call transfer seems to be only half-functional.
Here is how far I came:
1) call someone
2) add a call, dial the number
3) while still ringing select keys ("tastenfeld")
4) you will see that the green button in the lower left part of the screen reads "Send" now
5) push the "4" and "Send"
6) the call is beeing transferred
If the number you want to transfer to picks up before you can push the "4"+"Send" combination a conference call is established and I found no way to transfer the call from there.
I would be very grateful for s solution on how to perform a call transfer from within a conference call.
rgds,
sscala
Testet out another dialer today at work, managed to transfer a call by:
1. calling person #1.
2. switching to "dialer one"
3. calling person #2.
4. switching dialer
5. pressing "4", call button.
I'm guessing you can use "Dialer one" as default, but didn't really like it that much, so I'll just keep switching if I need to transfer anyone.
Still better than giving the incalling person the number, and asking them to call themself.
Edit: Didn't see previous post, basically the same method, but dialer one let you transfer calls after the 2nd person answers.
Any better solution when the second call is picked up?
Thanks
i am also looking for the solution to this problem
Cannot make or receive calls when bluetooth is on. When I turned off my bluetooth, a white screen will pop out saying calls not sent but immediately after it will make or received calls the number I just dialed when my bluetooth is on. My phone get sluggish for a moment after. I can listen to music without a problem. PLEASE HELP.
THANK YOU in advance.
rooted samsung galaxy note
Android version 2.3.6
kernel version 2.6.35.7-N7000XXKK-CL726566
baseband version N7000XXKK5
Hi guys i have the following problem with my p990, When i try to call somebody for a short time the Call Windows appears but it says that the Phone call to the following person ended, but the one i call gets my call and can pickup it and I also hear some of the words the other person says but without ability to control the call or hangup im just on the desktop...
But i am able to receive sms and i also have Mobile data access.
Here are my Phone settings:
Model: LG-P990
Android Version: 4.0.4 78-[email protected]
Baseband: 1035.21_20120521
Kernel: harsh 3.0.34-p990-ics
Prozessor: Armv7 Processor rev 0 (v7l)
Build Date: 14 Junge 2012, Number: IMM76l
TitusJonas said:
Hi guys i have the following problem with my p990, When i try to call somebody for a short time the Call Windows appears but it says that the Phone call to the following person ended, but the one i call gets my call and can pickup it and I also hear some of the words the other person says but without ability to control the call or hangup im just on the desktop...
But i am able to receive sms and i also have Mobile data access.
Here are my Phone settings:
Model: LG-P990
Android Version: 4.0.4 78-[email protected]
Baseband: 1035.21_20120521
Kernel: harsh 3.0.34-p990-ics
Prozessor: Armv7 Processor rev 0 (v7l)
Build Date: 14 Junge 2012, Number: IMM76l
Click to expand...
Click to collapse
1-test ril 218 v10d
2-test original rom
3-test only 2g ...and if the calling work in 2G send the phone in assistence and write defect no calling in 3g mode
regards
Hi,
I encounter sometimes this issue with my S3 4G/LTE i9305: Sometimes, when I receive an incoming call, the S3 vibes but not rings.
All others ringing notifications are played, the issue is just with the incoming call. No incoming calls are mist except if I don't have signal.
My configuration:
Phone
Model: GT-I9305
Android: 4.2.2
CM: 10.1-20130522-NIGTHLY-i9305
Baseband: I9305XXBLL5
Kernel: 3.0.64-CM-gba39955
Ringtone
I do some test using a default ringtone provided by CM to compare with my favorite ringtone (MP3).
I've encountered sometimes this issue with the default firmware provided by Samsung. This is one of the reasons why I flashed my S3 with CM 10.1.
Any idea(s) or way(s) to solved this annoying issue?
Is related with the baseband version?
PS: I've do a "trip" with the 48 pages speaking of Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help & Troubleshooting (http://forum.xda-developers.com/forumdisplay.php?f=1961).
Is related with the baseband version?
No unless the call itself is the problem .
jje
JJEgan said:
Is related with the baseband version?
No unless the call itself is the problem .
jje
Click to expand...
Click to collapse
And ... any idea on the reason?
dear all..
i have an issue for more than 2 month until now and i hope it just fixed.
my smartphone is galaxy s4 active, that i updated before a week to android L. - the problem date before this update and before kitkat update"
the issue that i cannot hear the dial tone, cannot hear the caller and the caller cannot hear me, that's if i make a call or receive it,
i try to
--reboot device.
--remove battery.
--change the sim card.
--removed SD card and that make my mobile hanging somehow!!
--disable google search, disable voice to text << these stuff i found from googling.
--wipe factory reset, wipe clear cash.
i try everything, so sometimes call fixed for just a one single call the re-come back again the issue until i found something, i did not enabled the mobile data for 3 days, and from that date until now i can call anyone and everybody can hear me well without any problem.
so the problem was from mobile data ! there's a conflict or i don't know??!!! .. so what's going with me, i cannot use my mobile data or the issue will come back again.
the calls from app like viber skype tango etc work well
any suggestions ??
btw, samsung support center in my country did not support my s4 active !! :'(