Database Develop

recomended method for arabic?

Hello, i have galaxy i9000 config:
PDA: I9000XWJM2
PHONE: I9000 XXJPK
CSC: I9000 OXXJM2
I need to know if i should flash with ODIN stock ROM or custom ROM (I9000_Model_Froyo_version)
I have adb and kies installled
Thank you.

Im not sure what your point is , but i once tried a custom ROM ( Darkys v 6.0 ) and it had no arabic support .. letters are there but they are not connected. So i flashed a stock Froyo rom middle eastern version.

moses992 said:
Im not sure what your point is , but i once tried a custom ROM ( Darkys v 6.0 ) and it had no arabic support .. letters are there but they are not connected. So i flashed a stock Froyo rom middle eastern version.
Click to expand...
Click to collapse
Well, is it safe to flash the froyo rom i mentioned to this phone? Also, how do i know if my model is european version. It says "GT-I9000" at the back of my box. One more thing, i cant enter recovery or download mode...am i doing it correctly?

http://forum.xda-developers.com/showthread.php?t=810686
Reading your pst you do not know what you are doing DO NOTHING until you have read the FAQS and understand .
Membership of the bricked SGS club if you dont is certain to follow .
jje

Well i fixed recovery mode via ODIN now i can enter recovery mode. ALso, i am researching galaxy phones since the past week and am quite familiar with the process. Its just that i need to know a couple of things:
1) It says "GT-I9000" at the back of my box does it mean i have the international version
2) I mentioned my phone config in my first post, can i safely install the I9000_Model_Froyo_version to it after rooting my phone with superoneclick and then running recovery?
Thanks and please answer

Just need to clear these 2 points, someone please help

[Q] Huge Problem - Please Help

Hi i own a galaxy s PLUS yes a 9001 but i was not sure where to post.
Anyway i wanted to update the firmware to 4.0 and i downloaded kies and updated through that. At 4% it blocked and dissconnected and i am now receiving the picture atached. I can't go into recovery mode only into downloading mode.
What can i do?
Thanks
Later edit : i found out that my phone is bricked, but even if i can restore it to 2.3.4 i want the new 4.0. How can i do that?

I don't have that version of phone but i supose u can recover the phone on the odin. U can try it

I have successfully unbricked it using odin but what is the latest version of android for the i9001? does anyone know?

We have a sticky for this: http://forum.xda-developers.com/showthread.php?t=1346245

Last version would be 2.3.6 XXKPU or XXKPS, as noted above a sticky!

Thanks unbrick solved, updated to 2.3.6.

[Q] Missing CSC after JB update

Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.

n2851991m said:
Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.
Click to expand...
Click to collapse
power off your device..
press volume up + home + power buttons at the same time..
you will boot to recovery mode..
use volume keys to navigate to wipe cache and restore factory data..
select yes by using power button..
phone will reboot and will take a while..
set up the phone again..
see if its successful..

That Does not work
jaycm1130 said:
power off your device..
press volume up + home + power buttons at the same time..
you will boot to recovery mode..
use volume keys to navigate to wipe cache and restore factory data..
select yes by using power button..
phone will reboot and will take a while..
set up the phone again..
see if its successful..
Click to expand...
Click to collapse
Thanks for your reply but I have searched this forum and tried almost all solutions here. I have tried this but it did not work.. Ill try again just in case but for now this does not work

n2851991m said:
Thanks for your reply but I have searched this forum and tried almost all solutions here. I have tried this but it did not work.. Ill try again just in case but for now this does not work
Click to expand...
Click to collapse
you may try to reinstall the firmware via odin..
try to reset via recovery before and after the flashing process just to make sure..

n2851991m said:
Hi guys, I recently upgraded my android from GB to 4.1.2 XXLQ4. everything else works fine other than my 3G. Have tried everything ( resetting to factory, calling Customer Care(Airtel) etc) then while looking for a solution stumbled on the code *#1234# which shows
PDA: I9070XXLQ4
Phone: I9070XXLQ4
CSC: Unknown
Would the 3G problem be solved by flashing a CSC ? If so which CSC should i flash ?? the one for my Original Indian FW from 2.3.6 or the one from the XXLQ4 rom ?? And can someone send me the CSC folder from either 2.3.6 INU or 4.1.2 XXLQ4 ???
If none of these work i am planning to restore the rom back to GB, Would that Work ??
Please help me.
Click to expand...
Click to collapse
me too having same problem.. dont know why..
but it does not causing any problem...
may be its because fw is not from our region..
Edit : in root file explorer in a file called CSCversion.txt it is written 9070SERLPY

ravijani said:
me too having same problem.. dont know why..
but it does not causing any problem...
may be its because fw is not from our region..
Edit : in root file explorer in a file called CSCversion.txt it is written 9070SERLPY
Click to expand...
Click to collapse
noop i am from india and my CSC is ok see image

singhdharmendra48 said:
noop i am from india and my CSC is ok see image
Click to expand...
Click to collapse
Can you send me the link from where you downloaded the XXLQB rom ?? ( SamFirmware roms dont have a seperate CSC)
and also can you please confirm if 3G is working ??

n2851991m said:
Can you send me the link from where you downloaded the XXLQB rom ?? ( SamFirmware roms dont have a seperate CSC)
and also can you please confirm if 3G is working ??
Click to expand...
Click to collapse
this link to download http://d-h.st/36o
and 3G working for me bcoz mostly my friends connect to me video call:good:

[URGENT] Flash wrong model firmware on phone

So I recently got a I9000 from a friend. It was on android 2.3.4 and it baseband was I9000ZSJZ, already rooted but had no CWM. I wanted to upgrade the OS to 2.3.6 and add the CWM to the phone but I could not found a thread in the Android Development that contain firmware. So I search the internet and ended up in the Galaxy S Captivate. The thread said if I had normal bootloader with I9000 logo I should flash the one with the AT&T bootloader. I thought those two were the same so I use Odin to flash the latest one with CWM. When it boot, my phone was very laggy, it has no Baseband, the back button turn into the home button and the home button does nothing. I don't see the signal bar and everytime I tried to plug my phone to PC it always automatically turn off. :crying: Can anyone know how to fix this problem??? I can still enter the CMW mode and download mode, and I have tried flashing another firmware with baseband I9000 but still no luck. Anyone can help???:crying:

Galaxy Y User said:
So I recently got a I9000 from a friend. It was on android 2.3.4 and it baseband was I9000ZSJZ, already rooted but had no CWM. I wanted to upgrade the OS to 2.3.6 and add the CWM to the phone but I could not found a thread in the Android Development that contain firmware. So I search the internet and ended up in the Galaxy S Captivate. The thread said if I had normal bootloader with I9000 logo I should flash the one with the AT&T bootloader. I thought those two were the same so I use Odin to flash the latest one with CWM. When it boot, my phone was very laggy, it has no Baseband, the back button turn into the home button and the home button does nothing. I don't see the signal bar and everytime I tried to plug my phone to PC it always automatically turn off. :crying: Can anyone know how to fix this problem??? I can still enter the CMW mode and download mode, and I have tried flashing another firmware with baseband I9000 but still no luck. Anyone can help???:crying:
Click to expand...
Click to collapse
If you can enter CWM that means there should not be such a big problem.
Just get the ROM for i9000 (make sure you don't have i9001) and flash it, but before that, wipe data/factory reset, wipe cache partition and go to advanced and delete dalvik cache.

keeekeeess said:
If you can enter CWM that means there should not be such a big problem.
Just get the ROM for i9000 (make sure you don't have i9001) and flash it, but before that, wipe data/factory reset, wipe cache partition and go to advanced and delete dalvik cache.
Click to expand...
Click to collapse
Thanks for the reply. After flashing vibrant bootloader before flashing the i9000 rom I was able to fix most of the problem but the Baseband number still gone and there was no network connection. Maybe because of region lock since I flash a Hong Kong region i9000 stock rom. Could anyone provide a Vietnam region firmware. Thanks in advance

Galaxy Y User said:
Thanks for the reply. After flashing vibrant bootloader before flashing the i9000 rom I was able to fix most of the problem but the Baseband number still gone and there was no network connection. Maybe because of region lock since I flash a Hong Kong region i9000 stock rom. Could anyone provide a Vietnam region firmware. Thanks in advance
Click to expand...
Click to collapse
Just flash CyanogenMod, it's better than any stock Android out there, plus you will have Android 4.4. Go to www.cyanogenmod.org and follow the instructions.
PS: Do you have Samsung Vibrant or Samsung Galaxy GT-i9000? Because if you have Galaxy S GT-i9000 and flash Samsung Vibrant software on it, it will just mess up with your phone. Althought they look the same, they have different harware inside.

keeekeeess said:
Just flash CyanogenMod, it's better than any stock Android out there, plus you will have Android 4.4. Go to www.cyanogenmod.org and follow the instructions.
PS: Do you have Samsung Vibrant or Samsung Galaxy GT-i9000? Because if you have Galaxy S GT-i9000 and flash Samsung Vibrant software on it, it will just mess up with your phone. Althought they look the same, they have different harware inside.
Click to expand...
Click to collapse
I'm not sure. I got it from a friend and when I flash the one for Samsung Captivate the Baseband turn to Unknown and cause many bug. After flashing Vibrant bootloader and a Hong Kong region stock rom I got from samsung-updates.com, most of the problem was fixed. So you are saying if I flash CM 9/10/11, my baseband will be back?

From what I know, the modem file is integrated in CM, so yes.
If you want a HK baseband, you can flash it separately. Basebands are independent from ROM, but always flash ROM made specifically for your phone model.

keeekeeess said:
From what I know, the modem file is integrated in CM, so yes.
If you want a HK baseband, you can flash it separately. Basebands are independent from ROM, but always flash ROM made specifically for your phone model.
Click to expand...
Click to collapse
I thought each phone have their individual baseband integrate in them and flashing rom have baseband integrate in them doesn't change your baseband. I have already flash to different CM rom on my phone (ICS) and my baseband is still unknown. Do you have any other suggestion?

Galaxy Y User said:
I thought each phone have their individual baseband integrate in them and flashing rom have baseband integrate in them doesn't change your baseband. I have already flash to different CM rom on my phone (ICS) and my baseband is still unknown. Do you have any other suggestion?
Click to expand...
Click to collapse
First determine your device model by checking its IMEI ( written under battery) look under "Be Sure First" in [Tutorial] How to Unbrick, Flash, Downgrade, Root, Update i9000 from Froyo to Kit Kat
when you are sure its i9000 than use the unbricking guide or read How to Solve EFS problems, if its not i9000 search under "Find your device" search engine on top and use that guide and forum.
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
First determine your device model by checking its IMEI ( written under battery) look under "Be Sure First" in [Tutorial] How to Unbrick, Flash, Downgrade, Root, Update i9000 from Froyo to Kit Kat
when you are sure its i9000 than use the unbricking guide or read How to Solve EFS problems, if its not i9000 search under "Find your device" search engine on top and use that guide and forum.
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
When I first receive the phone, I check the model in the About phone and its model was I9000 and using something call lidroid part/rom, but when I check the IMEI using the link you given, it was a SHW-M110S. So what should I do now???

Galaxy Y User said:
When I first receive the phone, I check the model in the About phone and its model was I9000 and using something call lidroid part/rom, but when I check the IMEI using the link you given, it was a SHW-M110S. So what should I do now???
Click to expand...
Click to collapse
SO, its a KOrean Galaxy S and you cannot use anything meant for i9000 on it, and you were scammed into believing it was an i9000 when you boughht it.
read this For Korean Galaxy S
Exclusively for M110S Galaxy S PIT STOP
i9000 or M110S scam exposed
How to Flash and UNBRICK Samsung Anycall Galaxy S ( SHW M110S )
Unbricking the Korean Galaxy S [SHW M110S]
download the repair kit in the unbricking guide and follow the instructions to get your phone working as an SHW M110S
Check this out! Links to useful Guides and " Banned " Documentaries ​

Galaxy Y User said:
So I recently got a I9000 from a friend. It was on android 2.3.4 and it baseband was I9000ZSJZ, already rooted but had no CWM. I wanted to upgrade the OS to 2.3.6 and add the CWM to the phone but I could not found a thread in the Android Development that contain firmware. So I search the internet and ended up in the Galaxy S Captivate. The thread said if I had normal bootloader with I9000 logo I should flash the one with the AT&T bootloader. I thought those two were the same so I use Odin to flash the latest one with CWM. When it boot, my phone was very laggy, it has no Baseband, the back button turn into the home button and the home button does nothing. I don't see the signal bar and everytime I tried to plug my phone to PC it always automatically turn off. :crying: Can anyone know how to fix this problem??? I can still enter the CMW mode and download mode, and I have tried flashing another firmware with baseband I9000 but still no luck. Anyone can help???:crying:
Click to expand...
Click to collapse
I had exactly the same problem. I could not get into download mode, so I bought a "Samsumg USB Jig" from ebay (1.79€). Remove battery, connect jig, install battery and the phone will go into download mode. Then use Odin to flash the correct firmware, including the bootloader.

Question and HELP, soft brick? and find stock rom

hi, i know my english is really bad at least...
i have this problem, my s3 mini comes into a bootloop aftr i flashed to returm from cm11 to stock rom and stock recovery.
now i suck in bootloop, i tried Parami8190 to revive but not lucky, i flashed again w odin 3.07 and wipe using ODIN new kernel and new room pre-rooted but no luck again...
someone tell me i need to know my original firmware but no luck, additionaly i was changing my baseband because my phone always says "no service" with cyanogenmod11.
how to know my firmware and operator? because i buyed this in amazon and i cant remenber.
or any web to consult my phone operator originally and country like iphone does? or idk HELP please guys im really sadly about this.
Ty
PD: im using it in Movistar, Venezuela. ty.

have you tried looking here
http://www.sammobile.com/firmwares/
find your firmware, d/l & flash via odin.....do full wipe before
good luck