Need STOCK CDMA ROM for Diamond (500) - Touch Diamond CDMA

I have 2 Diamonds atm and I'm sending one back. I flashed a custom ROM on the one I'm sending back and would like to put the stock ROM back on. The trouble is, when I go to HTC's site and choose the stock ROM, I put in my S/N (tried on both phones) and it says invalid SN. So I'm kind of stuck and it needs to be in the mail tomorrow (Wednesday October 20, 2010).
Can anyone help me just get a stock ROM tonight please? I'll be your best friend.
Regards,
rast4man

Please see this one :
forum.xda-developers.com/showthread.php?t=802457
hope this will helps

Thanks!
Perfect. I actually saw this in the forum but the name: *OFFICIAL* Victor_C_SPRINT_WWE_2.00.651.7_RS_1.11.00F_NV_1.53 _0910_PRL60651_Ship.exe made me think that it was a custom ROM.
I downloaded it and flashed it back to stock and it's in the Sprint return envelope and ready to go. Thanks a ton.
Regards,
rast4man

Related

Flashing CHT9110 ROM for noob

Hi to all the expert out there,
I just recently owe my very first PDA phone - CHT9110 and yes is from Taiwan, therefore it is all in mandarin (chinese). I've been reading alot about flashing ROM and hearing alot from friend about this as well.
However after such research and reading I still couldnt figure out how exactly I should do it. I hope you guys here can help me out.
From my understanding, to flash a ROM you need to do the following
1 - Unlock SSID
2 - Update Radio
3 - Install the new ROM
Are these steps correct?
My friend told me not to simply flash my phone because if the ROM I used is not compatible then I will get "Invalid Vendor ID" where I have to send it back to the shop I bought to get it fix, is it? Or is there anyway I can fix it myself? He also told me that P3600i ROM is meant for P3600i not CHT9110. If If I wanna flash CHT9110 I have to use CHT9110 ROM, is that true?
I've search around this board and also www but failed to locate any update on this ROM for CHT9110, I would appreciate it if anyone of you can share some thought with me here.
*Note that I have to get a clear picture of what I am doing before flashing it as I wouldn't want to send my phone back to the shop because I'm from other country and it will be troublesome to do so.
Thank a million!
wssoo said:
Hi to all the expert out there,
I just recently owe my very first PDA phone - CHT9110 and yes is from Taiwan, therefore it is all in mandarin (chinese). I've been reading alot about flashing ROM and hearing alot from friend about this as well.
However after such research and reading I still couldnt figure out how exactly I should do it. I hope you guys here can help me out.
From my understanding, to flash a ROM you need to do the following
1 - Unlock SSID
2 - Update Radio
3 - Install the new ROM
Are these steps correct?
My friend told me not to simply flash my phone because if the ROM I used is not compatible then I will get "Invalid Vendor ID" where I have to send it back to the shop I bought to get it fix, is it? Or is there anyway I can fix it myself? He also told me that P3600i ROM is meant for P3600i not CHT9110. If If I wanna flash CHT9110 I have to use CHT9110 ROM, is that true?
I've search around this board and also www but failed to locate any update on this ROM for CHT9110, I would appreciate it if anyone of you can share some thought with me here.
*Note that I have to get a clear picture of what I am doing before flashing it as I wouldn't want to send my phone back to the shop because I'm from other country and it will be troublesome to do so.
Thank a million!
Click to expand...
Click to collapse
till today still no any tools to do..you have to wait like many people.
That's sad..
So I just can't use other ROM for other model to do flashing?
Well can this be use anyway
http://www.xanda.org/index.php?page=flashing-rom-or-upgrade-guide
It stated is for P3600i not CHT9110
I know is the same device and spec and everything but for some reason, my friend did it once where he flash CHT9100 with P3600 ROM and ended up getting Invalid Vendor ID.. Therefore I need confirmation to proceed or at least what can be done when I get the error..
Thank alot..

Restore to Original for RMA (Telstra AU)

I'm having sound issues with my HTC Diamond and I'm wanting to send the damn thing back to repair or whatever.
Before i do, I'm guessing I'll need to restore it to its original form, I've flashed it to udK at the moment. It's a Telstra Unlocked Diamond.
Can someone guide me through on how to restore it to its original state, eg flash everything back and remove HardSPL etc...
Many thanks in advanced !
sorry dude.. but coulod you please tell me how you flashed the telstra ROM.. just cant seem to get rid of the damn thing..

How to return phone to standard - Phone needs sending back

Ive put a hard SPL on, unlocked it, and put dutty's rom on.
After many months of it working fine, the backlight has decided to never turn off and the hardware buttons no longer work.
I need to send the phone back but im worried that they will reject it if they find out that ive messed with the rom.
How can i return it to standard so i can send it off - spl etc that is, because im ok with the rom, i can just use HTC's offical one.
Or, on the flip side, does anyone reckon they wont check? - im with orange UK.
Cheers for any help guys
hi m8 you will need the ruu.signed stocksigned hard spl- not 100% sure but i think you have to hard reset afterwards.
View attachment RUU_Signed.zip hope this helps
not sure if i`m allowed to add other peoples attachments so sorry and if mods want to delete it then please do
is this 1.24, 1.37, or 1.93
Please advise where to find 1.93 signed
There are all the original ROMs on Duttys site.
Look here #39 do this
http://forum.xda-developers.com/showthread.php?t=400950&page=4
the stocksigned i posted is 135 but your better off following omaga and the link he has posted cos you will need custom rru and you`ll find all the stuff you need in the link
I have my self used this guide when I put my Diamond back in orginal shape, so its works. Put/find your org 1.93 rom first flash it in your phone and then flash the 1.93spl signed. Worked for me!
kk - cheers for the help guys
Got my new one now, so the fun starts again!

Help with Rolling back to Original ROM..

Ok, GUYS i am so frustrated here...i only wanted to unlock my diamond so i taught i might have to put new rom too so now i end up putting new rom..this is a brand new device..i do not need any tweaks and stuff..anyway..now i do have unlock diamond and CID Unlock but i also have FULL OF BUGS ROM...
This is what i have...
HardSPL 1.40 Olinex
Radio 1.5
ROM:-> Macadam! V1.1
Seriously this people should not be allow to put their ROMS in the forums unless they verify and sure that there are no BUGS..
Now, I want to go back to Rogers Radio and ROM and SPL..how can i go about doing that..i do not have copy of current ROM...if anyone have a copy of ROGERS ROM..plz post it and give me a instruction of putting it back...I did follow wiki to revert back but it did not work..I try to put new Stock Rom from HTC..it did not work either...can some one please help..ALL HELP will be appreciated thx..
I did lots of search to bring back the STOCK ROM and I spent two full days..but I was not succeeded..let me see the link..thx bro
Ok, I am downloading the Rogers ROM but now can I put this rom since I have HardSPL 1.40 Olinex..will there be a problem?..Another thing..I was trying to put stock rom from HTC but it did not work it was giving me an Error "ERROR 244 INVALID MODEL ID"..do you have any IDEA why is that?..I do have CID UNLOCK..So when it goes to Rainbow color screen it says "Security Unlock" on the top...
Ok man, calm down and do a search..
I had the Rogers ROM posted MONTHS ago.
http://forum.xda-developers.com/showthread.php?t=455347
hertstealer said:
Ok, GUYS i am so frustrated here...i only wanted to unlock my diamond so i taught i might have to put new rom too so now i end up putting new rom..this is a brand new device..i do not need any tweaks and stuff..anyway..now i do have unlock diamond and CID Unlock but i also have FULL OF BUGS ROM...
This is what i have...
HardSPL 1.40 Olinex
Radio 1.5
ROM:-> Macadam! V1.1
Seriously this people should not be allow to put their ROMS in the forums unless they verify and sure that there are no BUGS..
Now, I want to go back to Rogers Radio and ROM and SPL..how can i go about doing that..i do not have copy of current ROM...if anyone have a copy of ROGERS ROM..plz post it and give me a instruction of putting it back...I did follow wiki to revert back but it did not work..I try to put new Stock Rom from HTC..it did not work either...can some one please help..ALL HELP will be appreciated thx..
Click to expand...
Click to collapse
The one that you give me the link..that Rom is not Rogers Shipped ROM..and i think i might brink my Diamond...
Ok Guys..I seem to get no Luck..I posted this few weeks ago and I am still stuck with Bug Rom..Now, 1st thing I can not find Rogers Stock Rom..2nd I found a HTC Stock Rom but it will not install on my phone..it gives Error 244 "Invalid Model ID", so I do not know what to do..I was searching online to find the solution and someone said it because it is trying to overwrite the HardSPL, So I am thinking to change my 1.40 Olinex to 1.23 something but from XDA Forum it says install OS before overwriting HardSPL..any ideas..HELP PLZ..And PPL who make this Coocked ROM PLZ STOP..You ruining ppl phoneS..all I wanted to do is Unlock my phone,so i taught i might have to change ROM too so here I am stuck with messy ROM...Once Again My phone is Unlcok,its CID UNLOCK and Security Unlock..PLZ HELP
There is no STOCK rogers rom for the Diamond. Flash the one noted above, it is a COPY of the stock rom, extracted from a stock Rogers Diamond. It does not contain the SPL for Boot splash, other than that it IS a stock ROM.

Need to send back to HTC, Please Help

Hey guys, have a Touch HD, and have to send it back to HTC because its crapping out on me, but before sending it back to them, i want to return the software and rom back to the normal posstion as it was
please help me
im running Davidukes rom currently but i want to return everything back to its original way it came when i bought it, ROM, Hard-SPL because i think i needed to update something in order to install a custom rom, and anything else that needs to be changed back, i know how to change i just need links where to download everything original for it to be back the way it was so that the ppl in HTC dont say anything
elite-fusion said:
Hey guys, have a Touch HD, and have to send it back to HTC because its crapping out on me, but before sending it back to them, i want to return the software and rom back to the normal posstion as it was
please help me
im running Davidukes rom currently but i want to return everything back to its original way it came when i bought it, ROM, Hard-SPL because i think i needed to update something in order to install a custom rom, and anything else that needs to be changed back, i know how to change i just need links where to download everything original for it to be back the way it was so that the ppl in HTC dont say anything
Click to expand...
Click to collapse
To restore stock SPL & rom for warranty purposes read bottom of first post in this thread. All links, downloads should already be provided in guide.
Thread closed

Categories

Resources