Related
Hello,
I have been keeping up on these forums for awhile now and have learned it should be hard to brick the Captivate, well that's what i fear may have happened.
I hope you guys have ideas on how i can fix this, What happened is.
I followed the info from this tread here, http://forum.xda-developers.com/showthread.php?t=734871
I was flashing the I9000 rom to my Captivate, i have done a few roms before with out problems.
This time i flashed the rom from the US section and flowed the instructions on the I9000 rom and Odin3 did a reset to reboot the phone and that's the last time i seen anything on the screen.
So i thought it would be best to let it keep going and didn't touch anything, then Odin3 gave me the Green light and said passed but the screen was still black.
So i unhooked Odin3 and pulled the battery thinking maybe i just needed to reboot it, but nothing came back.
I have tried to put it back into download mode but have not been able to, its acting kind of like its not turning on now.
I have tried holding down volume up and down and inserting the usb cable after i put the battery back in but that does not work any more.
I have read that the volume buttons on the I9000 roms are backwards so i thought maybe that might be the problem but am out of ideas.
I hope you guys have some ideas, ill own any one a beer for help on this.
SpinDry2010 said:
I have been keeping up on these forums for awhile now
Click to expand...
Click to collapse
Not long enough to know this belongs in Q&A, apparently.
Yea sorry about that i was reading in that section didn't notice until after i posted.
So is it possible that the bootloader got jacked since i see nothing on the screen?
I have to question why you used a thread that was posted in July...
If you can't get into Download mode using any of the button combos, you'll need to make a Jig.
If that doesn't work, you're **** out of luck.
Jig? 10 char
Well the date of the thread does not seem to matter, but a Jig would only seem to work if i had a boot screen and just had flashed a crippled loader.
But looking into this further i found that the fing bootloader was packaged into the I9000 rom, now since that seems to be what i flashed i can see why that killed it.
I wish i would have known this before hand but i guess lesson learned unless some one thinks that should not matter.
I will have to send it back but i should be ok on that with ATT, but i will stay away from letting the Slb.bin stay in the flash next time.
Hey everyone, First time poster here and it seems my captivate is bricked. I'm fairly new to android but I caught on with ROM/kernel/etc.. flashing and all seemed to be going well. I saw the new 3.5 update for precision and wanted to update from 3.0. I did my usual thing and restored to stock with ODIN instead of flashing over. Rooted all over again, downloaded ROM manager and flashed clockwork recovery. I selected the ROM when I was in CWrecovery and rebooted.. but for some reason the phone never gets past the boot screen. The ATT logo shows up, then the suckerpunch logo (as suckerpunch is included in the precision ROM) and then the precision logo.. but it just keeps starting over from there. I thought I did a clean flash but something went wrong obviously.
Ive tried the three button combo and anything that has been stated before on here about the three button combo timing and whatever. So it seems that I cant get in recovery or download by using the traditional methods.
I'm guessing my phone is soft-bricked, which should be relatively easy to fix, but I can't get into any mode at all. Ive seen plenty of threads with people having boot loop issues but they seem to have been solved my some combination of buttons used or the ODIN usb download mode technique. Ive seen mention of using adb commands to get into download mode, but I think I have to have usb debugging enabled which I can't enable, clearly.
Any help would be appreciated, especially since in the meantime I'll have to use my old 903sh.
CCDillon said:
Hey everyone, First time poster here and it seems my captivate is bricked. I'm fairly new to android but I caught on with ROM/kernel/etc.. flashing and all seemed to be going well. I saw the new 3.5 update for precision and wanted to update from 3.0. I did my usual thing and restored to stock with ODIN instead of flashing over. Rooted all over again, downloaded ROM manager and flashed clockwork recovery. I selected the ROM when I was in CWrecovery and rebooted.. but for some reason the phone never gets past the boot screen. The ATT logo shows up, then the suckerpunch logo (as suckerpunch is included in the precision ROM) and then the precision logo.. but it just keeps starting over from there. I thought I did a clean flash but something went wrong obviously.
Ive tried the three button combo and anything that has been stated before on here about the three button combo timing and whatever. So it seems that I cant get in recovery or download by using the traditional methods.
I'm guessing my phone is soft-bricked, which should be relatively easy to fix, but I can't get into any mode at all. Ive seen plenty of threads with people having boot loop issues but they seem to have been solved my some combination of buttons used or the ODIN usb download mode technique. Ive seen mention of using adb commands to get into download mode, but I think I have to have usb debugging enabled which I can't enable, clearly.
Any help would be appreciated, especially since in the meantime I'll have to use my old 903sh.
Click to expand...
Click to collapse
Can you describe exactly which three button methods have you performed? The one that always seems to work to get to download mode is hold both volume up and down and plug in USB cable to the computer and you should be able to get into download mode (of course after taking out the battery, shutting off your phone first). You should have ODIN open before this, then after that just press start on ODIN.
I believe people with captivates who have problems with 3 button combos have batch 1008. Please tell if you can't use the method above then we can check your batch.
koreancanuck said:
Can you describe exactly which three button methods have you performed? The one that always seems to work to get to download mode is hold both volume up and down and plug in USB cable to the computer and you should be able to get into download mode (of course after taking out the battery, shutting off your phone first). You should have ODIN open before this, then after that just press start on ODIN.
I believe people with captivates who have problems with 3 button combos have batch 1008. Please tell if you can't use the method above then we can check your batch.
Click to expand...
Click to collapse
I appreciate the fast response.
Ive tried the above method and it didn't work. Ive also tried plenty of others like holding the power button with the two volume buttons (to try recovery) Ive also held the buttons down for certain amounts of time to see if my timing is just off, and pretty much a few other generic three button combos that are performed when this sort of thing happens. Instead of getting into download mode, it of course just shows the battery charging.
If the phone is plugged in while it is doing its rebooting cycle then ODIN actually detects it, but I still wouldn't be able to do anything I'm sure.
Ive read through many posts about this but I just cant find anything to work at all, maybe buying a jig would be the final solution. :/
EDIT: If it helps, before flashing my captivate for the very first time a month back, i was told to check to see if I could enter into download mode and recovery safely, which I could and this was on stock rom. Ive been able to get into download/recovery with other ROMs as well, idk what's up now though
CCDillon said:
I appreciate the fast response.
Ive tried the above method and it didn't work. Ive also tried plenty of others like holding the power button with the two volume buttons (to try recovery) Ive also held the buttons down for certain amounts of time to see if my timing is just off, and pretty much a few other generic three button combos that are performed when this sort of thing happens. Instead of getting into download mode, it of course just shows the battery charging.
If the phone is plugged in while it is doing its rebooting cycle then ODIN actually detects it, but I still wouldn't be able to do anything I'm sure.
Ive read through many posts about this but I just cant find anything to work at all, maybe buying a jig would be the final solution. :/
EDIT: If it helps, before flashing my captivate for the very first time a month back, i was told to check to see if I could enter into download mode and recovery safely, which I could and this was on stock rom. Ive been able to get into download/recovery with other ROMs as well, idk what's up now though
Click to expand...
Click to collapse
If you could get into download before, I don't know why you wouldn't be able to do it now. The fact that you can see the battery charging icon indicates that you should easily be able to get into download mode. Can you double check your methods and if neither work, you could always go for JIG.
you may need to buy this to get into download mode:
http://cgi.ebay.com/ws/eBayISAPI.dl...69977&ssPageName=STRK:MESELX:IT#ht_623wt_1139
just to clearify and add one more thing to try...
you are experiencing a boot-loop not brick..
ive heard of boot loop problems sometimes getting into download mode by:
remove battery
plug in usb
hold volume buttons
put in battery
(slight change on usual method)
EDIT: you may also want to try the AIO captivate toolbox in the Dev section, it can try to put your phone into download mode
I had this happen before. I did what Tresselo said and it worked.
Sent from my SAMSUNG-SGH-I897 using XDA App
plug in your usb cable. let the phone reboot and see if the comp recognizes the phone at any point during your boot loop. if it does - your in luck, sort of... I had this problem as well with the same ROM. idk if its the ROM or just me screwing up (probably me screwing up) anyhow, type this command into a command prompt (must have the android sdk and adb installed) get into the tools folder where ever that may be at for me its C:\android\tools
from this dir type this: adb reboot download - do this as soon as the comp recognizes your phone - should work.... IF the comp is seeing the phone. If its not you WILL need a JIG which can be made fairly easy.
Try adb if you haven't already. Instructions are in the stickies in the Dev section.
Sent from my Captivate using XDA App
Thanks for all the replies guys, got a good community here. Sadly no suggestions have worked at all.
jgc121 said:
plug in your usb cable. let the phone reboot and see if the comp recognizes the phone at any point during your boot loop. if it does - your in luck, sort of... I had this problem as well with the same ROM. idk if its the ROM or just me screwing up (probably me screwing up) anyhow, type this command into a command prompt (must have the android sdk and adb installed) get into the tools folder where ever that may be at for me its C:\android\tools
from this dir type this: adb reboot download - do this as soon as the comp recognizes your phone - should work.... IF the comp is seeing the phone. If its not you WILL need a JIG which can be made fairly easy.
Click to expand...
Click to collapse
I downloaded the android SDK and installed all the necessary components, as soon as I hit the right directory (for me C:\Program Files\Android\android-sdk-windows\platform-tools>adb reboot download) and I get "error: device not found". So adb seems to be running right and I may just have to get my timing right, but as of trying a good ten times I'm not having any luck.
When booting up my cap while plugged into the computer, the noise that signals a usb connection sounds and when going into device manager and looking at usb connections, its says samsung android device. Seems like I could get into download, but I guess I'll just keep trying to time it exactly right even though Ive hit the command near the connection noise every time.
I'm not losing hope, but I went ahead and ordered the jig off of ebay that mengbo posted, I'm really hoping that the jig could solve my problem for good. From your perspective guys, would the jig DEFINITELY work? Or is it just a kinda one shot, hope for the best thing?
The JIG is a pretty sure thing seeing as how you are just in a boot loop.
CCDillon, Im in the same boat as you. Same thing happened to me. I have tried a jig and it did not work for me. Hopefully it works for you. I have tried ADB also and it could not find the device. I really hope there is something out there that can help us.
aw man, that's not good at all.. hope you can find a way. Did you make a jig and were you using the same ROM?
Hopefully its just mine and the jig works for you. I didnt mean to scare you. I made a jig at first, and it kept booting the phone. Thought I didnt make it correctly so I got one off of ebay, thinking it had to work. That one did the same thing. Thought maybe it was a faulty jig and the guy I got it from ('mengbo' on this forum) sent me another one to see if that was it. The new jig he sent (that worked on his phone) did the same thing. So, something else is going on.
I was going from Phoenix 4.5 to Supernova ROM and it gave me the same error you got. Now it Boots the ATT screen then loops the Phoenix ROM logo over and over. 1 vibrate followed by 2 more
I'm hoping the JIG works for mine, otherwise I'm not sure what to do. I admit it does scare me a bit to see that you've tried all these different things with no result. I was scanning the precision thread and it seems one of the avid users/posters got caught in a boot loop and it looks like they have gotten out of it, I sent a PM so maybe I can see what that user did, though part of me is thinking that the three button method worked for him but for some reason not for me. This is very frustrating and I'll keep an update on everything, the JIG should be here in about 3 days or so.
Also, you think it may have something to do with how many times our phones have been flashed? Ive looked up to see if flashing is bad for the phones "health" but it seems flashing won't really hurt anything, nor have I really flashed too much. Btw, my phone acts the same you described as well, with the random vibrating and everything.
My mind just seems to be jumping to any random possibility, it just sucks not having a working phone.
Hope SOMETHING works for you
Seriously - you guys are all worked up over a boot loop. the JIG will put you into dl mode just fine... only time it has high chance of NOT working is if you only see black screen - no power up at all.... you can make a JIG by getting 3 - 100k ohm resistors and a 1k ohm resistor from radio shack for about $1.25... its simple.
I removed my 3 button combo accidentally by flashing att 1 click, theres an att 1 click with 3 button fix, flash that when you can get into download mode.
If you can connect with adb use it to go to download, if not, you need a jig... it works, I have been down your path!
jgc121 said:
Seriously - you guys are all worked up over a boot loop. the JIG will put you into dl mode just fine... only time it has high chance of NOT working is if you only see black screen - no power up at all.... you can make a JIG by getting 3 - 100k ohm resistors and a 1k ohm resistor from radio shack for about $1.25... its simple.
Click to expand...
Click to collapse
+1. Learn how to make the JIG you need HERE...
Or buy one from me HERE... < Shameless plug.
I was in the same situation as you guys after i had a bad flash and the loop on the bootanimation. I bought a jig online and it worked. The trick is to take out your microsd, and simcard and leave out the battery for 15 seconds. Then put back ONLY the battery in, and plug in the jig. It should turn back on and be put into download mode then flash with one click odin.
odin one click WITH 3 button fix....... saftey first.
So a few days back i flashed the serendipity VII rom on to my previouly 2.2 Cappy, and it worked like a charm... a day later i was experimenting with a few ROMS all 2.3, and they worked, and to my luck I flashed a 2.2 ROM (Cognition 4) (by mistake i might add) and there it was a complete black screen brick!
since then Iv tried various methods to bring it back to life, the 3button thing, the taking the battery out holding down the 3 buttons connecting the usb and putting the battery back in, then releasing power only... Iv tried to even get it JTAGed, which was a disaster since the JTAG guy tried and cudnt get the thing to show connectivity... ANY HELP??
I fail to accept that this is the end... Please HELPP!!!!!
just keep trying to get into dl mode by using other usb ports, a jig, holding buttons while battery removed and install battery then plug in phone, happened to me plenty of times but was persistant that it finally got into dl mode.
Try making a jig and putting phone in download mode then flash stock through odin -- do a search for jig in the captivate forums. It saved me many times. You can even make one for about $1.
If you had gingerbread then you may need to use the i9000 version of entering download mode. The key combination is different. Search around on the forum as plenty have already mentioned what it is. I just don't remember off the top of my head.
if it will not power on at all....it doesnt look good.
try holding volume down and power...see if that brings up download mode. a jig is only $8 shipped to your home and will work.
i had a similar scenario and a jig brought my cappy back to life!! ive had the same phone since september, the jig has saved me from at least 8 new phones
I have seen a black screen for download mode. The only way I knew I was in download was when I saw the yellow band appear in Odin. Open Odin, and try different button combinations that will get you into download mode until you see Odin recognize your phone.
I'm sure you've tried, but these are 2 other key combos. I've had that happen to me in the past and it can be frustrating.
1. volume up + volume down
2. volume down + power
3. volume down + home (softkey) then power (this is the one that worked for me)
4. volume down + menu (softkey) then power
Hope everything works out for you. If all else fails, I'm sure a jig will work.
I learned this in the days of old, when we were flashing the baked Froyo's. Don't know if it applies or if you've tried it already, but what used to work for me was:
Open Odin
Pull the battery out, put it back in...don't turn it on.
Hold the volume down button
Plug in the usb
At no point in the process should you ever touch the power button. For your Odin version, I'd recommend using the Stock Odin, get factory and then try flashing your custom Rom again.
(Edit: I say volume down because that's the current button to enter download mode with Gingerbread. It used to be Volume Up and Down at the same time.)
ok first this does not belong in the dev section! belongs in Q&A so thing will get closed pretty soon. also other than a correct jtag u cant recover with jig, button combo or voodoo magic. u just mixed a i9000 GB bootloader along with a captivate froyo secondary boot which the Cog4 ROM has. use search and i think you can find someone who offers a jtag service
Well, I've seen a few mention it, but I think your going to need to make or puchase a jig. Hit radioshack and get 3 100kohm resistors, about $1. The directions are all over the forums here. I'd be willing to bet that will fix you up.
Also, once in a while it may still be alive even though the screen is black. Like someone else said, go ahead and start Odin, then plug your phone into USB. See if there is any response from Odin. It's worth a shot.
Either way, it's good to have a Jig handy.
claim warranty.
Odin 1 click to stock then start from scratch!
EsotericSYN said:
Odin 1 click to stock then start from scratch!
Click to expand...
Click to collapse
you need dl mode to do that, he's not even getting power up. go to att store and say it wont turn on today gimme replacement.
How did someone with just 2 posts make a thread in here? I thought you had to have 10+ posts just to post in a thread.
just contact samsung the captivate should be in warraty untill oct2011.. i also bricked my phone while on serendipity VII see Q&A Soft brick or hard Brick.i had my phone stuck on the battery charge screen. was not able to get to download mode or recovery and my battery wouldnt charge . so i called samsung just gave them my imei number and they said it was under warranty until oct 2011. i did not tell them i bricked it while flashing roms. i just told them my phone wont charge or turn on. i sent my phone to the samsung repair center in dallas tx. my phone was fix at no charge even though i had it rooted and running a custom rom. samsung just fixed my looping battery screen and put there stock froyo erasing all my apps and data.it took about 2 weeks to get all this done. got my phone back this monday and everything is working great....
so just contact samsung and say the phone wont turn on dont say you rooted it or flashed a room. samsung wont check to see if its rooted all they care about is that you didnt drop the phone or something like that.
cremefraiche said:
ok first this does not belong in the dev section! Belongs in q&a so thing will get closed pretty soon. Also other than a correct jtag u cant recover with jig, button combo or voodoo magic. U just mixed a i9000 gb bootloader along with a captivate froyo secondary boot which the cog4 rom has. Use search and i think you can find someone who offers a jtag service
Click to expand...
Click to collapse
listen to this man
Same exact thing happened to me on my last phone. Your phone is dead, dead, dead. Hard bricked. Nothing will bring it back. Take it to an AT&T store and tell them you were upgrading to 2.2 and the screen went black and now it wont come back on.
There is no jig or JTAG that will fix it, trust me, I tried
timbrendelaz said:
Same exact thing happened to me on my last phone. Your phone is dead, dead, dead. Hard bricked. Nothing will bring it back. Take it to an AT&T store and tell them you were upgrading to 2.2 and the screen went black and now it wont come back on.
There is no jig or JTAG that will fix it, trust me, I tried
Click to expand...
Click to collapse
at&t might help, but you have to hassle alot.Just contact samsung they will help for sure.i just sent them my bricked phone and they fixed it in two weeks at no charge. samsung will do it for free, im living prof.
I dont really buy into the fact that its dead, no way... its just that the revisions on the boot.bin and sbl.bin are different... shouldn't JTAG work? and cant claim warranty cuz im not in the US!!! there must be a way people.... im faar too poor to just give up without a fight!!!
I just flashed Cognition 4.4.9 and now I am stuck on the Cognition boot screen. I am unable to get into either recovery or download mode.
SuperOneClick still roots/unroots the phone, but Odin won't do anything (obviously without download mode)
Any ideas?
In regards to your topic title:
The best way to 'suck' on the Captivate is by literally inserting it into your mouth for 1-3 seconds but make sure you hold the volume up and power button while doing it that way you can get into download mode.
First off there is a Cognition Q&A stickied you shouldent have open a thread for this. Take out your battery take out your sim and SD plug your phone in to your computer, press Vol +- and insert battery. If that doesn't get you in to download mode then get yourself a Jig
prbassplayer said:
First off there is a Cognition Q&A stickied you shouldent have open a thread for this. Take out your battery take out your sim and SD plug your phone in to your computer, press Vol +- and insert battery. If that doesn't get you in to download mode then get yourself a Jig
Click to expand...
Click to collapse
I realize there is a Q&A form which I did read though. However as I am sure you are aware before you jerk out on people that there are often numerous ways people have fixed their phones. I was hoping to find one of those said ways. I apologize that I offended you.
lonhanson said:
I realize there is a Q&A form which I did read though. However as I am sure you are aware before you jerk out on people that there are often numerous ways people have fixed their phones. I was hoping to find one of those said ways. I apologize that I offended you.
Click to expand...
Click to collapse
I was pointing out is you should have ask there. You could have also read through the countless brick threads on this section. Mind you I did give you a method to get in to download mode. I did not jerk a anything, i tried to help.
xThe Enforcer said:
In regards to your topic title:
The best way to 'suck' on the Captivate is by literally inserting it into your mouth for 1-3 seconds but make sure you hold the volume up and power button while doing it that way you can get into download mode.
Click to expand...
Click to collapse
^---- Can I get my 3 seconds of life back from reading this waist of a post?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Please use the Q&A threads that are stickied already.
Thread closed
I've got an 896 Rogers Captivate that has been draining my sanity for hours now.
I managed to get it to download mode exactly ONCE out of ... literally eight hours of hold buttons, remove battery, replace battery, hold buttons, remove battery, etc etc.
I reached download mode by using the three button technique Volume Up + Volume Down + Power.
Once there I idiotically said "I can get here again.." and removed the battery.
I got this phone from a family member and managed to get it to download mode, but every other time I hold buttons (any buttons) it does exactly this:
If plugged into the computer it shows the loading daisy (which doesn't animate). I can hold any combination of the volume buttons and power button and it will flash black and return to the daisy.
If not plugged in, it shows the model number and 'Samsung'. Behavior is the same. Holding volume up, or down and the power button will flash black after eight seconds and then show the model and 'Samsung'.
I haven't tried Odin (although I've downloaded it and a rom thusly), a Jig, or any of the other brute force approaches to reaching download mode simply because I know that if I reached there once, I should be able to reach there again. Computers aren't sentient (although I swear this phone enjoys tormenting me).
Does any body have any insight to why I would be going through this?
Why won't it reach download mode again?
Just fyi: I have literally tried every button combination I can suss from the countless threads I've scoured and scanned.
Thanks in advance for any insight anyone can provide.
Just to make sure, as I didn't see it in the post, you did do v+/v- and insert the usb cord from a powered off state, right?
Also, check the captivate connection issues thread in my signature if you haven't already.
Different reaction
Hey thank you! Your list is handy!
I'm shocked I hadn't stumbled upon it already, or your signature for that matter..
Seriously can't understand how this is the first time I've seen it.
I've tried the [FROM A POWERED-DOWN STATE - BATTERY REMOVED] procedures but none of them got me into download mode.
Thanks all the same.
I'll try the battery charging list next.
Quick (and possibly stupid) question : Does it matter if it's an official Samsung USB cable?
As I noted in my initial post, I managed to get into download mode earlier today (little Android digging my grave with the same cable I've been struggling with for the past six hours.
Luck!
omigodomigodomigodomigodomigodomigod
okay, so I managed to get into d/l mode by plugging to power (outlet usb) and then applying three buttons.
So:
Battery Out
Plugged into USB
Battery In
Hold VolUp+VolDown+Power
Android man digging my grave showed up.
It should be noted that this same process was conducted several times against my PC upon which the technique worked several hours (and several hundred attempts, and half a season of StarTrek TNG) ago.
...now what (lol!)
I guess I'll fire up Kies and conduct a few more hours of scouring!
well you COULD go about flashing roms and kernels and modems to your hearts delight. But I would advise against that. I'd recommend first backing up EVERYTHING. Especially your /efs (you'll need to be rooted) folder if your considering flashing a rom. Once you do that you're free to flash. Just be sure to read the OP of the rom to make sure you meet the requirements for the rom or kernel, such as if you have the right boot loaders. As long as you read, you really can't go wrong with the captivate.
Sent from my SGH-I897 using XDA App
I'm not entirely sure how the phone reached this state but according to all the stuff I've read, if the phone is in this state it's recoverable using Kies.
However Kies doesn't seem to care that I've got this phone plugged in.
Frankly, there's nothing to back up, and if flashing out with Odin is the only way to establish a working Captivate then I suppose i've got some files to download.
Does anybody have any insight regarding Kies and getting it to play nice nice?
Do you have Samsung drivers installed?
Personally, I have only got Kies to work when the phone was actually on.
Sent from my SGH-I897 using XDA App
If your in download mode, I suggest just flashing back to stock using heimdal.
(I don't use odin 1-click stocks because my first attempt at using it corrupted my bootloaders. My phone would power on, go through the AT&T screen for hours. I also could not enter recovery or download using 6 different methods including a jig. I lost hope and accidentally left my phone on when I went to bed. I wake up next morning and it booted up. I used terminal emulator from the market and used the command Reboot Download. I worked, then I flashed back to stock using hiemdal. I am not completely sure why I shared this story but w.e )