Okay i see a need for an update zip for clockwork. here is the kernel i extracted from stock ji6 and put in an update.zip package for the people having trouble and getting stuck after a Nandroid restore and not being able to boot.
clockwork update.zip of ji6 kernel (zimage)
http://www.mediafire.com/?phhed5z36zayaiq
clockwork update.zip of JFD kernel (zimage)
http://www.mediafire.com/?f8tkd1f2acn4cfs
Here is the ji6 kernel tard to play around with
http://www.mediafire.com/?1tavj1bjw1on350
Here's eugenes back kernel support that flashes the jfd kernel ji2 modem and should work with anybuild.
http://www.4shared.com/file/R-kSutBV/JAC_AND_KING_KERNEL_FOR_JI_BUI.html
Back kernel support UNINSTALL.zip
http://slighpcs.com/downloads/android/signed/KernelBackportUninstall-signed.zip
Note: if you dont want the ji2 modem just flash a kernel.
I recommend you keep this on your SD card just in case a restore wont boot. Im sure this may help some
So I think I'm a little confused, is this a stock restore or for Clockwork? And if clockwork, is this a permanent flash or just what we have already (safe non flash)?
These are just stock kernels you can flash with clockwork mod.
Sent from my vibrant
Thanks for this but I have a question , say if I want to use 2.2 right but then I want to nandroid restore back to my 2.1 but the nandroid restore doesn't restore the kernel would I just flash the kernel then nandroid restore?
Sent from my SGH-T959 using XDA App
No you would do your nandroid restore and after its done it will boot into recovery again then you would install your kernel and then reboot
Sent from my vibrant
blackerwater said:
No you would do your nandroid restore and after its done it will boot into recovery again then you would install your kernel and then reboot
Sent from my vibrant
Click to expand...
Click to collapse
And my phone won't get bricked or anything? Are you positive lol
Sent from my SGH-T959 using XDA App
I forgot that the rom I want to restore is fusion with jacs oc kernel so that won't work right?
Sent from my SGH-T959 using XDA App
No only CM bricks the vibrant . lol
Sent from my vibrant
Ive tested these and they work great...
Sent from my vibrant
blackerwater said:
No only CM bricks the vibrant . lol
Sent from my vibrant
Click to expand...
Click to collapse
Lmao
Sent from my SGH-T959 using XDA App
sTyLeSz said:
I forgot that the rom I want to restore is fusion with jacs oc kernel so that won't work right?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
My last question I promise lol I'm a noob I know lol
Sent from my SGH-T959 using XDA App
Well ji6 would let it boot but then you would need to flash jacks kernel.
Sent from my vibrant
blackerwater said:
Well ji6 would let it boot but then you would need to flash jacks kernel.
Sent from my vibrant
Click to expand...
Click to collapse
Ok bro thanks aloy for this
Sent from my SGH-T959 using XDA App
blackerwater said:
Okay i see a need for an update zip for clockwork. here is the kernel i extracted from stock ji6 and put in an update.zip package for the people having trouble and getting stuck after a Nandroid restore and not being able to boot.
clockwork update.zip of ji6 kernel (zimage)
http://www.mediafire.com/?phhed5z36zayaiq
clockwork update.zip of JFD kernel (zimage)
http://www.mediafire.com/?f8tkd1f2acn4cfs
Here is the ji6 kernel tard to play around with
http://www.mediafire.com/?1tavj1bjw1on350
I recommend you keep this on your SD card just in case a restore wont boot. Im sure this may help some
Click to expand...
Click to collapse
TY! I have been looking for this
Im going to post the back kernel update.zip here also . Might as well keep it all together...
Sent from my vibrant
AWESOME JOB OP!!! Lots of people have been asking for these lately.
Thank you, these will come in handy.
A lot of people are under the impression that nandroid backs up the kernel and subsequently get soft bricked when restoring from a custom ROM.
To create these for custom ROM's would one just unpack, replace the zImage and re-pack?
andy696 said:
Thank you, these will come in handy.
A lot of people are under the impression that nandroid backs up the kernel and subsequently get soft bricked when restoring from a custom ROM.
To create these for custom ROM's would one just unpack, replace the zImage and re-pack?
Click to expand...
Click to collapse
Yes that should work.
Sent from my vibrant
Can't figure what am I missing: I had ji6 kernel, flashed backsupport files and TW core v1, which worked fine, but I ran into an overheating issue and would like to go back to ji6. Saved the corresponding clockmod zip from this thread to sd, tried to flash - no go. What am I missing? Should I first "undo" backsupport somehow?
Sent from my SGH-T959 using XDA App
+1 perfect idea that I almost thought of (meaning I didn't...but should have)
Related
I need ROM to flash with Odin. Clockwork thing is not working for me and all the modded rom's are clockwork oriented. I am actually dying to install cynogen. Off late they stopped releasing odin versions. Somebody please suggest some rom better than the stock Froyo which is flashable using odin.
My phone is rooted and unlocked.
get clockwork working properly....so much is riding on clockwork...
have you asked for help making it work properly?
what is not working with clockwork
Sent from my SAMSUNG-SGH-I897 using XDA App
phone tries to reboot and gives error while installing from the sd card.
varunkumars said:
phone tries to reboot and gives while installing from the sd card.
Click to expand...
Click to collapse
What are you running
Settings, about phone
What is your baseband, build.
Are you in leaked froyo ji6
Sent from my SAMSUNG-SGH-I897 using XDA App
Exactly i am in leaked froyo ji6. I rooted it.
You have two options. Swap in a kernel that has 2e recovery or flash back to stock and then flash the rom of your choice.
Sent from my GT-I9000
What he said. I would use odin to flash stock
http://forum.xda-developers.com/showthread.php?t=731989
The version you are on had a recovery that prevents you from using clockwork
Sent from my SAMSUNG-SGH-I897 using XDA App
Ok so I posted a thread earlier about how my usb drivers arent working at all so using odin to flash back to stock is not an option. I did however successfully root and install andromeda without them. Now heres the problem, I backed up the stock rom using rom manager. Anromeda installed a kernel and modem so I cant use rom manager to back up the rom unless I get the kernel and modem back. My question is could I somehow find the stock kernel file and use neldars sgs kernel flasher to flash the kernel back while still using the andromeda rom withouth having any problems? Also, will the modem affect my rom at all because I will change it as soon as i switch roms
H you can not flash a 2.1 Kernel on a 2.2 rom
Not sure what you are looking to do though
Im looking to install a different rom the problem is that I cant use odin because of the drivers not working. What im trying to say is if i flash the backup stock rom from rom manager its going to cause problems because its using andromedas kernel right?
Let me put it like this...is their another way to flash back to stock without using odin and without using a usb cable?
mossination said:
Let me put it like this...is their another way to flash back to stock without using odin and without using a usb cable?
Click to expand...
Click to collapse
yes. you will need a CWM flashable zip of a 2.1 kernel and modem.
you would boot into CWM, flash that zip that includes kernel and modem, then restore your nandroid backup
ok thankyou!!! Ill try and locate the files myself but if anyone knows where they are and can tell me would be much appreciated.
why dont you just flash a 2.2 kernel with built-in clockwork mod recovery? you dont have to keep the kernel that came with your rom...
so... use sgs kernel flasher, why not? flash a new kernel then boot into its recovery (usually thrugh the power button menu on custom rom/kernels)...
Because I'm trying to install another custom rom, if i install a 2.2 kernel then flash back to.the stock rom which is 2.1 wont that cause problems?
Sent from my SGH-I897 using XDA App
H you can not flash a 2.1 Kernel on a 2.2 rom
Not sure what you are looking to do though
__________________
| Diamond Draft 10.0.1 | 4Videosoft DVD to iPad Converter 3.3.10 | ZeroTraces WinCleaner N' Optimizer 2.6.1.2 | Email Compare & Remove Duplicate Lists Software 7.0 | OUTLOOK2PEN 9.0
I am trying to flash everything including my kernel and modem back to stock without the use of a USB cable
Sent from my SGH-I897 using XDA App
Search jh7 ota design gears posted it a while back. Just must disable all lag fix before flash
ok so i found the file do i go into recovery and reinstall packages or choose zip file ?
With lag fix disabled
Select zip from sd, choose zip, jh7, confirm
Thank you man, helped out alot
Sent from my SGH-I897 using XDA App
Why bother flashing back to stock at all? Just flash the new Rom and save all the headaches having to screw with lagfix.
Sent from my ADR6300 using XDA App
A better option would be to borrow a friends computer for a minute and fix everything properly...
If I flash a new rom while using Andromeda instead of stock wouldn't that cause.problems on the phone because of the.files being.mixed.or something
Sent from my SGH-I897 using XDA App
mossination said:
If I flash a new rom while using Andromeda instead of stock wouldn't that cause.problems on the phone because of the.files being.mixed.or something
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
most of time it will NOT cause problem, although it is not recommended.
Oh lol well I already did it...went fine, but ill probably go back to stock the next time just to be safe
Sent from my SAMSUNG-SGH-I897 using XDA App
I cant seem to get CWM to go into recovery mode....i clicked both reboot into recovery and install zip from sd and they both only take me to the stock recovery...can anyone help ?
Sent from my SAMSUNG-SGH-I897 using XDA App
iamcombat said:
I cant seem to get CWM to go into recovery mode....i clicked both reboot into recovery and install zip from sd and they both only take me to the stock recovery...can anyone help ?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
doubleudoubleudoubleudotmultiuploaddotcom/1YX01GN2SN
rename this to update.zip
place on internal sd card
reboot into recovery
press reinstall packages
then reinstall packages again. should work for you.
Well since you only have 3 posts I think ill wait to see if anyone else chimes in...don't want to do anything to my phone that would brick it
Sent from my SAMSUNG-SGH-I897 using XDA App
iamcombat said:
Well since you only have 3 posts I think ill wait to see if anyone else chimes in...don't want to do anything to my phone that would brick it
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Better safe than sorry, I just started contributing after quite some time now so I do not blame you one bit.
However...
That link is the CWM recovery for 2e bootloaders.
What ROM are you using?
You can always get ODIN 1.82 and flash an optimized kernel like hardcore's speedmod K9A which already has CWM.
EDIT: haha or you could just ODIN one-click to stock, root, and go CW Rom manager and from there flash recovery. I know that will work 100%, but that link is just a shortcut through all that nonsense.
Just flash clockworkmod recovery.
I had this problem the other day when I was trying to flash a new rom. I tried flashing CWM many times to no avail.
Like one of the previous repliers said, I flashed the speedmod kernel which had CWM already. The kernel can be found here.
Use Odin to flash it. After that, i could boot manually to CWM, but when i tried to boot to it through rom manager i was pushed to the stock recovery. In that case, I simply flashed my rom manually with CWM.
Theres also a good video on this for the i9000 which worked for me:http://www.youtube.com/watch?v=Q7xV0yE9ZcA
Hope this helps.
I'm trying to install clockwork mod on the wifes captivate. Unlike mine, she doesn't want a custom rom, actually she doesn't want me messing with it at all lol! Anyway it's rooted and I ran the 3e recovery fix script for Froyo as her's is 2.2.
So I install ROM Manager to install cwm, select Captivate and it says not supported on your device, manually install a recovery first and run again. Ok so where does one get a cwm file to manually install? I looked on the clockwork site and it has rom & recovery files listed but unknown if that's it and if it's even compatible with 2.2? Anyone have a clue on this? I've search multiple threads and haven't found one with this particular issue.
Search for "update.zip"
You need a clockwork enabled kernel. Then RomManager will be able to install CW.
Sent from my SAMSUNG-SGH-I897 using XDA App
98XJ said:
You need a clockwork enabled kernel. Then RomManager will be able to install CW.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
This is wrong.
To OP don't waste your time with Rom Manager. Flash a kernel with cwm baked in it (any i897 2.2 kernel should work) or as mrhaley30705 said update.zip.
prbassplayer said:
This is wrong.
To OP don't waste your time with Rom Manager. Flash a kernel with cwm baked in it (any i897 2.2 kernel should work) or as mrhaley30705 said update.zip.
Click to expand...
Click to collapse
what he said. flash any custom kernel, it has cwm built in. or do the update.zip method and make sure NEVER delete the file!!!!!!
but go with a custom kernel the have TONES of other cool options added. find one that is odin flashable and odin flash it...
here...
Odin3v1.85.zip
Onix kernel v2.0.5 made for android 2.2 search the forum for its thread to find all its options
boot phone into download mode (search)
plug in to computer
open odin
load the kernel into the PDA box.
press start
prbassplayer said:
This is wrong.
To OP don't waste your time with Rom Manager. Flash a kernel with cwm baked in it (any i897 2.2 kernel should work) or as mrhaley30705 said update.zip.
Click to expand...
Click to collapse
Curious how my statement is wrong? He asked why rom manager would not install clockwork and I told him. I said he needed a cwm compatible kernel, and you just repeated what I said except not to use rom manager?
Sent from my SAMSUNG-SGH-I897 using XDA App
98XJ said:
Curious how my statement is wrong? He asked why rom manager would not install clockwork and I told him. I said he needed a cwm compatible kernel, and you just repeated what I said except not to use rom manager?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
there is no CWM compatible kernel. all custom kernels have CWM baked in. ROM manager is useless
^That's why its wrong.
Ah ok, roger that. I fully understand it now. Thanks.
Sent from my SAMSUNG-SGH-I897 using XDA App
I rooted the phone, install rom manager, flash cwm recovery, then when i start recovery mode i don’t have install packages.Don’t know why, nevermind i install custom kernel and in there cwm recovery already.
szika87 said:
I rooted the phone, install rom manager, flash cwm recovery, then when i start recovery mode i don’t have install packages.Don’t know why, nevermind i install custom kernel and in there cwm recovery already.
Click to expand...
Click to collapse
holy christ. did you read this thread before replying to it?
Hey guys, I'm helping a friend out with his bricked captivate, just wondering, is there a Odin .tar I can use to get him; 1 back to good health on any ROM; 2 have a stable custom recovery. Ty. Happy new years!
Sent from my SPH-D710 using xda premium
Read before posting...read the stickies....and you didnt mention what kind of brick....is it soft brick or hard brick...what kind of rom? Froyo or GB?
For all the odins for Stock roms and kernels
I decided to Odin a few of those, but, for whatever reason cwm recovery doesn't start up, goes to the 3e I try to reinstall packages, sends back signature errors.
Sent from my SPH-D710 using XDA App
Flash a kernel with CWM or find the modded 3e recovery fix.
Tried, both froyo and gingerbread with and without bootloader, with and without cwm also.
Sent from my SPH-D710 using XDA App
You are doing something wrong. If you use a kernel that has cwm baked it there is no 3e it goes to cwm.