Related
I flashed the 1.4 recovery image from terminal emu.
Here is what I'm running.
CM 4.1.8
radio 2.22.19.26
Now when I hold home and end it shows the G1 logo then goes black shows the G1 logo again then black then nothing happens. no text or anything. The lights on the keys do light up but nothing happens.
Any insight?
reflash the recovery image. do you have adb installed?
I have a similar problem. I was using EnochXTra, and went straight to the part where you flash the "1.6 recovery image". I figured it would wipe the theme off, and then I could flash Cyanogen's 4.1.99. But now when I hold "home", I get a screen that has (description) "a triangle with a "!" in the center of it, facing a phone laying down" (end description). If I don't hold home, I get to where it says "Android" and it starts cycling (not rebooting, just the word "android"'s animation freezing, flickering off for a split second, then resuming). in both situations I have to pull the battery to get out of them.
Anyone know where I failed and how badly?
Tactical Fart said:
I have a similar problem. I was using EnochXTra, and went straight to the part where you flash the "1.6 recovery image". I figured it would wipe the theme off, and then I could flash Cyanogen's 4.1.99. But now when I hold "home", I get a screen that has (description) "a triangle with a "!" in the center of it, facing a phone laying down" (end description). If I don't hold home, I get to where it says "Android" and it starts cycling (not rebooting, just the word "android"'s animation freezing, flickering off for a split second, then resuming). in both situations I have to pull the battery to get out of them.
Anyone know where I failed and how badly?
Click to expand...
Click to collapse
that would be the radio updating.......
what phone region do you have? can you access bootloader? Cam + power
to op, the recovery didnt flash right. do it again
Cam + Power? Yeah, I can. It's the only thing i can reach.
I was using EnochXTra, and went straight to the part where you flash the "1.6 recovery image"
Click to expand...
Click to collapse
how exactly did you flash this "1.6 recovery image"?
I changed the name to "update.zip", rebooted while holding "home", then applied "update.zip from sdcard".
... I screwed up big time didn't I?
No that's the correct way to do it. Just making sure you didn't flash_image recovery ........zip in the terminal. Since you can reach the bootloader (Camera+Power) follow THIS
K, I managed to flash the update.zip, and now my phone works. I renamed cyanogen's rom to update.zip, but under the recovery mode menu (the one with the triangle and "!"), I don't get a list of options, but when I go "alt+S" (like I did earlier) it "tries" to flash but gives up less than a second later. Also alt+W wipes and reboots.
While it's working, I installed cyanogen's updater, but when it tries to get root, nothing happens. Did I just unroot my phone?
Do you have USB Debugging enabled?
Fingerlickin said:
Do you have USB Debugging enabled?
Click to expand...
Click to collapse
Yes. When I checked, it was enabled by default.
hmmmm. and what rom are you running?
http://developer.htc.com/adp.html
I used the recovery image as per cyanogen's instructions for version 4.1.99.
ah ok, have you installed 4.1.99 yet? ADP1 handles root requests a little differently.
No. While at the recovery screen (with the triangle and "!"), i have the update for cyanogen at the / of the sdcard named update.zip (like I have for all roms I've used), but alt+S won't do anything.
can you do this?
1) Goto the market and download "Telnet"
2) Open Telnet and connect to localhost : 23
3) type su (enter)
4) type flash_image recovery cm-recovery-1.4.img (enter)
5) Press the home button
Fingerlickin said:
2) Open Telnet and connect to localhost : 23
Click to expand...
Click to collapse
"Connection Refused."
boot using camera+power
give us the details shown. specifically radio and spl versions
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.26I
Apr 20 2009, 15:30:43
Click to expand...
Click to collapse
I don't see anything that says "spl".
look at the sticky for fastboot, you need to use fastboot to flash cm-recovery-1.4.img
hi,
my tattoo can not enter recovery mode after pressing [END]+[HOME], it's only show the "!" sign in a triangle and phone icon.. but it succesfully enter HBOOT mode my presing [END]+[VOLUME DOWN]
it has been rooted with m6..
can anybody explain what happen with my tattoo?
many thanks!
Did you flash custom recovery image? Try this one:
http://forum.xda-developers.com/showthread.php?t=649276
coolbits.. nope, my tattoo never been flash before, it just been rooted with m6 method.. so, is it normal if it's not able to go to recovery mode by pressing [END]+[HOME] when my tattoo has not been flash before?
thanks
If you didn't flash the custom recovery image, yes it's normal!
can you see something thar not exist???.....drugs are not included in the question....xD
sorry for my stupidity... but i wouldn't ask any question if i knew the answer..
from memory the "!" sign in a triangle and phone icon
is the default splash screen and you just have to press some other button for menu
alt + L I think ... ill edit if I have time to dig it up running late for work and have my own flash issue atm
edit unsure about an tatto
3.A yellow or red triangle with an exclamation mark (!) will be displayed on phone screen. Press and hold the Volume Up and Camera or Power buttons simultaneously to bring out the system recovery menu.
that might work
Triangle
If the triangle is showing, then you didn't sucessfully ported recovery img.
I cant enter recovery mode.I used cm6 on tattoo and now i want to go on 1.6 rom but i cant enter recovery mode.What to do
sasans said:
I cant enter recovery mode.I used cm6 on tattoo and now i want to go on 1.6 rom but i cant enter recovery mode.What to do
Click to expand...
Click to collapse
Not dev. related question..
BTW I think you should install ROM Manager (with Clockwork recovery)
Then use the nandroid backup or flash another update.zip.
To rollback to original 1.6 use the WWE RUU
I cant rollback to original 1.6 becouse its says error when i tray
sasans said:
I cant rollback to original 1.6 becouse its says error when i tray
Click to expand...
Click to collapse
did you try with the goldcard?
I dont have goldcard :-(
sasans said:
I dont have goldcard :-(
Click to expand...
Click to collapse
if the phone boots, create it..
Hi, really hoping someone can help me here.
I have a Nexus One that was running a stock Android 2.2 FRF91, and I want to go to a CM ROM.
I've been following the wiki guide here.
I have completed the "Unlocking the Bootloader" section.
I have chosen to use Amon_Ra's recovery. When I ran the command this is what I got back in the command window, so it looks to have been successful.
C:\AndroidSDK\tools>fastboot flash recovery recovery.img
sending 'recovery' (3962 KB)... OKAY [ 0.764s]
writing 'recovery'... OKAY [ 1.576s]
finished. total time: 2.340s
I was then able to update the Radio. Now I'm stuck trying to flash the ROM.
This is exactly what I do leading up to my current problem.
Switch the phone on holding down the trackball.
Select Bootloader option.
Select Recovery.
At this point it reboots, but I am left with a little green android man and a white triangle with an orange ! mark.
HELP! Thank you.
edesignuk said:
This is exactly what I do leading up to my current problem.
Switch the phone on holding down the trackball.
Select Bootloader option.
Select Recovery.
At this point it reboots, but I am left with a little green android man and a white triangle with an orange ! mark.
HELP! Thank you.
Click to expand...
Click to collapse
Simple:
After install recovery reboot holding VOL DOWN and enter first time in Amon-RA.
Now "flash update.zip"----->CyanogenMod6-RC2 (it contains root etc.)
If you reboot and retry to enter in recovery you'll have little android in triangle...that's because ota FRF91 has a script in system/etc/install-recovery.sh that at every boot change at default recovery. If you have root you can delete that file, but if you haven't you have to do that:
1. install recovery
2. at reboot enter directly in recovery (at first time)
3. install cyano rom
4. reboot
5. now you can flash amon-ra recovery and it is forever
Hello, and thanks for your quick reply!
Still problems though...I'll note exactly what I'm doing.
Phone is not connected to USB and is switched off.
Hold down VOL DOWN and Power button.
Press VOL DOWN and then press in the Power button to select RECOVERY.
Now the phone reboots and I'm back to the little green man with the triangle and orange ! mark.
:-S
edesignuk said:
Hello, and thanks for your quick reply!
Still problems though...I'll note exactly what I'm doing.
Phone is not connected to USB and is switched off.
Hold down VOL DOWN and Power button.
Press VOL DOWN and then press in the Power button to select RECOVERY.
Now the phone reboots and I'm back to the little green man with the triangle and orange ! mark.
:-S
Click to expand...
Click to collapse
So..
Enter in fastboot and reload recovery with fastboot, at the first reboot enter in recovery....first time you'll enter in AMon-RA and do what i wrote up.
Sorry, so just to be clear...
Are these the steps to follow?
Connect phone to PC.
Power on phone holding down the power button
From the PC running the command fastboot flash recovery recovery.img
At first reboot after this hold down VOL DOWN to flash CM update.zip
Is that correct?
Thanks.
edesignuk said:
Sorry, so just to be clear...
Are these the steps to follow?
Connect phone to PC.
Power on phone holding down the power button
From the PC running the command fastboot flash recovery recovery.img
At first reboot after this hold down VOL DOWN to flash CM update.zip
Is that correct?
Thanks.
Click to expand...
Click to collapse
No (IMPORTANT (not reboot completely):
1. connect phone and POWER UP holdin VOL DOWN
2. enter in fastboot and reload amon-ra recovery first
3. at reboot (after you have loaded amon-ra) VOL DOWN and choose recovery with POWER button----------->AMOn-RA
...............understood?
OK, so I'm doing what you say.
I have the phone connected to the PC.
I turn it on holding the VOL DOWN button.
I get to a white screen with 3 green android men and 4 options (FASTBOOT, RECOVERY, CLEAR STORAGE, and SIMLOCK).
From a command prompt on the PC I try to run fastboot flash recovery recovery.img, but this just sits there saying ( waiting for device ).
If I try to enter the RECOVERY mode it reboots back the point point where I was stuck to begin with.
I really appreciate your help, please stick with me! Thanks.
WAIT! Think I've got it working...will report back shortly.
edesignuk said:
OK, so I'm doing what you say.
I have the phone connected to the PC.
I turn it on holding the VOL DOWN button.
I get to a white screen with 3 green android men and 4 options (FASTBOOT, RECOVERY, CLEAR STORAGE, and SIMLOCK).
From a command prompt on the PC I try to run fastboot flash recovery recovery.img, but this just sits there saying ( waiting for device ).
If I try to enter the RECOVERY mode it reboots back the point point where I was stuck to begin with.
I really appreciate your help, please stick with me! Thanks.
Click to expand...
Click to collapse
When you are in blank screen you have to see fastboot in red.
In prompt have you written: fastboot devices?
It gives you such a "HTC 123455666..." If yes you have to load recovery like first time...after you have to choose recovery in blank screen if possible directly with POWER BUTTON...i hope..
Hurrah! Think it looks to be complete now.
Thank you so much for your help HTCDevil.
edesignuk said:
Hurrah! Think it looks to be complete now.
Thank you so much for your help HTCDevil.
Click to expand...
Click to collapse
Just a little help
i cant get into my recovery, i have a recovery image, im on cm7 rc3, i tried flashing to the stable using rom manager, but i get stuck on the htc screen, i take out the battery, try flashing the normal way, and im still stuck on the htc screen, what can i do? i deleted gapps off my sd card and put the new one in, but i didnt flash right away, i tried flashing cm7 stable first, dont know if thats what caused the issue. thanks for your help
It puzzles me you say you can't get into recovery but you posted you tried flashing the rom threw rom manger and the " normal " way. I'm thinking the normal way is from your recovery. If you can get into recovery try this. Make a nandroid of your current rom. Then do a full wipe. As in data,cache & dev-cache. Then flash the rom and see if it boots up. If it does. Reboot back into recovery and flash the gapps. then reboot. See if that works. If you cant actually get into recovery just post back and either myself or fellow xda members will try and help you out.
Yea its Me Again With The
Modified Hero
i cant get into recovery at all, what i wrote was i tried flashing the cm7 stable from rom manager first, but it got stuck on the htc screen, then tried the normal way which is holding down the red button and clicking on the reboot-recovery option, and still got stuck on the htc screen. these are the only two ways i know to get into recovery, and holding down the volume down button and the power button, which didnt work for me either, basically i cant get into recovery. i thought it was because i deleted my gapps and didnt flash the new gapps file as soon as i put it in my sd card,but im not sure if that is the reason.
With power off
To boot into recovery you
Press & hold the red power button & press & hold the home buttom untill you see your recovery. Or Peres & hold the power button then press and hold the volume down button. A white screen will appear. When you see the white screen press the home button and wait. Your recovery should appear. If you just deleted your gapps zip from your SD it would not effect your recovery at all. I think your just caught in a boot loop and your not booting into recovery the correct way. But I'm not sure.let me know if this works. What recovery are you using???
Yea its Me Again With The
Modified Hero
i tried what you said and im still get stuck on the htc screen, i saw the white screen and all but when i pressed the home button i got stuck at the htc screen, its the cm7 recovery clockworkmod
kozmo198 said:
i tried what you said and im still get stuck on the htc screen, i saw the white screen and all but when i pressed the home button i got stuck at the htc screen, its the cm7 recovery clockworkmod
Click to expand...
Click to collapse
Pull battery, replace battery.
BEFORE POWERING ON DEVICE, press and hold HOME key.
WHILE HOLDING HOME KEY, press and release power button.
WHEN HTC LOGO APPEARS, release HOME key.
You should now be in recovery.
jasonmaloney said:
Pull battery, replace battery.
BEFORE POWERING ON DEVICE, press and hold HOME key.
WHILE HOLDING HOME KEY, press and release power button.
WHEN HTC LOGO APPEARS, release HOME key.
You should now be in recovery.
Click to expand...
Click to collapse
same problem after trying this...still on htc screen x/
kozmo198 said:
same problem after trying this...still on htc screen x/
Click to expand...
Click to collapse
Are you able to boot normally? Or does that get stuck as well?
yeah i can get into cm7 past the logo and everything, i can run rc3, but i cant get into recovery at all trying everything in the past posts
kozmo198 said:
yeah i can get into cm7 past the logo and everything, i can run rc3, but i cant get into recovery at all trying everything in the past posts
Click to expand...
Click to collapse
Then just go into ROM Manager and re-flash the recovery.
ok thnks, ill hfto try where i can get wifi n the morning x.x
If I'm not mistaken can't you tell rom manger were to look for the recovery you want to flash?? If so and you have a copy of the recovery on your sd you can flash it.
Yea its Me Again With The
Modified Hero
jasonmaloney said:
Then just go into ROM Manager and re-flash the recovery.
Click to expand...
Click to collapse
how about if he had said no?
thats just straight up a creek right?
I am having the same problem...except I never actually got Cyanogen flashed. I rooted my phone. Installed SuperUser to fix permissions. Installed Rom Recovery and flashed the Clockworks Recovery. Then I backed up the Rom and when I went to boot into recovery to flash Cyanogen, I just get the white HTC screen. I get the same issue with manual recovery (holding down home and turning the power on). I can boot normally, but I can't restore my backup or use any other recovery features. Any ideas?
corey777 said:
I am having the same problem...except I never actually got Cyanogen flashed. I rooted my phone. Installed SuperUser to fix permissions. Installed Rom Recovery and flashed the Clockworks Recovery. Then I backed up the Rom and when I went to boot into recovery to flash Cyanogen, I just get the white HTC screen. I get the same issue with manual recovery (holding down home and turning the power on). I can boot normally, but I can't restore my backup or use any other recovery features. Any ideas?
Click to expand...
Click to collapse
Ok....I tried one more time using the Volume Down and Power, then selecting Home and for whatever reason it worked. So I cleared my cache and then I selected to installed zip from sdcard and selected the cyanogen zip file. I get E: Error in /sdcard/update-cm-7.0.0-Hero-signed.zip (Status 7) Installation aborted.
Anyone know what that means?
corey777 said:
Ok....I tried one more time using the Volume Down and Power, then selecting Home and for whatever reason it worked. So I cleared my cache and then I selected to installed zip from sdcard and selected the cyanogen zip file. I get E: Error in /sdcard/update-cm-7.0.0-Hero-signed.zip (Status 7) Installation aborted.
Anyone know what that means?
Click to expand...
Click to collapse
Could just be a bad download. Redownload it and try again. Or it could mean its the wrong type of file. Or the zip needs to be signed.
Yea its Me Again With The
Modified Hero
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
chipis said:
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
Click to expand...
Click to collapse
Rom manager cannot boot your device into recovery( at least not for me)
you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery.
I would suggest that you start over completely which will wipe the whole system. And use a rooted stock or custom rom from this forum. There is substantial amount of information on doing this in this forum and you will have to read, research before doing anything.
You can achieve this by reading the second post in general forum and skip to post 10.
chipis said:
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
Click to expand...
Click to collapse
Wish you would do a search here in the forum
If you did then you'd find a custom Clockwork Mod for your Streak but you're gonna have to not be lazy and learn to flash it with fastboot commands
And.even then you can't boot directly into Clockwork Mod. You have to go through stock recovery first
You have some reading to do
Sent from my cm_tenderloin using Tapatalk 2
cdzo72 said:
Wish you would do a search here in the forum
If you did then you'd find a custom Clockwork Mod for your Streak but you're gonna have to not be lazy and learn to flash it with fastboot commands
And.even then you can't boot directly into Clockwork Mod. You have to go through stock recovery first
You have some reading to do
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the help, but somehow it dont boot into stock recovery
and now it has bootloops for trying many things and dont work for me.
Bad thing i not good on commands and dont know how to flash it that way.
datfat said:
Rom manager cannot boot your device into recovery( at least not for me)
you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery.
I would suggest that you start over completely which will wipe the whole system. And use a rooted stock or custom rom from this forum. There is substantial amount of information on doing this in this forum and you will have to read, research before doing anything.
You can achieve this by reading the second post in general forum and skip to post 10.
Click to expand...
Click to collapse
Thanks Your Help Is very appreciated, I just did that and dont do nothing just reboots normally. No Stock Recovery. OR iam dong it wrong
I press Vol + and then power and goes through the dell light color ect.
Well through all the normal reboot
Here another thing that i cant used the devised because now it has bootloops, I tried SaveMode and the device runs great that way, but when i go to settings to Factory restore it reboots but then again with the bootloops.
So in another words i have to flash a recovery and another Rom or theres another easy way besides Commands?
chipis said:
Thanks Your Help Is very appreciated, I just did that and dont do nothing just reboots normally. No Stock Recovery. OR iam dong it wrong
I press Vol + and then power and goes through the dell light color ect.
Well through all the normal reboot
Here another thing that i cant used the devised because now it has bootloops, I tried SaveMode and the device runs great that way, but when i go to settings to Factory restore it reboots but then again with the bootloops.
So in another words i have to flash a recovery and another Rom or theres another easy way besides Commands?
Click to expand...
Click to collapse
Well I have some possibly bad news for you....
Unfortunately most that have tried to do a Factory Reset from within Android end up with their Streak 7 in what is called Read Only mode for which the only fix is sending it to Dell.
To boot recovery you have to hold BOTH the Volume + and Power buttons at the same time until its in recovery.
From stock recovery you then choose factory reset. I would recommend you do nothing more than that until you learn fastboot and adb commands. Like I told you earlier, you have a lot of reading to do
Sent from my cm_tenderloin using Tapatalk 2
Ok Finally, at least got to Flash A Recovery but When i go press Vol + and power at the same time it does not go thru the recovery mode.
I have to flash a stock recovery ? If so can some one provide me the link that great.
I tried the APX fastboot and the Tablet recognize the command thru command promt.
chipis said:
Ok Finally, at least got to Flash A Recovery but When i go press Vol + and power at the same time it does not go thru the recovery mode.
I have to flash a stock recovery ? If so can some one provide me the link that great.
I tried the APX fastboot and the Tablet recognize the command thru command promt.
Click to expand...
Click to collapse
First, APX and Fastboot are two completely separate systems.
Second, Press Volume+ and Power, then chose the section option there that says "Install a package" that should take you into recovery.
giveen said:
First, APX and Fastboot are two completely separate systems.
Second, Press Volume+ and Power, then chose the section option there that says "Install a package" that should take you into recovery.
Click to expand...
Click to collapse
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
chipis said:
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
Click to expand...
Click to collapse
You have to hold the buttons until it actually boots into recovery
Sent from my cm_tenderloin using Tapatalk 2
chipis said:
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
Click to expand...
Click to collapse
For fastboot , press and HOLD (Volume Down) and (Power), press and hold till its at a black screen with red text.
Then in device manager install the Dell Streak 7 Bootloader (we call them fastboot) drivers.
Command will NOT flash, and be done
It will say something like this
"reading recovery.....OKAY
writing recovery.....OKAY
completed in xxxx seconds"
giveen said:
For fastboot , press and HOLD (Volume Down) and (Power), press and hold till its at a black screen with red text.
Then in device manager install the Dell Streak 7 Bootloader (we call them fastboot) drivers.
Command will NOT flash, and be done
It will say something like this
"reading recovery.....OKAY
writing recovery.....OKAY
completed in xxxx seconds"
Click to expand...
Click to collapse
ok Thats exactly what i have on my computer.
So what the best way, because i cant boot into recovery mode it goes straight to the normal boot, some how its not installed the recovery mode i guess.?
chipis said:
ok Thats exactly what i have on my computer.
So what the best way, because i cant boot into recovery mode it goes straight to the normal boot, some how its not installed the recovery mode i guess.?
Click to expand...
Click to collapse
ok how do i installed recovery. I follow the step but iam kind of noob on this.?