Database Develop

Wifi tether droid eris

ok so my phone is rooted and i was wondering is there any wifi tether app that works with droid eris? ive tried a number and im pretty sure my phones rooted correctly, its 2.1 with test keys and ive done everything
in the root guide hesides flash a custom rom, (my track ball is messed up and wont scroll down -.-'' so i cant select anything on the recovery page.) but besides that it looks rooted and does everything fine. only issue is any wifi tether app.... any input from any fello eris users? help greatly apprrciated
Sent from my Eris using the XDA mobile application powered by Tapatalk

direct(ish) link to wifi tether page
http://tinyurl.com/yl5tl28

wich one do i pick?
Sent from my Eris using the XDA mobile application powered by Tapatalk

i tried them all none work.. they say root privelages are needed. what am i doing wrong
Sent from my Eris using the XDA mobile application powered by Tapatalk

well first, try the latest version and see if it works for you: http://android-wifi-tether.googlecode.com/files/wireless_tether_2_0-pre10.apk
if not, you can download the one that most people say works: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_70-pre2_htc.apk

ahh neither work. the 2nd one says root privelages are needed... did i root wrong?? or am i just missing somthing so simple.
Sent from my Eris using the XDA mobile application powered by Tapatalk

I was FINALLY able to get wifi tether working with:
Eris_Official 0.8T2 by ivanmmj (upgraded from .7 didn't factory wipe, did dalvik wipe)
wireless_tether_2_0-pre10.apk
Sprint radio 2.42.00.03.10 released on 4-4-10 -- make sure to *228 after flashing

help..?
is the third step mandatory..? (the radio flash)

I wouldn't flash your radio .....its not necessary

Whats up there. I have found that the first link that gohamstergo posted works for my Eris. You may want to check your root. Also if you do root properly you should get the use of your track ball back. I'm using the wireless app right now to send this email. Good luck. I am currently running Kaosfroyo V39 on my Eris. Love it.
FUNK!!

ok i can install all fo the tether apks (obviously not all at once) and they all seem to work fine and my computer recognizes the phones network and the phone shows that its sending data to the computer when talking to it to connect but then says unidentified network no internet access. so they talk to each other but the phone isnt passing on its connection. any idea how i can fix this?

2low2rl said:
ok i can install all fo the tether apks (obviously not all at once) and they all seem to work fine and my computer recognizes the phones network and the phone shows that its sending data to the computer when talking to it to connect but then says unidentified network no internet access. so they talk to each other but the phone isnt passing on its connection. any idea how i can fix this?
Click to expand...
Click to collapse
In Windows under Device Manager does it list in the Network section a RDNIS driver when the phone is plugged in and tethered? Or is the RDNIS driver listed as no driver installed? If no driver is installed, download the latest drivers from HTC at http://developer.htc.com/. It's the very last file at the very bottom.
You'll have to right-click the uninstalled RDNIS device in Device Manager and choose to update driver, then direct it to look for it where you extract the zip from the above link.
This is all assuming that you're talking about wired tethering.
Edit: Sorry, I forgot this is a WIFI tethering thread. Don't know, then. What ROM are you running?

does anyone have any idea why i keep coming up with unidentified network? any help is greatly appreciated.

I SEARCHED FOR HOURS AND NO ONE COULD FIX THIS FOR ME. WHO WOULD HAVE GUESSED SOME LITTLE KID WOULD NAIL IT.
http://www.youtube.com/watch?v=Y_38AoVtj50
NETWORK AND SHARING>WIRELESS NETWORK CONNECTION>PROPERTIES> CLICK INTERNET PROTOCOL VERSIONS> PROPERTIES> CHANGE TO AUTOMATICALLY AQUIRE IP
REPEAT FOR VERSION 6 ALSO

2low2rl said:
I SEARCHED FOR HOURS AND NO ONE COULD FIX THIS FOR ME. WHO WOULD HAVE GUESSED SOME LITTLE KID WOULD NAIL IT.
http://www.youtube.com/watch?v=Y_38AoVtj50
NETWORK AND SHARING>WIRELESS NETWORK CONNECTION>PROPERTIES> CLICK INTERNET PROTOCOL VERSIONS> PROPERTIES> CHANGE TO AUTOMATICALLY AQUIRE IP
REPEAT FOR VERSION 6 ALSO
Click to expand...
Click to collapse
Thanks for letting us know... Glad you got it solved.

Palmbxr said:
ahh neither work. the 2nd one says root privelages are needed... did i root wrong?? or am i just missing somthing so simple.
Sent from my Eris using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Not sure if anyone ever addressed this but if you are still running the stock kernel none of the wifi tethering apps will work. All of them require (to the best of my knowledge) iptables support in the kernel. Before trying to re-root I would try to flash a kernel supporting iptables (such as Conaps CFS kernel).
If you are having trouble with your scroll bar, I remember seeing somewhere in the forums a recovery that supported the hard input keys........

Hi Friends,
Can anyone help me with TUN.ko file for specific DROID ERIS as per the specifications below. I am looking to run CISCO VPN on my droid eris and would require Tun.ko file for the same.
Please help.
When I attempt to insmod tun.ko I get exec format error and dmesg yields
tun: version magic '2.6.29 preempt mod_unload ARMv7 ' should be '2.6.29-bcb140a0 preempt mod_unload ARMv6 '
More Details if any required: Android 2.1 firmware version
Droid ERIS.
Kernal Version: 2.6.29-bcb140a0
[email protected]#1

I have a rooted Droid Eris running CM7, and a Rooted Transformer running Prime 1.4
I had the same problem initially, of not being able to tether correctly because by default, Android does not support connecting to ad-hoc network.
I used adb to push a modified wpa_supplicant file to the transformer, which does allow it to see and connect to my Eris. BTW, I am using "Wireless Tether for Root" 2.07 on my Eris to create the ad-hoc network.
I have noticed one bug: You must disconnect the transformer from the Eris FIRST. Something really weird happens if you disable the tethering first.. it says its disabled but the Transformer will remain connected to it, and tethering gets stuck on and kills the Eris battery even though the Eris itself will report that Tethering is stopped.

Trying to get MSL with CDMA Workshop

I downloaded CDMA Workshop (have used it before) however I cannot seem to find my com port for my phone. When I go to device manager it does not show any Com ports being used. Any thoughts? I am using Fresh 2.1.2

Have you tried my Method for getting your MSL? you don't even need a computer.

You have to get the usb drivers for the phone.
http://rapidshare.com/files/293529424/HTC_Hero_DIAG_Drivers.zip
Unzip the files to a folder on your computer.. mine are on desktop
Then in the dialer type
##diag#
A screen will come up enable daig.. And you should see a com port now.
I got my msl using cdma.

kyouko said:
Have you tried my Method for getting your MSL? you don't even need a computer.
Click to expand...
Click to collapse
Worked Great. Thanks

Yep, it does work. But make sure you have the app aLogcat installed first. It's mentioned later in the thread, but it's not stated in the first post. So, if you're not familiar with it, you'll be scratching your head wondering what it's about (if you need a different ROM). Btw, this worked with a stock Sprint 2.1 ROM. No rooting required.

[Q] Revolution V7 Gingerbreadupdate

OK, got the Revos Feb.2, kept trying to do the OTA update. 4 hours on the phone with CS & Tech. An hour at the Verizon store. No luck whatsoever. Now, I would like to post here http://forum.xda-developers.com/showthread.php?t=1337386 but as I need 10 posts to post in Development, I am here.
We are stuck on 2.2.2 Froyo & would like to do the update to Gingerbread, then root (have that down pretty well).
Being as the Multiupload site is inaccessible, I searched & found the LGNPST 1.2 & installed all 5 parts. Already had Drivers installed in anticipation of rooting.
1.The .DLL file I found elsewhere has a .7z extension ( not 7Zip ).
2.My .tot file for V7 Gingerbread must be corrupt, as I cannot extract it at all. (Downloading through Revo Wifi)
Does anyone have better site to download these files?
I feel I would do fine, so long as I could get these files.
Thank you all for any assistance & for all of the work that you have done to help Newb Revo owners like me...
Ed

yankneck696 said:
OK, got the Revos Feb.2, kept trying to do the OTA update. 4 hours on the phone with CS & Tech. An hour at the Verizon store. No luck whatsoever. Now, I would like to post here http://forum.xda-developers.com/showthread.php?t=1337386 but as I need 10 posts to post in Development, I am here.
We are stuck on 2.2.2 Froyo & would like to do the update to Gingerbread, then root (have that down pretty well).
Being as the Multiupload site is inaccessible, I searched & found the LGNPST 1.2 & installed all 5 parts. Already had Drivers installed in anticipation of rooting.
1.The .DLL file I found elsewhere has a .7z extension ( not 7Zip ).
2.My .tot file for V7 Gingerbread must be corrupt, as I cannot extract it at all. (Downloading through Revo Wifi)
Does anyone have better site to download these files?
I feel I would do fine, so long as I could get these files.
Thank you all for any assistance & for all of the work that you have done to help Newb Revo owners like me...
Ed
Click to expand...
Click to collapse
I reposted all this stuff in the Development forum after Megaupload got shut down.
http://forum.xda-developers.com/showthread.php?t=1466655

I thank you tremendously !!! I think I remember seeing that before, but in my frenzy of 2 days of sheer frustration, I missed the note about not working on Firefox (which I obviously use). Thankyou Sooooo much & I'll let ya know how I do in the morning.
Ed

Not a problem! There's actually a work around that was found for Firefox (thanks to Cybie). Just right click on the link, then click "save as." That should get the download going.
Sent from my Volted Ice Revo using Tapatalk.

I did it the right click way... Funny, I have seen pages come up like that & never knew why.
Now, when you uploaded it, was the file zipped? In the instruction post, it tells you to extract the file & I cannot seem to. When I compare the bytes, all looks fine. I downloaded it 2 times, just for insurance. Boy was it faster through you, than the fileshare site !!!
Again, thank you soooooo much !!!
Ed

You don't extract the tot file you leave it alone you just need to extract the lgnspt program and install everything then you make that folder to put the dll in and register the dll then follow the instructions throughout the process.
Sent from my VS910 4G using xda premium

OK, On a Toshiba junker laptop with Pent 3 2.6 Ghz, 1 gig RAM & Win 7 32 bit I ran everything fine with 1 cavet, I had to use Randymandy's DLL install procedure listed here:
If you're having trouble getting the vs910.dll to install and keep getting the "Windows7 RegSvr32 Error 0x80020009" message then try this:
Start (Win Key) > type uac > ENTER
Pull slider down to Never notify > OK
Restart computer
try installing vs910.dll again
just make sure you go back and put the slider where it was after you are done upgrading the software on your phone. This worked for me and I'm running windows 7 64bit.
16 minutes & 43 seconds, I am GINGERBREADED !!!
I want to put out thanks to the information I got here personally:
Jackpot
Spc_hicks09
Randymandy
Beamer9408
Thanks, folks !!! I can now Root & Gingervolt !!!!!!
Mods, feel free to move this to the origional GB post if you feel it would do better there.
Again, THANKS !!!!!!!!!
Ed

Rooted in 2 minutes with the Root in Development !!! WOO HO !!!!
Ginvervolt, here I come !!!!
All apps ( including free) are still there, along with contacts !!!
Ed

Well, been trying to get a tethering app to work right. After rooting, even the Verizon hotspot would not work. Tried Barnacle, Wifi tether & Open garden. Tried all the different settings & had it working for about 10 minutes.
Soooo I said what the heck, Gingervolted it & BOY is it fast. Still having issues with hotspots, but got Wifi tether v9 to work right now.... We'll see if it still works after a reset... Let's hope.
Does anyone have a stable hotspot app & settings they know of?
Again, thanks to all...
Ed

Well, I guess I'll just keep trying older versions of Wifi tether... v9 would not work after a reset.....
Ed

OK, got it all working after alot of studying... The problem I was having for an internet connection was the MTU settings of my wifi card in Winduhhz 7. Not sure what it's all about, but it is fully stable. Check out this site for checking & adjustment procedure. I ended up with a final setting of 1428 http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/
So, now the quest is to customize the phone the way I want it...
Ed

Great to see I am still helping people lol
Sent from my ADR6425LVW using Tapatalk

[GUIDE] How to Install Ice Cream Sandwich on your Rogers P925 (Or fix baseband issue)

Well, after a TON of work, and unsuccessful attempts at getting this, I finally was able to get signal and working data on my phone. I know some people had had trouble with the process, so I'm going to post my guide here to help you all out.
There are two parts to this tutorial. Only one is needed, however, to get ICS to properly work, so find the one that fits your current predicament AND ONLY USE THAT PART OF THE TUTORIAL.
If this is your first time installing the ICS rom...
Follow the LG flashing tool guide that XBSall has linked in his ICS Rom post. You can also find it at http://forum.xda-developers.com/showthread.php?t=1244490 . However, when you install the ROM, DO NOT USE THE .FLS FILE HE PROVIDES. Instead, download the v18A baseband and install that one with the .BIN file he provides. You can find the v18A baseband here- http://forum.xda-developers.com/showthread.php?t=1338383 I believe. After you flash the entire thing, you should have ICS! Easy!
If you have the ICS Rom installed now, but have no signal...
This is a bit more complicated, but still very easy. After I flashed ICS, I was not able to flash things using LGFlashTool like I could in GB. This is how I ended up flashing the baseband to fix my issues.
We need to set up your phone to connect with LGFlashTool first. To do this, use XBSall's restore to GB method, located at http://forum.xda-developers.com/showthread.php?t=1942836 . You will need the OMAP4BOOT files, but you will need nothing else.
Follow his tutorial up until step 6. When he tells you to insert the battery, insert it AS FAST as you can. I messed up on the timing the first few times. Once I saw a greyscale LG logo, and a few other times it just booted normally. Just try again if this happens. Eventually you will get the screenshot in step 9. DO NOT remove the cable when OMAP4BOOT tells you to, as well.
Follow step 10 and 11 of XBSalls restore tutorial, and then follow step 12. When you set up LGFlashTool for the reflashing, simply select the v18A baseband to flash and then start the process. If done correctly, Port 1 should state READY. Repeat steps 3-9 in his tutorial. It will start the flashing process. Once you get an error, close the program, and remove your phones battery and disconnect it from your computer.
Turn on your phone, and receive signal. PROFIT.
Hope this helps you guys out a bit, and remember to hit thanks if this helped you.

you beat me to it lol I was just about to post steps just like this
Sent from my LG-SU760 using xda premium

still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012

Can anyone help? The guide dosent show you how to install the OMAP4430 drivers, but i found out myself how to do it so whatever. Problem is, now "OMAP4430 USB Device" is dissappearing and reappearing over and over again when i boot with volume up. Can anyone shed some light as to how to fix this?
And my phone isnt bricked, i can turn it on right now and everything.
EDIT: Found the problem, you need to hold VolUp after OMAP4430 pops up. Funny, it says in the guide to let go when it pops up. Fixed my mistake though.

llsektorll said:
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Click to expand...
Click to collapse
I have the same thing on my phone. Maybe try to reflash the v18A baseband again?

u can use V20A or V21B basebands also they work too
Sent from my LG-SU760 using xda app-developers app

llsektorll said:
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Click to expand...
Click to collapse
OH MY GOSH. NOW THAT I HAVE ACCESS TO YOUR SCREENSHOT, I NOTICED YOU HAVE THE THING THAT HAD ME STUMPED FOR HOURS.
Follow the second part of my tutorial to the T. If it still doesn't work, maybe I'll make a video or we can go on Teamviewer and I'll try to help you out.

BG64 said:
OH MY GOSH. NOW THAT I HAVE ACCESS TO YOUR SCREENSHOT, I NOTICED YOU HAVE THE THING THAT HAD ME STUMPED FOR HOURS.
Follow the second part of my tutorial to the T. If it still doesn't work, maybe I'll make a video or we can go on Teamviewer and I'll try to help you out.
Click to expand...
Click to collapse
I tried everything to detail and it doens't work. PM me when you are available to teamview. I will be here till 1am -6GMT (CST)
PM me when you are ready to go I'll be here.

not able to keep OMAP 44xx device connected
Hello everyone,
I'm currently trying to get ICS installer on my rogers P925. I tried many times on two computers (both windows 7 one is 32bits other is 62bits) to flash the bin and fls files you are recommanding but it seems like even if my OMAP 4430 device driver is correctly installed via the program files texas instuments dll it seems it wont stay connected at all and just pop open and closed sometimes when it seems to want, and it makes the flashing procedure impossible to me any ideas?

b.charles.gagne said:
Hello everyone,
I'm currently trying to get ICS installer on my rogers P925. I tried many times on two computers (both windows 7 one is 32bits other is 62bits) to flash the bin and fls files you are recommanding but it seems like even if my OMAP 4430 device driver is correctly installed via the program files texas instuments dll it seems it wont stay connected at all and just pop open and closed sometimes when it seems to want, and it makes the flashing procedure impossible to me any ideas?
Click to expand...
Click to collapse
Although mine hasn't worked in flashing properly I might be ables to get your drivers to connect properly so that LGflasher starts flashing. PM me your teamviewer ID and PW

BG64 said:
Well, after a TON of work, and unsuccessful attempts at getting this, I finally was able to get signal and working data on my phone. I know some people had had trouble with the process, so I'm going to post my guide here to help you all out.
There are two parts to this tutorial. Only one is needed, however, to get ICS to properly work, so find the one that fits your current predicament AND ONLY USE THAT PART OF THE TUTORIAL.
If this is your first time installing the ICS rom...
Follow the LG flashing tool guide that XBSall has linked in his ICS Rom post. You can also find it at http://forum.xda-developers.com/showthread.php?t=1244490 . However, when you install the ROM, DO NOT USE THE .FLS FILE HE PROVIDES. Instead, download the v18A baseband and install that one with the .BIN file he provides. You can find the v18A baseband here- http://forum.xda-developers.com/showthread.php?t=1338383 I believe. After you flash the entire thing, you should have ICS! Easy!
If you have the ICS Rom installed now, but have no signal...
This is a bit more complicated, but still very easy. After I flashed ICS, I was not able to flash things using LGFlashTool like I could in GB. This is how I ended up flashing the baseband to fix my issues.
We need to set up your phone to connect with LGFlashTool first. To do this, use XBSall's restore to GB method, located at http://forum.xda-developers.com/showthread.php?t=1942836 . You will need the OMAP4BOOT files, but you will need nothing else.
Follow his tutorial up until step 6. When he tells you to insert the battery, insert it AS FAST as you can. I messed up on the timing the first few times. Once I saw a greyscale LG logo, and a few other times it just booted normally. Just try again if this happens. Eventually you will get the screenshot in step 9. DO NOT remove the cable when OMAP4BOOT tells you to, as well.
Follow step 10 and 11 of XBSalls restore tutorial, and then follow step 12. When you set up LGFlashTool for the reflashing, simply select the v18A baseband to flash and then start the process. If done correctly, Port 1 should state READY. Repeat steps 3-9 in his tutorial. It will start the flashing process. Once you get an error, close the program, and remove your phones battery and disconnect it from your computer.
Turn on your phone, and receive signal. PROFIT.
Hope this helps you guys out a bit, and remember to hit thanks if this helped you.
Click to expand...
Click to collapse
XBSALL helped me out! It's finally working now! My problem was with the port. He got my phone rooted, changed USB port (I mistakenly was changing the wrong one), installed TWRP, put his ICS cleaned mod version on through TWRP zip install. It's all working now full bars of 3G!

help?
Finally got to flash ICS on phone but it was giving me errors everytime I wasn't using original baseband associated with .bin file. Now, I can't get it to boot in fastboot even using OMAP4boot I don't really understand when I need to insert fast the battery... OMAP4boot doesn't seem to get my phone...

You will always get errors as these are not full kdz files. If you are stuck at lg logo..try pull batt replace then hold vol- and power button til you see a factory reset screen do reset and boot..that made mine boot.
Sent from my LG-P925 using xda premium

Bdadd34 said:
You will always get errors as these are not full kdz files. If you are stuck at lg logo..try pull batt replace then hold vol- and power button til you see a factory reset screen do reset and boot..that made mine boot.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Sorry, maybe I wasn't clear enough, but my phone boots now, it's only I had to flash it with the O3D fls file and not the .fls I was supposed to use so I get a working ICS without any network.
Now that i'm trying to complete step 2 to get te right baseband, i can't get the phone to boot in download mode even using OMAP fasboot flash. the software just don't say anything appart from "waiting for phone".
So I was wondering if I was doing anything wrong

b.charles.gagne said:
Sorry, maybe I wasn't clear enough, but my phone boots now, it's only I had to flash it with the O3D fls file and not the .fls I was supposed to use so I get a working ICS without any network.
Now that i'm trying to complete step 2 to get te right baseband, i can't get the phone to boot in download mode even using OMAP fasboot flash. the software just don't say anything appart from "waiting for phone".
So I was wondering if I was doing anything wrong
Click to expand...
Click to collapse
Try the resurrection guide by xbsall it finally worked for me after I did everything I was supposed to I kept missing simple steps
Sent from my LG-SU760 using xda app-developers app

wayno140 said:
Try the resurrection guide by xbsall it finally worked for me after I did everything I was supposed to I kept missing simple steps
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Finally download mode is quite simple to acess (discovered on my own searching for a recovery)
1- power, vol+ , 3d button pressed
2- on lg logo release power
3- after 2 seconds approx release 3d button
4- wait for the korean page indicating LG SERVICE and a phone
you should be in it!!
now i'm getting a curious RAM writing error while using this mode on lg flash tool

b.charles.gagne said:
Finally download mode is quite simple to acess (discovered on my own searching for a recovery)
1- power, vol+ , 3d button pressed
2- on lg logo release power
3- after 2 seconds approx release 3d button
4- wait for the korean page indicating LG SERVICE and a phone
you should be in it!!
now i'm getting a curious RAM writing error while using this mode on lg flash tool
Click to expand...
Click to collapse
You need to do it this way http://forum.xda-developers.com/showthread.php?p=32945961 and only the way read the whole first 2 pages and do everything xbsall is a genius as are the people that worked with him to come up with the guide
Sent from my LG-SU760 using xda app-developers app

wayno140 said:
You need to do it this way http://forum.xda-developers.com/showthread.php?p=32945961 and only the way read the whole first 2 pages and do everything xbsall is a genius as are the people that worked with him to come up with the guide
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
it's almost the 10th time I follow the guide step by step by step... I think or i'm always doing wrong something or it's something else with my phone... I may have misconfigured one port but i do NEVER NEVER at all in the process see OMAP4430 device in my device manager.. so the little windows tool is not doing anything... maybe if someone wanna teamviewer they can see for themselves what it gives.

Wahoo, ICS + network
finally found that there was the correct driver for my computer in the omap4boot folder and not in everyother one I was installing, flashed with the guide after i found this driver and everything works fine
only thing i'm struggling is to set apns to get 3G any tricks?

Do a Google search for AT&T 4G APN (or whoever our carrier is). You can also create an APN with the word "phone" in the first two blanks, name and APN (I think), and it should give you access to 3G and HSPA. I hit 6.7mbps on Speed Test.
Sent from my LG-SU760 using xda app-developers app

AHD drops wifi on stock and custom ROMs

I have an AHD and I have had this problem for a while. When on stock or custom ROMs, the phone will suddenly drop the wifi connection. Sometimes, it will re-connect right away, other times, it takes a bit. Once it re-connects, it will either stay connected for a few minutes and drop again or it will connect and immediately drop it. It didn't bother me too much but it seems to be getting worse.
I'm running the latest Bell radio (mb886_bp_100740.071.65.61p).
Anyone else have this issue?
Edit: does the same thing with the latest retail Mexico radio too.

audit13 said:
I have an AHD and I have had this problem for a while. When on stock or custom ROMs, the phone will suddenly drop the wifi connection. Sometimes, it will re-connect right away, other times, it takes a bit. Once it re-connects, it will either stay connected for a few minutes and drop again or it will connect and immediately drop it. It didn't bother me too much but it seems to be getting worse.
I'm running the latest Bell radio (mb886_bp_100740.071.65.61p).
Anyone else have this issue?
Edit: does the same thing with the latest retail Mexico radio too.
Click to expand...
Click to collapse
I'm not sure how much diggin you did or what you've read on this issue, but after about a half hour i found a thread that may help you. It seems to have helped others with this same issue:
http://forum.xda-developers.com/showthread.php?t=2469104&page=3
Then.... not sure if this will help your situation, but it's woth a shot. Wifi-fix.zip or something, I've used it before for a similar issue:
http://forum.xda-developers.com/showthread.php?t=2178123

Thanks for the links. The solutions offered don't help. I have WiFi, it just drops randomly at times.
I'll be putting the ahd away and switch to using my backup Samsung phone.

I have used the above fix for intermittent WiFi connectivity problems just like yours.
Sent from my Atrix HD using XDA Premium 4 mobile app

TheJeremyWhite said:
I have used the above fix for intermittent WiFi connectivity problems just like yours.
Sent from my Atrix HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just loaded the att radio from stock 4.1.1 ROM for testing. I'll let you know how it goes.
Thanks again for your help.
Edit: The AT&T modem seems to have really helped. I surfed continuously for 40 minutes and it never dropped the wifi signal

audit13 said:
I just loaded the att radio from stock 4.1.1 ROM for testing. I'll let you know how it goes.
Thanks again for your help.
Edit: The AT&T modem seems to have really helped. I surfed continuously for 40 minutes and it never dropped the wifi signal
Click to expand...
Click to collapse
Hello I am having the exactly same problem can you tell me how you solved this issue ?
Sent from my ATRIX HD using XDA Premium 4 mobile app

Download the stock ATT 4.1.1 ROM and extract the file named NON-HLOS.BIN using 7zip.
1) install the adb/fastboot files to a single directory on my computer;
2) place the NON-HLOS.bin file in the adb/fastboot directory from step 1;
3) open a command prompt window as an administrator;
4) install the Motorola USB drivers and connect my booted phone with USB debugging enabled;
5) from the command line, type "adb reboot bootloader" and press the enter key to get my phone into AP Fastboot Flash mode;
6) from the command line, type "fastboot flash modem NON-HLOS.bin" and press enter; and
7) reboot the phone and check to made sure my baseband now says "QUINARA_BP_100740.081.65.05".
I have to say that it helped but the problem did reappear. I then decided to flash a complete stock ATT 4.1.1 ROM again, I ran the OTA update which updated the modem again, and wifi has been fine since the OTA update.

audit13 said:
I have an AHD and I have had this problem for a while. When on stock or custom ROMs, the phone will suddenly drop the wifi connection. Sometimes, it will re-connect right away, other times, it takes a bit. Once it re-connects, it will either stay connected for a few minutes and drop again or it will connect and immediately drop it. It didn't bother me too much but it seems to be getting worse.
I'm running the latest Bell radio (mb886_bp_100740.071.65.61p).
Anyone else have this issue?
Edit: does the same thing with the latest retail Mexico radio too.
Click to expand...
Click to collapse
Omg. I didn't know u were in this devices section too? Lol

chrisb906 said:
Omg. I didn't know u were in this devices section too? Lol
Click to expand...
Click to collapse
Not anymore. I gave up my ahd after Motorola ceased system upgrades for the phone. I was quite happy with it for a very long time. The roms were also quite good.