Galaxy S I9000 Blocked al Boot - Galaxy S I9000 Q&A, Help & Troubleshooting

Sorry for my bad English
Let me explain this very serious problem I have.
I was updating my Odin through the galaxy S Jp6, when power outages and the phone remains for me in download mode.
I remove the battery and the rimentto me an icon:
Phone! PC.
My phone as I understand it has the three key combo does not go off then it will for download in recovery mode (in fact I had to go with the dos and pc sdk).
Now I have the phone in need of repair and does not want to reggae.
The pc does not read the Keis not read it.
What can I do?
Please I'm desperate and I would not hold 3 / 4 months in assisteza, give me hope.

Anarkia80 said:
Now I have the phone in need of repair and does not want to reggae.
Click to expand...
Click to collapse
Mine doesn't do reggae either...
maybe you should pick another genre! and try to post in the right forum section!

Anarkia80 said:
Now I have the phone in need of repair and does not want to reggae.
Click to expand...
Click to collapse
reggae?
my phone is rapping now. it imitates eminem

Anarkia80 said:
Sorry for my bad English
Let me explain this very serious problem I have.
I was updating my Odin through the galaxy S Jp6, when power outages and the phone remains for me in download mode.
I remove the battery and the rimentto me an icon:
Phone! PC.
My phone as I understand it has the three key combo does not go off then it will for download in recovery mode (in fact I had to go with the dos and pc sdk).
Now I have the phone in need of repair and does not want to reggae.
The pc does not read the Keis not read it.
What can I do?
Please I'm desperate and I would not hold 3 / 4 months in assisteza, give me hope.
Click to expand...
Click to collapse
Please repost this in the appropriate forum. Most of us here probably know very little about the Galaxy S...
http://forum.xda-developers.com/forumdisplay.php?f=657

Moved to SGS Q&A

I apologize for the mistake I did not realize you are in the wrong section.
Thanks to the moderator to transfer the right place.
Does anyone have an answer to my problem.

Related

Big problem about I9000 Warrantly

Today i am going to refresh my rom . After finishing, Galaxy S can not open...
Is Galaxy S or the battery problem?
Have any method to slove this problem?
I bought from Optus in Australia
Now Version is JM5 and he old version is Jm5,if i go to the custom services ,will i cease the warrant?
Thanks everyone to help.
as long as you flashed it with a samsung-made firmware and not a custom ROM, i think your warrantly should still be ok!
If you seek help from the guys here, my guess is that you need to explain a bit more in detail what's not working, besides "cannot open".
"New version is JM5 and old version is JM5" ??
dudeldei said:
If you seek help from the guys here, my guess is that you need to explain a bit more in detail what's not working, besides "cannot open".
"New version is JM5 and old version is JM5" ??
Click to expand...
Click to collapse
"cannot open" mean when i press the turn on/turn off button don't have any respond.
"New version is JM5 and old version is JM5" That is mean Before and after flashing version, the reason of flash again is i can not use Galaxy but i can enter the download mode. i think this information may help you to find mine problems..but i am not sure.
mcall_r said:
as long as you flashed it with a samsung-made firmware and not a custom ROM, i think your warrantly should still be ok!
Click to expand...
Click to collapse
But i refresh Galaxy via Odin, is it still ok?
ososos said:
But i refresh Galaxy via Odin, is it still ok?
Click to expand...
Click to collapse
Flash I9000DTJG4 if you got your phone from Optus in Australia.
Find it here.
i cannot switch on the Galaxy S even by any modes.
Simply, i think it is broken down and I dont know what to do. I am not sure if my warrant is still effective or not.
You know, generally flash the rom will cease warrant.I think people l solve my problem there... Because Xda's is professional...
Can someone move this thread :-(
I almost fell of my chair when reading "BIG PROBLEMS WITH I9000".
Big problem with flashing you mean !!
OH.. sorry .......
Admin move to correct section.
Sorry about that
Try charging the battery. and then switch on the phone..
SGS is pretty unbrickable
No problem
I hope you find a solution quick.
1. If the phone is turned off then remove the SD card, the SIM card and the battery.
2. Put the battery in only then enter Download mode. Hold in vol down and Home buttons then press the power button. Works every time.
3. OPTUS is currently using I9000DTJG4 available here
4. Set up ODIN with the correct files. PIT 512 and the code file called ADD_OPS.tar from the download.
5. Select Re-Partition.
6. Connect your phone to your computer via USB cable. Wait for com to come up in ODIN.
7. Flash the Aussie firmware.
Wish you luck my friend.
no no no... i CANNOT OPEN SGS AT ANY MODE..
It seems sgs don't have the battery... i cannot charge the phone ..
ososos, unfortunately it sounds like a full brick to me. I think there have been about 5 occurrences of this (myself being one of them), one guy managed to get his to power on my holding home + volume down + power and inserting the battery whilst these buttons were being held.
However as a general rule if your phone won't even turn on you'll need to send your phone off for repair.
Hmmm try using some friend's battery if he too has SGS... Or try charging only the battery at optus.. GL mate..

Galaxy note stuck at welcome screen

I know this is a wide issue on many devices, but i could not find one for the Galaxy Note.
So here it is (and sorry if the answer is allready out there):
i tried to root and it got stuck on bootscreen (the samsung logo). I have figured out (or atleast i thing) that the OS is missing, or something like that. So i downloaded it from a forum page here on XDA. The thing is i can't figure out how to put it on the phone. I tryed using ODIN. Any clue of an easy way to do this?
Thanks in advance
i have N7000JPKK2
madguylb said:
I know this is a wide issue on many devices, but i could not find one for the Galaxy Note.
So here it is (and sorry if the answer is allready out there):
i tried to root and it got stuck on bootscreen (the samsung logo). I have figured out (or atleast i thing) that the OS is missing, or something like that. So i downloaded it from a forum page here on XDA. The thing is i can't figure out how to put it on the phone. I tryed using ODIN. Any clue of an easy way to do this?
Thanks in advance
i have N7000JPKK2
Click to expand...
Click to collapse
Hi there There the way to go is this. Pull battery count to ten replace battery and go to download mode (hold volume down press power on while hold volume down). Start odin make sure re-partition is uncheck extract the stock firmware you downloaded so you have a TAR file click on PDA in odin and navigate to that TAR file connect phone odin should react and a yellow square will appear with com 4 in it now press start . Thats it good luck
Don't think this post belongs in this section, it has no relations to development.
madguylb said:
I know this is a wide issue on many devices, but i could not find one for the Galaxy Note.
So here it is (and sorry if the answer is allready out there):
i tried to root and it got stuck on bootscreen (the samsung logo). I have figured out (or atleast i thing) that the OS is missing, or something like that. So i downloaded it from a forum page here on XDA. The thing is i can't figure out how to put it on the phone. I tryed using ODIN. Any clue of an easy way to do this?
Thanks in advance
i have N7000JPKK2
Click to expand...
Click to collapse
hAD same problem, solved it go here
http://forum.xda-developers.com/showthread.php?t=1413315
try to power cycle again.
thanks for all of u...but matter is solved
madguylb said:
thanks for all of u...but matter is solved
Click to expand...
Click to collapse
You could have got the same result by posting in the QandA section.

HELP phone briked

Hi there i have a SGS which was running ics on a custom rom working fine
I then wanted to flash the official 2.3.6 os back on it for a friend.
I put the phone into download mode then odin did'nt do anything so i turned it off
now i can't see anything on the phone when i turn on the power key please can i do anything?
Check your drivers on your labtop and retry to put the GS in download mode
Try going in recovery system and do all three wipes...
Sent from my SGH-T959 using Tapatalk 2
I can't do anything i cant go into download mode and i cant go in to recovery mode i cant do ****
Any button i press wont do anything to turn on my SGS
I don't even see any backlight
is this worrying
I guess u hard bricked ur phone then...
Now there is only one way..
G
Get a USB jig and with the help of it u can go in download mode.. U can check the video below
http://www.youtube.com/watch?v=1RoZU5ZPMS4&feature=youtube_gdata_player
Proud owner of SGS GTI-9000.
I've got a better solution and with it your phone will never be bricked in the future.
But you can use it only if you are handyman.
Follow this thread :
http://forum.xda-developers.com/showthread.php?t=1330491
and your phone will resurect and will be immortal ^^( manner of talk, if you drop it from the 51 floor of a building it will not survive).
Dustman317 said:
I've got a better solution and with it your phone will never be bricked in the future.
But you can use it only if you are handyman.
Follow this thread :
http://forum.xda-developers.com/showthread.php?t=1330491
and your phone will resurect and will be immortal ^^( manner of talk, if you drop it from the 51 floor of a building it will not survive).
Click to expand...
Click to collapse
lol i ll never try that...
u seriously doing it?? O.O
wish u luck though..
@drakester20 the utube video that you sent me went back to xda site and said it will only work if the bootloader is workin mine is'nt
and
that method you showed on disecting the phone might be my only option
just out of curiosity could i give it to samsung and will they detect that it has been rooted?
BTW i installed a I9100 flash file on to the odin when i did it which was samsung s2 flash file now i realise what went wrong
Me being a **** head and installing the wrong file.:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
mizzeeboy said:
@drakester20 the utube video that you sent me went back to xda site and said it will only work if the bootloader is workin mine is'nt
and
that method you showed on disecting the phone might be my only option
just out of curiosity could i give it to samsung and will they detect that it has been rooted?
BTW i installed a I9100 flash file on to the odin when i did it which was samsung s2 flash file now i realise what went wrong
Me being a **** head and installing the wrong file.:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
ohhh... srry my bad..
I did the same mistake when i rooted my phone for the first time..
and i did gave it to samsung and they fixed it..
they chnged the motherboard..
they wont see ur binary resets i guess..
u can try that too better then ripping ur phone off...
i have made the same thing, need to do somethings.. its not hard.. just need a few minutes to find this instructions on the other forum... w8
brb
edit:
posted by franciscocpg in brasildroid.com
1-Remove battery, sim card and sd card
2-wait 3~4 minutes
3-put your charger on galaxy (i lost my charger, used the usb cable and worked)
4-Hold power, and at the same time (dont release power), put battery, press vol.down and home button (in this order)
5-keep holding the buttons for 5~10 seconds
your galaxy must be online again..
i'm sorry for my bad english, but i think its understandable ;p
its work for me and more 7,8 ppls who was the cel bricked...
i hope that work for you too.....
post here any results
this
drakester20 said:
lol i ll never try that...
u seriously doing it?? O.O
wish u luck though..
Click to expand...
Click to collapse
It's easy you just have to make a bridge between two connectors (OMX5 and OMX0) and after you flash a software. If this manipulation can make my phone like a survivor i can do it ^^
---------- Post added at 12:04 PM ---------- Previous post was at 11:58 AM ----------
Don't worry about that the GS2 has a counter who is incremented when u flash a non official software it's a trick that the constructor used to help the Samsung's technicians to know if you can use the guarantee or not but the GS1 isn't equipped of this system, then it doesn't matter.
so @drakester20 are u saying that i can give it samsung and they wont know and charge mer nothing?
mizzeeboy said:
so @drakester20 are u saying that i can give it samsung and they wont know and charge mer nothing?
Click to expand...
Click to collapse
yeah dude.. they wont know ur binary resets anyway.. if u had sgs2 then they could have figured it out in download mode coz there it is written in download mode..
u can give it a try though...
@drakester20 so what did u tell samsung when your phone got briked.
Just found found out that my phone still has warranty till the end of next moth.
What should I say to them?
Should i say i used samsung kies to update then a failure message came on my screen ?
What should i say as I am running out of time and my warranty is nearly about to go?
mizzeeboy said:
@drakester20 so what did u tell samsung when your phone got briked.
Just found found out that my phone still has warranty till the end of next moth.
What should I say to them?
Should i say i used samsung kies to update then a failure message came on my screen ?
What should i say as I am running out of time and my warranty is nearly about to go?
Click to expand...
Click to collapse
yeah say that u tried samsung kies update and due to power failure or something ur phone got messed up..
BTW i just gave them my rooted and bricked phone and they did it for free..
If my post helped, don't mind hitting THANKS
marlonmrn said:
i have made the same thing, need to do somethings.. its not hard.. just need a few minutes to find this instructions on the other forum... w8
brb
edit:
posted by franciscocpg in brasildroid.com
1-Remove battery, sim card and sd card
2-wait 3~4 minutes
3-put your charger on galaxy (i lost my charger, used the usb cable and worked)
4-Hold power, and at the same time (dont release power), put battery, press vol.down and home button (in this order)
5-keep holding the buttons for 5~10 seconds
your galaxy must be online again..
i'm sorry for my bad english, but i think its understandable ;p
its work for me and more 7,8 ppls who was the cel bricked...
i hope that work for you too.....
post here any results
this
Click to expand...
Click to collapse
That did not work for me at all
mizzeeboy said:
Hi there i have a SGS which was running ics on a custom rom working fine
I then wanted to flash the official 2.3.6 os back on it for a friend.
I put the phone into download mode then odin did'nt do anything so i turned it off
now i can't see anything on the phone when i turn on the power key please can i do anything?
Click to expand...
Click to collapse
Try this:
1.Must have:Java,Linux,Windows,MacOS
2.Download this : http://heimdall-one-click.googlecode.com/files/OneClick.jar
3. Run the file
Video how work this: http://www.youtube.com/watch?v=tEotRhChSE4&feature=player_embedded
3. Maybe solved this problem
***
one more solution:
http://forum.xda-developers.com/showthread.php?t=964106
and another one
And here more information an another version for you
http://forum.xda-developers.com/showthread.php?t=1330491
I hope some link or file help for you
dysan0201 said:
Try this:
1.Must have:Java,Linux,Windows,MacOS
2.Download this : http://heimdall-one-click.googlecode.com/files/OneClick.jar
3. Run the file
Video how work this: http://www.youtube.com/watch?v=tEotRhChSE4&feature=player_embedded
3. Maybe solved this problem
***
one more solution:
http://forum.xda-developers.com/showthread.php?t=964106
and another one
And here more information an another version for you
http://forum.xda-developers.com/showthread.php?t=1330491
I hope some link or file help for you
Click to expand...
Click to collapse
Thnaks for all that good advice but unfortunately what ever button i press on that phone will not work
And guess what my warranty has gone to even better
Who thinks i should replace my motherboard and it will work again?
mizzeeboy said:
Thnaks for all that good advice but unfortunately what ever button i press on that phone will not work
And guess what my warranty has gone to even better
Who thinks i should replace my motherboard and it will work again?
Click to expand...
Click to collapse
Yeah.. motherboard will do it.. but it is very expensive.. around 8000 RS. (Convert urself )
If my post helped, don't mind hitting THANKS
drakester20 said:
Yeah.. motherboard will do it.. but it is very expensive.. around 8000 RS. (Convert urself )
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
Yeah I might want to sell it but i've seen some motherboard Resurrections using riff box i wonder some one might quote me for that job?

[Q] hard bricked galaxy ace :'(

hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?
Y_2_J said:
hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?
Click to expand...
Click to collapse
WRONG SECTION!
To be lazy it's NOT ALLOWED on XDA forums! FIRST READ RULES and then read the posts completely ten times and finally read it again!!! ...and if you understand them, you'll try any modifications
Are your device a available warranty yet? send it to the technical service
...if not, you can say goodbye to your phone
Viper The Ripper said:
WRONG SECTION!
To be lazy it's NOT ALLOWED on XDA forums! FIRST READ RULES and then read the posts completely ten times and finally read it again!!! ...and if you understand them, you'll try any modifications
Are your device a available warranty yet? send it to the technical service
...if not, you can say goodbye to your phone
Click to expand...
Click to collapse
really no way to fix a hard brick ? n i have used it for 3 yrs
Y_2_J said:
really no way to fix a hard brick ? n i have used it for 3 yrs
Click to expand...
Click to collapse
...I'm sorry
Viper The Ripper said:
...I'm sorry
Click to expand...
Click to collapse
what abut jig ?
Y_2_J said:
hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?
Click to expand...
Click to collapse
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace. Go through the entire thread and you will get to know all the possible solutions. Here is the link,
How to unbrick Samsung Galaxy Ace
I was able to help someone else solve a similar problem today using this guide, so don't worry!
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Do post your result. Hope I Helped
mahithm said:
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace. Go through the entire thread and you will get to know all the possible solutions. Here is the link,
How to unbrick Samsung Galaxy Ace
I was able to help someone else solve a similar problem today using this guide, so don't worry!
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Do post your result. Hope I Helped
Click to expand...
Click to collapse
thanks for the reply but bro i am unable to boot into downloading or recovery mod
any other suggestion ?
Y_2_J said:
thanks for the reply but bro i am unable to boot into downloading or recovery mod
any other suggestion ?
Click to expand...
Click to collapse
Bro, try to follow the guide. Just pressing Vol Down+ Power+ Home button is completely different from preparing your odin, removing battery, connecting phone to computer, inserting the battery and pressing Vol Down+ Power + Home button. This method can, in the best case scenario, force open Download Mode. Give it a try! You have nothing to lose but something to gain. If this doesn't work, guide also provides details on USB Jig which is your last option. Hope I helped
mahithm said:
Bro, try to follow the guide. Just pressing Vol Down+ Power+ Home button is completely different from preparing your odin, removing battery, connecting phone to computer, inserting the battery and pressing Vol Down+ Power + Home button. This method can, in the best case scenario, force open Download Mode. Give it a try! You have nothing to lose but something to gain. If this doesn't work, guide also provides details on USB Jig which is your last option. Hope I helped
Click to expand...
Click to collapse
allright i will try now
Y_2_J said:
allright i will try now
Click to expand...
Click to collapse
Cool! Do post the result
mahithm said:
Cool! Do post the result
Click to expand...
Click to collapse
tried it 2 times now no success u know my phone doesnt even lights up it stays in a switched of kind situation
Y_2_J said:
tried it 2 times now no success u know my phone doesnt even lights up it stays in a switched of kind situation
Click to expand...
Click to collapse
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
mahithm said:
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Click to expand...
Click to collapse
ok bro is there any chances that a jig might do it ?.... and how does a jig works i know its made of resistors but wat does the resistors do to my phone ?
Y_2_J said:
ok bro is there any chances that a jig might do it ?.... and how does a jig works i know its made of resistors but wat does the resistors do to my phone ?
Click to expand...
Click to collapse
I haven't used USB Jig or even made one, so can't help you here. But you can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped
mahithm said:
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Click to expand...
Click to collapse
No bro... i am not able to go to in download mode... i told you... i was using Vol up + power + home key... i was mistakenly thinking it was downloading mode because it was connecting in Odin..... but u told me that is not downloading mode ... that is RamDump mode..... so .. i also cant go to download mode by pressing Vol down + power + home key.... its dead and not responding.. ....
The USB Jig method is just working for softbricked (it can boot, but looping) phones but can't go to recovery or download mode. So, it's not working for hardbricked phone
iqbal_mahmuda said:
The USB Jig method is just working for softbricked (it can boot, but looping) phones but can't go to recovery or download mode. So, it's not working for hardbricked phone
Click to expand...
Click to collapse
Bro, but the above guide says the USB jig for Samsung devices force the device into download mode so you can flash firmware over Odin and restore it to working order. Are you sure about what you said?
mahithm said:
Bro, but the above guide says the USB jig for Samsung devices force the device into download mode so you can flash firmware over Odin and restore it to working order. Are you sure about what you said?
Click to expand...
Click to collapse
i even saw video on youtube about a hard bricked s3 ,galaxy y, s2 and note n7000 but in the s3 the guy got his phone hardbricked while rooting ..... i got it hard bricked due flashing another handsets rom
Y_2_J said:
i even saw video on youtube about a hard bricked s3 ,galaxy y, s2 and note n7000 but in the s3 the guy got his phone hardbricked while rooting ..... i got it hard bricked due flashing another handsets rom
Click to expand...
Click to collapse
if you have this phone fixed somehow, can you let me updated? i have exactly same condition right now!
rinaldo.jonathan said:
if you have this phone fixed somehow, can you let me updated? i have exactly same condition right now!
Click to expand...
Click to collapse
allright it might take some time cause i dont hve money to buy the jig right now my pocket money is empty so it will take me sometime but i will let u know

[Q] How can i 'unbrick' my Motorola Razr I XT890?

While i was watching a video on facebook my phone randomly crashed, i waited for the phone to die as i didn't know about the soft reset i could do, and ever since then the phone has not booted past the red motorola logo, i've looked up a few ways to 'unbrick' my phone but they all required me to be able to go onto the device and enable USB debugging mode, which i obviously can't do. I have tried 1 other way which was to try and run "xFSTK-SoC-Driver-Setup-1.0.3.exe" and see if the bootloader would be reinstalled but i keep getting a message saying "libusb0.DLL is missing" and when i download the .DLL online it still says the message no matter where i put it.
I can get into the fastboot menu and i have formatted it to see if there was something on the phone that was stopping it from booting, but alas i am still here with a 'bricked' phone. Hopefully someone can help me get this sorted as i'd rather not have to be on my Nokia C1-01 for long
Thanks in advance
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola RAZR i
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
RAZR i Q&A, Help & Troubleshooting
Good luck!
Transmitted via Bacon
MrWafWaf said:
While i was watching a video on facebook my phone randomly crashed, i waited for the phone to die as i didn't know about the soft reset i could do, and ever since then the phone has not booted past the red motorola logo, i've looked up a few ways to 'unbrick' my phone but they all required me to be able to go onto the device and enable USB debugging mode, which i obviously can't do. I have tried 1 other way which was to try and run "xFSTK-SoC-Driver-Setup-1.0.3.exe" and see if the bootloader would be reinstalled but i keep getting a message saying "libusb0.DLL is missing" and when i download the .DLL online it still says the message no matter where i put it.
I can get into the fastboot menu and i have formatted it to see if there was something on the phone that was stopping it from booting, but alas i am still here with a 'bricked' phone. Hopefully someone can help me get this sorted as i'd rather not have to be on my Nokia C1-01 for long
Thanks in advance
Click to expand...
Click to collapse
Try to use RSDlite to install right version of your ROM.
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola RAZR i
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
RAZR i Q&A, Help & Troubleshooting
Good luck!
Transmitted via Bacon
Click to expand...
Click to collapse
Thank you for that i am new to this forum so wasn't exactly sure where to post.
Lucki_X said:
Try to use RSDlite to install right version of your ROM.
Click to expand...
Click to collapse
I have RSDLite installed on my computer, but every single video about how to use it is in Spanish, and i don't speak Spanish so i have no idea, i'm also new to this so i have no idea where to get the ROM from or what to do with it whence i have it.
MrWafWaf said:
I have RSDLite installed on my computer, but every single video about how to use it is in Spanish, and i don't speak Spanish so i have no idea, i'm also new to this so i have no idea where to get the ROM from or what to do with it whence i have it.
Click to expand...
Click to collapse
Search here for answers you need http://forum.xda-developers.com/razr-i/general/index-razr-t2832722
Some of the ROM you can download here http://forum.xda-developers.com/showthread.php?t=2239706
I don't know where you can find others. I'm sorry.
Lucki_X said:
Try to use RSDlite to install right version of your ROM.
Click to expand...
Click to collapse
Lucki_X said:
Search here for answers you need http://forum.xda-developers.com/razr-i/general/index-razr-t2832722
Some of the ROM you can download here http://forum.xda-developers.com/showthread.php?t=2239706
I don't know where you can find others. I'm sorry.
Click to expand...
Click to collapse
Thanks for the information but to me that is just words and links, i have no idea what to download, what i need to be looking into, how to use RSDLite, i'm more a visual learner so i learn via watching (im actually a 90% visual learner) and the fact i have no background with this it is relatively confusing
MrWafWaf said:
Thank you for that i am new to this forum so wasn't exactly sure where to post.
Click to expand...
Click to collapse
No problems at all, that's exactly what XDA Assist is here for
Good luck!
Hi MrWafWaf,
Here some extra help.
The things we are going to do is using RSD-Lite to restore your phone if it only has software problems. And we suspect it has that.
What u need for it are the following:
- RSD-Lite from here, unzip and install
- USB drivers: 32Bits or 64bits windows, and install it
- The firmware, this is the difficult part. U need the one from your country. If u got it wrong, it will maybe not be fully optimized for your country and language. Allways take the latest, in this case one with '9.8.2I' in it. (need help, say from where you from, carrier and if u buyed it from a carrier or retail. Maybe we can say which one u need)
So u now have RSD-Lite installed, the drivers installed and a zip file with the latest firmware.
Now see this thread: here
It's about using RSD-Lite. U already did step 1 and 2 from the 6 steps (not numbered, in quote) short guide.
Fastboot mode: Getting into it;
To get in AP Fastboot mode from power off: Hold Powerbutton + volume down. By holding those 2 the phone will boot and after a few seconds reboot. At the time the phone reboots and vibrates release the powerbutton. Now u will be in fastboot mode with all those text lines.
To get in AP Fastboot when the phone is on the (un)lock bootlogo: Hold powerbutton + volume down + volume up. Keep holding it. At the moment the phone reboots, release the powerbutton and volume up. KEEP holding the volume down button. It will now boot in fastboot mode.
Good luck. For the fastboot mode, u may need to try it a few times before it works. But i can assure you it always will work unless u have a hardware problem.

Categories

Resources