My phone was in trouble in the SIM card, so I decided to open it to clean the contacts. I used contact cleaner on the board and when I built the phone again, the SD card reader not working anymore.
Already disassembled and mounted 10 times and card reader does not read my cards.
The SD memory cards are working, have tested the computer and in another cell.
Now I can no longer use the phone as it is with Android installed in NAND + SD Card.
1) Someone could tell me what to do?
2) Will clean the contact damaged the card reader?
3) There is an installation of Android through the USB cable
Excuse my English, I used google translate to translate this text.
Thanks
Related
Help,
After i flashed my KAISER i have a problem. The sd card is not recognised anymore. Is there a solution for this problem?
I hope so, otherwise i have a brick
Storage card problem
I always used a 4 gig card, just tried an 512 mb card, and that one was recognised. Strange isn't it?
First, which method did you use to flash your new ROM?
If you used the USB method to flash your new ROM, did you remove your SD card during the flash process?
If you used the SD card method to flash your new ROM, did you do a hard reset with your SD card inserted?
Second, do you have an SD card reader for your computer? I would probably try to verify that the file system and data are intact on your SD card. If you have an SD card reader, you can also use it to reformat your card.
If none of this is helpful, provide some more information to fill in the gap between your microSD card working properly and not showing up on your phone.
Re
I flashed to TPCV5.1 full today. No sd in my phone.
My cars reader in the computer doesn't recognise the sd card either.
Strange thing is , when i use an other 4 gig sd card, the phone still doesn't recognise it, my card reader on my computer does, so why not on my phone.
I had a 2 gig sd card, and put all the data again on it, and it's working.
Stilli have a problem that my phone won't recognise a 4 gig sd card.
So far my story.
Does seem odd. What file system is your 4GB card formatted with? If it shows up as "RAW" or anything, I would definately format it to FAT32.
Edit: I was referring to your "other" 4GB card. I don't think I have any advice for the original one.
Hi all. I just got a new X1 a few days ago. Pretty happy to have it, however, I'm having chronic problems flashing a rom on it using the micro SD method. I have a PNY Micro SD card, and after hard spl-ling my phone, I put a rom on the micro SD card in the root, renamed it to KOVSIMG.nbh, powered the phone off. Removed the battery and micro SD, reinserted everything, and when I powered it back up, I got the tri-colored screen, then it said no image file. For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer. Can somebody please either tell me how to format the card on my X1 or direct me to the most current and reliable USB method thread please. Thanks.
[A] Micro SD Flashing method won't work
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
chinkyeyed09 said:
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
Click to expand...
Click to collapse
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Thanks.
Happy New Year to you too.
usb method is simple
just turn device off.push the volume bottom in(& keep it in) then push power & keep both in until bootloader screen appears.then connect to usb.run Xperia Software Upgrade...Done!
x1-pc7 said:
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Click to expand...
Click to collapse
You could try to change your USB to PC setting to "Disk Drive" (Start » Settings » Connections). This way your phone will only show your microSD card instead of both internal memory and SD contents.
See if that enables you to format your SD card.
x1-pc7 said:
For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer.
Click to expand...
Click to collapse
Not even without the X1, i.e. when using only your adapter?
Sounds like either the card or the adapter is broken - any chance to cross-check with another card/another PC?
Make sure your adapter can handle the card: (µ)SDHC cannot be read by older (µ)SD adapters....
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
julyjat said:
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
Click to expand...
Click to collapse
Are you trying to flash your phone? If you do, have you copy the new ROM to the SD card? (in root, not in any folder) And rename the ROM to "KOVSimg.nbh"
Then the boot loader mode will detect the ROM and show instructions.
However, if you're not trying to flash your phone, you don't need to enter the boot loader mode. Just do battery pull, and start your phone normally.
not dev related, therefore moved to q&a
hi i installed wp7 then after it i go back to win mo 6.5
but my device can not detect my micro sd card i format it and i change my sd card with new one but my device said no sd card include in tools format sd card said # the storage card has been damaged and unable to be formated #
i do every thing after this problem with my device changing rom install nand android and re install wp7 but non of them can detect memory card i do hard reset , task 29
is it soft wear problem or hard wear problem????
please help me urgent
So you are saying that you previously had WP7..So after changing ROM (windows 6.5 or Android) you need to format your card with Panasonic SD formater so it can read the full capacity of your card....BUT.....! You are saying that you did all this steps and still your device doesn't recognize your sd card and also you changed the card with a new one! HMMMMM......
Most probably a hardware problem (sd card holder and reader in the device)
Imo something went wrong with Installation or so! Dunno!
Some guys here said that WP7 will burn your card or something!
What SD cards did you use?
Anyone else that experienced this problem????
hi
i use 8 gb sandisk micro sd memory when i put memory in my divice in stting sd card & phone storoge show no sd card
when i connect my phone to pc mass storage showe mass storeg but when i click it no data sho and my system tell please inset meomry
when i want format my sd card from my phone th phoe alert the storage card has boon damaged and unable to be formated
is this the hard wear probiem or soft wear problem
please tell me what can i do
if it's hard wear problam can i chang my sd card slot or i should change my phone mother board?????
help me as soon as posibel
May I know anybody face "Blank SD Card or Unsupported Filesystem" problems with LG Optimus Black or not?
I'm using Kingmax 16GB class4, and I already faced 3 times of this problem, I asked for exchange of the sd card everytime when the sd card blank, so this is the 3rd sd card that I exchange for warranty from the shop, but after one week the same problem occurs again.
Everytime when this problems occur, I can't either format the sd card with the phone or computer, even I use card reader plug in to pc but no response form the computer (not pop up any message and the card reader drive letter not show out also), and I even try to format the sd card with camera but it gives me the message 'memory card error'.
I downloaded hp tool, sd formater but no luck to format the sd card also.
Sorry for my bad english, because I'm new in android, and I did google then result with a lot of such problems also, so hope that any expert will come with a solution, before I'm going to buy a new others brand sd card, just wan to clarify that is it the SD card defect problems or because the is the problems form android?
ROM using is NOVA v3.1.
Help!
1) I cannot save correctly any file on my external 128GB SD memory card. PDF files are saved in a corrupted format. If I create with Total Commander a new folder, it gets deleted later on.
2) The tablet is not rooted.
3) I even tried to copy files via Windows to the tablet via USB-cable and I receive the same error.
Is there a way to check the SD card for errors through Android?
Thank you!
Agreed, doesn't matter which SD card I use.
I have the same issue, I've tried both a cheap, ebay purchased SD card and Samsung SD card from a store. I have the SM-T813. Both of the SD cards had exactly the same issue. I've not rooted the tablet yet, though this is a key reason I'd like to try rooting the tablet.
If this were my problem, I'd pop the card, put in in a USB reader, and try it out directly under Windows. It may need to be reformatted or even re-partitioned.
I contacted the manufacturer. I'll get a replacement because it's broken physically.