ROM Manager just does not work.
................... So mad anybody buys this program it installs Clockwork Boot Partition but IT DOES NOT ALLOW TO UNINSTALL !!!! This is like a virus.
To make matter worse the program just does not work.
Download any RON from ROM Manager it boots to Clockwork Recovery "the virus" and just sits the with the clockwork Android/exclamation.
Clockwork does not answer emails.
Their Forum is full of people that like me are kind of nobbish and very mad that you can not restore the normal android partition.
Two questions anybody have any clue why the program does not work for me?
Failing that how to uninstall revert back to normal Nexus One configuration?
I seen somewhere where somebody says you download a file.
Run some commands from somewhere??? not sure where. I think if you find the the Android ADK you can connect you Nexus One to a computer, turn on some sort of terminal emulator "how?", type these commands from a promote in this emulator. THEY SAY THIS IS EASY ???
You know I live in Toronto I would pay somebody to revert my N1 to stock and not go through the hassle.
All this rooting stuff maybe nice, Titanium Back up, Shoot me, "Cool ROMs which I can not install with ROM Manager" but the education curve is not worth it in my book.
Did you click "flash clockwork recovery" at the top of the program?
pwig said:
Did you click "flash clockwork recovery" at the top of the program?
Click to expand...
Click to collapse
I did but it still does not work. Oh well tried to load CyanogenMod 6.0.0 said there was an error in recovery and it did not work.
pwig said:
Did you click "flash clockwork recovery" at the top of the program?
Click to expand...
Click to collapse
I did but it still does not work. Oh well tried to load CyanogenMod 6.0.0 said there was an error in recovery and it did not work got the exclamation android again
Did you flash anything? Or just root and install Rom Manager?
Here are the steps......
Made sure I was rooted, ran a few apps that require root permissions.
Ran ROM Manager,
Flashed the latest Clockmod Recovery
Select Download ROM
Selected CyanogenMod 6.0.0 "I know it work well at least they say so here"
First time select backup current ROM, I did not go for a wipe, selected Google Apps addon.
Watched and it seemed to back up,
Rebooted but.... everything looked the same.
About phone, looked at Andriod Version 2.2 Baseband , kernal Build FRF91
see CyanogenMod nowhere.
Sucker for punishment opened ROM Manager and it asked me if I wanted to report an error "cancel" tried to install CyanogenMod again, it went staright to Andriod Guy/Exclaimation, hit up volume/power, rebooted.
Now whenever I try again I get Andriod guy/exclamation.
I think if I hit "fix permisions in ROM Manager", Flashed CLockwork recovery again .... I can go back to the first step above.
Have you downloaded a rom off of xda and attempted to flash it through recovery?
You can download ROMs from ROM Manager.
I downloaded them from ROM Manager.
Is Rom manager listed under the allowed list under the superuser apps? And it doesn't seem like clockwork is properly loaded on the system, otherwise you would not see the android/with exclamation mark when you boot into recovery. You would see that the latest clockwork recovery is listed twice on the top of the phone. If you have both lines there, that means you have the latest recovery. If you are still having problems with the latest clockwork recovery to install, have you tried the earlier versions to see if they properly install on the phone?
From my experiences, you need to indeed wipe and install gapps to properly install any rom. Then use titanium backup to restore your apps and settings. Looks like you are already backed up/nandroid before doing so.
Wipe first. My fault I didnt see that you ddint wipe
v0kal said:
Wipe first. My fault I didnt see that you ddint wipe
Click to expand...
Click to collapse
I know most people say when you download ROMs you need to wipe.
I know with Android this should not be a big deal, enter your Google info, the market downloads everything you paid for and then set up exchange mail again but it does take me a few hours to go through the steps and I been lazy.
Try a wipe......
No one said rooting would be easy lol. Customizing one's possesion, let it be a car to a phone is no real small feat. Like anything, you can go into detail as much as you want or not depending on why type of Rom you choose and like. For CM6, that ROM is excellent for customizing pretty much everything on your phone, but it does take some time to get it to your liking.
If you like a "kitchen sink" ROM, have you looked at eVilD's Sense ROMs? Well thats if you like the Sense UI's really, which I do not mind, but everything is thrown in there lol. BUT CM6 is a great launching pad for a novice, like I still am.
I've had no problems with Rom Manager. which clockwork did you install? the beta or stable one? Cause i know when i was doing mine it asked me.
I did the following steps
1. Root
2. Installed Rom Manager and backed up
3. Downloaded Rom of my choice
4. Full wipe and installed rom (via rom manager)
The OP just didn't root, of course.
If the education curve isn't worth it - just uninstall the application. Because you didn't install anything besides the application - because you have no root privileges - because you didn't root. And since you state that you don't want to learn - then why did you start messing with it in the first place?
The only thing that I don't like about ROM Manager is that it creates a lot of people like the OP - starting to mess with something without any wish for understanding, how it works, screwing things up (or not), and start complaining. You did what you did, you didn't bother learning, so why exactly are you complaining?!
Well I will ignore Jack_r1 who is a troll.
"All boards have them ..... sigh"
For the people that were much more friendly and helpful,
Ok next time I try it I will do a full wipe.
Full wipe won't help you. Installing a root-only program without rooting the phone and expecting it to work wouldn't care if you wipe or not.
Guess you really have no clue...
Read my signature.
Calling me a troll won't help you either, and won't make you less infant. Especially for anyone who did bother reading my sig and my posts.
Jack_R1 said:
Full wipe won't help you. Installing a root-only program without rooting the phone and expecting it to work wouldn't care if you wipe or not.
Guess you really have no clue...
Read my signature.
Calling me a troll won't help you either, and won't make you less infant. Especially for anyone who did bother reading my sig and my posts.
Click to expand...
Click to collapse
I thought OP said he has root.
To OP: Open the app drawer, do you have the superuser app?
Mokurex said:
I thought OP said he has root.
To OP: Open the app drawer, do you have the superuser app?
Click to expand...
Click to collapse
I didn't bother reading his next post, where he said he had root. My mistake.
I believe he had the recovery installed initially (otherwise he wouldn't see it backing up), but the first reboot to stock ROM removed it. After that, he wasn't able to do anything, being booted to stock Android recovery. And came here to complain. I guess a difference between running a program and rebooting from different partition aren't common sense to understand? Should be a prerequisite list before rooting.
The correct way would be, of course, to reflash the recovery through ROM manager again, but for people who don't understand the concept of dual-booting and think they run an application - that's not obvious (and it's one of the reasons I think ROM Manager is bad, and manual installation is good). And the better way would be to read the guides and flash the recovery manually. And while going any of those ways, whining on internet boards instead of asking questions would be the most unwelcome way.
I use ROM Manager because I'm a lazy bastard and it has worked flawlessly for me. I have literally flashed over 50 ROMs (mostly CM nightlies) and it has yet to fail me.
But people that have no clue what they're doing shouldn't be using a program like this and I'm pretty sure it comes with a disclaimer of sorts? Although I've barely flashed anything manually I did read up on the processes before going the custom ROMs route, it just seemed obvious.
Me too - lazy bastard, that is...
However, there was an issue with one of the ROM Manager updates a while back, where backups wouldn't restore. That's when a bit of manual knowledge came in handy...
Sent from my Nexus One using XDA App
Related
PLEASE SEE BOTTOM OF OP FOR STEP BY STEP WALKTHROUGH
Hello Guys,
I’m a Sprint HTC Hero owner who is trying to get CM 6.1
My device has the latest OTA update 2.32.651.2
I went ahead and tried z4root which has 2 options, temporary and permanent. Went ahead and did temporary and it stated that it was rooted. Superuser shows up in my apps, so I went ahead and installed ROM manager as a youtube video said (gave a full successful walkthrough)…I open ROM Manager up and it says – You must root your phone for ROM Manager to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
Now using Astro File Manager, I checked those directories and it wasn’t there as ROM Manager stated, but in my SD Card, I see su-2.3.1-bin-signed…
Now my question is, should I try it with permenant root?
If not, what is the recommended next step?
Should I delete/uninstall everything I have that’s related to my previous root attempt and do the following:
http://forum.xda-developers.com/showthread.php?t=804296
I’m an Accounting major and a noob at this stuff…and I see people helping each other out here which is awesome, but I get confused trying to keep up with some posts where people are sent to other posts and so forth :/
Thank u in advance! Happy Holidays!
-------------------------------------------
Below is the process on a step by step basis from which i was able to complete it with the help of skndeep102. Thanks again buddy!
-Download z4root here: http://forum.xda-developers.com/showthread.php?t=833953
-Install and run app, press on Permenant Root
-Let it run until it says it has completed
-Once it has completed you will see the Superuser app in your drawer
-Download Rom Manager from the Market
-Open Rom Manager and press on Flash ClockworkMod Recovery at the top (give it a bit as it has to download it and then install)
I had already downloaded the CM 6.1 rom and had it on the SD card
-So i went ahead and hit reboot to recovery in ROM Manager
-Once it is in recovery, go ahead and scroll down to Nandroid and do a backup
-once you do a back up press back and reboot
-Once it starts up again head over to ROM Manager and select Install ROM from SD Card
-Look for the Rom, select it, and it asks you to Wipe Device and Cache, select both
-It reboots to recovery, select the rom and install
I hope i didnt miss a step, but thats pretty much it if i remember it correctly (spent much more time reading than actually doing, lol) Also, if there is something that isnt touched upon here just go ahead and read through as several questions were asked and answered along the way.
Hope it helps!
* Process confirmed to still be working as of 1/5/2011
da305kratos said:
Hello Guys,
I’m a Sprint HTC Hero owner who is trying to get CM 6.1
My device has the latest OTA update 2.32.651.2
I went ahead and tried z4root which has 2 options, temporary and permanent. Went ahead and did temporary and it stated that it was rooted. Superuser shows up in my apps, so I went ahead and installed ROM manager as a youtube video said (gave a full successful walkthrough)…I open ROM Manager up and it says – You must root your phone for ROM Manager to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
Now using Astro File Manager, I checked those directories and it wasn’t there as ROM Manager stated, but in my SD Card, I see su-2.3.1-bin-signed…
Now my question is, should I try it with permenant root?
If not, what is the recommended next step?
Should I delete/uninstall everything I have that’s related to my previous root attempt and do the following:
http://forum.xda-developers.com/showthread.php?t=804296
I’m an Accounting major and a noob at this stuff…and I see people helping each other out here which is awesome, but I get confused trying to keep up with some posts where people are sent to other posts and so forth :/
Thank u in advance! Happy Holidays!
Click to expand...
Click to collapse
I used permanent root when I did this
Sent from my HERO200 using XDA App
i am in the same position...the recommendation to me was to RUU to an older version and then root. I am not sure how to do that, so im hoping someone has another solution.
I personally dont trust those one click root options. Manual root requires a little more reading but I have never had an issue that way.
You can always try the permanent option. I dont see why you wouldnt want permanent anyway. If you use the temporary, its gonna unroot you when you reset your phone.
skndeep102 said:
I used permanent root when I did this
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Did the permenant root allow you to continue with the process?
RUU back to an older version just requires that you have the htc drivers installed and the ruu exe. You just double click the ruu exe and follow the instructions.
da305kratos said:
Did the permenant root allow you to continue with the process?
Click to expand...
Click to collapse
Yeah it worked for me I was rooted and had clockwork mod in about 10 minutes
Sent from my HERO200 using XDA App
kbizzle said:
RUU back to an older version just requires that you have the htc drivers installed and the ruu exe. You just double click the ruu exe and follow the instructions.
Click to expand...
Click to collapse
Where can I find the RUU? HTC's official site?
skndeep102 said:
I used permanent root when I did this
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I'm in the process of trying it...its been stuck at Rebooting for a couple mins now... :/
Wait and see at this point, i guess...
OK so I did the permenant root...and appearantly it worked since z4root is telling me it is and it now gives me the option to re-root and undo root...Also, when I open Rom Manager, it isn't telling me to root the phone...
However, I saw in another forum that a way to check if it is rooted is to download a terminal emulator and type in "su" after the $ ...When i do that it tells me permission denied....
What next?
da305kratos said:
OK so I did the permenant root...and appearantly it worked since z4root is telling me it is and it now gives me the option to re-root and undo root...Also, when I open Rom Manager, it isn't telling me to root the phone...
However, I saw in another forum that a way to check if it is rooted is to download a terminal emulator and type in "su" after the $ ...When i do that it tells me permission denied....
What next?
Click to expand...
Click to collapse
Just use room manager to flash clockwork mod recovery and you're done flash the rom of your choice
Sent from my HERO200 using XDA App
I went into ROM Manager and pressed on Flash ClockworkMod Recovery, it does its loading thing on the bar right ontop but it doesnt say anything...normal?
skndeep102 said:
Just use room manager to flash clockwork mod recovery and you're done flash the rom of your choice
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
It says that I must have ClockworkMod Recovery installed to flash and restore roms.
Where do I get this?
Just a heads up, it seems the root works, the su file is in bin and i tested out drocap2 screencapture app and gave it superuser permission. Worked perfectly...now if i could know where to get ClockworkMod Recovery as the Rom Manager I got from the market did not bring it :/
Use the "un-option" and try another method. I installed a stock ruu on my phone this morning to update my prl and tried the same app. It doesn't flash everything you need like the "flash_image" file. You need that to flash a recovery. I just re-rooted my phone the same way I did back in July. Take note that I am with cellular south and all I had to do is run a batch file and oila, there I am sitting in recovery. If you want to try another "root via app" method, you can try this-->View attachment UniversalAndroot.apk .
Instructions:
Open app and root
Download Rom Manager(which you have) and flash cm recovery.
I still think it probably won't work, but you can try anyway. I think these "rooting apps" only do enough so you can use apps like "AddFree"(or whatever it is) and others like it.
EDIT: In Rom Manager, the very first tab(up at the top) should say"Flash ClockworkMod Recovery". Press that one. It would ever flash for me until I went back to me nandroid.
dean.d said:
Use the "un-option" and try another method. I installed a stock ruu on my phone this morning to update my prl and tried the same app. It doesn't flash everything you need like the "flash_image" file. You need that to flash a recovery. I just re-rooted my phone the same way I did back in July. Take note that I am with cellular south and all I had to do is run a batch file and oila, there I am sitting in recovery. If you want to try another "root via app" method, you can try this-->View attachment 465856 .
Instructions:
Open app and root
Download Rom Manager(which you have) and flash cm recovery.
I still think it probably won't work, but you can try anyway. I think these "rooting apps" only do enough so you can use apps like "AddFree"(or whatever it is) and others like it.
EDIT: In Rom Manager, the very first tab(up at the top) should say"Flash ClockworkMod Recovery". Press that one. It would ever flash for me until I went back to me nandroid.
Click to expand...
Click to collapse
I see what you mean...Can anyone else pitch in on the aprt in regards to the rooting apps only doing enough for rooted apps use?
I read in another forum that I could just get the apk for ClockworkMod Recovery, install it, and then Head Over to ROM Manager and continue the process? any truth to that?
da305kratos said:
I see what you mean...Can anyone else pitch in on the aprt in regards to the rooting apps only doing enough for rooted apps use? I read in another forum that I could just get the apk for ClockworkMod Recovery, install it, and then Head Over to ROM Manager and continue the process? any truth to that?
Click to expand...
Click to collapse
Found the same thing. Just didn't work like that for me.
dean.d said:
Found the same thing. Just didn't work like that for me.
Click to expand...
Click to collapse
quick question, performance difference between stock 2.1 and lets say most roms out there a huge difference?
anyone else care to throw some input into my situation?
Happy Holidays btw...
Just a heads up, what worked for me, once I was rooted and downloaded ROM Manager I had to install Superuser.apk, then when I tried to flash clockwork recovery I got the Superuser dialog box asking for permission, then select allow. another awesome program to help is Android Commander that you install on your PC and it provides a gui adb access but you have to have sdk and adb installed on your pc, but if you look around there is info about it available. hope this helps, wish i had more time but i was just home on my lunchbreak, good luck
Before you tell me to 'Google it' (which I have, and leads me to 1000 posts of people telling other people with the same problem to 'Google it'), please read.
I will PayPal anyone $20 with working instructions of how to resolve this
Phone: HTC Hero w/ chin
Carrier: Alltel
Story:
Switched from WM6 Palm Treo Pro to HTC Hero. Came with 2.1 and needed apps2sd. Want CM7 stable.
-Rooted using AndRoot.
-Installed SuperUser and Root Checker. Root Checker said I was good to go. SuperUser would not show any apps in the list this whole time.
-Installed Titanium Backup which said I needed BusyBox, but it would fail to install. Tried to install busybox and it said I was not rooted. Alright...
-Installed ClockworkMod and flashed recovery. Tried to reboot into clockwork recovery, but when I clicked it, it did nothing. When I clicked rom from sd card, and clicked the CM7, it said 'going to reboot now' but again, nothing happened.
I booted into recovery manually, but it was still in Android system recovery. Apparently there was some sort of rooting problem, so I tried z4root. Permanent root was stuck on 'rebooting', and temporary root said successful, but something was still wrong as BusyBox installer would say I was not rooted, and SuperUser app didn't show any programs to allow permissions.
I turned the phone off, and back on. It goes to the white 'HTC' screen, reboots, and then comes to a black page with a picture of a Hero and a red triangle and exclamation mark. I hold home and hit power, and it takes me into the Android system recovery. I wiped data and cleared cache, rebooted, and it does the same thing.
- - -
Now i've done many hours of research, and found nothing to help me. I guess i'm a bit confused on what the SDK does and how to use it, because it won't connect to my phone since I can't even boot my phone into the OS. I tried to download the RUU and rename it update.zip, but it says signature verification failed or not found in android recovery. I've done the clear data method by holding home, back, and power, but still nothing.
I need a clearcut answer for getting back to a stock Alltel 2.1 OS on my phone. I am more advanced than a basic user, and have flashed many roms on Windows Mobile, but remember I might not exactly understand everything.
I'm a silent browser on these forums but now I come to you guys for help. I hope to grow into a dev and hopefully help someone in the future in my position.
I read somewhere to wipe EXT2, but still confused on that process as it seems I don't know how to get into adb command line on my computer.
Try reflashing the cwm recovery. Sounds like you have no recovery image.
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
Dumb question...did you flash a ROM? Maybe I missed it in your post, but I see you installed Clockwork, SuperUser and all that, but don't see that you flashed a ROM. *EDIT* I see you did...
So...worst case scenario, if you can't even boot your phone, just start over from scratch...
Download the original AllTel ROM from here.
If you don't have HTC Sync set up and can't restore from your computer, use this method to flash it...your phone should now boot...
Then try to reroot, using this (preferred) or this.
Download ROM Manager from the Market and install ClockworkMod Recovery
Boot to recovery (hold home and power at the same time).
Once in recovery, wipe cache, system, data and boot (make sure you don't wipe your sd card! Do it twice for good measure)
Select install .zip from SD card, select zip and you should be good to go with a rooted phone and a new ROM.
I think that should cover it...
Ok, on your first link to flash my phone, the step says:
"With phone powered on, do "adb reboot bootloader" to enter fastboot."
How do I get the command prompt on my computer to communicate with the phone? That was my biggest problem when reading other people's posts. I guess i'm a bit lost. I installed the r10 android sdk which I believe is the first step? And when my phone is connected to the computer to enter these commands, is it okay if it is sitting at that screen with the red triangle?
Thanks for your help btw your steps sound simple, and simple is nice. One step closer!
Do you have HTC Sync set up? If you do, you should be able to restore from that to get you back to official AllTel...That's going to be the easiest way to get you back to stock I think.
And...I am on a Mac So, helping someone on a PC is not my forte with ADB
I'd try setting up HTC Sync and get yourself back to stock that way.
EDIT - To get it to communicate, you need to set up ADB and all that. Then just use command prompts...Try this thread for help/instructions.
I actually got it to load that rom with vol down + power but eventually got to 'CID incorrect! Update fail!', so i'll try connecting to sync.
damienisxcore said:
I actually got it to load that rom with vol down + power but eventually got to 'CID incorrect! Update fail!', so i'll try connecting to sync.
Click to expand...
Click to collapse
What ROM? The AllTel one?
I have to take off until about 8:30 or so...get yourself set up with HTC Sync and get the USB drivers and all that set up, first thing you need to do is get your computer to talk to your phone...download the official AllTel RUU and restore to stock. That's task 1
Then we'll get ya rooted
I think I found a rom that worked. Currently rebooting. I can follow the rest and if I need anymore help, I'll give you a hollar. I should have had it right the first time, but I was following about 5 sets of different directions and mixing them around to avoid certain programs. I like yours though.
Send me a PM with your paypal e-mail and I can send it over. Least I could do.
OP, glad you got it. What rom?
Ranger, nice!
sent from a series of tubes.
il Duce said:
OP, glad you got it. What rom?
Ranger, nice!
sent from a series of tubes.
Click to expand...
Click to collapse
He flashed CM7. Gotta get him on aospCMod
damienisxcore said:
I think I found a rom that worked. Currently rebooting. I can follow the rest and if I need anymore help, I'll give you a hollar. I should have had it right the first time, but I was following about 5 sets of different directions and mixing them around to avoid certain programs. I like yours though.
Send me a PM with your paypal e-mail and I can send it over. Least I could do.
Click to expand...
Click to collapse
It's tough sometimes to follow things...and as much as we always tell people to search, ya know, the search kinda sucks I searched for all the threads I linked for you, but I knew what I was looking for. If you don't know what to look for, searching is kinda tough. Glad you got it!
Now...if you want a real ROM, I'll just toss this one out there In all actuality, CM7 and aospCMod are quite similar, I am just partial to aosp's builds.
Let me know if you need any more help.
Literally spent all day trying to root my CDMA Hero. Nothing works. I cannot use sync because it disconnects with the debugging and does not allow me to install a previous RUU. So I decided to use an app on the store (one click rooters like z4) it seemed like it worked, got SuperUser, said that my XC Chip was still on...soo I guess Im not rooted. Didn't notice that till I tried to install Cyanogenmod 7 2.3.2 on my device, which sent it back to my saved place (forgot what its called lol). Have no Idea where to go, anyone have a solution to the sync, seems like it would be the easiest way to do it. I have read the wikis, searched, done all I could do. Now I come to you, Help pleaseeee.
Software if you need it
Baseband Version 2.42.02.10.29
well i personally have had the same issues with one click roots,
Id HIGHLY suggest look at the Cyanogenmod wiki
to root and before rooting setting up ABD through the SDK
http://wiki.cyanogenmod.com/index.php?title=HTC_Hero_(CDMA):_Full_Update_Guide
edit: PM me if you need anything else
Are you still having trouble gaining root???
#Root/Hack-Mod_Always*
iHusk said:
Literally spent all day trying to root my CDMA Hero. Nothing works. I cannot use sync because it disconnects with the debugging and does not allow me to install a previous RUU. So I decided to use an app on the store (one click rooters like z4) it seemed like it worked, got SuperUser, said that my XC Chip was still on...soo I guess Im not rooted. Didn't notice that till I tried to install Cyanogenmod 7 2.3.2 on my device, which sent it back to my saved place (forgot what its called lol). Have no Idea where to go, anyone have a solution to the sync, seems like it would be the easiest way to do it. I have read the wikis, searched, done all I could do. Now I come to you, Help pleaseeee.
Software if you need it
Baseband Version 2.42.02.10.29
Click to expand...
Click to collapse
The XC, you are referring to is actually for Engineering bootloader S-ON or S-OFF. This has no effect on rooting your phone. Everyone here had S-ON until sometime late last year.
What OS are you running? Windows, Mac, Linux
32bit or 64 bit?
Did you flash a recovery?
Were you able to boot into recovery? (Power off phone, while holding home button, press the power button)
What did you get?
Did you try installing titanium backup to see if you were root?
Download busybox from the market and then open it up and install 1.18.
Try TB again.
Or try installing ROM manager and flash clockwork mod from the app.
Without more info it is really hard to help.
unCoRrUpTeD said:
The XC, you are referring to is actually for Engineering bootloader S-ON or S-OFF. This has no effect on rooting your phone. Everyone here had S-ON until sometime late last year.
What OS are you running? Windows, Mac, Linux
32bit or 64 bit?
Did you flash a recovery?
Were you able to boot into recovery? (Power off phone, while holding home button, press the power button)
What did you get?
Did you try installing titanium backup to see if you were root?
Download busybox from the market and then open it up and install 1.18.
Try TB again.
Or try installing ROM manager and flash clockwork mod from the app.
Without more info it is really hard to help.
Click to expand...
Click to collapse
Still having troubles. Im running 64 bit Windows, I thought I flashed a recovery.
When I press home and power to power on I get
"Clearstorage" "Yes" "no"
thats all...
I installed wireless tether for root, when I went to install Cyano it deleted all my apps besides superuser and wont let me download any of them anymore...
You need anymore info?
coffeehandle said:
well i personally have had the same issues with one click roots,
Id HIGHLY suggest look at the Cyanogenmod wiki
to root and before rooting setting up ABD through the SDK
wiki.cyanogenmod.com/index.php?title=HTC_Hero_(CDMA):_Full_Update_Guide
edit: PM me if you need anything else
Click to expand...
Click to collapse
Yes I read this, this is actually what I used. Problem is that I cannot use HTC Sync. It never lets me update my RUU for some odd reason...
Update lol. Seems like I am still rooted, I can download and use Wifi Tethering for Root Users. And when in Astro file manager I have a file called \root I believe. question is where do I go from now!
Well it depends on what you want to do with your phone. If its running fine then leave it and just boot into recovery and make a backup incase you need it in the future. To do this "make a backup "
Power off. Then hold down volume down and press power. After the white screen appears press home and wait until your recovery appears. Then select backup and restore. From there you should be able to figure it out. If not then just post and you'll receive advice from other members or my self. If you were looking to further mod your phone you could load one of many custom roms provided by the great developers here, increase internal memory to add more storage, load a different kernel to overclock or change the look of your phone
by flashing a custom theme. Its up to you how far you want to take your phone. Well hope this helps.
#Root/Hack-Mod_Always*
laie1472 said:
Well it depends on what you want to do with your phone. If its running fine then leave it and just boot into recovery and make a backup incase you need it in the future. To do this "make a backup "
Power off. Then hold down volume down and press power. After the white screen appears press home and wait until your recovery appears. Then select backup and restore. From there you should be able to figure it out. If not then just post and you'll receive advice from other members or my self. If you were looking to further mod your phone you could load one of many custom roms provided by the great developers here, increase internal memory to add more storage, load a different kernel to overclock or change the look of your phone
by flashing a custom theme. Its up to you how far you want to take your phone. Well hope this helps.
#Root/Hack-Mod_Always*
Click to expand...
Click to collapse
How do you flash it? Is it basically the same as when I did Cyanogenmod, just go to ROM manager and install it or what? Thanks for all the help btw, I got 2.3 now, just trying to get it the way I want now...
Im a little puzzled as to when you post "flash it" care to share what it is your referring to. If its a rom, then yes you could flash it threw rom manger, but I wouldn't recommend it. The safest way Imo is threw your recovery if you want to flash a rom. Also if your referring to a rom which one??? And when you post "the way you want" what is it that your trying to achieve???
#Root/Hack-Mod_Always*
laie1472 said:
Im a little puzzled as to when you post "flash it" care to share what it is your referring to. If its a rom, then yes you could flash it threw rom manger, but I wouldn't recommend it. The safest way Imo is threw your recovery if you want to flash a rom. Also if your referring to a rom which one??? And when you post "the way you want" what is it that your trying to achieve???
#Root/Hack-Mod_Always*
Click to expand...
Click to collapse
Looks wise and apps is what I mean by "the way I want". And basically what I am talking about is custom themes/looks. How would I flash those through recovery. Thats what I am puzzled about lol
Well if your on 2.3 you should have the theme chooser. If that's the case you locate the theme apk. Download it to your sd card. Then open up a file manger and install the theme apk as you would a regular app. Then exit out of your file manger and go to your app drawer and open up theme chooser. Then select the theme you just installed. After its done installing just reboot. Some of the theme chooser themes have extra add on you have to apply to get the full look of theme. The add ons you have to install via zip themer or metamorph. The zip themer you can find in the android themes and apps thread. It might be on the android market but I'm not sure. Metamorph you can find on the android market. If you need help with that aquire either app and just let me know. Now if your theme is flashable via recovery. Download the theme to the root of your sd card. Which means just put the theme on your sd card and not in any folders. Then boot into recovery by powering down. Then hold volume down. Then press the power button. After the screen appears press the home button. Then when your recovery appears. Always make a backup first. Then choose install update zip or flash update zip. Then locate the theme zip and press the track ball. It will ask you to confirm press the track ball for yes or home for no. Press the track ball and when its done press back and choose reboot. When you reboot you should have your rom themed. Make sure the theme your flashing is for your rom because not all themes are for all roms and if you flash the wrong theme you could be entering boot loop city. Also make sure your battery is at least 60 % to flash anything. This is just my opinion on the battery. Well hope this helps. If you find a certain theme you want to install let me know if you run into any problems.
#Root/Hack-Mod_Always*
For a person with little or no knowledge on doing all the flash stuff with the Tablets..would you say this app would help alot? Or doing it without the app is better?
I seen the video of someone using it..on a phone tho...seems nice. Didnt see VEGAn TAB anywhere in the options thing. That would be able to find this also in "Download ROMS" right? Thanks for the help.
DJR0D said:
For a person with little or no knowledge on doing all the flash stuff with the Tablets..would you say this app would help alot? Or doing it without the app is better?
I seen the video of someone using it..on a phone tho...seems nice. Didnt see VEGAn TAB anywhere in the options thing. That would be able to find this also in "Download ROMS" right? Thanks for the help.
Click to expand...
Click to collapse
Rom Manager has been known to hose some users gTabs making them very difficult to fix.
Well, the recovery hooks used by the ROM manager app cause problems with the GTablet... I recommend avoiding it!!
Yea....after all the good i read about it....i saw all the bad stuff. Too bad...that would have been the thing for me to be brave and flash. With that it made it seem pretty easy. Oh well. Gotta learn the real way soon.
Anyone on here use this with the GTab and had success???? Alot say this is not good with the GTab. Some say it is. Man...
its not worth using on the gtablet. Trust me, once you figure out how to do a few other things, you wont need this tool anyways. Start looking through this site. You will learn a lot. http://viewsonic-gtablet-for-dummies.webs.com/
ROM Manager is just a GUI interface to installing .zips (ROMs, updates, etc..).
However, it requires a specific version of Clockworkmod Recovery to work.
If you already have Clockworkmod Recovery on your Gtablet, it's just as easy to use it manually than hoping the Rom Manager specific Clockworkmod Recovery doesn't brick your tablet.
Donwload the ROM you want, power off and boot in to clockworkmod recovery (Hold Volume + while powering on) and select the install .zip from sdcard. Just browse to the downloaded .zip and install it.
It's best to also do a factory reset before installing a rom....and making a backup before you flash something new in case you don't like it or it has issues.
Earlier it had a lot of problems....I think they've resolved most of those issues (Rom Manager now lists the Gtablet SMB_A1002 when flashing the recovery), but it's still so simple to flash manually and not worry the risks.
I appologize in advance if I missed a thread addressing this. But here is my problem.
I'm running system version 5.6.890 stock rooted (thanks to the great folks here).
The next step I wanted to take was to install CWM Recovery and perform a backup. I downloaded ROM manager from the marketplace, installed it, selected Flash ClockworkMod Recovery. It worked and it now says my current recovery is ClockworkMod 5.0.2.6. The "backup current ROM" feature in ROM manager will not work, so I selected the "reboot into recovery" feature in ROM manager and all it does is reboot the phone normally.
How do I get the phone to boot into recovery? I know I'm missing something simple and I've tried searching the forum but I had no luck. Thanks in advance for your help, you guys have an awesome forum here and I've already learned alot, but the acronyms are kicking my ass!
You need a bootstrap, go into development section and look into the safestrap topic, read instructions and download
Sent from my DROID3 using XDA App
That's what I thought, and I actually read through that thread, but I'm still not understanding it. I guess I need a more detailed explanation on what exactly a boot strapper does and how to implement it. Is there some kind of noob "dummy" guide you can point me to that will explain all of the main things about rooting/recovery/roms etc? I wish there was an all in one explanation guide I could read that would clear up alot of my questions so I dont have to post a bunch of times. I keep reading threads but they are geared at people that already know the basic stuff, which in my case I dont lol.
Okay so I downloaded and installed bootstrap recovery. Hit "bootstrap recovery", granted it root access. Then hit reboot recovery and it rebooted into CWM recovery. But I cannot perform a backup, it says it can't mount SD card?
Try going to mounts and storage - mount sd card. See if that works for ya.
Sent from my DROID3 using XDA App
ChaoticWeaponry said:
Try going to mounts and storage - mount sd card. See if that works for ya.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
I tried that and it just says it cant mount SD card?
After more reading I really screwed up I think. I wish I would've went the safestrap route instead of CWM route. Now I'm stuck with a CWM install that won't let me perform a backup, and I have absolutely no idea how to uninstall the CWM recovery so I can safely install safestrap.
There are millions of android forums on the net and I've searched this forum up and down, searched google, youtube, and I'm more confused now than when I started! It's amazing how there is so much info out there yet nobody can ever put any of it into english. I can't find a straight answer anywhere, and it amazes me there are not stickies with step by step guides on how to do this stuff. I've never had so much trouble learning something in my life. How is a newbie supposed to pick this stuff up? I'm not completely stupid when it comes to this stuff, I have a decent understanding of how things work, but the acronyms on android forums are at higher level than anywhere I've ever seen. I just wish I could find some good write-ups that went into explanations about how things work.
insanespain said:
I tried that and it just says it cant mount SD card?
After more reading I really screwed up I think. I wish I would've went the safestrap route instead of CWM route. Now I'm stuck with a CWM install that won't let me perform a backup, and I have absolutely no idea how to uninstall the CWM recovery so I can safely install safestrap.
There are millions of android forums on the net and I've searched this forum up and down, searched google, youtube, and I'm more confused now than when I started! It's amazing how there is so much info out there yet nobody can ever put any of it into english. I can't find a straight answer anywhere, and it amazes me there are not stickies with step by step guides on how to do this stuff. I've never had so much trouble learning something in my life. How is a newbie supposed to pick this stuff up? I'm not completely stupid when it comes to this stuff, I have a decent understanding of how things work, but the acronyms on android forums are at higher level than anywhere I've ever seen. I just wish I could find some good write-ups that went into explanations about how things work.
Click to expand...
Click to collapse
If you want to use safestrap, just uninstall CWM bootstrap via settings -> applications -> manage applications. Install and open Hashcodes safestrap, click install recovery. It will take care of any files left over from CWM. Reboot hit [menu] at the safestrap splash screen you will be in recovery.
eww245 said:
If you want to use safestrap, just uninstall CWM bootstrap via settings -> applications -> manage applications. Install and open Hashcodes safestrap, click install recovery. It will take care of any files left over from CWM. Reboot hit [menu] at the safestrap splash screen you will be in recovery.
Click to expand...
Click to collapse
Finally, a clear answer! This is exactly what I wanted to know. I was thinking I would need to manually remove files leftover from CWM bootstrap.
insanespain said:
Finally, a clear answer! This is exactly what I wanted to know. I was thinking I would need to manually remove files leftover from CWM bootstrap.
Click to expand...
Click to collapse
Normally you would, but not with Safestrap
I did this and now I'm stuck and the dual core screen and phone wont boot.
After a SUPER long night and wanting to blow my brains out, I got my phone working again. I had to reflash it to a stock rom. I used the method and files from this post http://rootzwiki.com/topic/4370-sbf-droid-3-fastboot-files-55959-and-56890/ .
I know have a bone stock non-rooted phone that works again. I guess that installing the safestrap without removing files from CWM recovery install wasnt a good idea? I would like to re-root this thing and get safestrap installed correctly and perform a nandroid backup, but I want to avoid problems this time.
insanespain said:
That's what I thought, and I actually read through that thread, but I'm still not understanding it. I guess I need a more detailed explanation on what exactly a boot strapper does and how to implement it. Is there some kind of noob "dummy" guide you can point me to that will explain all of the main things about rooting/recovery/roms etc? I wish there was an all in one explanation guide I could read that would clear up alot of my questions so I dont have to post a bunch of times. I keep reading threads but they are geared at people that already know the basic stuff, which in my case I dont lol.
Click to expand...
Click to collapse
You cannot use Rom manager, the CWM recovery that is uses isnt for the D3. If you go to the market there is a D3 bootstrap which installs the recovery and then you boot into recovery from the application. OR if you dont want to spend any $$ you can install Hashcodes safestrap.
https://market.android.com/details?id=com.koushikdutta.droid3.bootstrap <--- Koushs bootstrap in the market
http://forum.xda-developers.com/showthread.php?t=1315982 <--- link to d/l safestrap
I would suggest the safestrap, after you install the APK open it up and click install recovery. After that is done reboot your phone and you will see a splash screen and it gives you the option to press 'menu' and boot into recovery.
http://www.droidforums.net/forum/droid-3-hacks/181416-how-install-safestrap-create-backup.html <--- safestrap install instructions
http://www.droidforums.net/forum/droid-3-hacks/181636-how-use-safestrap-backup-flash-wip.html <--- how to use safestrap
Read through the above threads on how to use safestrap.
EDIT: Sorry didn't see you already discovered koush's strap so just go with the safestrap and read read read read read! Since your on a clean system now it should be cake, just follow instructions and you'll be fine. Need more help just ask.
new to here,I hope I can also learn something useful.
insanespain said:
I did this and now I'm stuck and the dual core screen and phone wont boot.
Click to expand...
Click to collapse
Power off your phone and hold m + power. Scroll down to bp tools using the volume down key and select it with the volume up key.
If that doesn't work you're going to need to SBF your phone back to bone stock 5.6.890..
Edit - my bad didn't read all the posts
Sent from my DROID3 using XDA App
Cdjones187 said:
You cannot use Rom manager, the CWM recovery that is uses isnt for the D3. If you go to the market there is a D3 bootstrap which installs the recovery and then you boot into recovery from the application. OR if you dont want to spend any $$ you can install Hashcodes safestrap.
https://market.android.com/details?id=com.koushikdutta.droid3.bootstrap <--- Koushs bootstrap in the market
http://forum.xda-developers.com/showthread.php?t=1315982 <--- link to d/l safestrap
I would suggest the safestrap, after you install the APK open it up and click install recovery. After that is done reboot your phone and you will see a splash screen and it gives you the option to press 'menu' and boot into recovery.
http://www.droidforums.net/forum/droid-3-hacks/181416-how-install-safestrap-create-backup.html <--- safestrap install instructions
http://www.droidforums.net/forum/droid-3-hacks/181636-how-use-safestrap-backup-flash-wip.html <--- how to use safestrap
Read through the above threads on how to use safestrap.
EDIT: Sorry didn't see you already discovered koush's strap so just go with the safestrap and read read read read read! Since your on a clean system now it should be cake, just follow instructions and you'll be fine. Need more help just ask.
Click to expand...
Click to collapse
Thanks for the replies and the links. I had a LONG night last nite getting this thing working again. I will root again when I get home and try safestrap this time from the begining. Would it be safe to say that my problem was initially installing cwm from rom manager?
Sent from my DROID3 using Tapatalk
victy23 said:
new to here,I hope I can also learn something useful.
Click to expand...
Click to collapse
There's a lot of info here, but I'm having a hard time making heads or tails of it. A lot of posts assume that you already know the lingo and basic tasks or modding an android device, and when you are brand new like myself it can be hard to understand a post if you don't know all of the terminology.
Sent from my DROID3 using Tapatalk