H guys need some help. Just update my Galaxy S with both JM7 and then with JM8. I updated from my original Norwegian firmware I9000XWJFB/I9000SWCI9000XEEJG1/I9000XXJF5/I9000XWJFB. Problem is after the update I have only wifi connections. I am unable to get any 3G or Edge or any sort of mobile internet connection. I can still phone out etc. Just no mobile internet. I have tried flashing back to JF5, but I get some russian language and still no 3g. Any help would be appreciated.
I have also added Tayutama_Edition_Voodoo_Full_v1.1. But even without it still no 3G.
Currently : PDA:XWJM8 Phone: I9000XXJM4 CSC: OXAJM1 Not sure what that means.
I am in Norway if anyone knows of a firmware I can downgrade to or use in this region. Did not backup my original firmware.
Sounds like you need to set up your apn.
Sent from my GT-I9000 using XDA App
Google for your network providers APN codes, and then set them in settings.
Thanks guys got it working...reflashed the csc file with xee jm1. It worked. Man was I getting worried.
Sent from my GT-I9000 using XDA App
no 3g connection after upgrading to gingerbread for galaxy tab
Dont have 3g connection when i updated my tab from froyo to ginger
My network is singtel from singapore
please help me
email me asap thank you very much
Hi all!
Back when Gingerbread got released in Italy, I flashed my P1000 Tab with the Italian software and changed the CSC to ITV. Now that Gingerbread is released in Asia, I installed DXJPC, and changed the CSC to my country's CTC which is XTC. I used * # 272 * imei # to change it. Everything is fine however when I connect to Kies it shows my CSC as Italy. Why is it stuck?
In Kies it shows PDA:JPC / PHONE:JPC / CSC:JPC (ITV)
It should be XTC because in the CSC selection menu I selected XTC. Why won't it change from ITV?
Kies are dumbA** , don't focus on it , even me i tried manytimes even though i get back to froyo with my stock rom and the dirty A**hole is showing me that in UK .. LMAO ..
k0sh said:
Kies are dumbA** , don't focus on it , even me i tried manytimes even though i get back to froyo with my stock rom and the dirty A**hole is showing me that in UK .. LMAO ..
Click to expand...
Click to collapse
Haha! I know it sucks but I just want to experience the update officially. It would be nice if Kies did work, even just once.
Sent from my HTC Incredible S using XDA Premium App
prinzhernan said:
Haha! I know it sucks but I just want to experience the update officially. It would be nice if Kies did work, even just once.
Sent from my HTC Incredible S using XDA Premium App
Click to expand...
Click to collapse
I think the problem is that your previous ROM is Italian.
What i did is flash back stock ROM (Asian DXJK2), change the CSC to my country's (XSO) and Kies detect my tab correctly and do the Gingerbread update with the same CSC.
cymagnus said:
I think the problem is that your previous ROM is Italian.
What i did is flash back stock ROM (Asian DXJK2), change the CSC to my country's (XSO) and Kies detect my tab correctly and do the Gingerbread update with the same CSC.
Click to expand...
Click to collapse
Yep yep! Figured out the same solution and used Kies to update to Gingerbread too. Everything is fine now. I recorded the process in another thread. Thanks for the reply!
Sent from my GT-P1000 using XDA Premium App
Hi All..
I have been having some peculiar problems regarding modems and was hoping someone could share some insight on it.. I get my modems here: http://soggycashew.weebly.com/index.html , and currently am on MIUI, but the same problem that I am facing persists with CM7, ICS, or any I9000/I897 roms too.
First off, I'm from Malaysia and using Celcom, thus these bands are used:
3g: WCDMA-2100
2g: GSM-900
The problem that im facing is, whenever I flash a modem that doesn't have 3g 850mhz by default, I break my 2g.
Something like this: Flash a modem with 850mhz by default (ones that i tried: UGKG3,BVJJW2,UGKC1,UGJK4), everything works fine.
Flash modems that don't have 850mhz by default (ones that i tried: ZSJPG, DXJV9, ZSJV6), 3g works fine (wcdma 2100) but 2g is broken and if i force it to "2g ONLY" i get emergency calls only. Checking the service menu, i realise that it is getting a signal from another carrier using the gsm-1800 band, but doesn't get anything from home network on gsm-900 band.
Any idea why and how to overcome this?
Hmm... Use one of the modems that work for you, and the problem is solved!
Sent from my CM9 ICS i897 Captivate
You can try looking at samfirmware.com see if there is intenational package for your are and pull our the modems then put it in a cwm scrip for cm7/ics.
korockinout13 said:
Hmm... Use one of the modems that work for you, and the problem is solved!
Click to expand...
Click to collapse
Yea, that works too, but all the modems that work are not even remotely meant for my region.
prbassplayer said:
You can try looking at samfirmware.com see if there is intenational package for your are and pull our the modems then put it in a cwm scrip for cm7/ics.
Click to expand...
Click to collapse
Actually the modem that is used here officially for the i9000 is DXJV9 and already available and is one of the modems that I tried but is giving me the problem..
I'm using BVJJW2 for now, somehow UGKG3 heats up my phone very fast.
I have similar problem.
My cappy can use only 2G network but not 3G.
I am running on Doc's Master ICS V3.1 with its default baseband.
Is there any one facing the same problem ?
Please advise.
Hello everybody I'm having a bit of a problem with my SGS i9000, international version. I'm currently running CM7 with the UGJL2 modem.
I recently signed up for a data plan. My carrier is Movistar Chile.
Problem is, I can't connect at all. Not even on EDGE. I have checked the APN settings and they're OK.
I have also tried changing the settings in Service Mode to no avail. When I choose any other setting than GSM 1900, I don't get any service.
Also tried changing some settings in Testing. Nothing.
Tried flashing many modems, most of them with 850 enabled, no good.
Any ideas?
I might suggest to flash a different modem or one of the radio 850mhz files found on this site.
Sent from my GT-I9000(m)
Darky 10.4.2 xwjw1
Semaphore 2.6.35.7
Go Launcher
Best combination in my opinion
use ugkc3 modem
bambam1978 said:
I might suggest to flash a different modem or one of the radio 850mhz files found on this site.
Sent from my GT-I9000(m)
Darky 10.4.2 xwjw1
Semaphore 2.6.35.7
Go Launcher
Best combination in my opinion
Click to expand...
Click to collapse
I have tried many diferent modems... JL2, BVJJPG, TLJL3, UGJK3 and UGJK4. None of them worked
What do you mean by "radio 850mhz files"?
Gildegan said:
use ugkc3 modem
Click to expand...
Click to collapse
I can't recall if I tried that modem. Will flash and check. Thanks for your responses!
EDIT: flashed KC3, no good. There's no way it'll connect with 850, just 1900. Tried changing settings in Service Mode, nothing.
Maybe flashing another ROM?
Try this for 850mhz
I am on Telstra in Aussie and we use the 850Mhz, and when I upgraded ROMS I had to sort out the same issue you are having. I found a Telstra modem, opened a modem file, swapped my modem into it and put it into my phone. The in recovery opened the file an it all worked. Not sure if that is the correct way, but it works for me and gives me both 850 and 2100 for Telstra.
Change your rom to jvu, its sweet, and try to use the modem that was in your stock rom from chile
Im using simplicity + semaphore+ UGKG3 modem
Sent from my GT-I9000 using Tapatalk
alramsay said:
I am on Telstra in Aussie and we use the 850Mhz, and when I upgraded ROMS I had to sort out the same issue you are having. I found a Telstra modem, opened a modem file, swapped my modem into it and put it into my phone. The in recovery opened the file an it all worked. Not sure if that is the correct way, but it works for me and gives me both 850 and 2100 for Telstra.
Click to expand...
Click to collapse
Thanks for the input I actually tried doing that, but it didn't work
Gildegan said:
Change your rom to jvu, its sweet, and try to use the modem that was in your stock rom from chile
Im using simplicity + semaphore+ UGKG3 modem
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. Sadly, the phone was imported all way from England... not the smartest thing to do...
So tecnically there is no stock Rom for the I9000 from Movistar Chile.
However, now that you mention it, Movistar used to sell the I9000B here, and I'm not sure if I could grab the modem file from a I9000B from Chile (if I happen to find one) and flash it. Are I9000 and I9000B modems compatible?
EDIT: found out something weird. I actually got a hold of a SGS2, factory unlocked, and swapped the SIM cards. In the SGS2, the APN settings from Movistar Chile are picked up automatically (preconfigured?), thought there is still no connection when Data is enabled. This (APN settings preconfigured) DOES NOT happen on the SGS1, as if there weren't any settings predefined. I have to put them manually. Why...?
With the other SIM card (Entel Chile), both phones set the APN automatically and connect to the data plan without issue.
Does this mean there's a phone issue AND a carrier issue?
I also forgot to mention that I got rid of CM7 and flashed the latest Darky's Rom, JVK modem, 850 enabled as far as I know.
The apn issue is from the preloaded apns from the rom you uses, it happened to me no other than simplicity.
The letter b on i9000 means the region, from example im in mexico and i have a i9000t that its for latinamerica, the i9000 alone its erupean and MAY BOT HAVE 850mhz antenna
Do you had 3g before the data plan weon? Hehehe
Sent from my GT-I9000 using Tapatalk
Gildegan said:
The apn issue is from the preloaded apns from the rom you uses, it happened to me no other than simplicity.
The letter b on i9000 means the region, from example im in mexico and i have a i9000t that its for latinamerica, the i9000 alone its erupean and MAY BOT HAVE 850mhz antenna
Do you had 3g before the data plan weon? Hehehe
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Ohhh, so the APNs are Rom related? Interesting, I might try flashing another Rom. Thanks
I have flashed Captivate modems on the SGS and they work. Could I9000B modems also be compatible?
Dont know if i9000B have 850 MHz
Bit if it have, it will work
Sent from my GT-I9000 using Tapatalk
Gildegan said:
Dont know if i9000B have 850 MHz
Bit if it have, it will work
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
It should have 850MHz, since that's supposedly the frequency Movistar uses here...
Still trying to figure out what to do
Have you tried to make sure it is enabled in the network mode/cell info/power info menu
in your dialer: *#0011#
and make sure under all the options 850 is enabled
---------- Post added at 11:15 AM ---------- Previous post was at 10:56 AM ----------
http://androidforums.com/samsung-ga...rk-frequency-your-samsung-i9000-galaxy-s.html
dlockhart said:
Have you tried to make sure it is enabled in the network mode/cell info/power info menu
in your dialer: *#0011#
and make sure under all the options 850 is enabled
---------- Post added at 11:15 AM ---------- Previous post was at 10:56 AM ----------
http://androidforums.com/samsung-ga...rk-frequency-your-samsung-i9000-galaxy-s.html
Click to expand...
Click to collapse
Thanks for the reply, but I already tried that, didn't work SGS doesn't support 850mhz out of the box, which is why I flashed another modem in the first place.
Ok there's a cm7 radio zip it worked for me when I was on it ill find the link and post soon.
Found it here top of the page - kg3
http://forum.xda-developers.com/showthread.php?t=1158783
Sent from my GT-I9000 using Tapatalk
i have problem with conection to gsm network after flashing 2.3.6 stock rom with odin >>> the rom its for germany and im from syria midlle east >> i tried to reflash the midlle east rom 2.3.5 but same problem please help >
You might be having bigger problems with your keyboard. Try to solve it first!
I do not respond to tech support via PM
U must scribe Apn settings for baseband yours operator or qwestion yours suport operator.
Sent from my GT-S5830 using xda app-developers app