Database Develop

[Q] Stuck on AT&T screen and ODIN can't detect phone

So I was messing about with Cyanogen Gingerbread, didn't like it and tried to restore a Froyo backup. The backup failed (kernals don't match right?) and now I cannot get past the AT&T screen on a normal power up or when trying to enter recovery. I tried to go back to stock using ODIN, but no com port is opened when I enter download mode and the phone is showing up as an unknown device in device manager. I have installed the x64 USB drivers, but I still cannot get ODIN to recognize the phone. Any suggestions?

When you say you are using x64 drivers, I'm assuming you are running either Vista or Windows 7 64-bit. I have heard there have been issues with 64 bit Windows drivers and getting the computer to recognize your phone properly.
I would recommend uninstalling the drivers, re-download a fresh set of drivers from Samsung and try again. Also, did you try to reboot your computer and attempt to get it to recognize your phone? Try different USB ports also. If it is possible, try a different USB cable. Finally, if you have a 32-bit OS handy, I'd try that.
Hope this helps and good luck!!

i run windows 7 64 and have no problems at all. make sure to uninstall samsung keis.
and reinstall the samsung drivers alone.

Phone Stuck in Download Mode - Computer Don't Recognize Phone

Hello,
I was recently trying to load a stock rom on my LG540 and the process was interrupted because of a power failure. But the phone luckily booted into "download mode". I want to reflash using the procedures discussed in various posts on bricked phones, but my computer can no longer recognize the phone. The KDZ updater reports "Phone not Found". The correct drivers are installed and I am running windows 7 home edition.
Any thoughts as to how to get the computer recognize the phone?
Thanks, MN

maybe using "Run as administrator"

Try installing these drivers, they helped me when I first used KDZ. The links are from a hungarian site.
http://www.4shared.com/file/Zx52g1kl/Optimus_GT540_pc_sync.html

I think the bootloader is corrupted, it's basically "bricked", but not fully

Drivers must be the issue. Try uninstalling LG driver, reinstall it or use Windows Update to install drivers.

Bricked GT540
Maybe you can use LGDP2 ??

Windows will not connect to P7310

Happy new year all,
I have a 8.9 wifi only 32gb amazon.com version 7310.
I can’t get it to connect to my windows PCs (multiple PCs) ANYMORE…I have the drivers installed, but when I plug it in, windows will ask me for the driver and when it tries to install it I get an error (device not installed properly).
Some history:
I have the usb driver (“GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe”) installed from the thread: “[GUIDE]Root, Bootloader Mode, ODIN, Recoveries & NANDROID Backup [7300/7310]”
Fresh off the box I hooked the tab up to my windows XP PC using the above driver and my PC recognized it. Also ODIN connected too.
I installed CWM (“Overcome_CWM_Recovery_v5.1.2.6_P73xx.zip”) from the above thread and rooted the tab using the root file (“Root.zip”) also from the above thread.
After that I couldn’t get the tab to be recognized from my PCs. But ODIN still works.
BTW, I’ve also tried Samsung Kies but it did not work (couldn’t connect to the tab).
I did a hard reset but I still have the same problem!!!
I need to be able to move files from my PC to the tablet as fast as possible. Wifi works but it is slower than usb 2.0!!!
Any help?
Thank you,

Have you tried uninstalling the drivers, restarting, then installing again? Sometimes Windows is a bit iffy. Also, the drivers from Kies are kinda different and tend to conflict (happened to me once). Another tip I'll give you: certain ROMs tend to hate having USB Debugging set to ON at Settings > Applications > Development. They just won't connect through USB while having that set to ON. I found this behavior on Android 3.1 ROMs, haven't had it in the KJ5 firmware and it's been almost two months with it. Best of lucks solving this!

issue solved by re installing the kies
Thank you for your suggestion.
Re installing kies and the latest kies update solved the issue.

MTP USB

Hello,
since yesterday afer a driver update my MTP doesnt work anymore !
I did everything...deinstalled driver installed driver...sync manager..etc I can put files on it everything ist fine !
The only thing which doesnt work ist MTP, so I cant use fastboot to s off for example ! Toolkit works to flash cwm recovery for example
Please help me

I'm having the same problem. I CAN connect it to my pc, and access the storage on my phone. When I try this on my laptop it will just restart HTC sync a few times.
In my device manager it shows MTP as Other devices. I tried installing a driver for it, but that didn't work out either. I'll be home this afternoon and try to copy the drivers from my pc to my notebook to see if that works out..
Anyone with a real solution?
*Update*
Tried to connect it to someone else his PC here in the office and there it worked.. I guess I'll have to reinstall my Windows. I messed around with it quite a bit... Have some problems with Visual Studio too because of it.
Have you tried connecting it to any other computers?

Need to flash Ativ S missing drivers?

Hi all.
I started experiencing weird problems with my Ativ S, so I thought I do a hard reset and start clean. I got stuck to a known issue with the Ativ and GDR3, where after hard reset the apps wont instal from the store. The only solution I saw was to flash the device. I have the GDR2 rom so I thought no problem, however I cant get the drivers to instal on the download mode so I could start the flash process.
I have tried to instal 2 different drivers: SamsungUSBDriver.msi and I8750_Qualcomm_USB_composite_driver_HK11-VB717-38.zip Neither of these (that I found, if they are the correct packages) have worked so that the Ativ is recognized correctly in the download mode and I could start flash. When Ativ is connected in the download mode, its only seen as USB DOWNLOADER with exclamation point at device manager.
Im running 64bit Windows 8.1 Pro system.
Any suggestions are welcomed! Thanks!

And installing SamsungUSBDriver.msi results in an error pictured here. Although next time trying to instal the driver is present as it gives an repair option.

Ok so I found this, probably somthing that could be expected: 2. Install Driver on your PC (i had problems with win 8.1 X64, win7 X64 installation fine)
http://forum.xda-developers.com/showthread.php?t=2391138
So I would need a Win7 system, no idea where I would have one... Other suggestions for this?

Ok problem solved by installing Windows 7 to a empty drive just for this flashing. Luckily I didnt have to instal any updates, just the os and the usb driver.