Theres a similar post, but for the vibrant... + theres no solution in that post
I followed the instructions from here: http://forum.xda-developers.com/showpost.php?p=7152078&postcount=2
Using JPM.tar and 512.pit
Odin said Pass.
But on reboot it says:
Updat media, please wait
E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media: Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed.
On boot, it gets past the glowing S, but then gets to a black screen and vibrates every so often.
Help anyone?
You should have used 803.pit for this particular update, try flashing again using 803.pit, if that does not help then flash to JM8 or JM9 using 512.pit then reflash to JPM using 803.pit with no re-partition and only JPM as PDA.
Thanks trying as we speak.
Just flashed JPM with 803.pit ... same error
trying ur other suggestions.
just flashed JP8 with 512.pit
Cannt boot
E:Cant mount /dev/block/stl11
(Invalid argument)
...
...
Applying muti-CSC
Installing Muti CSC
mps_dat value: XEU
copy multi careier from: XEU
multicsc: can not access to /system/csc/XEU/system
copy common data E:Cant mount /dev/block/stl11
(Invalid argument)
any ideas?
Ok so i managed to get JP1 working using: http://briefmobile.com/how-to-android-2-2-on-galaxy-s
Anyone know the Odin settings required to move from JP1 to JPM ?
mobydeek said:
just flashed JP8 with 512.pit
Cannt boot
E:Cant mount /dev/block/stl11
(Invalid argument)
...
...
Applying muti-CSC
Installing Muti CSC
mps_dat value: XEU
copy multi careier from: XEU
multicsc: can not access to /system/csc/XEU/system
copy common data E:Cant mount /dev/block/stl11
(Invalid argument)
any ideas?
Click to expand...
Click to collapse
This is a normal error for Eclair if you flash a non multi-csc firmware because the requested folder is not there, what you need to be careful about next is to backup the efs folder before doing any other flash. You need a copy of that folder, you can read many threads about missing IMEI number or changed local and sales codes, and these errors cannot be corrected unless you have a copy of the efs folder. When you have a copy of that folder then you may flash as much you like to JPM using 803.pit with no re-partition and the tar file as PDA.
Ive just flashed JP1... how do i know if the contents of the EFS Folder are still the original files? uhoh
Related
This SGS had the original O2 ADJM1 firmware without the 3 button combo, which I fixed using the 3 button fix from another thread. SGS was working fine but I thought I'd give in and try a custom Rom.
Installed Darky's 6.0, worked great, but when I tried a factory reset from the settings menu, it kind of semi bricked, so I used Odin to install "GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM" with pit 512 to recover the SGS.
Problem is, Android Market will not download "download unsuccessful" pops up all the time.
The I installed GT-I9000_I9000XWJM9, hoping to fix the problem, while keeping recovery 2e, but Android market still does not download.
When I try the "wipe data/factory" reset using the 3 button combo, I get the following errors:
Appling Multi-csc
installing Muli-csc
mps_dat value: KOR
copy_multi_carrier from : KOR
multicsc : can not access to /system/csc/KOR/system/
copy common_data E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
wiping data...
Formatting DATA:...
format_root_device: /dev/block/mmcblk0p2Formatting CACHE:...
format_root_device: /dev/block/stl11Data wipe complete.
E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
I'm guessing "E" is the internal SD card, so maybe there's a problem there
Also how do I fix this android market problem ?
I really need a pointer to installing a stock fully working Rom with recovery 2e, then I can move back to Darky's new 7.0 ROM.
Any help would be great.
forcedv said:
This SGS had the original O2 ADJM1 firmware without the 3 button combo, which I fixed using the 3 button fix from another thread. SGS was working fine but I thought I'd give in and try a custom Rom.
Installed Darky's 6.0, worked great, but when I tried a factory reset from the settings menu, it kind of semi bricked, so I used Odin to install "GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM" with pit 512 to recover the SGS.
Problem is, Android Market will not download "download unsuccessful" pops up all the time.
The I installed GT-I9000_I9000XWJM9, hoping to fix the problem, while keeping recovery 2e, but Android market still does not download.
When I try the "wipe data/factory" reset using the 3 button combo, I get the following errors:
Appling Multi-csc
installing Muli-csc
mps_dat value: KOR
copy_multi_carrier from : KOR
multicsc : can not access to /system/csc/KOR/system/
copy common_data E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
wiping data...
Formatting DATA:...
format_root_device: /dev/block/mmcblk0p2Formatting CACHE:...
format_root_device: /dev/block/stl11Data wipe complete.
E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
I'm guessing "E" is the internal SD card, so maybe there's a problem there
Also how do I fix this android market problem ?
I really need a pointer to installing a stock fully working Rom with recovery 2e, then I can move back to Darky's new 7.0 ROM.
Any help would be great.
Click to expand...
Click to collapse
Hi, i have exactly the same problem.
With the invalid argument problems on data/factory reset, and the download unsucessfull problem! i have reflashed 4times JM1 on my phone !!!
i give 25$ for someone who solve the problem !
The way I fixed this problem was in two steps.
I used the Kies registry hack (someone here has created a program (which I can't find a link to right now) for windows that fools Kies to recognize your SGS as requiring an official firmware update).
Once your SGS is back on your official carrier firmware, Android market will work again.
From there, I was able to do a proper factory reset, followed by installing Draky's 7 Rom, using the 3 button combo and update zip method......and till now it's all good.
My SGS went from being a useless paper weight, to a kick ass device.
Good luck.
*You mentioned JM1* you may not need to go back to that firmware, but whatever official carrier firmware that Kies updates your SGS to, should fix the market problem.
With the Internal SD Corrupted Fix, i have formated my internal SD and there is no invalid argument when i do a data/factory reset.
but i think this is another problem, i have tried anything.
The hang on installing/unistalling problem come when i add my Google Account on the Android Market.
After this, i can't install or unistall anything.. that show installing.... at the infinite.
(sry for my english)
i have created a new google account for re-downloading again applications on the market, but i'm really sad because i have bought a lot of with my other account! wtf...
can't someone have any ideas or can help me?
thanks!
Hi All,
I have the same problem described in the old thread @ http://forum.xda-developers.com/showthread.php?t=807784
The thing is, The problem just "appeared", havn't flashed lately, out of the blue, the devices hung and from then on, have not been able to access. I was running DARKY 9.5 with his new kernel.
error started of being:
Code:
update media. please wait
E: can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage not prepared ye. Pleas use UI menu for format and reboot actions.
copy deault media content failed.
after flashing JPM8:
Code:
can't mount /dev/block/mmcblk0p1
(no such file or directory)
E: copy default media: can't mount SDCARD:
copy default media failed.
E: Can't mount /dev/block/stl11
(Invalid argument)
flashing JPM bring me back to square one. can't repartition (or push or anything using ADB). Tried everything google has to offer, but no luck...
my SGS has been acting very bricklike for 4 days...
Need help (and lots of it)
Thanks
What hardware?
Sent from my GT-I9000M using XDA Premium App
This should help you http://forum.xda-developers.com/showthread.php?t=845708
@jim SGS I9000 8GB international
@zhuk7 I'm not able get that far, somehow lost my root, can't push parted, can't locate fdisk
bump......
Try flashing something else. An eclair rom would be a good place to start. Pit files with no repartition.
and I was under the impression JM8 is eclair...
I had similar problem and the solution was to flash a 3 file rom in odin(csc, pda, modem) with repartition.
which (exact) ROM?
so far i'm failing miserably with all roms, including some quite old ecairs - JFF & JFD
now tried almost all the 2.1-2.2 EU stock ROMS and no luck...
should I send to manufacturer?
SO FAR:
a)flash JM8 with 512 repartition,
b)flash JPM with no repartition
c)flash speedmod 500
now have an active android GUI, claiming the internal sdcard is "damaged"
from here, I have tried numerous fixes, with no luck yet...
Just to summarize:
I send to samsung (and is was a hassle... overseas) and they fixed it under warrenty...
I was converting my galaxy tab p1000 files format (rom android 2.3.3 stock version) to ext4, but while processing in cwm screen switched off and i restarted phone then (maybe unneccesary). But now no rom is working because internal memory, flash memory cannot mount anything, its like stuck between default version of files and ext4 and i dont know how to fix it. CWM and download mode is working.
I installed stock android 2.3.3 rom, but when it run cwm to finish installation after flashing by odin, i have error like this:
updating filesystem...
E: failed to mount / dbdata (invalid argument)
E: discard_filesystem_for_rfs: cant mount/ dbdata
wiping cache...
formating /cache...
cache wipe failed...
updating application...
E: failed to mount /data (Invalid argument)
E: install_application_for_customer: cant mount / data
your storage not prepared yet. please use ui menu for format and reboot actios.
copy application failed.
Installing multi -csc applied the csc- code 'itv'
succesfully aplied multi csc.
----
It cannot read flash and internal memory properly. how to restore default version of files - not ext4?
Advocate48 said:
I was converting my galaxy tab p1000 files format (rom android 2.3.3 stock version) to ext4, but while processing in cwm screen switched off and i restarted phone then (maybe unneccesary). But now no rom is working because internal memory, flash memory cannot mount anything, its like stuck between default version of files and ext4 and i dont know how to fix it. CWM and download mode is working.
I installed stock android 2.3.3 rom, but when it run cwm to finish installation after flashing by odin, i have error like this:
updating filesystem...
E: failed to mount / dbdata (invalid argument)
E: discard_filesystem_for_rfs: cant mount/ dbdata
wiping cache...
formating /cache...
cache wipe failed...
updating application...
E: failed to mount /data (Invalid argument)
E: install_application_for_customer: cant mount / data
your storage not prepared yet. please use ui menu for format and reboot actios.
copy application failed.
Installing multi -csc applied the csc- code 'itv'
succesfully aplied multi csc.
----
It cannot read flash and internal memory properly. how to restore default version of files - not ext4?
Click to expand...
Click to collapse
Hi,
Take a look at the Overcome-site and follow the Guide to restock GB. Then you can go on installing an ext4-kernel.
I did it this way : restock v5 - Overcome Kernel 4.0.0 (after reboot wait for conversion)- Hyperdroid 1.5... It might happen that after installing the Hyperdroid you get into a bootloop.. Simply reboot into CWM and flash the Hyperdroid Redpill Kernel one more time...
Hello mate u ok ?
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/201...jw4-value.html
Now i am trying to flash my phone through odin but when its finshed it* my phone shows some erorrs in red* coloures
E:copy_dbdata_media:Can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
Meida files copy failed
-- Deleting files...
E: failed to mount /dbdata (File exists)
E: delete_data_files: Can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
--Updating filesystem...
E: failed to mount /dbdata (File exists)
E: discard_filesystem_for_rfs:Can't mount /dbdata
--Wiping cache...
Formatting /cache...
Cache wipe failed.
--Applying Multi-CSC...
Installing Multi-CSC
Applied the CDC-code 'CPW'
Successfully applied multi-CSC.
i also wipe factorty and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
hi mate.
your problem is that you're trying to run a gingerbread rom, while you have an ICS/JB bootloader. the two use an entirely different partition scheme, so it's not finding the storage when it tries to access it. it seems to be a common occurrence, lots of people aren't aware that the two differ, when they're even aware that bootloaders exist.
if you look here : http://forum.xda-developers.com/showpost.php?p=37836094&postcount=2 , you'll find the solution i gave someone else that had that problem the other day.
to succesfuly downgrade from cm10 to stock GB you have to flash 3-file ROM with pit512 and re-partition checked.
You posted 2 topics the same
Answered : HERE
OH MY GOD LOL, ANOTHER ONE!
FLASH DBDATA.RFS AS PDA IN ODIN
AAAARRRGGGGHHHH!!!!!
Sent from my GT-I9000 using Tapatalk 2
I tried installing a ROM by factory formatting and cache formatting in CWM and then installing the ROM on install zip from sd card. In 1 second after attempting to install this ROM, CWM crashed and i wasnt able to use CWM again. So after googling how to 'unbrick' my SGS i found some method - flashing a stock ROM using downloading mode (middle button, Volume down, power button) then using ODIN and firmware from Sammobile. I tried this and NOW i get a bootloop and in in Android system recovery <3e>
E:failed to mount /dbdata (Invalid argument)
--Copying media files...
E:failed to mount /dbdata (File exists)
E:copy_dbdata_media:Cant mount /dbdata your storage not prepared yet. please use UI menu for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Appling Multi-CSC...
Installing Multi-CSC
Cant access to '/system/csc/02u/system/'.
Successfully applied multi-CSC
^Thats what i get and now i have no clue about what to do...Any suggestions?
Flash in a file called dbsdata.rfs.tar under PDA in Odin
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
Flash in a file called dbsdata.rfs.tar under PDA in Odin
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks!! Worked first time with no problems! If anyone else has this problem, here is the download file link. And i think ive attached the file on here..
http://mediafire.com/?2o8s8kiqsydstz1