When i updated to the new official froyo via kiesin i got the missing recovery mode i didnt have before this update. Now when i tested if i could get the phone in Download mode i don't have that, haven't had that before either so my question is how can i fix that? Because sooner or later im going to flash another roms.
Sent from my GT-I9000 using XDA App
I answer my self, i actually got my phone to download mode now! Very strange because i tried many times and made the same process every time and finally it gone to download mode. The same thing with recovery mode, don't get that either every time or it can be that i release the power button too early/late. But case closed both mode works so that's fine. Mod can delete this thread!!
Sent from my GT-I9000 using XDA App
Plug the phone on USB cable and try to get recovery or downloading mode again...
Related
when i plugged my phone into kies it offered me an update from 2.2 to 2.2.1 (PDA:JS5 / PHONE:JPY / CSC: JS4). i have rooted my phone before the update using Z4root and also installed voodoo lagfix using a one click installer which was on the market. after the update the phone went into recovery mode and on kies it said something like "disconnect and reconnect usb". i didnt do this and just clicked the reboot now option on recovery mode. and now my phone boots up but the OS does not start. the tmobile boot animation is no longer played, instead it is the (i am guessing) original galaxy s boot animation. after this animation the phone vibrates once, pauses and the vibrates 3 times. if i leave it on then it will do this continously. it used to do this while the phone worked on 2.2 and it ended up force closing whatever app i was using at that time. is it force closing the OS? i can no longer get into 3 button recovery mode even though i could before. i am going to try the ADK which i am new too and if it works and i get into recovery mode what should i do? factory reset? and if doesnt how can i get it to recovery mode?
i really want to get it working again thank you in advance to everyone.
UPDATE: i have tried the adk reboot recovery but it says device not found :S
kremo123 said:
when i plugged my phone into kies it offered me an update from 2.2 to 2.2.1 (PDA:JS5 / PHONE:JPY / CSC: JS4). i have rooted my phone before the update using Z4root and also installed voodoo lagfix using a one click installer which was on the market. after the update the phone went into recovery mode and on kies it said something like "disconnect and reconnect usb". i didnt do this and just clicked the reboot now option on recovery mode. and now my phone boots up but the OS does not start. the tmobile boot animation is no longer played, instead it is the (i am guessing) original galaxy s boot animation. after this animation the phone vibrates once, pauses and the vibrates 3 times. if i leave it on then it will do this continously. it used to do this while the phone worked on 2.2 and it ended up force closing whatever app i was using at that time. is it force closing the OS? i can no longer get into 3 button recovery mode even though i could before. i am going to try the ADK which i am new too and if it works and i get into recovery mode what should i do? factory reset? and if doesnt how can i get it to recovery mode?
i really want to get it working again thank you in advance to everyone.
UPDATE: i have tried the adk reboot recovery but it says device not found :S
Click to expand...
Click to collapse
Your woes are probably because you didn't disable lagfix.
But don't worry - JS5 does not disable the 3-button modes or anything. Maybe you are just releasing the buttons at a wrong time (too early / too late)? See if you can get to download mode (Vol Dn - Power - Home). If yes, you can flash JS5 (or any other stock firmware) via Odin.
Try download mode never make customication without haveing them working!
If 3btn doesn't work built a jig then flash a FULL rom(3files +pit) using odin +repartition
Or if you want it super easy just flash darky resurrection (one file+ good rom)
Could try useind adb to grlet download mode theres guid on hear how to get three button combo useing adb
Sent from my GT-I9000 using XDA Premium App
colindodds said:
Could try useind adb to grlet download mode theres guid on hear how to get three button combo useing adb
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Adb reboot download but i think it will not work if he can't connect adb....
Try hold volup+home+power and do a factory reset.
thanks everyone for helping me out however the 3tbn recovery/download mode is not working and to top it all of my internet provider cut my internet so i cant even research into this matter. this morning i turned the phone on and left for work i'll see what happened when i get home. all i really need to do is get my p.c to recognize the device so i could use adb/odin and that doesnt seem to work. i might end up having to buy/make a jig
you wouldnt beleive the luck i had. i sent my phone of for repairs to samsung while i waited for the parts to build a jig in hope that they wldnt b able to do anything and give me a new one and instead they fixed it. for free. im so happy
I'm trying to get my Korean SGS phone into download mode to flash a 2.3.6 firmware, but the phone won't stay in download mode. It goes straight to recovery after it shows the download mode picture. Any info? Or fixes?
Sent from my GT-I9100 using XDA App
Anyone?
Sent from my GT-I9100 using XDA App
hmm.. So it shows the yellow download pic and right after that goes into recovery? You tried to pull out battery and restart to download mode right after that? you got usb cable connected while doing that?
For me it worked always but again i got GT-I9000 but i would not imagine its that different with these two phones? Never heard of this kind of problem.. one more thing i can think of is trying to use the custom made usb dingle what are sold for example in ebay or you make one yourself that goes into download mode without button combination.
Try to update to latest firmware with kies too if that would solve the problem.. for me i had to do that the first time i started to play around with my phone because before that update i could not even go to download mode.
Thats all i can think about after drinking 10 cans of beer so hopefully even 1 of those helps your case. Hope you get it to work
-_-
Any other solutions besides buying a usb jig? I know there's a way to get it into download mode WITHOUT the phone even showing the android shoveling image. And the screen is just plain black. I forgot how to do it though, and what website I read the article.
you can build a usb jig http://forum.xda-developers.com/showthread.php?t=819551&highlight=usb+jig
you can also read guides here http://forum.xda-developers.com/showthread.php?t=723596
Daaaavinnn said:
I'm trying to get my Korean SGS phone into download mode to flash a 2.3.6 firmware, but the phone won't stay in download mode. It goes straight to recovery after it shows the download mode picture. Any info? Or fixes?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I had the same problem. It was solve when I realise that the Korean version (M110S) enter DL mode by pressing only home key+power, while the I9000 need the 3 bottons combination.
helped a friend out about 4 months ago by flashing kg3 onto his galaxy s after it would crash repeatedly saying 'internal process (android system) error, must forceclose' and after that it worked fine,
but yesterday he said it won't boot up, won't go into download or recovery, the only screen interaction he can get is when it's plugged in it will say battery 100% charged,
when i plugged it into keys the computer beeped then said 'keys 2.0 doesn't recognize this phone' .... help please?!
Have you tried removing and re-inserting the battery? At times after doing that you are atleast able to get into the download mode.
you wil have to re install firmware
Ya I have tried that, still no download mode, and I obviously know I have to reinstall firmware but how could I do that with no download mode
Sent from my GT-I9000 using XDA App
Build a usb jig
Sent from my GT-I9000 using xda premium
usb jig could help you http://forum.xda-developers.com/showthread.php?t=819551
If you dont have luck with usb jig, try THIS
carmanj16 said:
Ya I have tried that, still no download mode, and I obviously know I have to reinstall firmware but how could I do that with no download mode
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
just double check. if you used to be able to get download mode then you shoud be able to get in it again. sgs are fairly hard to break. try removing the battery at full charge and leave all cables out when you do remove it . do the button combo and you should be good. after that happy flashing
I did the Odin one click to bring my phone back to full stock after having issues. i then downloaded ROM manager from the market, since i am running 2.1 eclair i just flashed it via the app. now to upgrade to a new rom, i need to enter download mode. I thought you could always hold in the power buttons and plug in the usb cable, but that isnt working. this CWM version doesnt have a rebbot recovery option in advanced either. really need download mode, any experts got a tip or two..
You may want to check out the "Captivate Connection Issues" thread. That should get you to download or recovery mode.
Also, it's probably best to let go of Rom Manager - it's not very useful on the Captivate.
now i am at
phone--/!\--PC
and my computer isnt recognizing the phone, as well as Odin is not either...
I'd say to keep trying, and try Heimdall if you haven't already. The phone--/!\--pc screen should work as a download mode.
jmtheiss said:
I'd say to keep trying, and try Heimdall if you haven't already. The phone--/!\--pc screen should work as a download mode.
Click to expand...
Click to collapse
Yeah it didn't work for me as download mode. I just went to radio shack bought some resisiters and made a little USB jig that got me into the regular download mode though.
Sent from my SGH-I897 using xda premium
Oh and bow running 4.0.4 on cyanogenmod9! Its sick
Sent from my SGH-I897 using xda premium
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
vinte007 said:
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
Click to expand...
Click to collapse
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
BWolf56 said:
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
Click to expand...
Click to collapse
Thank you for your reply. Yes I did try that also. But it just does a normal restart. I tried the the ADB "reboot recovery" also. It also didn't help. I even downloaded an app to reboot into recovery, but no help.
And yesterday I got a jig from my friend, it worked on his infuse but did not work on my Captivate. He said that it might be because he is using a 330K resistor. So I ordered a jig from ebay. It will take some time to reach here.
Is there anything else I can try? maybe push a recovery or something using ADB? Sorry if I am being noob here
Once again, thanks for your support.
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok, I will wait for the jig and when I get it, I will post the result.
Once again Thank you for your help
Aaaand all of a sudden I was wondering, can this be a bootloader problem? Maybe my bootloader got locked somehow or something?
The best thing is still to wait for the Jig or make one, as BWolf56 suggested.
Once ya have the Jig and If u can get into Download Mode with it, I suggest that u flash the One Click Odin or Heimdall Stock Android 2.3.5 i897uckk4 that includes the Bootloaders. (See the stickied One Click thread in the Dev forum, Post #3). If that is successful, do not flash any Bootloaders again. U can then proceed to flash the KK4 Corn Kernel, the .tar version of the kernel v7.0A, through Odin and then use that CWM Recovery that is baked into that kernel to go on flashin other Roms, etc.
If u cannot get into Download Mode with the Jig, then ur micro usb port of ur phone may be the fault. (But still an app should work from the play store to reboot to download or recovery)...anyway that is all i got for now.
Keep us posted.
Sent from my SAMSUNG-SGH-I747 using Tapatalk