Related
I had loaded the ginger clone rom and all was well. I then however wanted to swap kernels so i loaded up seitrons cwm 1.5.6 and proceeded to flash through cwm. this has now become the worst day of my life. the phone will not boot past the galaxy s screen. i cannot not get into recovery and both computers now say usb device not recognized when in download trying to flash odin. i am worried that something is corrupted on my phone because not matter how many times i uninstall and reinstall the drivers no luck. i think it is officially bricked and im sol. maybe some great minds can figure it out here.
It's not bricked - issue is trying to get your computer to recognize your phone when in download mode so you can flash it back.
What OS are you running? Also - where did you download the drivers from? Some seem to work better than others.
If you can get to the galaxy screen you might still be able to to get into recovery. pull out the battery and use the 3 button combo. Hold down both volume button then power and let go of the power button after it turns on. then just reinstall the rom
I'm willing to bet you can also get into Download Mode either with button combos, or a JIG. Once in Download, you can use Odin to restore to JF6, and have a working phone to flash around with again.
i can get into download mode no problem. and i think it is quite possible drivers are corrupted on the phone itself. my wifes phone works on the same exact setup. no usb device not recognized error. i have tried the drivers from here and samsung directly with no luck. 3 button combo does not work. sim out sim in battery out and in. but like i said it will just not register with the comp and hers will. so im going to att and seeing about replacing it. but i will see how that goes. ive done this lots of times with no issues ever.
download works
3 button combo does not so no recovery
usb device not recognized error
thanks for the help and keep it coming i will try everything if i haven't already.
Try current usb port
Sent from my SCH-I897 using XDA App
Think I'm in worse shape. Tried flashing just the kernel to get BLN working again (last ROM I put on somehow loaded a non-compatible kernel). Now the phone boots the white ATT screen and just sits there. Can't get it into D/L mode with 3-button and doesn't respond to computer I have been using to flash ROMs for a couple weeks now...
Am I hosed? ANY help would be greatly appreciated...
You could try to use a JIG to force your phone into Download Mode
Okay...well, got into D/L mode finally. Used Odin to get it back to factory. Used the One Click rooter again, except now it boots to recovery 3e, which doesn't let my power button work as the okay button Pulling the battery to reset it, but it will no longer go into D/L mode to use Odin again. It keeps booting to the recovery Utils, which I cant get out of...*sigh*
Thoughts?
at least your able to do something i still cannot get my phone into recovery or to be recognized by the computer. it is not the drivers so i have no idea. i can only think that something got funked up with the kernel flash.
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
magnumrt562 said:
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
Click to expand...
Click to collapse
i actually tried this yes. i had a blackberry cable from the storm (shivers) that was laying around. tried that but no luck with that or my wifes cable as well. but a good tip for others nonetheless
Pirateghost said:
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
Click to expand...
Click to collapse
I just want to quote this to stress the importance.
Thank you, didn't realize that (still sorta new to this)...
I downloaded a zip (I thought from here somewhere) that extracted into the 4 files. Anyone got a link to the JH6 set of files?
I also downloaded DG's "One Click Odin", but it doesn't seem to really do anything when I run it unless I manually load all the files. Also, I don't see a "Master Clean" like the post refer too
are you sure you downloaded the right odin? in the one click version, theres no option to load files at all. only a "start" and "master clear"
make sure the odin one click is open before you connect your phone.
http://forum.xda-developers.com/showthread.php?t=731989
You guys rock! I don't know how, cause I could have sworn I D/L'd it from that link before and I got the generic Odin, but it looks like I have the right one now! Thank you for your patience with us noobs as we start getting into this new world!
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
zippox180 said:
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
Click to expand...
Click to collapse
I was having the same problem. Have you tried powering off, start odin, hold both the volume up/down, then plug in the usb to your phone?
EDIT:
odin crashed while going back to stock then
my phone will get to download mode buuuuut.. my computer doesnt recognize my phone...
i re-downloaded drivers and the phone is recognized however odin failed the 2 times i got it in dl mode(took about an hour to get it each time)... so i have a jig ordered but with odin not working im not feeling optimistic
nothing seems to happen when its plugged into the wall no battery icon. i reinstalled drivers hoping that would help with no luck.. i just got it back in dl mode after like an hour of it not turning on for me but it doesnt do anything once i get it there.
Get odin3 one click and use it in dl mode. It will brg ur phone back to stock
Sent from my SAMSUNG-SGH-I897 using XDA App
definately problem of bad USB..either cable or port....try using different USB cable or different computer....Use full odin by iCezar...its with minimum risk....specially very beneficial in cases like yours....
my pc doesnt see my phone. thats the issue i cant use odin. and the only thing my phone will do is glow black or go to download mode, idk if its charging but its getting hard to get it in dl mode, multiple tries atm no luck
i have already tried reinstalling the drivers. what are they called so i can delete them and install again rather then just redownload maybe that will help?
.
donks232 said:
my pc doesnt see my phone. thats the issue i can use odin
i have already tried reinstalling the drivers. what are they called so i can delete them and install again rather then just redownload maybe that will help?
.
Click to expand...
Click to collapse
did you always had this problem or just when in DL mode? if you always had this problem then ofcourse something wrong with USB port...but if its only for DL mode then u remove and redownload drivers....
viny2cool said:
did you always had this problem or just when in DL mode? if you always had this problem then ofcourse something wrong with USB port...but if its only for DL mode then u remove and redownload drivers....
Click to expand...
Click to collapse
nope this only happened AFTER my crash on odin. my pc has always seen the phone.
try connecting your phone to pc when odin is already running. See whether it detects. Mine worked this way.
bigbyte.me said:
try connecting your phone to pc when odin is already running. See whether it detects. Mine worked this way.
Click to expand...
Click to collapse
i tried that once of twice
need help
ive got this error after tryimg to bring my phone back to 2.1. any one please help me, my email is [email protected]. igot an error with a black background and showing caution sign between a phone and a computer maybe its brick, need help.
thank you so much for your help.
sorry idont know where to put this.
jvmiralles said:
ive got this error after tryimg to bring my phone back to 2.1. any one please help me, my email is [email protected]. igot an error with a black background and showing caution sign between a phone and a computer maybe its brick, need help.
thank you so much for your help.
sorry idont know where to put this.
Click to expand...
Click to collapse
thats not a big deal, just get it in download mode, and flash it with odin.
EDIT: might as well us this post to say what my computer says with usb since i got in in dl mode again...
USB device not recognized
one of the usb devices attached to this computer has
malfunctioned, and windows does not recognize it.
then something about for assistance in solving this issue click here
this has happened to me acouple times, the first was my fault I pull the usb before odin finished. I could get back into Download mode but Odin would not see the phone and computer would not recognize the phone either, device not recognized.
I tried rebooting, re-installing drivers etc. did not work.
but after an hour or so I finally got it to recognize and odin'd back to stock and back to flashing I was.
this is what I did hope it works for you.
1. disconnect all usb devices
2. un-install captivate drivers
3. reboot computer
4. goto device manager and verify that there is no USB device errors, if there is delete them and reboot again verify again in device manager.
5. install captivate drivers
6. reboot computer
7. start ODIN (DG or iCezars, iCezars is safer)
8. plug USB cable into the computer first (the one that came with the phone not an after market one)
9. hold both up and down volume buttons on the phone
10. plug the usb cable into the phone quickly to get into download mode (if I plugged the phone is slowly ODIN did not recognize the phone no COM, once I did it quick and it picked it up)
11. push START as soon as ODIN shows the COM1, COM2, COM3, COM4 etc (this had to be done quickly too, If i waited ODIN would show the COM but still would not start flashing back to stock)
this worked for me more than once I hope it helps you good luck
oh ok thanks, ill give that a try when i get off of work. i hope my battery doesnt die idk if its charging or not
well no luck even getting back to download mode. i bought a jig so i guess im waiting and trying while i wait.
i keep reading its possible to completely brick if odin fails... did i perma brick?
well a bump of sorts, the jig should come in the mail tomorrow. i miss my phone
jig came in the mail, im working on a few failed odin3 attempts but as i freaked out and started typing this post it seems like a great success. the jig works wonderful
donks232 said:
jig came in the mail, im working on a few failed odin3 attempts but as i freaked out and started typing this post it seems like a great success. the jig works wonderful
Click to expand...
Click to collapse
I have not had to do this but I know some others had issues with Odin and had to right click on Odin and run as administrator for it to work. Also the Odin 1 click should work in almost any situation to get you back to stock. The only worry (again never had the problem) is that depending on the build version of the phone you could lose the three button recovery. Look for the Odin that DG posted.
Sent from My KickAss Captivated CM7 OC'd 1.4Ghz/Undervolted
Just bricked mine... had a problem with kies mini while updating to official 2.2, had to enter download mode to return to stock but Odin failed and now this piece of **** won't even turn on nor enter download mode.. ****ing bad luck?
Toddyn said:
Just bricked mine... had a problem with kies mini while updating to official 2.2, had to enter download mode to return to stock but Odin failed and now this piece of **** won't even turn on nor enter download mode.. ****ing bad luck?
Click to expand...
Click to collapse
Did you try a jig?
Hey guys
This is my first post at XDA but I am not new to flashing ROM to my Captivate
I have looked all over the forums but could not find an answer to my questions.
My Captivate was originally on Eclair, later upgraded to Froyo with lag fix and it fixed nothing. It was still really slow and unusable. I saw one of my friends running Gingerbread and man it was blazing fast. So I decided to try some Gingerbread.
First of all, my Captivate if 1008 batch. The three button to download mode is not supposed to work for this batch but it worked and I was able to get it back to stock ROM. I was able to use the stock ROM too so I decided to try upgrade to Gingerbread. This time the 3 button download mode did not work. So I did "adb reboot download" and put it into download mode and all problems started.
1. No USB port is detecting the phone.
2. The battery slipped out of the phone and after I put it back, it gave me the infamous phone--!--computer soft bricked state.
3. In Windows 7, No "3 button fix to put it to download mode with Odin3 open" is working
4. In Linux (Ubuntu 10.10), I tried the one-click-unbrick JAR file and the error is "Device Not Detected".
5. I have tried 2 different Micro USB cables and all possible USB ports, still no response.
6. Once I connect the phone to the computer, I get the phone--!--computer logo but lsusb does not show the device.
7. On Windows 7, Device manager does not show any USB device when I connect the phone.
So basically I think the problem is the device is not showing up on any USB port, so there is no question of ODIN, Hiemdall or One-click-anything. What should I do now?
Thanks
akshayas1986 said:
Hey guys
This is my first post at XDA but I am not new to flashing ROM to my Captivate
I have looked all over the forums but could not find an answer to my questions.
My Captivate was originally on Eclair, later upgraded to Froyo with lag fix and it fixed nothing. It was still really slow and unusable. I saw one of my friends running Gingerbread and man it was blazing fast. So I decided to try some Gingerbread.
First of all, my Captivate if 1008 batch. The three button to download mode is not supposed to work for this batch but it worked and I was able to get it back to stock ROM. I was able to use the stock ROM too so I decided to try upgrade to Gingerbread. This time the 3 button download mode did not work. So I did "adb reboot download" and put it into download mode and all problems started.
1. No USB port is detecting the phone.
2. The battery slipped out of the phone and after I put it back, it gave me the infamous phone--!--computer soft bricked state.
3. In Windows 7, No "3 button fix to put it to download mode with Odin3 open" is working
4. In Linux (Ubuntu 10.10), I tried the one-click-unbrick JAR file and the error is "Device Not Detected".
5. I have tried 2 different Micro USB cables and all possible USB ports, still no response.
6. Once I connect the phone to the computer, I get the phone--!--computer logo but lsusb does not show the device.
7. On Windows 7, Device manager does not show any USB device when I connect the phone.
So basically I think the problem is the device is not showing up on any USB port, so there is no question of ODIN, Hiemdall or One-click-anything. What should I do now?
Thanks
Click to expand...
Click to collapse
Have you tried cleaning the USB port on your phone with some rubbing alcohol and a small piece of cloth on a toothpick? Maybe it's just not making good contact.
Let me give that a quick try.
Two question.
1. Is the device supposed to be detected even in the soft bricked state by the OS?
2. Even in soft bricked state, is the battery charging? Cuz if its not, I need to order an external battery charger.
Thanks
akshayas1986 said:
Let me give that a quick try.
Two question.
1. Is the device supposed to be detected even in the soft bricked state by the OS?
2. Even in soft bricked state, is the battery charging? Cuz if its not, I need to order an external battery charger.
Thanks
Click to expand...
Click to collapse
If you haven't looked through it, check out the "Captivate Connection Issues and Download Mode Help" in my signature.
To answer your questions:
1. Yes. That screen is quasi-download-mode, and the OS should see it.
2. Honestly, I don't know. I think the answer is yes, but someone who understands the hardware better than I do would have to respond.
almost the same crap as me, our captivates are dying >.<
Bricked too
Got my captivate bricked last night and cannot flash any rom. I got the phone-/!\-computer screen and odin and computer does not detect the phone when i plug it in. I have tried every method known to man but am not getting anywhere. Any ideas?
The screen you are seeing IS DL mode...
Here, you need this!
so the link in the above post is dead. Any idea what it was linked to?
sjorge3442 said:
so the link in the above post is dead. Any idea what it was linked to?
Click to expand...
Click to collapse
My guess: Odin one click
http://forum.xda-developers.com/showthread.php?t=1300843
ok so i bricked my phone, then was able to make a jig which allowed me to get the gingerbread bootloaders installed on the captivate. Now, neither my laptop or pc cannot find the phone while it is in download mode. What should I do from here. I am running ginger bread and cannot make download mode work.
sjorge3442 said:
ok so i bricked my phone, then was able to make a jig which allowed me to get the gingerbread bootloaders installed on the captivate. Now, neither my laptop or pc cannot find the phone while it is in download mode. What should I do from here. I am running ginger bread and cannot make download mode work.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I777 using xda premium
ok to start with I am soft bricked cause i got the phone-!-computer on my screen. here is how it got bricked to start with... was updating to android 2.3 gingerbread with kies mini and the first time when finished updating my wifi would not work so i flashed the rom with odin and it was a bad version cause instantly it went to recovery mode. so I went and downloaded odin one click and flashed it back to stock android eclair and went to update to 2.2 froyo with kies mini our power blinked and now im softbricked.
ok here is what ive tried so far... 3 button combo both volumes and power tried all that. ok next i tried one click unbrick it just say failed everytime... tried AIO captivate toolbox and no avail.. went radio shack got 3 resistors 100k made a jig touched pins 4 and 5 and didnt work either.. so my questions are as follows
1. what next????
2. could i have possibly shorted out my usb port on my phone since i accidently slipped and touched a pin i should not have and AIO captivate toolbox says usb debugging isnt on.
3. is there any way to test the micro usb port on the phone to see if its working right?
any and all help would be very much appreciated.
thanks...
You're actually in an ok place. That phone--/!\--computer screen will function like download mode most times. Just try your Odin file again and you should be fine.
odin isnt recognizing it. is there a way i can make it recognize it?
I just went through this and got my phone working so no need to panic. Odin wouldnt see my phone but heimdall does. Search for the kb2 heimdall one click package and see if that helps. Since you flashed back to 2.2 youll need to use kb2. If you are on GB i897 bootloaders youll need the kk4 heimdall one click package
garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Try different ports, if nothing else. Look in the "Captivate Connection Issues" post in my signature for more items.
Also, you will probably want to stop using the AIO Toolbox. That particular piece of software is a little risky, as it flashes a known dangerous bootloader setup.
I found myself in the same boat. 3-button combo won't work, you have to remove battery and usb cable. Replace battery. Plug usb cable into the motherboard directly(rear), hold volume + and volume - then plug the usb cable into your phone. hold volume buttons until your phone boots into download mode. (assuming you have proper drivers installed)
didnt work
tried both heimdels kk2 and kk4 they both say looking for device. and also tried plugging my usb cord into every usb port on my computer still nothing.
Did your drivers unseat? for some odd reason i had to reinstall the drivers to get mine out of soft brick.
drivers
would that be the drivers for the program or the phone? and also on the kk2 and kk4 they download as jar files just like oneclick unbrick did so do i need to unzip them and move the jar file to where the exe folder is then right click and run as administrator or can i just run the jar file i downloaded?
also the the zadig driver program that comes with heindel programs will not see my phone at all when plugged in any usb port but my wife has a captivate also and when i plugged hers in zadig can see it as samsung usb composite device....
garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Pull battery, pull cable. With phone off, replace battery. Then press volume up only, and power. When screen loads, plug your USB in. If you get the system files screen, press the menu key. Then try Oden. This is what I had to do to get it to work.
Gingerbread through mini kies sucks. Your better off getting Gingerbread here:
http://forum.xda-developers.com/showthread.php?t=1300843
didnt work either
tried the just the volume up and power and plugged in usb still stuck in brick mode...
didnt work
the volume up and power then plug usb didnt work still in brick mode. should i try the usb jig with the phone off or on? when i touch pins 4 and 5 with the jig and the phone off the screen will come on but still computer- ! - phone no download mode
got it
finally got into download mode with the jig and alot of wiggling cussing fussing griping and finally praying lol.... thanks to all of you for your help not many strangers will help people anymore so thanks guys for your time i really appreciate it greatly
HELP
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?
cappy flasher said:
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?
Click to expand...
Click to collapse
Unistall your phone's drivers, restart pc and reinstall them.
Drivers
So i dont know what the drivers are I had a friend set this all up for me. also i think if odin id updated that might work. It was current at the time but when a few months pass its time to update!
---------- Post added at 03:53 AM ---------- Previous post was at 03:46 AM ----------
BWolf56 said:
Unistall your phone's drivers, restart pc and reinstall them.
Click to expand...
Click to collapse
so i just updated odin and i still got nothing. so what are the drivers? ill try that.
if you dont even know what drivers are in windows, and have other people set things up for you, you should not be flashing your phone in the first place.
any time you buy a device and hook it up to windows you install??? drivers.
Google: "drivers"... a piece of software that tells an operating system how to use a device.
but it is doubtful reinstalling your drivers will help
what version of odin are you using? what are you trying to flash now? what were you flashing when it messed up?
im sorry but this may end up being an expensive lesson not to do things you dont understand. you may have to send your phone away to be jtagged or unbricked.
I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85
Not to be mean or start something, but if you work for mobile tech videos and you don't know what drivers are or you say you flash phones multiple times a day, then you should have a GREAT idea of what to do to fix this problem. Did you flash an ICS ROM and it bootlooped on the first flash, well that is supposed to happen. And Since you were on 2.3.5 then there is no DL mode combo problem. I don't know what to tell you. use your resources and Google it, or better yet let me Google that for you...
cappy flasher said:
I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85
Click to expand...
Click to collapse
Heimdall flash!
Sent from my SAMSUNG-SGH-I897 using XDA
Hello everybody!
I've tried to find a solution, but without success.
Today I tried to install CWM on a french Galaxy S.
I've rooted the phone with z4root and after I started on download mod with adb.
Then with Odin3 I installed this file "Root-XX_OXA_JVK-v2.7-CWM3RFS.tar".
After that the phone rebooted automatically, unfortunately it's rebooting eachtime on the galaxy s logo.
The problem are that I can't boot on download mod or on CWM.
When the phone is off and I plug it on charger, it doesn't charge!
I think my phone is bricked.
Do you think you can help me or it's dead?
Is there a hard reboot procedure or something like that?
Thanks
I have exactly the same problem!
Are you sure you can't enter recovery? Volume up+home+power.
Sent from my GT-I9001 using xda premium
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Keep Trying
I know this is weird but keep hard resetting it. Try like 20 more times before you give up. Worked for me in the past I know it is weird. I had just flashed a new factory ROM.
I swear i have tried to enter the Recovery 20-30 times!!
It's fine
Hello,
I've bought an USB JIG for my SGS GT i9100 and I've been able to install ICS SLIM using Odin v3 1.7.
Very easy...
I advise this solution..
Thanks for your help.
Italia99 said:
I swear i have tried to enter the Recovery 20-30 times!!
Click to expand...
Click to collapse
did u try vol down + home + power button to go to download mode? if it can do that, the problem is just find some driver to make odin recognize your phone. search for "usb driver for samsung galaxy s" in google
then you can bring back your phone to live by downloading any rom you want and flash it via odin
ps. but if you cannot go to download mode, JIG USB with 301 K ohm will help you look at http://www.youtube.com/watch?v=Rdn5GoRjhn0
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Tical84 said:
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Click to expand...
Click to collapse
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
USB Connection
Italia99 said:
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Click to expand...
Click to collapse
Did you checked usb drivers, if not try to connect another samsung android device to your pc first. if another phone connected properly then problem in your phone only.
i suggest check this thread, if you think you completely lost your device - http://forum.xda-developers.com/showthread.php?t=819551
coepeq said:
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
Click to expand...
Click to collapse
Sorry, I should have been more specific. When I reinstalled the drivers I had actually uninstalled KIES and installed just the drivers.
I do have an update though but still can't get it to boot completely. Late last night I decided to try to get download mode to work one last time before passing out and pressing Vol-, Home and Power actually brought me to the recovery screen for the first time in my phone's life! "F YA!" was the only thing I could think at the time so I first went through and formatted/wiped every option I could find then installed the CM9 that I knew worked and now I get to the alien with the matrix-esque background and it stops there. I plugged it in and left it on that screen all night and that guy was still staring at me this morning. I tried download mode again but my computer still doesn't recognize it.