[Q] Huge Problem - Please Help - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi i own a galaxy s PLUS yes a 9001 but i was not sure where to post.
Anyway i wanted to update the firmware to 4.0 and i downloaded kies and updated through that. At 4% it blocked and dissconnected and i am now receiving the picture atached. I can't go into recovery mode only into downloading mode.
What can i do?
Thanks
Later edit : i found out that my phone is bricked, but even if i can restore it to 2.3.4 i want the new 4.0. How can i do that?

I don't have that version of phone but i supose u can recover the phone on the odin. U can try it

I have successfully unbricked it using odin but what is the latest version of android for the i9001? does anyone know?

We have a sticky for this: http://forum.xda-developers.com/showthread.php?t=1346245

Last version would be 2.3.6 XXKPU or XXKPS, as noted above a sticky!

Thanks unbrick solved, updated to 2.3.6.

Related

[Q] Kies says there is a firmware update, is this the way back to original firmware?

Hi.
My first thread here, thanks for all the work you folks putting in making our Galaxy a greate phone. Hope I dont start a thread that are already existing.
Yesterday I falshed my phone with the I9000XWJM2 firmware and experiensed something strange in Kies afterwards.
It told me that there was new firmware I could choose to install!! I havent experienced that before.
Is this a way to get back to the original firmware? I know from the FAQ that there are no way to do it, but what happens if I get KIES to install firmware?
Best regards,
Jens
hey jens are you sure kies offers you firmware ? or just update for KIES i mean update Kies destop software ?
It only shows up after I installed I9000XWJM2 and before SAMSET 1.8, as far as I have seen so far. Will try again tonight when im back from work.
I can see that other people in here is talking about new KIES version. I will check tonight whatever its firmware or KIES that it want to update.
jensk said:
Hi.
My first thread here, thanks for all the work you folks putting in making our Galaxy a greate phone. Hope I dont start a thread that are already existing.
Yesterday I falshed my phone with the I9000XWJM2 firmware and experiensed something strange in Kies afterwards.
It told me that there was new firmware I could choose to install!! I havent experienced that before.
Is this a way to get back to the original firmware? I know from the FAQ that there are no way to do it, but what happens if I get KIES to install firmware?
Best regards,
Jens
Click to expand...
Click to collapse
its kies update,not galaxy s.i have already updated mine. from v1.5.1.10071 to 1.5.1.10074.
I have checked now.
Its KIES that have been updated, sorry

[Q] haveing problem for installing 3button download mode to use ODIN3

hello gyes!
i'm in great jeopardy...............
spent 2 days searching-> only 1 thing & its-> how to install a 3 button download mode on my sgs gt i9000.
I crashed my froyo 2.2.1 while debranding it.so i revert it back to eclair 2.1 but now kies won't recognise it for updates
i downloaded every thing i needed-> .pit file\gingerbread file\odin3\the adb a k a sdk what ever.(sdk manager)....even played in commandpromt.1 click root\unroot. decorder update with kies
but all seems worthless unless i don't get the 3 button download mode
i tried all XDA forums-tutorials.....but nothing to come in way of sucess.
so please give some suggestions & links that could save my babe
First of all it's in wrong section...
Second head over to general section.. There is complete guide of how to install 3 button combo etc.. Or use the search button
It happed happen to me once couldn't get the 3 button working so I download it from xda than flashed with bootloader checked via odin1.7
Hope this helps
Cheers
thanx man your advice really helped me......
i did as you adviced me
my phone went in download mode then i flashed using odin3 v1.8)
everthing went fine but there is problem- when i connect my phone to kies->it says:the version of this device cannot be updated
why is that i downloaded original samsung gingerbread OS for my i9000?
pit file 512
OS GT_I9000_XXJVK_XXJVK_OXAJVK
so whats up....?
please guide me more
You CAN'T upgrade a rooted phone from KIES... It's ONLY for LOCAL provider/phones and WHEN the LOCAL provider have an update THEN AND ONLY THEN the KIES will upgrade an UNROOTED CLEAN UNTOUCHED phone... Besides the JVK is the latest UNOFICIAL - official ROM as the JVB... PLEASE READ before you post and go to the right section, you make people think you are a lazy leecher and not worth help... And they are RIGHT!!!

[Q] Galaxy Note Update problem (India)

Hi guys.
I am unable to update my Galaxy Note by any means. Kies says that my device does not support software upgrading via Kies. When I tried OTA, I get a message saying Failed to update firmware.
This is not the ICS upgrade. This is a 72.29 MB upgrade rolled out months back. I have tried everything with Kies. It refuses to budge.
I have browsed several threads but none provided me with a working solution. I read that sometimes the firmware is flashed when you give the phone for repairing. I DID give my phone at the service centre once and was handed back a completely fresh install of the software.
I am very noob-y in matters related to kernels and CSC and odin. A detailed answer would be really helpful. Your patience and effort is appreciated.
Please help guys. Thanks!
You can update to the latest version of ICS for India using the PC Odin. Thats the fastest way of upgrading. Follow the instruction that Dr Ketan has for upgrading to the Indian Rom of ICS.
hope this helps.
download the stock ics from samfirmwares.com
download pc odin
enable usb debugging
unknown sources
open pc odin
just open pda and browse to the tar file and do not change any other options and flash
profest said:
Hi guys.
I am unable to update my Galaxy Note by any means. Kies says that my device does not support software upgrading via Kies. When I tried OTA, I get a message saying Failed to update firmware.
This is not the ICS upgrade. This is a 72.29 MB upgrade rolled out months back. I have tried everything with Kies. It refuses to budge.
I have browsed several threads but none provided me with a working solution. I read that sometimes the firmware is flashed when you give the phone for repairing. I DID give my phone at the service centre once and was handed back a completely fresh install of the software.
I am very noob-y in matters related to kernels and CSC and odin. A detailed answer would be really helpful. Your patience and effort is appreciated.
Please help guys. Thanks!
Click to expand...
Click to collapse
download indian ics and use pc odin to update..
see this Dr. Ketan's link http://forum.xda-developers.com/showthread.php?t=1667018
will wait for OTA update.. waited for such a longtime already!!
Karthikdoc - U dont have to wait for OTA update. It is already there.. Just keep refreshing .. I did a OTA update of Note to ICS almost a week ago .. and some even more earlier.
Profest - It would be good if you can go into
Settings --> About Phone
and provide us the Android version
Baseband version
Kernal version
Just want to make sure the samsung guys gave you a right flash and also to guide you in the right direction ..
Maybe factory reset will help.....
Afterall you will have to do it before upgrading to ICS.

i9070 Reboot help

HI all,
I need help with my phone Samsung S Advanced i9070. When there is no signal my phone reboot's same is when i turn on airplane mode ON.
This problem doesn't happen when i have no sim card in my phone but when there is a SIM it keep's rebooting. I did a SIM change and it still happen's. I did Factory reset and hard reset and i have the standard ROM, 2.3.6 build GINGERBRED.XXLD3 Kernal 2.5.35.7 the phone is unlocked and not rooted any more.One more thing i noticed is that when i press power off it doesn't turn of it reboot's.
Any advice ?
Thank you v mutch.
flash stock rom via odin if that help
nyanyanyanyanyanyanyanyanyanyanyan
Can you link me any instruction's for this phone? I worked in odin on a galaxy ace but long ago. So i will need a tut for i9070 if you can provide it?
I have serched everywhere and i cant finde how to flash it and the flash files. I cant even tell what's the newest firmware.
Plz help.
Any one?
Curent version is PDA i9070xxld3 CSC i9070OXFLE1
I cant finde it any where... Plz i need help :/
You will find the stock firmware on samfirmware (I would recommend I9070XXLE2... ). Use Odin to do the reflashing.. Here there is an XDA index for I9070 :
http://forum.xda-developers.com/showthread.php?p=33032022&postcount=4
rooting I9070PXXLK2
Hi guys, I read this forum, and I need your help.....
is it possible to root this one please?
Phone: I9070PXXLK2
Android version 2.3.6
Baseband version I9070PXXLK2
Kernel version 2.6.35.7
Build number gingerbread.XXLK2
thanks a lot
What kind of phone is it?
Sent from my SGH-I317 using xda app-developers app

[Q] Bricked Galaxy tab GT-P1000

Hey guys i tried to update the firmware on my GT-P1000, and managed to soft bricked it , its stuck in the loop. i cant find any stock firmware or anything all links i found are dead , have you guys got any ideas ?
originally i wanted to follow this http://www.ibtimes.co.uk/galaxytab7...ellybean-update-cyanogenmod101-nightly-466906
and update android to latest version :crying:
lowik2 said:
Hey guys i tried to update the firmware on my GT-P1000, and managed to soft bricked it , its stuck in the loop. i cant find any stock firmware or anything all links i found are dead , have you guys got any ideas ?
originally i wanted to follow this http://www.ibtimes.co.uk/galaxytab7...ellybean-update-cyanogenmod101-nightly-466906
and update android to latest version :crying:
Click to expand...
Click to collapse
Hello there im not shure if this will help you but if you can flash the 2.3.6 and then to the 4.1.2 and get that working it might be possible to flash to the 4.2.2 , without knowing for shure i think that might be some issues "jumping" too far at one time like going from 2.2 to 4.2.2 ( just an example ) ............ as you can read in my post about a different problem + boot loop in my post http://forum.xda-developers.com/galaxy-tab/help/galaxy-tab-gt-p1000-black-screen-lights-t2900334 i "think" i might have solved my boot loop problem when trying to flash 2.3.6 by flashing the dbdata file before alowing the tablet to boot into android as showed in the VIO vidoe on youtube.... so what im trying to say is......
try to get 2.3.6 working on your tablet by following.................... https://www.youtube.com/watch?v=BuAgACCWdw8
and then root it https://www.youtube.com/watch?v=9qrwDDd205o
and then flashing to 4.1.2.......... https://www.youtube.com/watch?v=eOnhvCcJUKw
and when you have 4.1.2 working you might try to flash to 4.2.2 ?
i hope this helps you. ( there might be a simpler sollution to boot loop problem but dont know for shure ) )

Categories

Resources