I would really appreciate some help because i really need to fix the shift because it is now my primary PC and i am not in my home country :/.I have liberated it but tried also to HARDSpl it with the hardspl package but failed in the process.Today i tried to install the cab from this thread "GPS under snapvue working!!!!!!!!" (xda doesn't let me post the link) and snapvue immediatly stuck and after soft reset never worked again(black screen),i tried to flash other roms(in hope that the device was hardspld or something)i also did the hard reset procedure with ecshift.exe and mtty but again nothing! i lost sound on windows also(which is more important than winmo for me).At this moment i have dual boot win xp and 7 and liberated snapvue.any help to revive snapvue and sound will be really appreciated!
Hey, don'y worry friend! Use mtty and ecshift to restart your snapvue side! It's simple, check the step-by-step guide in shiftwiki, it must work!
Problem solved by cmonex original cdma rom flashing.Thanks for the help!Thread closed.
Closed as per OP request
Related
Ok to help the new users on this site iv decided to put toghther a guide on how to liberate > hard spl > flash Rom for your shift.
Step one
liberate your HTC shift
heres some great instructions with a video of the whole process
http://www.modaco.com/content/forum/266537/View-Topic/
at this stage you do not need to go an install IE/Office etc you just need to liberate the device so you can use the USB tools.
step two
make sure USB tools is working run this on your Snapview side and on vista windows mobile device centre should open up and ask you to link your device(no harm i followed through and unticked all boxes.
step 3
follow these instructions on this thread to hard spl your device.
(now at this stage when you are following these instructions make sure on your snapview side that you have disabled your modem and USB tools is running and you have the 2 arrows at the top)
on vista side make sure your device centre has picked up your device. Also do not have any USB devices connected to your shift (as this causes a problem and hangs with a disabled USB message!!!)
follow these instructions---
http://forum.xda-developers.com/showthread.php?t=406606
Step 4 (almost there)
download a rom of your choice
my current fav is i00's rom
http://forum.xda-developers.com/showthread.php?t=480525
extract the rom you should have 2 files in the folder
CustomRUU.exe
RUU_Signed.nbh
if you can only see one file open winrar and then go through win rar to extract -
run the .exe adn thats it.
if it fails ....
on vista bring up comm manager click on advance and reset snapVue
check to see if its restarting and then restart vista
now first go into vista
launch device windows mobile device centre
click on mobile device settings
connection settings
untick allow USB connections
now go into snap view run USB TOOLS
give it a minute
go back into vista
run the rom update......
if you follow this through each stage the steps will make sense to you eg USB tools etc
good luck
__________________
Thanks, added to Shift FAQ
dear i need your help
i hope you can
i will be so greatful for you so much
i did all the steps above with every thing ok
but the last one i could not flash a new rom
from here
http://forum.xda-developers.com/showthread.php?t=480525
Update 20090307
Update 20090309
i did try every thing but the CustomRUU.exe file could not run
i do not know why is that
i really think that i have tried everything
but for sure i have been missing something
would you please tell me the steps or what to do ?
N2h said:
Ok to help the new users on this site iv decided to put toghther a guide on how to liberate > hard spl > flash Rom for your shift.
Step 4 (almost there)
download a rom of your choice
my current fav is i00's rom
http://forum.xda-developers.com/showthread.php?t=480525
extract the rom you should have 2 files in the folder
CustomRUU.exe
RUU_Signed.nbh
if you can only see one file open winrar and then go through win rar to extract -
run the .exe adn thats it.
if it fails ....
on vista bring up comm manager click on advance and reset snapVue
check to see if its restarting and then restart vista
now first go into vista
launch device windows mobile device centre
click on mobile device settings
connection settings
untick allow USB connections
now go into snap view run USB TOOLS
give it a minute
go back into vista
run the rom update......
if you follow this through each stage the steps will make sense to you eg USB tools etc
good luck
__________________
Click to expand...
Click to collapse
i did solve it
you have to run the file by clicking right click on the file and run as adminsterator
HTC USB Tool
I cannot attach the unit, is there a proces to troubleshoot the usb tools
on the vista side in comm manager make sure that you have turned off wifi - modem - bluetooth, then click on advance and reset snapview, then reset vista and try again once its all loaded up, if it still does not work, uninstall mobile device manager on vista and reinstall again, treat it exactly the same as if you where having issues trying to connect your phone via cable to your laptop/pc....
Is there a Hard SPL for the CDMA Shift ? Do any of the cooked roms work in the CDMA version ?
HELP ME
excuse me for bad english
then
- i liberate the snapvue
- i hard spl my device
snapvue is as after hard reset
i havent usb tool
how to connect snap vue to vista
i must liberate again ?
i'm in a loop
in fact custum ruu does't open
HELP ME
Same problem with me too...Please help us.
Same problem with me too...Please help us.
albyboy said:
HELP ME
excuse me for bad english
then
- i liberate the snapvue
- i hard spl my device
snapvue is as after hard reset
i havent usb tool
how to connect snap vue to vista
i must liberate again ?
i'm in a loop
in fact custum ruu does't open
HELP ME
Click to expand...
Click to collapse
always back to initial snapvue after hardSPL
Hi, same kind of situation here.
I have a problem when trying to HardSPL my shift:
rom version 1.30.414.1 wwe
rom date 02/26/08
radio version 1.58.21.23
protocol version 25.65.30.04H
liberated, UsbTool & SoftReset work well
IE, office mobile, total commander, notes installed & work fine
enableRapi OK
but when proceeding with ShiftHardSPLFinal, when it flashes, It goes from 0%
to 100% within 2 seconds and after the shift reboots, I have the original snapview !!!!!
I did it 3 or 4 times, same result.
followed http://forum.xda-developers.com/showthread.php?t=406606&page=16 post # 158 - Cmonex: took battery out, and post # 160 - KOS : uninstalled Origami, disabled UAC,
still same problem : instant install of version 1.00xxx, and ......... back to initial snapvue, ( not liberated)
would you have any idea ???
thanks for your help
dude if it goes from 0-100 in a few secs may be it was a correput download- re download and try again-
sorry cant be more help at the moment - i no longer have a shift-
N2h said:
dude if it goes from 0-100 in a few secs may be it was a correput download- re download and try again-
sorry cant be more help at the moment - i no longer have a shift-
Click to expand...
Click to collapse
Thanks I had not thought about this possibility, too much focused on complex possibilities, I will try again.
vilus said:
Thanks I had not thought about this possibility, too much focused on complex possibilities, I will try again.
Click to expand...
Click to collapse
EDIT: nope, with freshly downloaded ShifthardSPLfinal file, same problem.
vilus said:
EDIT: nope, with freshly downloaded ShifthardSPLfinal file, same problem.
Click to expand...
Click to collapse
Hi all, sorry for my english.
My experience is almost the same. In my opinion the HSPL process is not progressively indicated, but it happens regularly. Moreover, an hard reset follows the precess, thus, at the end, me too found WM in factory default mode. I liberated WM again, but till now i wasn't able to flash another ROM just to check if my Shift has been HardSPL'ed.
After many days without sleeping , i've just made the first call with my shift. Thank you, thank you and thank you.
we are waiting for keyborad solution, it's AZERTY but it shows QWERTY when typing.
Thank for all you did, you do and you'll do for us.
HELP!
I have been searching for possible solutions but cannot find one. Is it possible to Liberate a shift without a working sim card. I left ATT for Sprint years ago, so I do not have an active sim card.
Hi
I'm following Crackwhore's excellent guide to try and flash my Blackstone to WinMo 6.5. So far I've succesfully dealt with the whole USB driver problem (I'm running 7 x64), and I can get my phone to load USPL, but I can't seem to get the next bit right. I've downloaded Miri's 6.5 ROM, what do I do next? I tried running the BlackstoneRUUWrapper.exe with the phone connected in bootloader mode - it didn't work. Neither did the HSPLWrapper_Blackstone_156OliNex.exe file suggested by the guide. It says in the program that I should be connected with ActiceSync, is this actually the case? Sorry for this confusion, I'm sure it's simple when you know how...
Thanks
Fredley
Have you disabled the active sync in the PC ?
You have to go to the Windows mobile device center and disable allow USB connection i think. Then when your screen says USPL (the color screen) connect to the PC, it should display USB on the display, after that execute the BlackstoneRUUWrapper.exe. Don't forgot the Hard Reset after flash (power up with both volume buttons pressed).
I think I'm fine now, sorry for that. My problem was not going through the whole USPL process before trying to flash a ROM. I am loading the ROM now, fingers crossed!
fredley: Glad to hear it's sorted.
In future, please use the sticky guides to post questions. You actually get better exposure there. Crackwhore and Fallen sparten (and even me sometimes ) follow those and reply quickly.
Thread Closed
Dave
After flashing radio 1.27 I can't get Snapvue working again.
Reinstalling Vista didn't help. Even the sound doesn't work in Vista.
Ecshift and mmty don't help to reset the system.
Can't get SoftSPL installed.
somebody any idea?
Did you HardSPL before you flashed the radio?
Re-installing Vista wont help with the WinMo side.
what threads did you read ? What exactly did you try
Before people are going to put in the effort, please help us help you..
Which threads on this forum have you read about this problem ?
And what actions (eg command sequences) did you try to get
your shift working again?
---
My best bet is that you should use ECshift.exe /bl to get to the bootloader,
then flash ThaiHugo's radio and then his ROM. Should work.
P.S. forget Vista on your Shift, really if you can afford it, use Windows 7 ultimate and use SD card for "readyboost"
lucid said:
Before people are going to put in the effort, please help us help you..
Which threads on this forum have you read about this problem ?
And what actions (eg command sequences) did you try to get
your shift working again?
---
My best bet is that you should use ECshift.exe /bl to get to the bootloader,
then flash ThaiHugo's radio and then his ROM. Should work.
P.S. forget Vista on your Shift, really if you can afford it, use Windows 7 ultimate and use SD card for "readyboost"
Click to expand...
Click to collapse
Thx for helping me with this item.
I had a good working gullum rom with wm 6.5
then the phoneconnection couldn't anylonger be established.
so I flashed radio 1.27
since then I have a black screen..
I went to all the proposals given in the threads about black screen in snapvue.
Didn't first knew that installing Vista aknew didn't help me on the WM side.
Know it by now, since a few weeks ago.
Have installed both Vista and Windows 7
Both do have soundproblems.
Flashed after your proposal yesterday
- ShifthardSPLfinal
- radio 1.27 rad
- the light rom
No working screen.
Should I still try another radio?
Which one? Could you give me a linl?
HardSPLed again.
had a look with mtty info 2
It was!
Flashed radio.
Then thaihugo's ROM Full.
Black!
Is there another way to reset SNAPVUE? Or have a look inside to "see what is wrong"?
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
rglive2008 said:
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
Click to expand...
Click to collapse
First of all this is Android development so this is very offtopic. Second you hopefully can find and download the correct WM version from HTC by entering your S/N. Then I think all you need to do is to hold camera button + reset the device to enter SPL, connect to computer with USB cable and then run the installation (that you downloaded from HTC).
Hi Kalit_Kaffe, Thnx for the Help. Was helpless...thts Y had to post it here.
Anyways...is the hard reset(holding camera button...the soft buttons and stylus) the same as Factory restore??...then i wouldnt be needing the file that you mentioned for download??
Am i right?
Reset to factory defaults will not replace the 6.5 rom you have installed, you don't need to HardSPL again, that only needs to be done once.
Your best option would be to get a stock rom from the XDA Wiki pages, My advice would be either get a shipped rom that matches your carrier, or the latest generic HTC shipped rom, both can be found here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Note that once you flash a rom a Hard reset does not remove it, only flashing another rom will do that. Also flashing a stock rom is actually one of the best ways of clearing out previous flashes.
hi
Hey man thnx a lot! really helps!
HELP!!!!!!!!!
How do I install the USB driver for HTC TyTN II, to whom I am the Android 1.5. Before that I was a Windows Mobile 6.5 and am using Microsoft ActiveSync. I would like again to get back to WM 6.5, but can not seem to connect mobile phone and computer.
You can't flash back to Windows Mobile through usb while in Android because of the driver issues. You have to either enter bootloader mode and flash, or you have to do it through your storage card. And before you post back asking me how to do that, use the search. There are instructions all over the place.
thank you very much I was able through bootloader mode
does anyone know what is the best WM for HTC taytn 2? I am installing TPC_Kaiser_Titanium_Ultimate_28002, it's not something particularly good
There is no *best* ROM. Please read threads and flash based on your needs. I think it's about time this thread be done for.
rglive2008 said:
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
Click to expand...
Click to collapse
Looks like you need to downgrade your Hard SPL for WM6 so that it doesn't pause a lot.
http://forum.xda-developers.com/showthread.php?t=498320
Also there seems to be a guide for what you want. Sorry I stopped reading through the threads when I saw someone say you don't need to do anything with your hard spl.
http://forum.xda-developers.com/showthread.php?t=335568
Please, I tried loading Android on my At&t Tilt, and it wasn't successful, so I decided to switch back to Win 6.5, but could not load beyond
"Smart Mobility"
R 1.70.01iNex
G 25.65.30.04H
D 1.56.00.00
Please, I'll appreciate your help and concern. I've spent more than 10 hours trying to fix it using most of the thread posts.
I will love helpers to be specific on how to change back to win 6.5, and the complete tools for making android work on it.
I will also love someone who can help me through chat page on facebook or yahoo. My id is tundelogic for both. Thanks in anticipation and God bless you.
If I understand correctly, you've installed Android into NAND and later WM 6.5. In this case you must firstly install original WM 6.1 and only then WM 6.5
Infosoft.lt said:
If I understand correctly, you've installed Android into NAND and later WM 6.5. In this case you must firstly install original WM 6.1 and only then WM 6.5
Click to expand...
Click to collapse
I tried installing android, but it didn't install, after much trial, I felt switching back to WM ROM will work for me.
Please, don't be annoyed can u please post links of all I'll need to get my phone back to WM 6.1. i.e
Hard SPL to be used, Radio to use and Rom to use. I appreciate your response. Thank you.
> HardSPL 3.56 (force USB) / or you can use 3.34
http://forum.xda-developers.com/showthread.php?t=498320&highlight=Hard+SPL+3.56
> Radio 1.71... (actually I've never had any problems with other versions, but 1.71 is the newest).
http://forum.xda-developers.com/showthread.php?t=393182&highlight=Radio (post #3)
> Official WM 6.1
http://forum.xda-developers.com/showthread.php?t=439408&highlight=Kaiser+WWE+6.1
Because there were some problems for you while trying to flash Android, I recommend firstly to enter bootloader (hold Camera + Power buttons together and reset with stylus (button for reset is near miniUSB port; just put stylus in it and push for a few seconds); you'll see tri-color screen with SPL version...), then connect it to computer and finally run WM 6.1 EXE file (in case you're using Windows 7, set file compatibility mode to XP <- I'm not sure if it's necessary).
Thanks I'll get back as soon as I'm successful. Please, if you won't mind, can you please give me your chat id, so that if I have any issue, I can reach you quickly. Thanks once again. Y! [email protected].
If you'll need my help: http://www.facebook.com/Vytautas.Baciulis
Please I need someone to upload prepared files needed for Android, as I've tried preparing with aTools, following the tutorial without success.
tundelogic said:
Please I need someone to upload prepared files needed for Android, as I've tried preparing with aTools, following the tutorial without success.
Click to expand...
Click to collapse
You can get the files needed to run the android and guide at http://forum.xda-developers.com/showthread.php?t=680518