Database Develop

CM5.0.8-test3 question

Well this is a question for any of the test releases I guess... Can I perform an in place upgrade from 5.0.8-test3 (current test release) to the production release once it's out?
I just about got my FRF50 stock to the way I like it and I always dread wiping all and starting over (installing all my market apps, config home screen, wifi access points, etc). If I have to do for test3 that's ok, I really would like to avoid having to do it again once 5.0.8 comes out...
I know - I could always just wait but I keep hearing good things (+ 720p recording now) , even with the "test" release and want to check it out...
PS - Is 5.0.8-test2 based on the leaked FRF50 or is it still 2.1?

schahr01 said:
Well this is a question for any of the test releases I guess... Can I perform an in place upgrade from 5.0.8-test3 (current test release) to the production release once it's out?
Click to expand...
Click to collapse
Yes
schahr01 said:
PS - Is 5.0.8-test2 based on the leaked FRF50 or is it still 2.1?
Click to expand...
Click to collapse
Eclair 2.1

rori~ said:
Yes
Eclair 2.1
Click to expand...
Click to collapse
Thanks for the quick reply. I remember now - 2.2 was going to be represented in the CM 6.x releases - 5.x will be 2.1
I'll wait for CM 6.0

[PATCH] rmk kernel v2 for CM6

Details on my kernel were buried in the CM6 thread but I think it makes sense to have a dedicated thread:
Version 2 of my kernel build is available for CM6, which includes koush's camera fixes. I take absolutely no credit for any of the code. I'm merely building a kernel with a combination of patches which are known to work.
Details:
- Latest CM6 incredible kernel from Koush (taken from git repository)
- HTC wifi driver with wireless N enabled (this is the key difference)
- No overclock or undervolt.
- Uses Koush's (with Hydra's modifications) kernel installer scripts/tools.
Download:
http://www.fourty.net/ftp/public/android/kernel-rmk-cm6-v2.zip
<Insert usual disclaimer about not taking responsibility here>

good idea to make a thread for this, much easier to follow
updating the mash-up thread with a link...
curious though, alot of us have been getting lock up issues still related to the wifi bug i think (v2 with latest nightly)
ive had wifi off for three days now and havent had a lock up since
any ideas?

I am running this kernel with the Test 8 CM ROM. I have found that I am unable to start the WiFi Radio when attempting to use Wireless Tether. The WiFi Tether reports an issue starting the radio in its log.
I am using the newest release of WiFi tether that support AP mode, as opposed to Ad-Hoc.
Any thoughts?

Working well on the latest CM6 nightlies

rmk, you should incorporate the 2.2.1 gmail into the kernel too.

Yeah, why doesn't your kernel have gmail? You're really slacking rmk.

tats_06 said:
rmk, you should incorporate the 2.2.1 gmail into the kernel too.
Click to expand...
Click to collapse
joke?
if anything the gmail could be included in the mash up
i would personally not like to see it included with a kernel, thats ridiculous

I was just thinking out loud. No need to be rude. Have a nice day.

Still really new to this whole rooting business. Do I put this on the root of my SD, boot into recovery and flash the zip?

trombone dixie said:
Still really new to this whole rooting business. Do I put this on the root of my SD, boot into recovery and flash the zip?
Click to expand...
Click to collapse
just throw it anywhere on your sd card, then boot to recovery and choose to flash a zip from the sd card, navigate to it and then flash it (can be done from rom manager too)

Works flawlessly!
Sent from my Dinc using XDA App

each time i flash the new CM6 nightly do i have to reflash this kernel?

trombone dixie said:
each time i flash the new CM6 nightly do i have to reflash this kernel?
Click to expand...
Click to collapse
yea, because the nightly will have the standard cm kernel, not with rmk40's patch
theres also a mash up that i put together than includes this kernel as well as another small patch to mount /emmc on boot
ive been keeping up pretty good with nightly roms

invisiblek said:
theres also a mash up that i put together than includes this kernel as well as another small patch to mount /emmc on boot
ive been keeping up pretty good with nightly roms
Click to expand...
Click to collapse
which one is it?
CM6 Nightly 08102010-005435 mash-up (latest):
http://www.mediafire.com/?np50kfp38mfw62g
md5sum: 85ff8c7216fd94198950e6dc4f550f27
CM6 Nightly 08072010-004339 mash-up:
http://www.mediafire.com/?i9aykqnqx34oukd
md5sum: f0e06224355e480f4146068a6e8e47b7
CM6 Nightly 08032010-002702 mash-up:
http://www.mediafire.com/?c97mm8yf3mt58pf

trombone dixie said:
which one is it?
Click to expand...
Click to collapse
the build numbers correspond to the nightly build datestamps
the one called "latest" is gong to be the latest nightly build that ive mashed up. if there are any changes in tonights build, ill do another one

invisiblek said:
the build numbers correspond to the nightly build datestamps
the one called "latest" is gong to be the latest nightly build that ive mashed up. if there are any changes in tonights build, ill do another one
Click to expand...
Click to collapse
does the latest one have the rmk kernel in it?

trombone dixie said:
does the latest one have the rmk kernel in it?
Click to expand...
Click to collapse
they all do, thats the point of the mash up

cool beans. i was curious because i downloaded the latest one last night and my camera stopped working.

Hmmm...
Well, I flashed the updated kernal and now wifi tether won't work at all. I tried the 2.2 tether built in, it gives me an error, and I tried wireless tether, and it tells me that it failed to start the wifi interface.
Also, I'm not sure if this is just me for some reason, but whenever I use usb tether or wifi tether, my data connectivity fails after 10-15 minutes and I have to restart the phone. I'm running CM6-Test 8 and I have the latest baseband as well. Any thoughts?

Rmk or anyone, do u have link to Koush's CM6 test 8 kernel that ROM comes with? I would rather not full flash to just revert back to stock kernel ...thanks.

Any news on 2.2

Hi bought my milestone this week and wanted to know about 2.2 update wen it is coming out i checked the phone spec on gsm arena and it said upgradable to 2.2 ? Thanks

delayed again..
suppose to be early Q1 2011 now it Q1 2011.
originally it was Sep 2010.
so, root & install gingerbread from Milestone Development section.

alijs said:
delayed again..
suppose to be early Q1 2011 now it Q1 2011.
originally it was Sep 2010.
so, root & install gingerbread from Milestone Development section.
Click to expand...
Click to collapse
thats the way to go instead of waiting on motorola's lazy ass

byaco said:
thats the way to go instead of waiting on motorola's lazy ass
Click to expand...
Click to collapse
Problem is thanks to locked bootloader we still have to rely on them for a kernel
Hopefully they'll provide us with a good Froyo kernel with the official release, but we'll never get a true Gingerbread kernel

chambo622 said:
Problem is thanks to locked bootloader we still have to rely on them for a kernel
Hopefully they'll provide us with a good Froyo kernel with the official release, but we'll never get a true Gingerbread kernel
Click to expand...
Click to collapse
It doesnt matter anyways. I'm running gingerbread for several days now and it runs flawless. The speed is amazing and the improvement compared to 2.2 is noticeable. You wont be needing a 2.3 kernel. I think the milestone can stay with this. Installing an AOSP Gingerbread + some memory tweaks in open recovery juices the most from this phone. Flash works perfectly! Can it get better than this?
I believe when the minor bugs(mostly unnoticeable) in Gingerbread will be fixed everything is going to be great.
So who cares about motorola anyways?!

may someone kindly explain how is this possible to "run" gingerbread on froyo kernel (as same as it was with froyo running on eclair kernel)?
What exactly do we get by running new OS without new kernel?
What will be better if we would have gingerbread kernel for the gingebread roms?
It would be nice to know why is this, not just how it manifests.

With the froyo leak, a new kernel was released, so there are a lot of ROMs that can replicate froyo performance for real now... and please correct me if i'm wrong but gingerbread is based on the froyo kernel right? so thats why we've already got froyo as well as GB roms for milestone...

if we are lucky end of February, early March official release is to be expected

Yeah froyo will be one your er.. our phone in two weeks.
Sent from my Milestone using XDA App

carthikv12 said:
gingerbread is based on the froyo kernel right?
Click to expand...
Click to collapse
no, there is some difference in version number
btw people writing things like
"in two weeks"
"at the end of the march"
are wild guesses, right? or do you have any background info you can share with us?

MuF123 said:
no, there is some difference in version number
btw people writing things like
"in two weeks"
"at the end of the march"
are wild guesses, right? or do you have any background info you can share with us?
Click to expand...
Click to collapse
Official statements are still in the form of Q1 2011...the rest is guessing. I suggest you root your phone and learn how to flash ROMs. Froyo (2.2) is the end of the line for our phone from Mot...but the community already has 2.3 working.
Sent from my Milestone using Tapatalk

Caz666 said:
Official statements are still in the form of Q1 2011...the rest is guessing. I suggest you root your phone and learn how to flash ROMs. Froyo (2.2) is the end of the line for our phone from Mot...but the community already has 2.3 working.
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
I've already had tried almost every rom available for milestone, I just hope that the official froyo release will bring the devs some better ground to build their roms on, isn't that right? Won't be the official froyo release any better?

MuF123 said:
I've already had tried almost every rom available for milestone, I just hope that the official froyo release will bring the devs some better ground to build their roms on, isn't that right? Won't be the official froyo release any better?
Click to expand...
Click to collapse
You are probably right to a certain extent...the kernel and motor drivers are not release/final. But for all we know, the latest leak is final.
What problems remain for you?
The latest android leak has excellent battery life and performance in CM7 is through the roof...
Sent from my Milestone using Tapatalk

[ROM] P7510XWKGA Multi CSC

PDA: P7510XWKGA
Phone: P7510XWKGA
CSC: P7500OXXKG5
http://hotfile.com/dl/128934834/3b96ec3/P7...ltiCSC.rar.html
Pass: sampro.pl

Build info?

whats this? little more info would be nice. downloading now and checking it out. i'll put the info out here for people.

I can't flash this ROM - it is failed

hhhppp said:
I can't flash this ROM - it is failed
Click to expand...
Click to collapse
do you even know what it is? its from another country bro.

AM currently trying p7510dxkg4 Asian firmware release recently by samfirmware.com. Have noted faster transitions and speed improvements. Let know how's this one.

Still no more information about this ROM?

have not tried this one....but,
CSC is related to the phone/3g ROMS - so this ROM is based on a EU rom - where they have 3G, etc on their tabs.
I am not sure how it would behave on a non-3g tab (I would not try it if you are in US/other countries where you do not have the 3g on tab)
Then again KGA (could be) older than KME - if Sammy follow the alphabet, this maybe an earlier rom than what we have in US (KME) - but that still depends on the date it was released. If the release date is later than KME, then it may contain newer features - maybe not - so maybe it's older, maybe not.

Seems to be a fake or something went wrong doing the dump as there's no system.img file in the tar packages.

[ROM][STOCK]SHW-M380W Korean Tab 10.1

As I make progress towards making us an overclocked kernel I will keep m380w users informed in this thread. Wish me luck!
June 16, 2012 Had to post an updated torrent file.
May 01, 2012 New Firmware Released (NOT ICS)
Attached is a torrent file for FD19
Dec. 08, 2011 Development Halted
Here's the latest. The source code that Samsung makes available seems to have issues. I have tried and tried again to reproduce a stock kernel that will boot with the initramfs. However, the defconfig provided does not match the .config extracted from config.gz. There are some big differences between the two. The defconfig supplied with the source code defines the board as p4 yet the .config from the kernel defines it as p4wifi. So naturally I have tried both and I have tried many, many other things. All for not.
I contacted FOSS and the response was to the tune of, "We sent your message to the dev. team. If they respond, we'll respond. Until then, just wait."
With that said, I see no reason to muck about with trying to make an overclocked kernel, when there is no indication that I have valid source code.
Nov. 24, 2011
Here is a stock ROM of EK10, released 11/23/2011 for those who need or want it.
SHW-M380W.EK10.7z
Rooting directions and files I have tested and do work with this release can be found here on XDA
Nov. 26, 2011
I made some progress and have extracted the initramfs from the EK10 kernel using koush's AnyKernel. See attachments. One step closer to an overclocked kernel.
Pershoot has graciously offered his time and resources and built a recovery cwm_5.0.2.7_kor for the m380w. Which now displays correctly on this device.
He included the following notes:
UMS is not implemented (so the option will not work).
no radio/extra partitions will be available.
Click to expand...
Click to collapse

koe1974 said:
As there are only a few of us in here and nobody in Korea seems to be developing this model, I took it upon myself to retain this ROM from my most recent bout with Kies.
Here is a stock ROM of EK10, released 11/23/2011 for those who need or want it.
HOME_SHW-M380W.EK10.1207_CL583812_REV00_user_ship.tar.md5
Rooting directions and files I have tested and do work with this release can be found here on XDA
I hope to offer an overclocked kernel in the near future but we'll have to see.
Click to expand...
Click to collapse
Can you give a few more details?
Is it HoneyComb 3.2?
Is it for WiFi or 3G tablets?

BeeGee_Tokyo said:
Can you give a few more details?
Is it HoneyComb 3.2?
Is it for WiFi or 3G tablets?
Click to expand...
Click to collapse
It is Honeycomb 3.2. The shw-m380w is a wifi model.
Sent from my SHW-M380W using xda premium

One of the most noticeable difference is the integrated digital dmb tv and radio receiver and antenna. With no change in the look and dimensions. It comes wifi with or without 3g.

koe1974 said:
Nov. 26, 2011
Pershoot has graciously offered his time and resources and built recovery-cwm_5.0.2.7-sam-tab-10.1_kor_odin.tar.zip
He included the following notes:
Click to expand...
Click to collapse
refreshed:
http://droidbasement.com/db-blog/?p=2439

pershoot said:
refreshed:
http://droidbasement.com/db-blog/?p=2439
Click to expand...
Click to collapse
Excellent! Just completed a backup and all worked as expected.
Thanks
Sent from my SHW-M380W using xda premium

Thank you so much pershoot and Koe1974. Now, CWM can operate normally with my device. Actually, my device model is shw-m380s with 3g and I would like to ask you is it able to upgrade by CWM with the custom roms of P7500 (as overcome rom) and the overclock kernel?

Hi pershoot. I've just made a backup for my kor tab (model shw-m380s). Please help me to check the boot.img attached and let me know my device is able to apply your kernel or not. Thank you in advance.

Your device is not compatible with my kernel.

pershoot said:
Your device is not compatible with my kernel.
Click to expand...
Click to collapse
Thank for your reply Pershoot. Yesterday, I tried to patch your kernel and my tab couldn't boot, so I had to back to its stock kernel. I also upgraded my tab to Overcome Rom with stock kernel and it works fine exclude one issue is the brightness level couldn't adjust anymore. Because I am not good at hex and linux coding, so I appreciate if you or other developers could help me (and people own this device) to fix my stock kernel to make it is suitable with CWM roms and able to be overclocked. Thanks alot in advance.

Just to share some of my experience, I have an M380W model, I installed pershoot's CWM-based recovery, backed up everything, and installed Galaxy Task 6.2 ROM for a try (and 6.3 update). The screen keeps scrolling, but this is solved by restoring boot.img within the recovery.
I then have the same symptom as phuonglev, the screen brightness level can't be adjusted (set to medium and looks so), and I sometimes have orientation problems.
Could all this be resolved with your specific kernel koe1974 ?

I don't imagine it will. All I am planning at this point is to enable overclocking. It will essentially be a stock kernel. It sounds as if it is something in the rom causing the problem. As much as we would like to think the korean models are the same, from past experience with a galaxy s 'shw-m110s vs gt-i9000', the roms are just not interchangable. It always seems that there is 'something' that does not work as it should.
Sent from my SHW-M380W using xda premium

How is your progress Koe? I'm waiting for the good new from you.

Awesome, can't wait to see some progress.
I thought I was the only one with problems trying to use tasks rom.
Just FYI for any other M380W owners out there, you can supercharge your tab. Made a big difference for me.
*Edit
Btw Koe,
There is a small update for the M380W 10mb file from software update. After it downloads and reboots it's telling me that it failed to install. Any advice on how to get past this? (I'm rooted and supercharged).

aigoya said:
Btw Koe,
There is a small update for the M380W 10mb file from software update. After it downloads and reboots it's telling me that it failed to install. Any advice on how to get past this? (I'm rooted and supercharged).
Click to expand...
Click to collapse
If you are on EK10 then it is probably the update for Polaris Office. However, if you are not running the stock rom, your device may be reporting that is an p7500 or p7510 which I think comes with QuickOffice. So it might be confused.
Sent from my SHW-M380W using xda premium

could you upload the rom to other source please?

samoelito said:
could you upload the rom to other source please?
Click to expand...
Click to collapse
This is the best I can do ( http://www.wupload.com/file/2662167342/SHW-M380W.EK10.7z ). If you prefer bit torrent, let me know.

So, just to confirm.
If I want to root my device (I just picked it up yesterday) I need to download the
Samsung_Galaxy_Tab_10.1_root.zip file, then follow the instructions for apply the zip through recovery mode.
So what is the ek10.7z do? I understand it is a stock ROM....is it just for back up or why would it be needed? I guess I am just asking what is special about it
Then, who do you flash a ROM with this one?
I am familiar with the Korean ROMs and kernels. I have the m110s and have received so much help from Koe before Thanks for that.
I have taken over the old thread and have been trying to fill your shoes! hahhaa

[email protected] said:
So, just to confirm.
If I want to root my device (I just picked it up yesterday) I need to download the
Samsung_Galaxy_Tab_10.1_root.zip file, then follow the instructions for apply the zip through recovery mode.
So what is the ek10.7z do? I understand it is a stock ROM....is it just for back up or why would it be needed? I guess I am just asking what is special about it
Then, who do you flash a ROM with this one?
I am familiar with the Korean ROMs and kernels. I have the m110s and have received so much help from Koe before Thanks for that.
I have taken over the old thread and have been trying to fill your shoes! hahhaa
Click to expand...
Click to collapse
To root just follow the instructions and you will be fine.
ek10.7z is just the stock rom for if you choose to revert from back. currently, there doesn't seem to be much development going on for the m380w so I uploaded it for those brave enought to try roms built for other 10.1 models. I always delete tons of stock apps so it's helpful to have a stock rom to get back it i need to.

is flashing ROMS still the same?
Just using Odin and put the file into the PDA slot?