[Q] How to access LBSTESTMODE in Froyo? - Captivate Q&A, Help & Troubleshooting

In the past we were able to get to our GPS settings by opening dialer and dialing the following number. This will not call anyone - it is a code shortcut to the settings:
*#*#1472365#*#*
However, under Froyo 2.2 rooted with SU access, I am unable to get to LBSTESTMODE
I am having issues with my GPS not locking, it started after I rooted the Froyo. I was informed rooting is not what caused the problem in another thread....so been googling to fix the issue and ran into the old code above
Please advice
Regards

There is an app in the market called lbstestmode that works. The dial pad # to enter lbstestmode disappeared in jh7 and was still missing in ji6.

When I go to the market, the app is unavailable to me. I then went to the apps website and tried to get it to download using the samsung captivate browser but it kicked me back to same thing on the Apps Market
So, I am thinking is it possible somewhere in process of my upgrading and rooting the phone got locked accidently since I am new to the whole process of understanding development? (I have superuser access and ability to eliminate apps using titanium back up so its more of an elimination of issues question)
Regards

dayv said:
There is an app in the market called lbstestmode that works. The dial pad # to enter lbstestmode disappeared in jh7 and was still missing in ji6.
Click to expand...
Click to collapse
If you mean LbsTestModeLaunch, this was actually removed per Samsung's request.
As an alternative, you can download "Any Cut" from the Market, then create an activity shortcut for LbsTestMode.

aloant said:
If you mean LbsTestModeLaunch, this was actually removed per Samsung's request.
As an alternative, you can download "Any Cut" from the Market, then create an activity shortcut for LbsTestMode.
Click to expand...
Click to collapse
Thank You for your response
I was able to download the app. Would you please share or link how to create " a activity shortcut" for LbsTest Mode?
I am new to the whole process and dont want to create incidental problems for myself
Regards,

Roism said:
Thank You for your response
I was able to download the app. Would you please share or link how to create " a activity shortcut" for LbsTest Mode?
I am new to the whole process and dont want to create incidental problems for myself
Regards,
Click to expand...
Click to collapse
There seems to be 2 "Any Cut" apps - to be clear, the one I'm using is by "Jeff Hamilton."
In Any Cut, select New Shortcut, then Activity. It may take a while to load... Scroll and find LbsTestMode, then tap OK. You should now have a shortcut in your home screen.

aloant said:
There seems to be 2 "Any Cut" apps - to be clear, the one I'm using is by "Jeff Hamilton."
In Any Cut, select New Shortcut, then Activity. It may take a while to load... Scroll and find LbsTestMode, then tap OK. You should now have a shortcut in your home screen.
Click to expand...
Click to collapse
Thank you for your response. You have lit a path to enlightment for me ;-)
I found and created it. I will post my ability to resolve my GPS issue in next 24 hrs as I am now few beers down......with Oakland Raiders having a close game with San Diego Chargers.....
Regards,

So I was able to access the LbsTestMode based on instruction given and was able to fo through the following steps of "old instructions" that I was able to google......pasted below
•Step 1 -- Open menu > settings > Location & Security. Uncheck the box next to "Use Wireless Networks"
•Step 2 --follow the procedure in the "advice posted in comments above"
•Step 3 -- In the LBSTestMode menu, press “Application Settings” and change “Operation Mode” to “MS Based.”
•Step 4 -- In the LBSTestMode menu, find “SUPL/CP Settings” and change the SERVER & PORT to supl.google.com and port 7276 (DO NOT use www. in front of supl !)
•Step 5 -- Reboot your phone.
•Step 6 -- Open menu > settings > Location & Security. Check the box next to "Use Wireless Networks"
After follwing the steps above still no go? I used an app called GPS test to verify my location
Please advice
Regards,

Turn off SUPL Secure Socket as well. I am using AGPS Mode Control Plane. I've used both, this is where I've set it of late. Also, run the Get Position Test and see if it can lock on a position. Try to do this where you'll get a strong signal from many satellites (i.e., outside). Then leave LbsTestMode running, hit Home and open Maps. See if it can find your location. It should locate you assuming you got a good lock in LBSTestMode.
I've been openingLBSTestMode first and I leave it running in the background and then open Navigation. I haven't yet determined whether this has an actual benefit, is just a habit I don't want to break, or my own superstition, but that's what I do. There was discussion that some of the LbsTestMode settings don't persist after closing LbsTestMode, so this is one way to make sure the settings remain active.

The code in froyo is *#*#3214789650#*#*
this code doesn't seem to be disseminated too widely on the forums, spread the word

Thanks you all who responded on my issue. My issue has now been resolved
I was able to update my location and GPS is working fine
Regards

mobius911 said:
Turn off SUPL Secure Socket as well. I am using AGPS Mode Control Plane. I've used both, this is where I've set it of late. Also, run the Get Position Test and see if it can lock on a position. Try to do this where you'll get a strong signal from many satellites (i.e., outside). Then leave LbsTestMode running, hit Home and open Maps. See if it can find your location. It should locate you assuming you got a good lock in LBSTestMode.
I've been openingLBSTestMode first and I leave it running in the background and then open Navigation. I haven't yet determined whether this has an actual benefit, is just a habit I don't want to break, or my own superstition, but that's what I do. There was discussion that some of the LbsTestMode settings don't persist after closing LbsTestMode, so this is one way to make sure the settings remain active.
Click to expand...
Click to collapse
Hey thanks a lot this really worked well for me. I had just forced the update using mini Kies and still no luck with accurate GPS location but after I followed the steps outlined in lbstestmodelaunch and what you added I found my location was accurate to within a few meters.

The code in froyo is *#*#3214789650#*#*
this code doesn't seem to be disseminated too widely on the forums, spread the word
Spread the word, my GPS with your settings is accurate from 50 meters.. and it locks in 5 secs

The code in froyo is *#*#3214789650#*#*
this code doesn't seem to be disseminated too widely on the forums, spread the word

Original settings:
Operation Mode: Standalone
SERVER: www.spirent-lcs.com
PORT: 7275

oriveradel said:
The code in froyo is *#*#3214789650#*#*
this code doesn't seem to be disseminated too widely on the forums, spread the word
Click to expand...
Click to collapse
Actually, this works on my stock Eclair 2.1.

Working!
m7ia said:
The code in froyo is *#*#3214789650#*#*
this code doesn't seem to be disseminated too widely on the forums, spread the word
Click to expand...
Click to collapse
FWIW - the above didn't work in my 2.2'd Galaxy S, nor did the older code. I eventually got the Any Cut app (great!) and followed the instructions.
For the last 2 weeks, since the 2.2 update, I was basically unable to get any GPS lock. I did manage once - and it took 15 minutes, with 8 to 10 satellites available.
Now, with 2 or 3, I'm getting a lock in a few seconds.
If the main problem is that the web location setting for info is just flat-out wrong, why doesn't T-Mob just issue a fix for that? It seems very strange to me that this would continue to be an issue months after the rollout began.

Umm, there is SGS Tools in the Themes &Apps section that will allow access to it.
Sent from my GT-I9000 using XDA App

After this change, Google Maps = total crash???
So I did the change, and thought things were good. But about 3 out of 4 times, when trying to start Google Maps, it freezes, then the screen goes completely black, and there is a vibration-buzz, a pause, and two more buzzes. The phone appears totally dead. Only pulling the battery wakes it up.
To be clear, I changed the URL and port, and disabled the secure socket mode, as described in this thread. There was also and update of google maps received, which claims to have installed successfully.
So now GPS is great, but the main app I use it with is defunct.

LBSTESTMODE Not On Phone!
Before you say I know this is Samsung Captivate but I have no where else to post this.
I have a Samsung Galaxy Apollo i5801 on Orange UK and I do not seem to have the LBSTESTMODE menu when I create a activity via anycut or ADW launcher. I type in the LBSTESTMODE number on the dialler and nothing comes up, I did find however I had something called "Service mode" when I tried to launch LBSTESTMODE however this application crashed and said "android.something.something has crashed"
Please help me my I would really like to fix my GPS!
Info:
Carrier: Orange UK
Device: Samsung Galaxy Apollo i5801
Operating System: Android 2.2 Froyo
Baseband Version: I5801BVJP1
Kernel Version: 2.6.32.9 [email protected] #1
Build Number: FROYO.BVJPE
Hope That Helps!

Related

Auto-start GPS recieve when using Google Maps...Possible?

OK..Hope this is the proper place to post this...
I am horrible at remembering to charge my phone, thus I don't keep GPS on at all time because of battery drain. However, I find it frustrating that every time I start Google maps that I have to enable the GPS. It seems to me that there should be a function built into that app which would enable the user to have it automagically enable the GPS reciever on the apps start up. To my knowledge this isn't possible but I feel it would be very useful. So, does anyone know how one would achieve this? Would it be possible to write a script that would accomplish this?
Thanks in advance for the input.
Menu button, Settings, Security & Location, set "Enable GPS satelites"
if you enable gps it wont actually turn on until you open google maps or a location based program (you will see a satellite dish at the top letting you know if it is on). the gps setting basically just tells the phone if a program requests gps location it is okay to turn the gps antenna on.
otherwise its off and battery doesn't get affected
Thanks...
Hey dk75 & averma, thanks for the posts. I should really read the fine print on some of these menu options prior to asking these questions...oops!
Hello!
My wife and me use latitude (from google) to see where we are on Google maps. Latitude works best if the GPS is on. HOWEVER, we just need to see each other on google maps when we are driving home (between 17:00 and 18:00). If i turn on the gps, latitude will eat the battery the whole DAY...) I would like to know if there is a way to schedule the activation of the gps...
pbecks1963 said:
Hello!
My wife and me use latitude (from google) to see where we are on Google maps. Latitude works best if the GPS is on. HOWEVER, we just need to see each other on google maps when we are driving home (between 17:00 and 18:00). If i turn on the gps, latitude will eat the battery the whole DAY...) I would like to know if there is a way to schedule the activation of the gps...
Click to expand...
Click to collapse
Try looking up "Locale" on the market. App isn't free, but most of the plugins for it are, and you can combine the functions of the plugins to do almost anything.
I use it for exactly what you're talking about myself.
Google Maps doesn't Auto-start GPS
Hi all,
I know this thread is pretty old but hoping for a reply all the same. I'm using the Galaxy S in the Uk with Google Maps & Navigation. I used to have the HTC HERO running maps & navigation and whenever I started either of those apps, the little atenna would appear to show that it was trying to find a gps position.
However, on my Galaxy S, whenever I start Maps or Navigation nothing happens. Even though I have "use wireless networks" and "use GPS satallites" both checked.
I cant imagine that technology would have taken a step back from such a useful feature and it is really irritating having to remember to disable/enable GPS (using SwitchPro home screen widget) before being able to use Maps or Navigation.
Anyone have any ideas how to fix this??
Install Tasker app and create a profile that enables GPS when you run Maps app.
tasker
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic
[TUT] Enable GPS automatically for Maps
[email protected] said:
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic
Click to expand...
Click to collapse
i have spent sometime now lurking behind the scenes in this group and
have read, in detail, my share of the posts. Make no mistake, the
guys here are experts and being experts their methods/explanation
often goes way over the head of the typical noob. this post is to
introduce this wonderful application of tasker to the inimitable
noob. i hope my effort would ease someone's labour.
imagine this scenario: you switch on maps on your phone and keep
wondering why it does not show your precise location and then it hits
you! you did not switch on your GPS. this post explains how to create
a profile that switches on your GPS automatically when you fire up
maps.
Just remember this: Profile is the context i.e. what you want to do.
in the present case, you want to first start maps and when maps is
started you want to switch on GPS. then when you exit maps, you want
GPS to be switched off. this is the object.
Stage 1: In profile tab click the + sign. give a name like 'MAP'.
this name will identify the profile that is currently active. after
you name it press the green tick and you are shown several options
like application, time, day etc. Now maps come under applications, so
press applications and all the appliations in your phone are
displayed. scroll down and select maps and press the tick mark. at
this stage you have told tasker that whatever you want to do revolves
around maps.
Stage 2: Now that you have hinted to tasker about the application
that is to be run, we should next state what should happen when the
appliation is started. after you press the tick mark you will be
shown a window asking for task selection. press new task and give it
a name like switch on GPS.
Stage 3: after baptising the task, you will be taken to a broad
window . press the + mark on the bottom left and the confusion
begins. a pletora of options is thrown at you (this is why tasker is
so darn powerful). this is called the 'select action category'.
digressing a little here you should know that google has changed
something with android and you cannot in the usual course toggle GPS.
so you should download an app called 'secure settings' (from google
play) and install it. once it is installed open it and it gives you an
option to install a helper. install the helper also. this activates
the GPS option.
Stage 4: once that process is completed, come back to tasker and get
yourself to the 'select action category'. here press on plugin and
then on secure settings. in the next window, touch 'edit' and then
scroll down to GPS and touch it. three options are displayed viz. on,
off and toggle. choose on and press the floppy disk icon to the
bottom left. press the tick mark and again press the tick mark. at
this stage you have succeeded in activating GPS when maps is started.
however, when you exit maps you find that GPS does not switch off by
itself.
Stage 5: to make it switch off by itself, you need to create the same
task again. just long press on the task which has already been
created (called here as switch on GPS) and you are presented with
several options. select the first one - 'add exit task' and follow
the process as in stage 4. however, instead of choosing 'on' select
'off' this time. once this is done come out and test it.
Stage 6 - and the most important - Feel happy and satisfied.
i am sure there should be some easier way to do this. however, in my
limited understanding of tasker this was how i did it. i really am
confused about the variables. i hope someone will help. when i say
confused, i should clarify that i have no inkling of what it does. :
( could someone tell me where to read up on it? i have searched on
google and i havent found any satisfactory explanation.
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM
the power of automation
capaxdoli said:
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM
Click to expand...
Click to collapse
Thank you for your post, I wouldn't be able to do it without you man!
I have a question. I'm using LBE security master which monitor my firewall, wifi, adware, etc. is there a way for tasker to check in LBE firewall and toggle my wifi/data when I want it? instead of creating a new profile for ON/OFF wifi. I just want it to look in my app and see what app has permission to what and allow/un-allow.
Thanks again!
[email protected] said:
tasker does not let you autostart gps... is there any other way. i also hate having to turn on gps and right under enable gps in blue words under settings it says< uses more battery. i can send pic
Click to expand...
Click to collapse
Yes is does autostart if you want with tasker..
Verstuurd van mijn GT-I9000 met Tapatalk
You can use the "Auto-Enable GPS for Maps" application, which switches both WiFi and GPS on when you launch Maps, Navigation, Local or Latitude, and restores them to their old state (e.g. switched off) when you quit these apps.
capaxdoli said:
i have spent sometime now lurking behind the scenes in this group and
have read, in detail, my share of the posts. Make no mistake, the
guys here are experts and being experts their methods/explanation
often goes way over the head of the typical noob. this post is to
introduce this wonderful application of tasker to the inimitable
noob. i hope my effort would ease someone's labour.
imagine this scenario: you switch on maps on your phone and keep
wondering why it does not show your precise location and then it hits
you! you did not switch on your GPS. this post explains how to create
a profile that switches on your GPS automatically when you fire up
maps.
Just remember this: Profile is the context i.e. what you want to do.
in the present case, you want to first start maps and when maps is
started you want to switch on GPS. then when you exit maps, you want
GPS to be switched off. this is the object.
Stage 1: In profile tab click the + sign. give a name like 'MAP'.
this name will identify the profile that is currently active. after
you name it press the green tick and you are shown several options
like application, time, day etc. Now maps come under applications, so
press applications and all the appliations in your phone are
displayed. scroll down and select maps and press the tick mark. at
this stage you have told tasker that whatever you want to do revolves
around maps.
Stage 2: Now that you have hinted to tasker about the application
that is to be run, we should next state what should happen when the
appliation is started. after you press the tick mark you will be
shown a window asking for task selection. press new task and give it
a name like switch on GPS.
Stage 3: after baptising the task, you will be taken to a broad
window . press the + mark on the bottom left and the confusion
begins. a pletora of options is thrown at you (this is why tasker is
so darn powerful). this is called the 'select action category'.
digressing a little here you should know that google has changed
something with android and you cannot in the usual course toggle GPS.
so you should download an app called 'secure settings' (from google
play) and install it. once it is installed open it and it gives you an
option to install a helper. install the helper also. this activates
the GPS option.
Stage 4: once that process is completed, come back to tasker and get
yourself to the 'select action category'. here press on plugin and
then on secure settings. in the next window, touch 'edit' and then
scroll down to GPS and touch it. three options are displayed viz. on,
off and toggle. choose on and press the floppy disk icon to the
bottom left. press the tick mark and again press the tick mark. at
this stage you have succeeded in activating GPS when maps is started.
however, when you exit maps you find that GPS does not switch off by
itself.
Stage 5: to make it switch off by itself, you need to create the same
task again. just long press on the task which has already been
created (called here as switch on GPS) and you are presented with
several options. select the first one - 'add exit task' and follow
the process as in stage 4. however, instead of choosing 'on' select
'off' this time. once this is done come out and test it.
Stage 6 - and the most important - Feel happy and satisfied.
i am sure there should be some easier way to do this. however, in my
limited understanding of tasker this was how i did it. i really am
confused about the variables. i hope someone will help. when i say
confused, i should clarify that i have no inkling of what it does. :
( could someone tell me where to read up on it? i have searched on
google and i havent found any satisfactory explanation.
i will continue to post my profiles and i hope it is of help to the
group here.
J.RAM
Click to expand...
Click to collapse
How to enable the location settings along with the GPS ON task?

Need to turn on locations (google maps/square)

the error i get is "please enable my location source in system settings" in google maps.
I have already done the "Google location services fix (formerly, Twitter client recommendations?)"
any other suggestions?
Thanks
Chris
Spanel said:
the error i get is "please enable my location source in system settings" in google maps.
I have already done the "Google location services fix (formerly, Twitter client recommendations?)"
any other suggestions?
Thanks
Chris
Click to expand...
Click to collapse
AFAICT all that does is fix dependencies - it definitely doesn't activate locations. You are still missing NetworkLocation.apk, among other things. I am trying to figure it out; it might require pushing a more rhobust settings.apk.
I am going to start digging around in the nook source to see if I can make sense of how they castrated settings. I think that might be the best way to attack this problem.
Sent from my NOOKcolor using XDA app
ok thanks! keep this thread updated with your findings.
thanks again!
Chris
A side effect I just found of following the instructions to get the Market working here- http://nookdevs.com/Enable_the_Android_Market
is that Network Location is working.
When I run maps I have the indicator for where I am.
I will be testing how accurate this is tomorrow- I have a long drive to do and will tether to my Droid with gps running.
With luck, the droid will relay location data to the nook over the network.
Pass or fail, I will post the results once I know.
Good to hear, but you're probably getting a position via WiFi and GPS data can't be passed on via tethering AFAIK so you can't get it off the Droid.
I know that the GPS data can't be passed on per se and that I am getting network location data via wifi- 100% agreement.
My hope, and no testing yet to verify, is that if the Droid knows its location by GPS it will pass it along as a Network Location since it is providing Network Services so to speak.
I have no documentation saying this will happen, just pure speculation and wishful thinking.
OK - that is nice guys, but Spanel (and include me as well) have run the location fix and we still get the error: ""please enable my location source in system settings".
I have most everything working and running: rooted, Market, maps installed and working - but for whatever reason, maps does not display my location - just the aforementioned error message when I do.
Note: I also followed http://nookdevs.com/NookColor_Install_missing_google_geolocate_library, completed it with no errors - but still, my wifi - location is not popping up.
rogerdugans said:
A side effect I just found of following the instructions to get the Market working here- http://nookdevs.com/Enable_the_Android_Market
is that Network Location is working.
When I run maps I have the indicator for where I am.
I will be testing how accurate this is tomorrow- I have a long drive to do and will tether to my Droid with gps running.
With luck, the droid will relay location data to the nook over the network.
Pass or fail, I will post the results once I know.
Click to expand...
Click to collapse
Strange, as I followed it as well but I do not.
Sent from my NOOKcolor using XDA
rad131304 said:
Strange, as I followed it as well but I do not.
Sent from my NOOKcolor using XDA
Click to expand...
Click to collapse
Th8is might be a side effect of when performing the initial Android setup portion of the process, the first question asks info regarding location, etc. I unchecked these options (knowing I dont have GPS) and am thinking this may be where it is being "enabled."
Just a thought.
norkoastal said:
Th8is might be a side effect of when performing the initial Android setup portion of the process, the first question asks info regarding location, etc. I unchecked these options (knowing I dont have GPS) and am thinking this may be where it is being "enabled."
Just a thought.
Click to expand...
Click to collapse
Nork - are you saying that you are, in fact, getting a wifi-location fix on your device?
So does anyone have WiFi location up and running ? In Maps, I get the "please enable location" popup and even with "NookColor Tools" (http://forum.xda-developers.com/showthread.php?t=868366) that shows a ton of hidden settings I don't have location either.
The Autonooter author suggested I install NetworkLocation.apk to fix that, but I still get "Please enable a MyLocation source in system settings, anyone ?
webvan said:
The Autonooter author suggested I install NetworkLocation.apk to fix that, but I still get "Please enable a MyLocation source in system settings, anyone ?
Click to expand...
Click to collapse
From what I've seen, that is normal. I just skipped that screen. I am getting a wifi location fix though which is very cool.
Yes Autonooter activates WiFi location, not the scripts though for some reason.
I JUST got my wifi to work in maps -- figured it out after a bunch of frustrated digging -- by editing the com.android.settings_preferences.xml and adding the line
<boolean name="location_wifi" value="true" />
(I did it in the text editing option in the Root Explorer App after making the system folder R/W, but if your use your favorite editor [command-line or otherwise] at will)
since that xml file, for me, only had a "location_gps"="false argument."
Granted I had also replaced the Settings.apk with a 2.1 build 2 stock one and pushed a stock NetworkLocation.apk, neither of which, by my tests, would make maps zero in on my wifi-based location. Going to restore the NookSettings app and see if this holds.
EDIT: Yes. editing com.android.settings_preferences.xml seems to do the trick. Mileage varies, perhaps, as they say.
EDIT2: That file WAS in /data/data/com.android.settings/shared_prefs/ but it seems to have disappeared since I pushed back the NC Settings.apk -- though while I had the stock 2.1 settings.apk installed, the xml file was there, and Google Maps did use my wifi to locate my position. Now that I've pushed back Settings.apk, Maps still finds my location via wifi. Freaky, quirky, but if you want to be able to use the wifi-location finder feature, this is how I got mine to work:
1. Installed a stock NetworkLocations.apk from a 2.1 build,
2. Renamed Settings.apk -> Settings.old
3. ADB installed stock 2.1 settings.apk
4. Enabled wifi location, which now has an option to "set my location"
5. tested Maps application, no dice.
5. edited the XML file as above -- /data/data/com.android.settings/shared_prefs/com.android.settings_preferences.xml
6. tested on maps, success!
7. then removed the 2.1 stock Settings.apk.
8. Renamed Settings.old -> Settings.apk.
I'm sure there is a muuuuuuch easier way to do this, but I'm a total noob. Anybody else have any success?
(The stock Android 2.1 Settings.apk crashed too frequently, anyways, and is annoyingly unreadable with the NC skinning).
I think the process I outlined here will do it for ya...
All you need to do is change the location_provider_allowed field in the secure table in settings.db to network.
Sent from my LogicPD Zoom2 using Tapatalk
fortuno01 Can this be done through Android Commander? Where is the settings.db file, ie which folder?
Also can someone post a clean working NetworkLocation.apk file. I see many on the web.
Finally got it working! Its a festivus miracle!
Alright, so after some playing around, I finally got this working. I used steps similar to above on a win 7 PC. Its all based on the /data/data/com.android.settings/shared_prefs/com.android.settings_preferences.xml file. But you wont have one until you install this apk.
Step one. Download and install attached NetworkLocation.apk with ADB.
Step two. Use android commander (Google it, its free) and navigate to the file.
Note when you first run AC, it will ask which os you are using. I say I dont know, mostly because I'm lazy. Its 2.1 of course.
Step three. Pull the .xml file to desktop and open with notepad.
Step four. Add this as the last line in this file. <boolean name="location_wifi" value="true" />
Step five. Save and Close
Step six. Drag and drop into right panel of android commander where original file was. AC will ask you if you want to place on the right panel. Yes, you do.
Step seven. Exit adb.
Step eight. REBOOT. Dont try before a reboot *it wont work*
Step nine. Please thank me if this works for you.
Merry Christmas.
Where do you get the stock 2.1 apk OS files? (I got your attachment). I have the SDK installed are they in there somewhere or can I pull them from the android developers site somewhere? Thanks.

Easy GPS bluetoothed from your Android Phones. No ADB needed.

1. Download and install "ShareGPS" from market on your phone.
once the app is installed
make sure in the App's setting, check "Use bluetooth" and "Create NMEA"
2. Download and install "Bluetooth GPS provider" from market on your tablet.
once the app is installed
make sure you have these settings:
in the app preferences
check "Force"
check "Raw HDOP"
GPS type is set to "MTK"
Update rate is set to "10Hz"
SBAS is Enable
Next
on your phone, open sharegps, then bring up the menu, click make discoverable once.
then go to your tablet, bring up the bluetooth gps provider app,
go in to the preference, click chose GPS provider, do a scan, you should see your phone come up.
click on it.
you are all set.
Now setup the bluetooth gps provider widget on one of your home screens.
every time before your run any navigation apps on the tablet just make sure you go back to your phone,
bring up shareGPS,
bring up Menu and click Make discoverable.
then go to your tablet, and click once on the bluetooth gps widget.
if the widget turns "green", you have working gps on your tablet.
if the widget turns "red", meaning that your devices aren't pair correctly, just re-scan/re-pair your devices.
*** Also make sure you have "Allow mock locations" checked as well on your tablet. And that's in menu, setting, application, development.
Enjoy
** edited
Found an issue with share gps, while it works fine on any 2.2 ROM on your phone, but the nmea output is way off in certain area on 2.3 based ROMs. After a little bit of researching, I found that BlueNMEA works very well.
You can find it in market, disregard the rating, the app is very easy to use and just may take a couple of tries to pair both devices.
So use blueNMEA instead of shareGPS on your phone..
Also fo for those who are not able to find these apps, here is how I did it..
Downloaded all apps from market on phone.
Use rootexplorer and look in /data/app
Find those apps, copy and paste onto your sd card.
Then transfer over to the tablet.
Install.
I cannot get my market to find "bluetooth GPS provider" even after preforming the market fix several times. Can you post the apk?
thebrain73 said:
I cannot get my market to find "bluetooth GPS provider" even after preforming the market fix several times. Can you post the apk?
Click to expand...
Click to collapse
Same here I only come up with network info II. But I see it in the market on my phone
I found it here http://www.filecrop.com/54831309/index.html
Working good for me on Vegan 5
thanks inbound
Edited for spelling, for some reason I was giving the western keyboard a second chance.
there is also tetheredGPS which started for the nook - has both client and server widgets included.
Works pretty well, over specific wifi port, and doesnt require both wifi and bluetooth to be on. power saver!

BT Tether WiFi-based Location (no GPS) to save battery?

Hi,
I was wondering if it was possible to tether the wifi based location data to the gear (running null) from a phone. I know it is possible to tether the GPS data (see http://forum.xda-developers.com/showthread.php?p=47857358#post47857358), but this will require a lot of power on the phone. Wifi needs a lot less power and works for most purposes good enough in big city with a lot of wifi access points.
skyworxx said:
Hi,
I was wondering if it was possible to tether the wifi based location data to the gear (running null) from a phone. I know it is possible to tether the GPS data (see http://forum.xda-developers.com/showthread.php?p=47857358#post47857358), but this will require a lot of power on the phone. Wifi needs a lot less power and works for most purposes good enough in big city with a lot of wifi access points.
Click to expand...
Click to collapse
did you find an answer???
I am also interested with this,
thanks
Hi,
I am also interrested in having my location available on the gear without having to drain the battery using gps or have to start/stop the gps tether on both phone and gear when I need it. So having done some android development I tried to put together a small app that enables you to use three modes for location tethering, off, wifi/cell or gps. The wifi/cell updates every 5 minutes if the location has moved 100 meters or more. The setting can be changed on the phone or on the gear. I have tested it on my stock S4 and gear with null_13 so it may not work in other situations and as it is my first test I do not guarantee it will work in all situations or that it will not crash your devices.
The app must be installed on both phone and gear, it is signed with my debug certificate so you must enable app install from untrusted sources.
This is my first contribution to the community so I hope I have done it in the right way.
Regards
Martin
Get the app from http://forum.xda-developers.com/showpost.php?p=48333080&postcount=5
link is not working
mohlsson said:
Hi,
I am also interrested in having my location available on the gear without having to drain the battery using gps or have to start/stop the gps tether on both phone and gear when I need it. So having done some android development I tried to put together a small app that enables you to use three modes for location tethering, off, wifi/cell or gps. The wifi/cell updates every 5 minutes if the location has moved 100 meters or more. The setting can be changed on the phone or on the gear. I have tested it on my stock S4 and gear with null_13 so it may not work in other situations and as it is my first test I do not guarantee it will work in all situations or that it will not crash your devices.
The app must be installed on both phone and gear, it is signed with my debug certificate so you must enable app install from untrusted sources.
This is my first contribution to the community so I hope I have done it in the right way.
Regards
Martin
Click to expand...
Click to collapse
link is not working.... can't download
Uploaded to github
I hope this works for everyone interested, the project is now on github. As a new user here I cannot post direct links so here goes
Screenshot:
raw.github.com/Mohlsson/GearLocationBridge/master/device-2013-12-08-162923.png
Install and run the apk on both gear and phone
github.com/Mohlsson/GearLocationBridge/blob/master/bin/GearLocationBridge.apk?raw=true
/Martin
I was able to get it installed and was able to select connection method but neither worked in google maps to pull my location.
well done
works for me, get location now on Gear without GPS.... great for Google Now / Search / Weather etc
Thanks
I must have something else going on. I can't get the "old" manual way of Share GPS to work either. It used to work but now it doesn't. I know this is off topic but I'm having trouble with Autoremote BT as well. I'm working in another thread to get it working but since both don't seem to be working, they must be related to my BT connection but for the life of me I can't figure out what. Everything else seems to work great, I get notifications, the stock weather app updates correctly, and other items like mini gallery and pedometer work.
Feeling lost and confused.
triplerider said:
I must have something else going on. I can't get the "old" manual way of Share GPS to work either. It used to work but now it doesn't. I know this is off topic but I'm having trouble with Autoremote BT as well. I'm working in another thread to get it working but since both don't seem to be working, they must be related to my BT connection but for the life of me I can't figure out what. Everything else seems to work great, I get notifications, the stock weather app updates correctly, and other items like mini gallery and pedometer work.
Feeling lost and confused.
Click to expand...
Click to collapse
Let see if we can help you getting my app to work by first looking at the app status. What does the title in my app say on the phone and on the gear (sorry to ask, you did install it on both right?) when you run it? If it says "Gear connected" and "Phone connected" BT communications work. If it says "Waiting for connection" there are problems opening the BT connection. If it says "Restarting" the connection has been made and then lost.
/Martin
mohlsson said:
Let see if we can help you getting my app to work by first looking at the app status. What does the title in my app say on the phone and on the gear (sorry to ask, you did install it on both right?) when you run it? If it says "Gear connected" and "Phone connected" BT communications work. If it says "Waiting for connection" there are problems opening the BT connection. If it says "Restarting" the connection has been made and then lost.
/Martin
Click to expand...
Click to collapse
They both said connected and as I would make different selections it would change on the other device. But no actual location service on the gear (as mentioned, the previously working Sharegps app also isn't working but also shows connected).
triplerider said:
They both said connected and as I would make different selections it would change on the other device. But no actual location service on the gear (as mentioned, the previously working Sharegps app also isn't working but also shows connected).
Click to expand...
Click to collapse
Ok, good! Next check that I can think of is that mock locations is allowed in developer settings on the gear and Use GPS is checked i the phone settings.
/Martin
mohlsson said:
Ok, good! Next check that I can think of is that mock locations is allowed in developer settings on the gear and Use GPS is checked i the phone settings.
/Martin
Click to expand...
Click to collapse
Checked these things again thinking maybe one of them got unchecked but sadly they are correct and still no joy.
Sent from my SPH-L720 using Tapatalk
mohlsson said:
I hope this works for everyone interested, the project is now on github. As a new user here I cannot post direct links so here goes
Screenshot:
raw.github.com/Mohlsson/GearLocationBridge/master/device-2013-12-08-162923.png
Install and run the apk on both gear and phone
github.com/Mohlsson/GearLocationBridge/blob/master/bin/GearLocationBridge.apk?raw=true
/Martin
Click to expand...
Click to collapse
Very Interesting. Installed and working!
Edit: NOT Working, Still has ShareGPS running. Once that was turned off Gear no longer gets location, Withing Maps it says "Waiting for location" when I try and get it. All other settings are correct.
Edit: A restart of both devices has fixed the issue. (But needed to wait for the app to update)
Would be nice if we could have it update our location at specific intervals.
New version of GearLocationBridge
Hi all!
I have been using my app for a week now and found some bugs that i fixed. I also added settings for network location update frequency. You can now set the intervall for updates from one second to one hour and the minimum distance moved for updates to occur from none to 1000 meters. Updates are sent to the gear if both criteria are fulfilled. Be aware that network location might not be available everywhere, so if you don't get a location on the gear when using network location that is the most probable reason.
Donwload from
github.com/Mohlsson/GearLocationBridge/blob/master/bin/GearLocationBridge.apk?raw=true
Instructions, thanks to almulder1092, can be found at
http://forum.xda-developers.com/showpost.php?p=48324092&postcount=15&nocache=1&z=9810111129152026
Note that you must allow mock locations on the gear as described in the turtorial for option one in the first steps of setup. Also, this is beta software and I take no responsibility if it messes up your device. All source code is on Github if you are interrested in how it works.
/Martin
mohlsson said:
Hi all!
I have been using my app for a week now and found some bugs that i fixed. I also added settings for network location update frequency. You can now set the intervall for updates from one second to one hour and the minimum distance moved for updates to occur from none to 1000 meters. Updates are sent to the gear if both criteria are fulfilled. Be aware that network location might not be available everywhere, so if you don't get a location on the gear when using network location that is the most probable reason.
Donwload from
github.com/Mohlsson/GearLocationBridge/blob/master/bin/GearLocationBridge.apk?raw=true
Instructions, thanks to almulder1092, can be found at
http://forum.xda-developers.com/showpost.php?p=48324092&postcount=15&nocache=1&z=9810111129152026
Note that you must allow mock locations on the gear as described in the turtorial for option one in the first steps of setup. Also, this is beta software and I take no responsibility if it messes up your device. All source code is on Github if you are interrested in how it works.
/Martin
Click to expand...
Click to collapse
Great job bud, you should get your hands stuck into a tasker plugin !
Thank you fOmey, good idea to make it a Tasker plugin. I took a google crash course on how to make a plugin so there is a new version on github that should work with Tasker. I haven't used Tasker myself so I have only done some simple testing creating a task and triggering it.
mohlsson said:
Hi all!
I have been using my app for a week now and found some bugs that i fixed. I also added settings for network location update frequency. You can now set the intervall for updates from one second to one hour and the minimum distance moved for updates to occur from none to 1000 meters. Updates are sent to the gear if both criteria are fulfilled. Be aware that network location might not be available everywhere, so if you don't get a location on the gear when using network location that is the most probable reason.
Donwload from
github.com/Mohlsson/GearLocationBridge/blob/master/bin/GearLocationBridge.apk?raw=true
Instructions, thanks to almulder1092, can be found at
http://forum.xda-developers.com/showpost.php?p=48324092&postcount=15&nocache=1&z=9810111129152026
Note that you must allow mock locations on the gear as described in the turtorial for option one in the first steps of setup. Also, this is beta software and I take no responsibility if it messes up your device. All source code is on Github if you are interrested in how it works.
/Martin
Click to expand...
Click to collapse
Looks like this needs to be updated for ML1 firmware, could you take a look?
or its just me. Using null_18 full system ui.
Tried reinstalling same thing "GearLocationBridge has stopped"
almulder1092 said:
Looks like this needs to be updated for ML1 firmware, could you take a look?
or its just me. Using null_18 full system ui.
Tried reinstalling same thing "GearLocationBridge has stopped"
Click to expand...
Click to collapse
al i found i think i got it go to developer options on the gear and enable mock locations. zfarishta
red rocket said:
al i found i think i got it go to developer options on the gear and enable mock locations. zfarishta
Click to expand...
Click to collapse
No that was already turned on. I could not figure it out, So i just tried a full reset again. now it works. ODD not sure what is different this time around, but not going to complain.

[APP][5.0+]AndroidAuto carNotifier (Multi-language and Email support)

Beta 1.0 released
I will like to start saying a very big thank you to @bggold who asked me to consider this in the first place
While there isn't any way to use the nice Google Assistant voice, and it's still rough around the edges, this demonstrates how we can use Android Auto in a multi-lingual environment as well as how to read out and reply emails.
The concept is very simple, instead of relaying on Android Auto to read out the notifications I have created a small app which mimics that behaviour, with some extras:
1) It try to do a language detection for each test, and use the appropriate TextToSpeech
2) It allows the user to select which app notification does he/she want's to read
3) If the content is really long (like a lengthy email) the app will prompt the user if it want's to go ahead with the message readout or not
4) If notification supports quick-reply the app will prompt the user for a reply (in the same language as the the original message)
Planning to support a lot of languages but there I will need user input, I have translated the basic strings to around 70 languages using Google translator, but I can tell it's not quite right (I can see with the languages I do speak)
Best part, app won't be affected by 3rd party restriction at all and it won't require root either, however I'm pretty sure Google will not allow it on the PlayStore
Beta version available now on XDA Labs.
App will be payable, however current beta is free so grab a copy while you can
To use the app you will need to enable unknown sources in Android Auto, simply open Android Auto, go to About, tap the "About Android Auto" header 10 times till you become a developer, then from the 3 dotted right menu select developer options and enable "Unknown sources"
Emil Borconi said:
Beta 1.0 released
I will like to start saying a very big thank you to @bggold who asked me to consider this in the first place
While there isn't any way to use the nice Google Assistant voice, and it's still rough around the edges, this demonstrates how we can use Android Auto in a multi-lingual environment as well as how to read out and reply emails.
The concept is very simple, instead of relaying on Android Auto to read out the notifications I have created a small app which mimics that behaviour, with some extras:
1) It try to do a language detection for each test, and use the appropriate TextToSpeech
2) It allows the user to select which app notification does he/she want's to read
3) If the content is really long (like a lengthy email) the app will prompt the user if it want's to go ahead with the message readout or not
4) If notification supports quick-reply the app will prompt the user for a reply (in the same language as the the original message)
Planning to support a lot of languages but there I will need user input, I have translated the basic strings to around 70 languages using Google translator, but I can tell it's not quite right (I can see with the languages I do speak)
Best part, app won't be affected by 3rd party restriction at all and it won't require root either, however I'm pretty sure Google will not allow it on the PlayStore
Beta version available now on XDA Labs.
App will be payable, however current beta is free so grab a copy while you can
To use the app you will need to enable unknown sources in Android Auto, simply open Android Auto, go to About, tap the "About Android Auto" header 10 times till you become a developer, then from the 3 dotted right menu select developer options and enable "Unknown sources"
Click to expand...
Click to collapse
Thanks for making this app!
After first start it asked for notification permission and then it was gone to build the list of installed apps/services - endless...
So I've forced close the app after minutes, went to app info/permissions, and enabled unselected permissions for it.
After that the app works now, as it should!
I'll test the functionality today while using AA in my car.
Regards bitstra
bitstra said:
Thanks for making this app!
After first start it asked for notification permission and then it was gone to build the list of installed apps/services - endless...
So I've forced close the app after minutes, went to app info/permissions, and enabled unselected permissions for it.
After that the app works now, as it should!
I'll test the functionality today while using AA in my car.
Regards bitstra
Click to expand...
Click to collapse
Thanks. It was 3 am )) updating the app now.
This is exactly what I needed. Unfortunately I couldn't get it to work. Using Samsung S9 plus running Oreo. Gave read permission to the app, enabled developer settings on Android Auto, enabled unknown sources, enabled whatsapp and Gmail.
Whatsapp notifications haven't changed and it continues to read the foreign text in English. Gmail notifications don't pop up at all.
Any suggestions?
yavuzyay said:
This is exactly what I needed. Unfortunately I couldn't get it to work. Using Samsung S9 plus running Oreo. Gave read permission to the app, enabled developer settings on Android Auto, enabled unknown sources, enabled whatsapp and Gmail.
Whatsapp notifications haven't changed and it continues to read the foreign text in English. Gmail notifications don't pop up at all.
Any suggestions?
Click to expand...
Click to collapse
Not sure if you saw but there is a new release. It fixes this issue. Just remember to reboot after updating.
Unfortunately I have the same problem as @yavuzyay. I'm using a Samsung Galaxy S6 edge with Android 7.0 and Carnotifier Beta v3.
Thanks to @yavuzyay for bugreport and Turkish language input.
I have identified the problem where the app was crashing in case you where using AA on the phone only, and this has been now fixed.
@CeldeSuS - Are you phone only or are you using AA on the car? If phone only, download the new beta 1.4
Emil Borconi said:
@CeldeSuS - Are you phone only or are you using AA on the car? If phone only, download the new beta 1.4
Click to expand...
Click to collapse
I'm using AA on the car (Alpine X802D-U head unit). I'll try the new beta anyway and report back.
Awesome. Works perfectly.
V4 work fine with SM960F(android 8.0) & RLink1 !
Great job!
Very good stuff!
I use it with the now playing feature - basically phone picks up music on the radio,.detects the song and artist and throws a notification. This app picks that up and shows it as a notification on the car screen! I have disabled read out. So it stays as a simple notification.
Quick question - haven't been able to try it - if I set zero seconds as the duration, will it leave the notification forever?
Tested but not working as expected. Line is an application which doesn't support Android Auto.
Positive: Yes, Car Notifier shows there is a message on Line.
Negative: Can't do anything, it won't read the message, the notification stays in grey color and nothing happens when I click on the message.
Cheers
Tom
tom1807 said:
Tested but not working as expected. Line is an application which doesn't support Android Auto.
Positive: Yes, Car Notifier shows there is a message on Line.
Negative: Can't do anything, it won't read the message, the notification stays in grey color and nothing happens when I click on the message.
Cheers
Tom
Click to expand...
Click to collapse
You can't click the notification to have it read at this time. If you want them read to you enable the read option.
"Read out notifications" is enabled in the settings, my Honda headunit is hacked and I have root access, so I don't think this is related to that.
Cheers
Tom
tom1807 said:
"Read out notifications" is enabled in the settings, my Honda headunit is hacked and I have root access, so I don't think this is related to that.
Cheers
Tom
Click to expand...
Click to collapse
I'm sure you have but have you checked all the permissions?
CarNotifier asks only permissions to Microphone and Phone, both are granted.
Wondering now whether it has something to do with the new Android Auto v3.8.584554 where some on Reddit claim, that notification is broken
Cheers
Tom
Edit: Maybe the the new AA version interferes with CarNotifier, because AA can show now also message preview
More edit: My friend tested on the Samsung S7 (I have a OnePlus 3T). Also on his mobile nothing happens with Line.
Can't read out and nothing happens in AA when click on it
Is there an app for Speed cams like in your obd2aa app, to have only the speed cam notification?
tom1807 said:
CarNotifier asks only permissions to Microphone and Phone, both are granted.
Wondering now whether it has something to do with the new Android Auto v3.8.584554 where some on Reddit claim, that notification is broken
Cheers
Tom
Edit: Maybe the the new AA version interferes with CarNotifier, because AA can show now also message preview
More edit: My friend tested on the Samsung S7 (I have a OnePlus 3T). Also on his mobile nothing happens with Line.
Can't read out and nothing happens in AA when click on it
Click to expand...
Click to collapse
I am running the new aa and it is working. Get Emil a bug report right after it happens.
The only thing you can do at this time is swip away the notifications. Clicking them will not do anything.
Thanks
After more testing, I do believe the culprit is Line. Gmail works as expected, Facebook also (just for test).
However, Line refuses, which is actually the reason to install the program in the first place.
Probably one of the few programs which won't work.
Great program though.
Cheers
Tom
Hi guys.
I'm finally back in the UK and in front of my PC, I've also managed to tied up quiet a few of my loose ends and I have no big project starting this year. I will dedicated the last 2 weeks of this years to the following:
1) Looking into fixing some of the FC for obd2aa, also try to find a solution for non-standard PIDs
2) Get AA GateWay to Beta/Stable version (most work needs to be done on this app)
3) Fix some issues and FC with HUR (including Waze sound cut off).
4) Get the carNotifier to a stable version.
January and February are again fully booked so I will focus on stability rather then adding new features especially because obd2aa and HUR and fairly mature apps with most of the functions already covered.
For some reason I'm not really getting any notifications from XDA and being a lot on the road I don't visit the site too often lately, therefore I will kindly ask you if you need support, please email me directly to [email protected].

Categories

Resources