Hi guys!
Last night I installed version froyo I897CJI6 all well but ...
Once I got regular menu which had few programs with the name AT & T,
What was somewhat slower than the previous version (Original).
When I entered the settings to see if there is something new and pressed the touch button with the arrow back and instead of carrying just before Settings
It showed the main screen and it did this every time.
The middle button is not functional at all (home button).
With so many problems I decided to go back to my old version which worked flawlessly.
And here comes the big problem. When you open the phone and connect the USB cable, the phone turns off and the screen goes black (it's like a shutdown)
but when I take out the cable phone opens again from scratch with no Samsung boot screen, but AT & T Phone World.
Obviously I tried to go into recovery and download mode with combinations vol UP DOWN HOME BUTTON POWER BUTTON but nothing.
And worst of all is that when I try to charge it, the charger does exactly the same thing.
I got galaxy s i9000.
Thank you for your time
first sorry for my inglish i'm french !
ok the solution for me (because i did the same thing) was this post:
Release: 3-button combo fix for any firmware version i'm new user i can't post outside link in my message search this post !
You phone is dead you need Jtag to repair
sorry man . Go for the riff box
celtichazard said:
You phone is dead you need Jtag to repair
sorry man . Go for the riff box
Click to expand...
Click to collapse
if he had little time like 2-3 secondes in usb debugg i could repaired whith the new method and new fix of Richthofen !
@gianni, yohann is right!
I had the same problem and today I managed to solve it (had to buy a separate battery charger though).
You can still enter in the download mode by entering the "adb reboot download" command *just after* you plug in the usb cable in the phone. You have to do it before it turns itself off ( you have 1-2 seconds before).
This is how I did it:
-had to charge the battery externally because usb didn't work
-with full battery turned the phone on and let it boot completely
-on pc, prepare the command prompt with the "adb ..." command
-connected usb to phone
-just after first windows "usb peripheral connection" sound executed the "adb .." command
-phone enters download mode and you can flash again
Good luck!
I did the same thing, flashed the Clarity FW into my GT-I9000, no home button so can't instruct download mode, cant find an app that will install the correct rom from the phone that doesnt require rooting (can't root it obviously), cant connect USB yes it will connect for a second but no where near enough time to register and be contactable by one click root or download adb command etc
I'm hoping something happens soon or im throwing the thing in the sea. Also the at and t firmware, bad bad baseband, loads of loud squealy static unable to hear callers.
Please help me, I just had a baby and I can not afford to be stuck on a 2 yr contract with no phone!
hey giannis,
I got this reply from a post i put somewhere else, wont work for me as I dont have SU, but yousaid you went back to your old rom so you must have:.
i haven't tried it but it should work:
install a terminal like connectbot and then type
su
reboot download
Your waiting your time finding a solution you need a jtag repair buy a riff box or send your phone to other member allready achievement the repair richthofen
Im waiting for my phone return from autralia from benjamin dobell he try to repair but no luck he try with other method not jtag
if theres anyone with a riff box in Sydney I would give thetm 100 bucks to unbrick my phone tonight or tomorrow morning!
Does anyone know anyone who does Jtag repair in melbourne??? anywhereeee,i need to get my phone fixed :-(((
Does anyone know anywhere in Melbourne that does JTAG repair?
Related
hi friends
i have just bought T-mobile MDAIII ( also knows as 2 XDA2s/imate PDA2K)
AND I WAS UPGRADING MY ROM AND BY MISTEK WHILE UPGREADING IT GOT DISCONNECTED FROM USB
AND NOW ITS NOT WORKING AT ALL
WHEN ITS CONNECTED TO USB THE SCREEN SHOWS
USB V2.05
AND WHILE ITS OUT OF USB ITS SHOWS
SERIAL V2.05
THE PHONE IS NOT GETTING ON NOR ITS SHOWING SOMEHTINGS ELS THAN THIS
I TRIED TO RESET ALSO BUT ITS NOT GETTING RESET TOO
I AM NEW USER FOR PAD PHONES
CAN ANYONE HELP ME TO SWITCH ON MY PHONE TO ITS ORIGINAL VERSION
THANKX
Calm.. breath deeply, and chant the following!!
Start the setup again!
Thats all you need to do!
It is stuck in Bootloader mode.. a hard reset (press the power button & press the reset switch at the same time!) will help, HOWEVER.. you really should just start the update procedure again!
Worse case senario.. Press the power, record and reset button all together. That will put the device into a "clean" bootloader mode.. You can then update!
Hey Juggles, I've a brief question on the bootloader...I take it that it's in a separate memory area from the actual CE ROM? Just trying to wrap my head around how it works. The common "Radio: NONE" problem is apparently caused by the bootloader going to quickly, not allowing the radio to init before it queries it. If we understood where the code was, it might be patchable to add a short delay here. Mind you, patching the bootloader....dangerous! Is there a recovery proceedure for when it's goosed? Something like a serial jtag or i2c link for flashing?
no probs ppl
its got cure
thankx to this awesome website
i found the solustion
thnakx
adminyou can close this thread
thnaking you
Hi all.
I've got a malfunctioning diamond, the data usb connectors must have been disconnected from the phone.
I want to send it in for repair, but i have a bepe rom on it, i am afraid my service provider wont repair it because of the voided warranty by flashing a non-stock rom on my device.
Is there anyway i can transfer the stockrom (yes i have it) to my device, and flash it from there? I can charge my device.
If not, is it possible to overclock the cpu so the device will be destroyed or something in that direction?
-Heien.
Well, you could try to find the problem yourself by using the service manual in the wiki. Or...I can think of many ways you could "destroy" the phone.
please give me inspiration ?
Recently I saw an option "microwave" which should be awesome good for bricking
Riel said:
Recently I saw an option "microwave" which should be awesome good for bricking
Click to expand...
Click to collapse
<3 best post here
Riel said:
Recently I saw an option "microwave" which should be awesome good for bricking
Click to expand...
Click to collapse
Microwaves leave serious burn marks on the PCB's absolutely not recommended, any technician will recognize the obvious tamper.
There are several ways to brick a device, but these kind of practices are not condoned here, so this info will not be made public!
(Don't even try to PM me about it, I will ignore all PM's regarding this question, no exceptions!)
@heien
A lose usb connector can sometimes easily be fixed by using an SMD rework station (if the PCB traces are undamaged.
If the traces are damaged, you'll be in need of a new main board.
The biggest job on the diamond is to disassemble it, it takes up a lot of time.
But the repair itself would be fairly simple.
Don't even try it with a soldering Iron (ext-usb leads have a small footprint), you should use an SMD/SMT hot air rework station, or better ask a mate who has the experience and access to equipment for these kind of repairs.
Best of luck,
EqX
if u are taking it for a hardware malfunction why be worried about what ROM do you have?
do u think they'll (technicians) check the ROM version you have? why bother? they'll dismantle it and repair/change the mother board. maybe you'll got a diamond with a new motherboard and a new-stock ROM.
@ eqx
Thank you for the very kind, but nerdy suggestion I'm afraid my ten thumbs would kill the phone permanently.
@Kukuriku
is this something you have experienced, or ? but i get your point, maybe i should just turn it in tomorrow..
Are you sure the problem is hardware related?
I have pretty much the same problem as you. My diamond can charge through the usb port but cannot be detected by any PC (I tried several PCs). I also use bepe rom (9.7).
jeanunit72 said:
Are you sure the problem is hardware related?
I have pretty much the same problem as you. My diamond can charge through the usb port but cannot be detected by any PC (I tried several PCs). I also use bepe rom (9.7).
Click to expand...
Click to collapse
even when it is in bootloader mode the phone cannot be detected by the pc?
karim099 said:
even when it is in bootloader mode the phone cannot be detected by the pc?
Click to expand...
Click to collapse
No. I have tried entering bootloader mode via bluetooth or with SSPL-Manual.exe but it’s still not detected.
The PC sometimes shows the "new peripheral detected" icon in the taskbar, but it disappears after a few seconds. The phone also shows me the menu (asking me to choose between activesync , storage disk and internet sharing).
PS: I have tried soft and hard resets
jeanunit72 said:
No. I have tried entering bootloader mode via bluetooth or with SSPL-Manual.exe but it’s still not detected.
The PC sometimes shows the "new peripheral detected" icon in the taskbar, but it disappears after a few seconds. The phone also shows me the menu (asking me to choose between activesync , storage disk and internet sharing).
Click to expand...
Click to collapse
bootloader via bluetooth? i mean the Tri color boot screen.
while the phone is off, press volume down and power it on.
then connect pc via usb. "usb should appear on screen"
try flashing other that bepe's rom. it might be a software issue.
karim099 said:
bootloader via bluetooth? i mean the Tri color boot screen.
while the phone is off, press volume down and power it on.
then connect pc via usb. "usb should appear on screen"
try flashing other that bepe's rom. it might be a software issue.
Click to expand...
Click to collapse
Thanks, but so far I haven't managed to get it to display "USB".
Either it shows "serial" or it shows nothing
basically my usb port is f***ed...
I'm stuck with a 1 month old phone that I can't flash or send back to orange for repair/exchange
+ I can only transfer files on it by bluetooth!
No Boot loader
Not charging
No lights
Nothing by pressing vol down and power buttons
Nothing by pressing both vol buttons and reset button
Turned off for hours without battery and pressed power button for long time to drain the battery and turned back on.
Nothing works any more ideas.
But when I connect it to my laptop it does make a notification sound that a new device is connected and is called the qualcomm cdma technologies msm.
If I have bricked it and no solutions and I have warranty should I call HTC or my insurance company?
See..
http://forum.xda-developers.com/showthread.php?p=7444943#post7444943
OK,try this! Remove the Battery-Cover. Look at the Space between the Battery and the Phones Frame on the lower side,on the right of our SIMcard. If you can see two small Pins,remove the battery, and reinsert it carefuly,so that the two Pins are touching the contacts on the Battery...
what happened?
flashing fail? any details please.
DN41
When experiencing any kind of problems its always usefull to post what you was doing before the problem occured. With no other information, there is no way to do any kind of propper trouble shooting.
Its like droping your car at a garage, say it has problems and walk away. Was it that you ran out of gas, did you battery failed or the engine, is it only a lightbulb that doesnt work. A car mechanic wont be able to help you with the car problem cuz he dont know what kind of problem you were experiencing
Try to recharge your phone by default loader (not by pc-USB) for a few hours and try to boot again. Or try entering boot loader while pressing volume down and power on after a few hours of loading.
I agree.
The issue has been posted like a telegram being sent to a grandchild for her nanny's funeral...!!
No one will probe you for your issues. You need to provide as many details as to how you r***ed your HD2..!!
Hi
i have pretty much the same problem. I got this phone on ebay because someone tried to put another rom on it and failed due to an power failure (thunderstorm).
When i connect the phone to the computer via USB, it recognizes a Qualcomm CDMA MSM Driver but cannot install it.
About the phone:
No lights, no bootloader, nothing. It becomes warm while charging so i assume the hardware is not faulty. I guess the bootloader is broken.
Do you have any idea how to save this phone?
i had once a similar issue...
i flashed and failed (not really, cause it works again )..
everything was the same only that i could get access to bootloader (and so my leo booted up).
but when it was powered off and i connected it to my pc, it also recognized a qualcomm device...
badly, that doesnt help you...
i have no plan how to get this work again...if the phone doesnt turn on...
maybe its time for a prayer.
DN41
I just found this thread, and hoping someone has come up with an answer, though I havn't actually searched the threads yet as i just got the phone today, cause someone bricked it trying to unlock it (I assume because his only clue was I might need to flash a different rom). But its the same symptoms, no lights, dosn't show charging, attempts to install a qualcomm CDMA MSM driver when connected to windows pc.
Is there a solution?
Thank you in advance for your replys.
DemonLoader said:
I just found this thread, and hoping someone has come up with an answer, though I havn't actually searched the threads yet as i just got the phone today, cause someone bricked it trying to unlock it (I assume because his only clue was I might need to flash a different rom). But its the same symptoms, no lights, dosn't show charging, attempts to install a qualcomm CDMA MSM driver when connected to windows pc.
Is there a solution?
Thank you in advance for your replys.
Click to expand...
Click to collapse
Nope. You're screwed.
Hi, my celphone is going crazy!
When it's off, and i press the power button to turn he on, appears in the screen the screen that appears when you plug on wall charger, (just like the attached one), and it doesn't turn on, the only way to turn it on is putting the battery while connect the charger and make the three button combo, enter in recovey mode, and then select "reboot system now"!
So, i've gone to a repair store, and them told me that my boot sector is damaged, becouse the excessive flash's, and need to be restored using one "box".
I've returned to two different stock roms, but didn't worked.
What could i do?
Thanks!
P.S.: last week i've had to fix my power button, that was not working.
Hello, I am no expert, but i think what the repair store meant is that you need a JTAG repair with a riff box. What this means is that you need to find someone who owns a riff box and has had a lot of practice with JTAG to solder a cable to your phone's motherboard and replace the boot image. This is a very difficult procedure, the only people I KNOW that can fix this for you would be the guys at this site
http://mobiletechvideos.mybigcommerce.com/
I believe they'll do it for around 80 US dollars, give them a try. Good luck pal!
One other option, depending on your soldering skills (or whoever you take the phone to) would be to try applying AdamOutler's Unbrickable Mod. That would let you flash over pretty much anything that could be causing your phone to hang.
That is a problem, i have no soldering skils, and hava no trust one to do it for me...
I'll try some .jar heindals, today....
Other problem is the distance, i live im brazil, to send my phone to mobiletechvideos guys i'll need to wait a very long time to get it back!
Thanks!
Problem Solved!
Hey Guys problem solved!
I've applyed two different heindal packages one was SamsungCaptivate-SGHi897-UCKB2-Rooted-One-Click form AdamOtler i think, and the other was i897-Speedmod-K13E-GBbootloaders-One-Click, them i've flashed again the CM9 ics!
Thanks for the help!
Hello forum! I own a smartphone S3 mini model GT-i8190n with rom stock, root, recovery cwm and usb debugging disabled (I think).
Because of a problem with the battery I was restarting myself very often during the boot and I was forced to keep it constantly on charge ...
The other day ago to reboot but does not start and does not turn on any more, not making time to receive the new battery.
So far I tried to turn it on in all ways, including recovery and download mode, but nothing. Connecting it to the PC via USB I get a new device called U8500 USB ROM, but it connects and disconnects indefinitely and fails to install the drivers.
Could I try some solutions in this way?
I've heard of Jtag to unlock the phone and a particular image debrick.img, but I would absolutely not format anything, nor lose any data, just reactivate the bootloader.
Can I have some information on this method (steps to perform, necessary material, etc.) and if I format the phone? Is any of you able to perform this procedure by the right means?
I apologize if I have violated any rule of the regulation, in which case I will reserve the right to modify the post.
Please help me to solve ... for me it is very important!
Thanks to all those who will respond !!
The battery is dead. Replace it and see what will happen.
Orionbell37 said:
The battery is dead. Replace it and see what will happen.
Click to expand...
Click to collapse
I hope so, but the symptoms it presents (both during the charge, which does not happen, that connecting it to the PC), do not think anything good ...
Now replace the battery, but does not want to wake up. Please help me to solve the problem with other solutions. I do not want to throw the phone.:crying::crying:
david6893 said:
Now replace the battery, but does not want to wake up. Please help me to solve the problem with other solutions. I do not want to throw the phone.:crying::crying:
Click to expand...
Click to collapse
Does the Led on the screen turn on if you connected your phone to Usb-charger?
If not, there could be a problem with mainboard or LCD.
If yes, could be a problem with LCD.
It is not conducive for a long lifetime to use the device often during the charching.
klaus-hamburg said:
Does the Led on the screen turn on if you connected your phone to Usb-charger?
If not, there could be a problem with mainboard or LCD.
If yes, could be a problem with LCD.
It is not conducive for a long lifetime to use the device often during the charching.
Click to expand...
Click to collapse
This smartphone has not any status LEDs.
Now if it is charging does not give any sign of life.
So I assume it is "dead" and the only way to try to resurrect it is through jtag. Correct? Someone who can recommend me something in this way?
"So far I tried to turn it on in all ways, including recovery and download mode, but nothing. Connecting it to the PC via USB I get a new device called U8500 USB ROM, but it connects and disconnects indefinitely and fails to install the drivers."
Are you sure that the Usb-port works?
Did you try a full charged battery?