Hey guys i tried to update the firmware on my GT-P1000, and managed to soft bricked it , its stuck in the loop. i cant find any stock firmware or anything all links i found are dead , have you guys got any ideas ?
originally i wanted to follow this http://www.ibtimes.co.uk/galaxytab7...ellybean-update-cyanogenmod101-nightly-466906
and update android to latest version :crying:
lowik2 said:
Hey guys i tried to update the firmware on my GT-P1000, and managed to soft bricked it , its stuck in the loop. i cant find any stock firmware or anything all links i found are dead , have you guys got any ideas ?
originally i wanted to follow this http://www.ibtimes.co.uk/galaxytab7...ellybean-update-cyanogenmod101-nightly-466906
and update android to latest version :crying:
Click to expand...
Click to collapse
Hello there im not shure if this will help you but if you can flash the 2.3.6 and then to the 4.1.2 and get that working it might be possible to flash to the 4.2.2 , without knowing for shure i think that might be some issues "jumping" too far at one time like going from 2.2 to 4.2.2 ( just an example ) ............ as you can read in my post about a different problem + boot loop in my post http://forum.xda-developers.com/galaxy-tab/help/galaxy-tab-gt-p1000-black-screen-lights-t2900334 i "think" i might have solved my boot loop problem when trying to flash 2.3.6 by flashing the dbdata file before alowing the tablet to boot into android as showed in the VIO vidoe on youtube.... so what im trying to say is......
try to get 2.3.6 working on your tablet by following.................... https://www.youtube.com/watch?v=BuAgACCWdw8
and then root it https://www.youtube.com/watch?v=9qrwDDd205o
and then flashing to 4.1.2.......... https://www.youtube.com/watch?v=eOnhvCcJUKw
and when you have 4.1.2 working you might try to flash to 4.2.2 ?
i hope this helps you. ( there might be a simpler sollution to boot loop problem but dont know for shure ) )
Related
Hi i own a galaxy s PLUS yes a 9001 but i was not sure where to post.
Anyway i wanted to update the firmware to 4.0 and i downloaded kies and updated through that. At 4% it blocked and dissconnected and i am now receiving the picture atached. I can't go into recovery mode only into downloading mode.
What can i do?
Thanks
Later edit : i found out that my phone is bricked, but even if i can restore it to 2.3.4 i want the new 4.0. How can i do that?
I don't have that version of phone but i supose u can recover the phone on the odin. U can try it
I have successfully unbricked it using odin but what is the latest version of android for the i9001? does anyone know?
We have a sticky for this: http://forum.xda-developers.com/showthread.php?t=1346245
Last version would be 2.3.6 XXKPU or XXKPS, as noted above a sticky!
Thanks unbrick solved, updated to 2.3.6.
Hello,
I hope you guys can help me
i live in The Netherlands just received my Note yesterday
i was first on 2.3.5
for some reason he didnt upgrade to 2.3.6
then i rooted my phone via dr.ketan's way and did clockworkmod
i installed rocketrom so i was now on 2.3.6 but i had a really bad battrydrain
so i wanted back to stock just how i received my phone
so i downloaded Odin3-v1.85 choose a stock rom from the Netherlands 2.3.6
i check pda then inserted the md5.tar but know it wont boot
i only see the Samsung logo all the time i don't know what to do anymore
i hate myself for doing such things always
always get myself in a mess
I hope you guys can help me
sorry for my bad English
Thank You!
try flashing it again
Taijutzu said:
Hello,
I hope you guys can help me
i live in The Netherlands just received my Note yesterday
i was first on 2.3.5
for some reason he didnt upgrade to 2.3.6
then i rooted my phone via dr.ketan's way and did clockworkmod
i installed rocketrom so i was now on 2.3.6 but i had a really bad battrydrain
so i wanted back to stock just how i received my phone
so i downloaded Odin3-v1.85 choose a stock rom from the Netherlands 2.3.6
i check pda then inserted the md5.tar but know it wont boot
i only see the Samsung logo all the time i don't know what to do anymore
i hate myself for doing such things always
always get myself in a mess
I hope you guys can help me
sorry for my bad English
Thank You!
Click to expand...
Click to collapse
Exactly Same thing happen to my device while Flashing Stock ROM. i just restarted in Recovery mode then did a Wipe / Factory reset. and wipe cache. then restarted . everything went fine.
Hi Everyone,
Recently, I got a Galaxy S I9000M from a friend. The phone was running 2.1 firmware when I got it. There were two updates for the phone from kies(2.2 & Gingerbread) I updated the phone to 2.2 froyo from kies. later, kies stopped to recognise my phone. so I thought to root my phone and did using rootme 2.2. I don`t know if the phone was rooted but I could see superuser. Then I flashed with some ROM and messed my phone. on booting the phone stuck on blinking on galaxy s logo and will not start. After flashing few more firmware, I am stuck on brick picture on phone. I cannot go to recovery also but I can go to download mode. I am guessing that flashing the stock 2.1 may help to start the device. I have searched everywhere to find the stock 2.1 for i9000M but cannot find because many links are dead and samfirmware.com does not show me the old firmware. By the way, I have downloaded stock 2.3.3 (samsung-updates.com) which I don`t know will work.
Please help me to find the stock firmware or any other way though which I can solve my problem. Tell me which files do I need and how can I flash.
Thanking everyone in anticipation.
Edit: I found stock froyo 2.2 files and phone is working again
Hi All
I was playing around with custom roms on my phone and stupidly managed to brick the phone.
I accidentally clicked the option repartition in ODIN when flashing a ROM...... I think this is how I bricked it.
I want to get it back to the official Optus 2.3.6 I9000XWJW6_I9000OPSJV6_OPS, I downloaded this official ROM from here (SamMobile)
If I try to install the above rom the phone just gets stuck on the start-up screen. (I notice errors in the phones recovery when trying to install the official firmware)
Or if anyone can get me back to a working phone with working firmware that would be awesome.
Any help would be much appreciated...
Thanks!
Found the solution!
This worked, thank god.
snappybytes.blogspot.com.au/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Hi,
I have previously had GT-7000 (Without B) which now is a just bricked phone (hard). It had Philz-cwm6 for safe kernel and custom ROM which I really liked and only used for 2 months until the phone totally died.
Now I have another Galaxy Note 1 with me but this time,, It's GT-7000B (No it is not LTE model, its a Austrailian model for Vodafone and other austrailian network) and it hasn't been rooted and on 4.1.2.
I thought I really want to flash the phone with the same kernel and same custom ROM that I used on my previous phone on this new GN.
However, I am having a lot of trouble even trying to flashing the kernel on this phone.
Tried to flash through stock kernel (3e) and gives me error 7 stating that the process aborted since the phone is not GT-7000.
I have searched on the google and this website to try to find the ways to do it but unfortunately I couldn't find any information that could helped me with this issue.
Thank you in advance and look forward to hear anyone's help
I sorted out this problem by myself.
thanks
SOLUTION
korerotaro said:
I sorted out this problem by myself.
thanks
Click to expand...
Click to collapse
can u brief me the solution .. i am having the same issue . thanx