Related
I was reflashing my phone, while in download mode, the power went off, and now my phone won't turn on or anything. I think my phone is bricked.
I bought the phone a week and a half ago. Will AT&T accept my phone for a replacement if I say it just stopped working? I have the $4.99/month Wireless Insurance, but won't they deny it when they find out I've been messing with it? What should I do?
Thanks!
Before you take it back, make sure it isn't bricked. Remove the battery, replace it, hold both the volume buttons, plug in the usb and see if it takes you to download mode
Sent from my Samsung SGH-i897
Kaik541 said:
Before you take it back, make sure it isn't bricked. Remove the battery, replace it, hold both the volume buttons, plug in the usb and see if it takes you to download mode
Sent from my Samsung SGH-i897
Click to expand...
Click to collapse
It's bricked. Replaced battery, won't turn on no matter what I do to it.
There's a small scratch on the screen, and the micro USB charging port cover is messed up a bit from something sticky getting in there.
What should I tell AT&T? What's the likeliness of them declining my claim? Can they tell that it's been tampered with even though it's bricked?
Wrong forum. But I would use my insurance instead and tell them it just quit on me...
Try plugging into the computer, remove the battery reinsert the battery. Then hold volume up and power till red text comes on the screen from there switch to holding both volume buttons down and power then when the red text flashes to black release power and continue to hold both volume buttons. That should get you back to the downloading digger bot.
Tehwall said:
It's bricked. Replaced battery, won't turn on no matter what I do to it.
There's a small scratch on the screen, and the micro USB charging port cover is messed up a bit from something sticky getting in there.
What should I tell AT&T? What's the likeliness of them declining my claim? Can they tell that it's been tampered with even though it's bricked?
Click to expand...
Click to collapse
They won't give you a hard time on the software side - to them off is off - they can't tell if you bricked it - they will send it somewhere and have it flashed.
BUT - if there is something sticky in the USB port then they do have grounds to deny your claim - for all they know you poured juice in there.
Good luck.
Get it into download mode and flash it again with odin. Likely not bricked.
Sent from my SAMSUNG-SGH-I897 using XDA App
alphadog00 said:
They won't give you a hard time on the software side - to them off is off - they can't tell if you bricked it - they will send it somewhere and have it flashed.
BUT - if there is something sticky in the USB port then they do have grounds to deny your claim - for all they know you poured juice in there.
Good luck.
Click to expand...
Click to collapse
If there is something sticky there it means he put something sticky there lol.
And also, follow thedamn directions people are giving you man. Your phone isntbricked, I dont even know of anyone who has bricked their phone yet..
Mattwp103 said:
Try plugging into the computer, remove the battery reinsert the battery. Then hold volume up and power till red text comes on the screen from there switch to holding both volume buttons down and power then when the red text flashes to black release power and continue to hold both volume buttons. That should get you back to the downloading digger bot.
Click to expand...
Click to collapse
votum said:
If there is something sticky there it means he put something sticky there lol.
And also, follow thedamn directions people are giving you man. Your phone isntbricked, I dont even know of anyone who has bricked their phone yet..
Click to expand...
Click to collapse
I tried everything suggested, nothing happens. The power went out, while flashing new firmware, now the phone won't turn on no matter what I do. I already tried peoples suggestions.
Tehwall said:
I tried everything suggested, nothing happens. The power went out, while flashing new firmware, now the phone won't turn on no matter what I do. I already tried peoples suggestions.
Click to expand...
Click to collapse
The AT&T screen doesn't come up?
Guys we have been told a gazillion times about this...what does this have to do with Development?! Jesus....
Which firmware were you using at the time and which one were you flashing?
also make sure the battery is charged
prestopasto said:
The AT&T screen doesn't come up?
Click to expand...
Click to collapse
Nothing does, I tried every combo, SIM card in and out, replacing battery, USB plugged in and out, download mode, regular power button, recovery mode, what the guy suggested above; everything.
Not a single thing shows up on the screen.
You glanced over my question.
The version of firmware you were using before the flash and during the failed flash can be very pertinent to the key combination you need to get into download mode =P
Zilch25 said:
You glanced over my question.
The version of firmware you were using before the flash and during the failed flash can be very pertinent to the key combination you need to get into download mode =P
Click to expand...
Click to collapse
I had the stock firmware, installed the JM5 firmware, reinstalled the JM5 firmware, while doing so, they power went off.
Just pressing Volume Down + Power got me into Download Mode everytime.
Edit: And yes, the battery was charged, it was at about 67% when I was flashing the firmware. How can I charge the battery for the heck of it when the phone is dead? Normally when you plug in the USB cable there's a charging animation on the screen. Nothing comes up at all, can a dead phone charge a battery, or does the software need to send the power to the battery?
Honestly I've had flashes fail at varying points during the flash and I've gotten the black screen before, ALWAYS I've been able to get it to work by following these steps:
Pull out everything, SIM, SD, Battery, USB, EVERYTHING
Close Odin (If it's open)
Reopen Odin
Insert battery, hold vol down (If this doesn't work hold both volume buttons NO POWER)
While holding the button(s) plug in USB
Don't touch the power at any point, if this fails and you want to try the other key combo, start the process over completely.
Zilch25 said:
Honestly I've had flashes fail at varying points during the flash and I've gotten the black screen before, ALWAYS I've been able to get it to work by following these steps:
Pull out everything, SIM, SD, Battery, USB, EVERYTHING
Close Odin (If it's open)
Reopen Odin
Insert battery, hold vol down (If this doesn't work hold both volume buttons NO POWER)
While holding the button(s) plug in USB
Don't touch the power at any point, if this fails and you want to try the other key combo, start the process over completely.
Click to expand...
Click to collapse
This man speaks the truth, listen to him.
If your insurance covers damage then destroy the phone and call att and tell them its been destroyed.
if not then it is possible that the power outage could have caused your phone to zap.
Flashing or not if you spilled stuff into the usb port your screwed. Week and a half and you scratched the screen and did that? I have tried to scratch mine with no succes. I say ditch that phone and get a GO phone. And have a mod delete this pointless thread already!!!!
Hey guys I think I actually did it. I was going to install the JPC Froyo Rom, and somehow booted into recovery in the ROM. Now whenever I turn the phone on it boots into recovery, and none of the button combinations work for putting it into Download mode so I can flash back to stock. On the i9000 thread it says that if you get into this situation you cannot flash back. Any of you guys run into this issue? If not then it looks like I'll be trying to convince an ATT rep to give me a new phone
Try powering off... Then hold vol up and down buttons then plug in usb.... That happened to me... Your not bricked
Sent from my SAMSUNG-SGH-I897 using XDA App
Connect to adb and run reboot command
Sent from my GT-I9000 using XDA App
Nope
Nope sorry guys I know all of what you just said. As for plugging in USB while holding volume buttons, it'll just go to that battery charging screen, and adb doesn't work because it doesn't boot past recovery. Sorry guys but yes it was bricked. It's okay though because I just went to ATT and since they can't identify the problem they just replaced the phone
Thought mine was bricked one night, too. Same scenario. Tried dropping the SIM and SD card out even though I didn't think it would make a difference, but it did. Got to download screen and reflashed with ODIN.
Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
KCutrer1 said:
Nope sorry guys I know all of what you just said. As for plugging in USB while holding volume buttons, it'll just go to that battery charging screen, and adb doesn't work because it doesn't boot past recovery. Sorry guys but yes it was bricked. It's okay though because I just went to ATT and since they can't identify the problem they just replaced the phone
Click to expand...
Click to collapse
If you pull the battery, then put the battery in. hold both volume buttons buttons, and then plug the phone into the computer, it didn't boot to download?
Im curious if you even tried to use the Odin one click thread
There are 4 or 5 ways in that thread on how to get to download mode. And how exactly does this relate to development...just another curious thought. Well, you are getting a new phone, just hope that ATT or Samsung don't try to figure out the cause of your phone being "bricked".
AGAIN!
Okay after this I swear I won't be messing around with Froyo anymore. Here's the story: I got into download on the replacement captivate. Tried to install JPC froyo, but it never started flashing so I unplugged it from Odin and then tried to turn it back on. It goes to the normal "connect phone to computer" screen. However no attempts to get back into download mode have worked. Holding both volume buttons and power until second black screen doesn't work, booting while holding volume down doesn't work, holding both volume buttons and then inserting USB cable doesn't work. I think I'm stuck in this screen unless there's some incredible way I have yet to try. Anybody have any ideas? I would greatly appreciate feedback from the experienced users (Zilch25, designgears, kaik, reaver117), because I think I'd be pushing it trying to get it replaced a second time in such rapid succession
To flashman2002:
I put it in this section because it's in the development section that most flashing and such occurs so I thought there would be the greatest knowledge base. And yes I've pored over the one click thread and none of the methods mentioned there have any effect!
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
ThisWasATriumph said:
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
Click to expand...
Click to collapse
Nope. Unless you can do this with godly speed I dont think it'll work. I just got to the "Connect Phone to Computer" screen again.
You had the usb in before anything appeared on the screen right?
ThisWasATriumph said:
You had the usb in before anything appeared on the screen right?
Click to expand...
Click to collapse
Yeah originally. I can get to that screen now by just putting the battery in and holding power button. It seems to behave exactly like it normally would, just can't get out of it.
What screen? The screen you want has a big yellow triangle and says download.
ThisWasATriumph said:
What screen? The screen you want has a big yellow triangle and says download.
Click to expand...
Click to collapse
No it's on the phone...!...computer screen. That's what I'm saying, it's been stuck here for a while and none of the methods described on the one click thread work. I've been here before and just holding volume buttons and holding down power for it to boot twice and releasing would do it. Not so anymore. Can't get into download mode doing anything!
Well I read In the SRE thread I think that there are reports of newer phones not responding to any button combos. Bad batch they said not on purpose...
Also for the i9000 apparently you only have to hold the down volume key so since you flashed a i9000 rom try that if you haven't already.
You cant get into recovery right? Just holding volume and power then letting go of power after a bit?
Adb reboot download...
Sent from my SAMSUNG-SGH-I897 using XDA App
ThisWasATriumph said:
Well I read In the SRE thread I think that there are reports of newer phones not responding to any button combos. Bad batch they said not on purpose...
Also for the i9000 apparently you only have to hold the down volume key so since you flashed a i9000 rom try that if you haven't already.
You cant get into recovery right? Just holding volume and power then letting go of power after a bit?
Click to expand...
Click to collapse
Nope none of it works. I just got it replaced less then 3 hours ago and I already bricked it. I hope somebody finds out something that'll get this fixed. Maybe some way to force download mode through a computer application or something.
Well theres adb like mentioned above but im pretty sure that requires at least recovery mode working.
Like i said before i was stuck on the same screen so maybe theres still hope.
If all else fails someone will figure out how to JTAG these things eventually...
ThisWasATriumph said:
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
Click to expand...
Click to collapse
I know it doesn't help you out now, but when you remove the lag fix, just leave it set on the black screen. It's doing its thing. It will reboot when it's done. The home keys should still light up if you press them in this state...
Well thanks for your input anyway guys. Hopefully somebody figures something out. For now I guess I'll keep the SIM in my old iPhone 3G so I at least have a phone. Tomorrow I'll go to another ATT store in my area. Chances are the rep won't know what the hell that screen means and will replace the phone promptly.
Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
same here. no button combo method that previous worked is working now. :/
OP, did you see this thread: http://forum.xda-developers.com/showthread.php?t=775911
not working for me, but maybe it'll help you ... ?
Tremere said:
Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
Click to expand...
Click to collapse
You may also want to try removing and then reinstalling the Samsung USB drivers on your PC.
I've verified there is simply no USB device being registered no matter what OS, the phone is just sucking power.
@The_Bishop: Did see that, exactly the same as yours, plug usb in, get that screen
Anyone want to be awesome and send my Capppy back to Samsung on my behalf?
best method that never dies when i was in your situation......
unplug usb, turn phone off, then put battery in, turn odin on, now hold volume buttons ONLY then insert usb in phone, you will see download mode with odin identifying the port;
hope it worked ?!?!?!?
Believe me I have tried everything. There is simply was and still is no way to enter recovery or download mode on this phone. Its hardware locked!
a little off topic, but how do i find my phones "bat build date" ?
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
YoungGun821 said:
a little off topic, but how do i find my phones "bat build date" ?
Click to expand...
Click to collapse
Is on the underside of the battery, one facing into the slot.
i.e 2010.08.13
terrigan said:
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
Click to expand...
Click to collapse
Done that. Exactly what happens in video. Both volume buttons down, plug in usb.. no response, just brick screen.
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
terrigan said:
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
Click to expand...
Click to collapse
I did try once or twice. From another thread it was also said to disable driver verification on windows startup for x64 machines. which I also did.
Basically I want to hear from someone who:
a) has a captivate that could never enter dl/rescue via buttons, only adb
b) captivate didn't trigger a plug in 'ping' from Windows until they ??
FYI this is a Macbook Pro, and I booted into Win7 x64 Pro for flashing.
Hi I have the same problem..
What I did was this rooted with one click.. loaded Cognition 2.1.6 all was good..I saw the froyo so I thought lets try it. so opened up ODIN put it in recovery mode. with ADB could never get it in the button way.. it started to load and it froze. I didn't disable voodoo and IS THAT WHY I AM STUCK? I have tried every combo changed drivers computer will not see the phone.. is it a AT&T Phone
IS there anyway to fix it?? or can someone make a program to fix this? I would make a big donation if they did!!!
Thanks Forum!!
Yeah I had it in adb mode to enter download mode, maybe that is why it won't start back up.
I've now given the phone to a local mobile repair business, if riffbox or someone comes out with a Captivate rescue soon its probably as a end result of me
I sent mine back to Samsung as well. BTW, I have a battery from 2010.08.12 so I might be in the same boat. Wish I'd have used one of my OEMs to see if that made any difference, but I did not. :/
I have the same issue.
Rooted my phone through adb, which was fine. Couldn't get into recovery/download modes with hardware before then.
Now my phone is bricked, and not detected or even charging via USB.
wtf
If the repair shop cant fix it try this:
1.) Remove Battery, SIM Card and External SD
OR
2.) Press and HOLD VOL UP AND DOWN with USB inserted and THEN slap in the battery.
This worked for me, for some reason inserting the battery last did the trick.
Let me know if anyone finds a solution to this I have tried it all and my computer will not detect my phone. Has Samsung blocked this in there firmware?
Did you try what I posted above?
yep nothing if I could get it to detect in command prompt I could force it but it won't... the button thing didn't even work when the phone worked!
So ....
My captivate was running Cog 2.2 Beta5.5. I tried to undo lagfix before updating to beta6, but it failed. So I decided to flash back to stock 2.1 then upgrade to Cog.
Problems appeared when Odin stopped at setting pit file. This happened several times before so that I unplugged my phone and tried to get into download and flash again. However, the volume button combination does not work this time. So I could not flash the phone again.
The current status of the phone is:
No AT&T screen at startup, just displays the phone and computer
Cannot enter downloand mode by holding down both volume button then plug-in cable
and obviously the computer does not recognize the device when connected.
Is there still a way to get the phone into download mode (or anything else that could unbrick it)?
Thanks a lot!
just keep at it. it will work eventually. not bricked...
jhnstn00 said:
just keep at it. it will work eventually. not bricked...
Click to expand...
Click to collapse
Yeah it should be recoverable but I'm wondering what I can do with the phone as I cannot access download...
loserskater said:
I had this problem a few days ago after updating to 2.2. I tried every single button/usb/battery combo and nothing worked. FORTUNATELY I was within 30 days of purchasing it (I guess there's a silver lining when diving right into "hacking"), and I brought it to the store with the box and receipt and just told them it gave me an error when turning it on (played dumb) and they swapped it out without even testing. If you're over the 30 days then I think you're pretty much SOL... gotta pay for a replacement.
Click to expand...
Click to collapse
10 Char...
amtrakcn said:
Yeah it should be recoverable but I'm wondering what I can do with the phone as I cannot access download...
Click to expand...
Click to collapse
just pull the usb from the phone & the battery, replace the battery, then open odin 1 click, then hold both vol buttons, while holding the vol buttons, insert usb.
repeat till it gets into download mode. sometimes I walk away for a few minutes, then try again. suddenly it works. make sure you use the usb port that works for your phone, on my netbook only 1 of the usb ports works for the phone.
1. Unplug USB
2. Pull battery
3. Put battery back in
4. Reconnect the USB
5. Open odin one click
6. Wait for battery icon to show
7. Hold Volume up & Down and power
screen will go to att screen, or computer + Phone screen. Then it'll go back to the battery screen. Keep holding till you see it go black again, Then let go of power, still holding volume keys.
That should do it. Keep trying you'll get the hang of it quickly.
jhnstn00 said:
just pull the usb from the phone & the battery, replace the battery, then open odin 1 click, then hold both vol buttons, while holding the vol buttons, insert usb.
repeat till it gets into download mode. sometimes I walk away for a few minutes, then try again. suddenly it works. make sure you use the usb port that works for your phone, on my netbook only 1 of the usb ports works for the phone.
Click to expand...
Click to collapse
It's still not working after I repeated for 60 times
Maybe I should leave it for a while then keep trying...
rob989_69 said:
1. Unplug USB
2. Pull battery
3. Put battery back in
4. Reconnect the USB
5. Open odin one click
6. Wait for battery icon to show
7. Hold Volume up & Down and power
screen will go to att screen, or computer + Phone screen. Then it'll go back to the battery screen. Keep holding till you see it go black again, Then let go of power, still holding volume keys.
That should do it. Keep trying you'll get the hang of it quickly.
Click to expand...
Click to collapse
This look like the key combination to enter Rocovery mode
My phone does not show the battery icon now. After applying step 4 the computer+phone screen comes up.
Nope, it's for download. Trust me, I've had to do it enough. That's ok, you can follow the same steps from the phone+PC screen. Just let it go black, then back to the screen, then black a second time before letting go.
Again, USB MUST be plugged in at this time for it to work.
rob989_69 said:
Nope, it's for download. Trust me, I've had to do it enough. That's ok, you can follow the same steps from the phone+PC screen. Just let it go black, then back to the screen, then black a second time before letting go.
Again, USB MUST be plugged in at this time for it to work.
Click to expand...
Click to collapse
Thank you.
BTW how many times of reboot before u got into Download?
Two questions:
Have you been able to use the three button method to get into download or recovery before now?
Did you ever apply the JH7 firmware OTA update from AT&T to your phone?
Sent from my SAMSUNG-SGH-I897 using XDA App
Basically let it reboot once and as soon as the second time comes that's when you let go of power. Previous poster has a good point too, some firmware updates are known to "break" the 3 button combo.
Have you pulled the SIM and any SD card you have installed? Try that too. I couldn't get it into download, then pulled everything out, put battery in, started up ODIN, held in vol buttons, inserted USB and yay, fixed.
If you open ODIN while phone is connected or disconnect then reconnect USB while ODIN is open, you will never get it right, FYI...
I had to do it with ODIN opened first, then volume buttons, then USB. Any screw ups and you have to start over.
All cards were removed and I used the original cable as well but I still could not get out of the phone and computer screen...
Shipped the phone for exchange...
Might have been able to get into download mode by holding the volume buttons inserting the USB and popping the battery back in.
That's how I got lucky today.
Sent from my SAMSUNG-SGH-I897 using XDA App
need help iv got the phone-!-computer icon cant get into recovery mode, can get to download mode Odin detects but just says.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
just sit there.
what can you do if debug mode is not enabled.
used odin before with out problem..
need help last captivate bricked during jh7 ota update att fault, revived refurbished model from att. was restarting after phone required restart and it just sat there for ever then went black now that stupid icon is there.
ebkrod said:
need help iv got the phone-!-computer icon cant get into recovery mode, can get to download mode Odin detects but just says.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
just sit there.
what can you do if debug mode is not enabled.
used odin before with out problem..
need help last captivate bricked during jh7 ota update att fault, revived refurbished model from att. was restarting after phone required restart and it just sat there for ever then went black now that stupid icon is there.
Click to expand...
Click to collapse
which ODIN are you trying to use?
if you are using regular ODIN and not one click, are you giving it the files it needs to flash or are you leaving everything blank?
if you are using one click or regular, make sure ODIN is open first!
jhnstn00 said:
just pull the usb from the phone & the battery, replace the battery, then open odin 1 click, then hold both vol buttons, while holding the vol buttons, insert usb.
repeat till it gets into download mode. sometimes I walk away for a few minutes, then try again. suddenly it works. make sure you use the usb port that works for your phone, on my netbook only 1 of the usb ports works for the phone.
Click to expand...
Click to collapse
rob989_69 said:
1. Unplug USB
2. Pull battery
3. Put battery back in
4. Reconnect the USB
5. Open odin one click
6. Wait for battery icon to show
7. Hold Volume up & Down and power
screen will go to att screen, or computer + Phone screen. Then it'll go back to the battery screen. Keep holding till you see it go black again, Then let go of power, still holding volume keys.
That should do it. Keep trying you'll get the hang of it quickly.
Click to expand...
Click to collapse
You guys have no idea how much I love you right now!!! I tried following the directions in another thread and it was total fail!! I was about to give up and go back to my iphone when I decided to google again and found this! Clear and concise!!
*bows in the shadow of your awesomeness*
Thank you!!
Download Mode
Ok guys I think I found something that we were missing. There is a little brass "button" its about the size of a ball point pen. If you have the battery case off then the button is not "pressed". What I did was push the button in. Hold down up and down then insert the usb cable and BAM download mode.
Just an fyi. It worked for me to get into download mode.
Riley
I'm trying to unbrick my phone too. All I get with the Odin One-Click is "Get PIT for mapping..." It stays there forever. Someone help please.
So I was attempting to flash back to stock with Odin (I was using Assonance 5.2). I turned the phone off, then while holding the volume buttons plugged in the USB like normal. Then Odin said added the phone, then I hit start. And it seemed like it was working just fine, then all of a sudden the screen on the phone turned red. Then the status bar on Odin stopped moving completely (stayed for awhile). So I think I made the next big mistake of just disconnecting the USB and taking out the battery. So now the phone won't turn on. So I'm not sure I hard bricked the phone or what? Anyone have any idea? Thanks!
I've plugged the phone into the outlet charger, still nothing happens. This happened like maybe 15 min ago. No action when plugged in the computer or charger. Can't even boot into recovery I don't think. the power button was giving me some trouble earlier today. whenever I was trying to wake the phone up, it seemed to take a few clicks of the power button to wake the phone. This happened only after I flashed Assonance 2.5, so I wanted to flash to an earlier version of the rom. thanks!
What you want to do is get into Download Mode, and flash with Odin One-Click JF6 to get your phone working again..
Have you tried all the various button combos to get into Download Mode? .
If the button combos don't work, you can always try to build/buy a JIG which will force your phone into Download if it's still possible on your phone.
I've tried to get into download mode, but can't seem to do it. I've tried holding the volume up and down button then plugging in the usb (which didn't work). then i tried the taking the battery out, then holding the volume up and down button and power button, then plugging in the usb, then reinserting the battery, then taking my hand off the power button (which didn't work). what is the JIG method?
edit. ok i have no clue wtf just happened, but i am currently in download mode using odin and flashing back to stock.....this is just too weird.....sooo any rom suggestions?
Look in my signature for an example of a JIG.
norcal einstein said:
Look in my signature for an example of a JIG.
Click to expand...
Click to collapse
cool i'm actually gonna go ahead and get one this things......JUST in case of future screw ups that don't have a happy ending
i clicked on the link but it won't let me go the page. below is the message it gave me.
marefin, you do not have permission to access this page. This could be due to one of several reasons:
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
marefin said:
cool i'm actually gonna go ahead and get one this things......JUST in case of future screw ups that don't have a happy ending
Click to expand...
Click to collapse
Definitely a great idea having the jig. Nor cal can attest to the late night save that jig provided me.
Sent from my SGH-T959D using XDA App