I have installed jp6/jpm firmware from kies with a registry hack . now i have modified the firmware but i want to restore all . the solution is reinstall the firmware . i can do it???? i want to do this because a have to installl the doc_kalpik mod .
help me . thanks
Related
Guys i need some help . I was trying to fix the lag on my sgs and it's broken now . I have the dowloand screen . Iam just wondering which Firmware should i use . Iam sure that the phone uses Android 2.2 . And i want to flash the original Firmware i had However i cant enter my phone . So does any one know which firmware should i flash ?
Where are you located and which provider are you subscribed to?
http://samfirmware.com will have your stock firmware available. If it isn't obvious, someone here can help identify the right one after learning the above info. Registration is required but it's a free site.
I'm assuming that you know how to use Odin?
DrMilky said:
Guys i need some help . I was trying to fix the lag on my sgs and it's broken now . I have the dowloand screen . Iam just wondering which Firmware should i use . Iam sure that the phone uses Android 2.2 . And i want to flash the original Firmware i had However i cant enter my phone . So does any one know which firmware should i flash ?
Click to expand...
Click to collapse
I had the same problem yesterday.
I used Odin v3 1.7 and the JPU with the CSC, pit 512, the pda and the phone file.
hi guys pls help me i tried surf the net with no help
i have a Samsung galaxy s i9000 i rooted to 2.3.3 but
today i flash my phone back to singtel firmware JG4 and i plug my device to kie
it came out this error hw do i change my CSC back to singtel?
Uploaded with ImageShack.us
pls help thanks
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
diiiooon1989 said:
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
Click to expand...
Click to collapse
hi thanks for the reply but is this work for all country phone? cus mine is singapore
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
diiiooon1989 said:
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
Click to expand...
Click to collapse
hi bro i tried finding but with no luk
do u mind guide me with this
how to get xwjs3 with the boot loaders.>??
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
diiiooon1989 said:
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
Click to expand...
Click to collapse
hi bro thanks for the guide
but nw i have this issues
Uploaded with ImageShack.us
the reason i wanna flash back cus my phome home button not response-ing
): and my camera Len crack
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
JJEgan said:
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Click to expand...
Click to collapse
hi thanks for the guide but nw my phone hang at Galaxy S
GT-i9000
Samsung
logo Screen >.< and plus my Home button not working anymore
even i try up + power + home button to recovery mode
or down+ power + home button mode
also not working >.>"
myrddral said:
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
Click to expand...
Click to collapse
hi thanks for the guide but i think my phone is dead >.>
Possible fix flash stock 2.1 rom with repartition checked and pit 512 not a 2.3.3 rom
Via Odin .
jje
Sunday i send my phone to causeway point to repair my camera lens and button.. today they send my phone to my house Thumb up... i notice they change all the button, lens and the whole back case and i notice my firmware is i9000DXJPB is it the latest firmware?
Hi i own a galaxy s PLUS yes a 9001 but i was not sure where to post.
Anyway i wanted to update the firmware to 4.0 and i downloaded kies and updated through that. At 4% it blocked and dissconnected and i am now receiving the picture atached. I can't go into recovery mode only into downloading mode.
What can i do?
Thanks
Later edit : i found out that my phone is bricked, but even if i can restore it to 2.3.4 i want the new 4.0. How can i do that?
I don't have that version of phone but i supose u can recover the phone on the odin. U can try it
I have successfully unbricked it using odin but what is the latest version of android for the i9001? does anyone know?
We have a sticky for this: http://forum.xda-developers.com/showthread.php?t=1346245
Last version would be 2.3.6 XXKPU or XXKPS, as noted above a sticky!
Thanks unbrick solved, updated to 2.3.6.
hi
im new here and i got some problem
after i try to use lagfix aps my samsung wont start
i try re install frimeware , its done but still wont start
can anyone please help me
btw
if u can tell me the best rom to install
P1000 GSM AT&T hacked
I got the same problem any idea what to da plz
HI all,
I need help with my phone Samsung S Advanced i9070. When there is no signal my phone reboot's same is when i turn on airplane mode ON.
This problem doesn't happen when i have no sim card in my phone but when there is a SIM it keep's rebooting. I did a SIM change and it still happen's. I did Factory reset and hard reset and i have the standard ROM, 2.3.6 build GINGERBRED.XXLD3 Kernal 2.5.35.7 the phone is unlocked and not rooted any more.One more thing i noticed is that when i press power off it doesn't turn of it reboot's.
Any advice ?
Thank you v mutch.
flash stock rom via odin if that help
nyanyanyanyanyanyanyanyanyanyanyan
Can you link me any instruction's for this phone? I worked in odin on a galaxy ace but long ago. So i will need a tut for i9070 if you can provide it?
I have serched everywhere and i cant finde how to flash it and the flash files. I cant even tell what's the newest firmware.
Plz help.
Any one?
Curent version is PDA i9070xxld3 CSC i9070OXFLE1
I cant finde it any where... Plz i need help :/
You will find the stock firmware on samfirmware (I would recommend I9070XXLE2... ). Use Odin to do the reflashing.. Here there is an XDA index for I9070 :
http://forum.xda-developers.com/showthread.php?p=33032022&postcount=4
rooting I9070PXXLK2
Hi guys, I read this forum, and I need your help.....
is it possible to root this one please?
Phone: I9070PXXLK2
Android version 2.3.6
Baseband version I9070PXXLK2
Kernel version 2.6.35.7
Build number gingerbread.XXLK2
thanks a lot
What kind of phone is it?
Sent from my SGH-I317 using xda app-developers app