help help all inter my diamond dead dead no screen - Touch Diamond, MDA Compact IV General

i have diamond touch i try to unlock rom and i download SSPL when i cilick it <>restart my device and nothing
i try to start it usless try retry i connect it on computer no appear any plugin
i remove battry an reback it only smoe heat in diamond also when i connect charger some heat in diamond from behind(back)
translate from google >>>>>
I have a Diamond tried to work open the lock has worked him directly SSPL device turnoff
Did not work properly only a black screen separated the battery and was prepared, but to no avail. And reached the device to your computer is also not useful and got a charger, the device does not benefit just noticed heated by light from the back and also when I got the device to the computer I noticed the back of the heated light

where is answers ? where is solutions where is replys?

kasserx said:
where is answers ? where is solutions where is replys?
Click to expand...
Click to collapse
I can badly understand you.
If you have a problem to start your diamand, try a hardreset.

try the mtty and refiash any rom from xda by sync with your pc it will done

i think my diamond board damag

braunie said:
I can badly understand you.
If you have a problem to start your diamand, try a hardreset.
Click to expand...
Click to collapse
i have win7 i download mtty but usb options Not Available
and how can used it
how can make hardrest
note: I tried to make it to the 3 color mode and black screen but the device unfortunately.
my problem with sspl bcuz i make sspl not 4 diamond i think 4tytnii i put it on diamond now my diamond black screen in bootloader
i can not inter in bootloader or make any hardrest i think my board damag if you have soluions 4me tellme plz
also when i connect my diamond on computer no any usb detect only i feel i back diamond I feel a little heat

check the battery and try to format your device. if still not working then if your device is in warrenty then you have to visit htc service center in your area.

kasserx said:
i have win7 i download mtty but usb options Not Available
and how can used it
how can make hardrest
note: I tried to make it to the 3 color mode and black screen but the device unfortunately.
my problem with sspl bcuz i make sspl not 4 diamond i think 4tytnii i put it on diamond now my diamond black screen in bootloader
i can not inter in bootloader or make any hardrest i think my board damag if you have soluions 4me tellme plz
also when i connect my diamond on computer no any usb detect only i feel i back diamond I feel a little heat
Click to expand...
Click to collapse
How to make a hardreset:
http://hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
By making a hardreset press long the reset (>3 seconds) while you keep pushing the other bottons.

braunie said:
How to make a hardreset:
http://hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
By making a hardreset press long the reset (>3 seconds) while you keep pushing the other bottons.
Click to expand...
Click to collapse
thankx 4u i'll go to htc 4mantinance
ithink my board is damag

smarty84 said:
check the battery and try to format your device. if still not working then if your device is in warrenty then you have to visit htc service center in your area.
Click to expand...
Click to collapse
i try more time but useless thankx 4u i'll go to htc 4mantinance
ithink my board is damag

good luck for you

Related

Help!!! Tilt wont power on

My Tilt began having issues just the other day. The screen would periodically fade out and go white. I would soft reset and the screen would remain white. I was able to get into bootloader. Now i get no display and a green light on the ear piece is all i have.
Anyone have any clue if it's possible to fix this. I just got the phone on Friday and did Hard Spl by Sunday i was experiencing issues.
Any help or ideas would be great.
have you tried pulling the battery out for 10 minutes and letting the phone totally discharge?
i am trying that right now
still the same response. the device will not boot up
my first kaiser was dmaaged by myself. at night i wanted to reset the device. but the hole ist not like the hermes left of the usb jack its right of it so i didnt saw and didnt felt it and pushed my stick into the usb jack. at the hermes the usb jack was a board but in the kaiser the connectors are metal sticks with plasics around.
after pushin the stick into the jack the connectors were pushed down. at the next day the device had low battery cause the power adapter couldnt load the battery...
i phoned HTC and they couldn't offer any ideas aside from brining the device back.
when i plug in the device its recognized as a "data device" but i canot find drivers to enable activesync to address it. i feel like it's possible to flash it without activesync is this possible??
can't you just return it?
k_otix99 said:
i phoned HTC and they couldn't offer any ideas aside from brining the device back.
when i plug in the device its recognized as a "data device" but i canot find drivers to enable activesync to address it. i feel like it's possible to flash it without activesync is this possible??
Click to expand...
Click to collapse
Yes just download the HTC_ROM only that i just posted in the Kaiser upgrading sticky and put your phone into bootloader mode and run the Custom RUU and it should flash just fine
austinsnyc said:
Yes just download the HTC_ROM only that i just posted in the Kaiser upgrading sticky and put your phone into bootloader mode and run the Custom RUU and it should flash just fine
Click to expand...
Click to collapse
i cant tell if the device will go into bootloader. it will not light up totally black screen. I flashed the ATT rom you posted before it totally died hoping that it would reset the issue if it was software based. it didnt fix the issue though.
jallenclark said:
can't you just return it?
Click to expand...
Click to collapse
I plan on it but i hoped to be able to fix the issue myself. I have been able to fix my hermes in the past with the help of the XDA community.

Kill diamond / flash a rom from the device?

Hi all.
I've got a malfunctioning diamond, the data usb connectors must have been disconnected from the phone.
I want to send it in for repair, but i have a bepe rom on it, i am afraid my service provider wont repair it because of the voided warranty by flashing a non-stock rom on my device.
Is there anyway i can transfer the stockrom (yes i have it) to my device, and flash it from there? I can charge my device.
If not, is it possible to overclock the cpu so the device will be destroyed or something in that direction?
-Heien.
Well, you could try to find the problem yourself by using the service manual in the wiki. Or...I can think of many ways you could "destroy" the phone.
please give me inspiration ?
Recently I saw an option "microwave" which should be awesome good for bricking
Riel said:
Recently I saw an option "microwave" which should be awesome good for bricking
Click to expand...
Click to collapse
<3 best post here
Riel said:
Recently I saw an option "microwave" which should be awesome good for bricking
Click to expand...
Click to collapse
Microwaves leave serious burn marks on the PCB's absolutely not recommended, any technician will recognize the obvious tamper.
There are several ways to brick a device, but these kind of practices are not condoned here, so this info will not be made public!
(Don't even try to PM me about it, I will ignore all PM's regarding this question, no exceptions!)
@heien
A lose usb connector can sometimes easily be fixed by using an SMD rework station (if the PCB traces are undamaged.
If the traces are damaged, you'll be in need of a new main board.
The biggest job on the diamond is to disassemble it, it takes up a lot of time.
But the repair itself would be fairly simple.
Don't even try it with a soldering Iron (ext-usb leads have a small footprint), you should use an SMD/SMT hot air rework station, or better ask a mate who has the experience and access to equipment for these kind of repairs.
Best of luck,
EqX
if u are taking it for a hardware malfunction why be worried about what ROM do you have?
do u think they'll (technicians) check the ROM version you have? why bother? they'll dismantle it and repair/change the mother board. maybe you'll got a diamond with a new motherboard and a new-stock ROM.
@ eqx
Thank you for the very kind, but nerdy suggestion I'm afraid my ten thumbs would kill the phone permanently.
@Kukuriku
is this something you have experienced, or ? but i get your point, maybe i should just turn it in tomorrow..
Are you sure the problem is hardware related?
I have pretty much the same problem as you. My diamond can charge through the usb port but cannot be detected by any PC (I tried several PCs). I also use bepe rom (9.7).
jeanunit72 said:
Are you sure the problem is hardware related?
I have pretty much the same problem as you. My diamond can charge through the usb port but cannot be detected by any PC (I tried several PCs). I also use bepe rom (9.7).
Click to expand...
Click to collapse
even when it is in bootloader mode the phone cannot be detected by the pc?
karim099 said:
even when it is in bootloader mode the phone cannot be detected by the pc?
Click to expand...
Click to collapse
No. I have tried entering bootloader mode via bluetooth or with SSPL-Manual.exe but it’s still not detected.
The PC sometimes shows the "new peripheral detected" icon in the taskbar, but it disappears after a few seconds. The phone also shows me the menu (asking me to choose between activesync , storage disk and internet sharing).
PS: I have tried soft and hard resets
jeanunit72 said:
No. I have tried entering bootloader mode via bluetooth or with SSPL-Manual.exe but it’s still not detected.
The PC sometimes shows the "new peripheral detected" icon in the taskbar, but it disappears after a few seconds. The phone also shows me the menu (asking me to choose between activesync , storage disk and internet sharing).
Click to expand...
Click to collapse
bootloader via bluetooth? i mean the Tri color boot screen.
while the phone is off, press volume down and power it on.
then connect pc via usb. "usb should appear on screen"
try flashing other that bepe's rom. it might be a software issue.
karim099 said:
bootloader via bluetooth? i mean the Tri color boot screen.
while the phone is off, press volume down and power it on.
then connect pc via usb. "usb should appear on screen"
try flashing other that bepe's rom. it might be a software issue.
Click to expand...
Click to collapse
Thanks, but so far I haven't managed to get it to display "USB".
Either it shows "serial" or it shows nothing
basically my usb port is f***ed...
I'm stuck with a 1 month old phone that I can't flash or send back to orange for repair/exchange
+ I can only transfer files on it by bluetooth!

my diamond is dead

Hi guys,
my phone is dead after i ran a diamond unlocker software from some other site...
its not getting power on..i tried doing hard reset but no luck...
please help me guys my diamond is bricked.
how to repair it as it is not getting power on...
ironmaidon said:
Hi guys,
my phone is dead after i ran a diamond unlocker software from some other site...
its not getting power on..i tried doing hard reset but no luck...
please help me guys my diamond is bricked.
how to repair it as it is not getting power on...
Click to expand...
Click to collapse
Since we have no idea what this "unlocker software from some other site" does, you better ask the guys at "some other site"..
Hello.
I also have this problem.. Did some one have a answer to this problem?
I made a search and find more people with this problem, but still with the problem..
http://forum.xda-developers.com/showthread.php?t=440198&highlight=Diamond+Unlocker+bricked
http://forum.xda-developers.com/showthread.php?t=454342&highlight=Diamond+Unlocker+bricked
http://forum.xda-developers.com/showthread.php?t=509855&highlight=bricked
I try to unlock diamond gsm with Diamond Unlocker.exe that is to use with CDMA version
I hit Next, Next, Next until it got to progress bar it stayed on 0% then jumped to 100% and said that my device wasn't compatible or something like that, at that point the image on the diamond faded to black screen. I already try to boot in 3 colour menu but nothing happens(volume down+power+reset)..
When I plug it to pc nothing happens
does any one have any idea?
Best regards.

My Kaser is dead :(

I developed ROM. I take to my HTC new ROM. When I restarted kaiser it does not work. When I turn it on now I can see just black screen with text "Smart Mobility". Plese Help me. What can I do now.
vikki said:
I developed ROM. I take to my HTC new ROM. When I restarted kaiser it does not work. When I turn it on now I can see just black screen with text "Smart Mobility". Plese Help me. What can I do now.
Click to expand...
Click to collapse
Try to put into bootloader, press camera and power button and while holding both in, do a soft reset. Once in bootloader, try to flash the original Orange rom.
Is it showing any signs of life at all ?
thanx ... it is wokrking ... thanx a lot
hi
i have htc kaiser 130
it does not work. When I turn it on now I can see just black screen with text "Smart Mobility". Plese Help me. What can I do now
whan i connect wid usp into my pc its connected but active sync is not gren i wana flash but how i have rom and bootloder
also sand me windows mobile 6 for my kaiser phone
plz and tell me how can i istal in2 phone
so that i do plz gave me idea thanks repaly
kashifhafeez said:
i have htc kaiser 130
it does not work. When I turn it on now I can see just black screen with text "Smart Mobility". Plese Help me. What can I do now
whan i connect wid usp into my pc its connected but active sync is not gren i wana flash but how i have rom and bootloder
also sand me windows mobile 6 for my kaiser phone
plz and tell me how can i istal in2 phone
so that i do plz gave me idea thanks repaly
Click to expand...
Click to collapse
No Offense but, Was that even English?
I think I gathered from this, "also sand me windows mobile 6 for my kaiser phone" that you want someone to send you Windows Mobile for your phone. If that's the case, boy, you should read the forum rules. Search Around and guess what? You will Find all types of Windows Mobile 6 ROMs for your Kaiser!

my HTC Breeze does not turn on

hi guys,
i hope i can bring to life my breeze again. i flashed my device with the futureshock rom. all works fine but the simlock was inside the breeze. i read a lot about sim unlock but have had no success. some day a guy told me that he want to try to unlock it. he flash a hsdpl (i don't know which one) and after this the brezze don't want to boot again. no tricolor (push on/off with camera buttom). my activesync got no connection. my device manager can not indicate the breeze when i conect it with the usb cable.
do i have a chance to get runnig it again?
thanks a lot
stagger
has anybody an idea, or suggestion? or is it damaged? unfortunatelly i dont know which version of spl he has install.
thanks
Stagger467 said:
has anybody an idea, or suggestion? or is it damaged? unfortunatelly i dont know which version of spl he has install.
thanks
Click to expand...
Click to collapse
Sounds like a death battery to me...
Try charging for one hour.., Then try to turn it on..
I don't think it does mathers if your phone is locked...,
Let me know the result
it charged my battery over 2h. nothing ....i can not turn on my breeze. the first minute i got a red charging light. like everything is ok.
i got no connection with my xp pc and active sync. the device manager can not detect the breeze. so i can not install any other boot program
any other ideas?
thanks
I had the same problem, it was hardware related though.
There are two little metal contacts that ground the battery cover, well one of them slipped though a little and was shorting pins on the motherboard. So fortunately nothing blew and it just was not turned on.
So obviously there is some form of protection from shorts that it will not power on.
Anyway check if it will turn on if only the motherboard, LCD and battery is plugged, without housing or anything else. Be sure that the back of the battery does not get into contact with the MB if you are going to try.
Good luck, hope you get it fixed..

Categories

Resources