Database Develop

WTF, My Kaiser has gone CRAZY and hung itself???

Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks

GLO said:
Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks
Click to expand...
Click to collapse
First thing in such cases is a hardreset.

Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups.

Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups
Click to expand...
Click to collapse
Some software or setting you've done, or it was simply Murphys Law:
When the mistake could happen, it will happen

Should i upgrade the radio at this point?

Its like with PCs, u need to reinstall your operation system from time to time.

Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers

CLF said:
Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers
Click to expand...
Click to collapse
Hi:
You can go into start/settings/system/clear storage. That will hard reset your device.
EDIT: Oops, sorry I missed your last line. Please disregard my post

ROM Install disapears

Hi,
I am having issues with my HTC Diamond after reseting my handset this morning i was presented with the bootloader screen with no apparant operating system.
I have managed to install a rom and went through the setup screens but upon completion the phone reboots and i am back to the boot loader.
My phone has SPL 1.34.Hard and was running the last dutty rom for about 2-3 months.
Anyone have any ideas on what i can do short of ring up my insurance and telling them i lost it haha

After some reading of a hundred million threads i came across the solution which i will share here incase anyone has my problem.
Hold down volume up + center button and reset (with your third hand lol). The screen then goes gray and preform a restore.
I really hope this helps someone else in that finds there way into my situation

Seems to bve getting beyond a joke now lol. the Phone boots up and then loads into WinMo. After reseting the device it goes straight into the boot loader again and stays there.
I have tried both options on the restore screen including the formatting of the NAND memory.
[edit] Ran the process again and it worked the second time reboots into the OS now [/edit]

Possibly a dead Kaiser, suggestions? (or purchase!)

So, I plugged my Kaiser (Tilt) into my computer the other day to charge it, and the next morning when I unplugged it, I noticed it was locked up. No biggie, I soft-reset it, and it came directly back to the bootloader (right before the bootloader shows is a white screen, that says "Loading image... No image found!", that flashes for a fraction of a second.
If I plug it into my computer at this point, Windows says the USB device has malfunctioned and it doesn't recognize it. I can't flash it ("connection error"), and it wouldn't hard reset.
Then it kinda came back to life, kinda. Suddenly it'll boot into WM. Windows still doesn't recognize it, but I used JumpSPL to get it into a bootloader, and tried to install a HardSPL on it so I could flash a new ROM (to this point it's been stock-only because it belongs to the company I work for). The HardSPL flash failed partway through, and then it was stuck in bootloader for real. At that point I tried flashing a stock ROM, and it kept failing at different points, never getting more than about halfway through.
Does anyone have any suggestions? Or, do you want to buy it? At this point it's mine (company doesn't want it back), so I'm willing to experiment freely with it. Right up until my Touch Pro 2 comes in and I lose interest
*** UPDATE ***
So after writing this, just for kicks, I decided to give re-flashing the original ROM one more shot (it's been off and untouched now for several days at this point) and the flash succeeded. We'll see where it goes from here

Good luck with your phone.. I hope all goes well.. If you find out what the problem was/is, let me know

Hey godefroi, im new to all of this, just bought a messed up tilt from my friend, and i want to know if you could givve me the link for the insturctions to refalsh my tilt

Just hit up AT&T's site (which redirects you to HTC's site) and download the ROM. The file you want is "_ATT Tilt_RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe", which was the latest update for the phone.

Seems it's not fixed. After playing around with it for a couple days, it's back into bootloader and stuck there. Taking out the battery and leaving it for a few hours brings it back for a while, but it seems there's no permanant fix. Next step will be flashing HardSPL and a custom ROM. I'll update when that happens.

awww dang, that sucks. thank you for tellin me. hopin your tilt comes out ok

Did you ever get this resolved?
Hey man did you ever get this fixed? I cant find anything on it.
I can get to a boot loader screen and it shows USB and when I plug it into my computer I hear the sound that it's recognized but my active sync wont connect.
This is what I posted earlier and a moderator killed the post because I didn't spend hours hunting for a solution first before posting. I don't think one exists but if there is I would be glad to know it. I have flashed this phone and my older HTC Wizard dozens of times with no issues so Im not a "noob"
Earlier today I was taking a picture and the screen kind of stuck so I has to soft reboot it.
It didn't come back up. I was left at the rainbow bootloader screen.
I tried holding the camera button down and rebooting but it didn't change anything.
I tried several different combo's of holding keys down and rebooting and it always came back to that bootloader screen.
So the next thing I did was to format my cd card and downloaded KaisDiagTest1.zip and then coppied the KAISDIAG.NBH image file from the zip on to the root of the sd card.
That worked fine and I was left at a screen saying SPL 1.00.OliNex.
Next thing I did is were I think I screwed up. I flashed it with _ATT Tilt_RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign _22.45.88.07_1.27.14.09R2_Ship.exe which is the ROM from the HTC site and I think I was only supose to use a custom ROM and now after it finished flashing the ROM it rebooted and is stuck showing loading ... on the screen.
It goes past the boot loader and is stuck at loading...
Please advise if there is anything I can do.
Cheers,
Chris
godefroi said:
So, I plugged my Kaiser (Tilt) into my computer the other day to charge it, and the next morning when I unplugged it, I noticed it was locked up. No biggie, I soft-reset it, and it came directly back to the bootloader (right before the bootloader shows is a white screen, that says "Loading image... No image found!", that flashes for a fraction of a second.
If I plug it into my computer at this point, Windows says the USB device has malfunctioned and it doesn't recognize it. I can't flash it ("connection error"), and it wouldn't hard reset.
Then it kinda came back to life, kinda. Suddenly it'll boot into WM. Windows still doesn't recognize it, but I used JumpSPL to get it into a bootloader, and tried to install a HardSPL on it so I could flash a new ROM (to this point it's been stock-only because it belongs to the company I work for). The HardSPL flash failed partway through, and then it was stuck in bootloader for real. At that point I tried flashing a stock ROM, and it kept failing at different points, never getting more than about halfway through.
Does anyone have any suggestions? Or, do you want to buy it? At this point it's mine (company doesn't want it back), so I'm willing to experiment freely with it. Right up until my Touch Pro 2 comes in and I lose interest
*** UPDATE ***
So after writing this, just for kicks, I decided to give re-flashing the original ROM one more shot (it's been off and untouched now for several days at this point) and the flash succeeded. We'll see where it goes from here
Click to expand...
Click to collapse

I never did. Every once in a while I can get it reflashed, but inevitably it stops working. Just like yours, I'll sfot reset it and it'll be stuck in bootloader.

Best bet is when it gets stuck on the bootloader or on the "white screen" as to put it. Do the following:
1) Unplug battery, memory car and simcard. Reinsert battery ONLY after 3 seconds (cards stay out!)
2) Hold BOTH softkeys down at the same time
3) Whilst holding softkeys, turn the unit on
4) You will be prompted to press "SEND" to reset all user data (you will lose everything on the internal storage. Press the Dial (green button) to reset.
5) When it's finished, you will be prompted to press "SEND" to reboot. Press send and it will boot into WM but might take slightly longer.
6) Realign your pointer and tada. It's up and running.
n.b. This often happens when the radio version of your phone isn't correct. If you notice, when you get stuck in the "white screen" the "gsm signal sight" is frashing green!
I've got to warn you again, this procedure WILL delete all of your internal user storage, hence why I recommend taking out all of the cards before proceeding.

heyadrian said:
Best bet is when it gets stuck on the bootloader or on the "white screen" as to put it. Do the following:
1) Unplug battery, memory car and simcard. Reinsert battery ONLY after 3 seconds (cards stay out!)
2) Hold BOTH softkeys down at the same time
3) Whilst holding softkeys, turn the unit on
4) You will be prompted to press "SEND" to reset all user data (you will lose everything on the internal storage. Press the Dial (green button) to reset.
Click to expand...
Click to collapse
Nope. Stuck in bootloader is stuck in bootloader. Like, stuck. No, really, it's stuck. Hard-resetting doesn't get it out.
heyadrian said:
n.b. This often happens when the radio version of your phone isn't correct. If you notice, when you get stuck in the "white screen" the "gsm signal sight" is frashing green!
Click to expand...
Click to collapse
There's no white screen, just bootloader rainbow. Also, there's no chance that I flashed the wrong radio, because this phone has never been flashed with anything but the official ROM. It's never even had a HardSPL flashed on it.

hmmm...now that you mention it has never had a hardSPL, maybe that could be the next step?
i understand that some people may want to keep a "stock" configuration in case waranty needs to be claimed or for any other valid reasons...but if the phone is out of waranty, theres little to lose.
only reason i'm suggesting it is because cmonex has a hardSPL that aims to fix EXACTLY this problem, among others (if i understand your problem and cmonex's fix correctly):
http://forum.xda-developers.com/showthread.php?t=420683
also, this thread links to a page in the wiki about your problem (or something along the same lines):
http://forum.xda-developers.com/showthread.php?t=423486
finally, a collection of hardSPL versions can be found in this "roll up" thread:
http://forum.xda-developers.com/showthread.php?t=498320
i guess you may have already gone through the above mentioned links but if not, they may open up more avenues for troubleshooting or even a permanent resolution.

Diamond wont boot anymore

Hello,
Yesterday my Diamond stopped working.
I started Call of Duty 2 and it hangs up.
So i removed the accu because nothing worked.
i put the accu back in and the phone wont boot.
It shows the Screen where "Touch Diamond" appears where you can see your bootloader version and rom version.
and nothing more happens.
is it possible to do something?

OK...
make MTTY from attach files, flashing any rom sutebl ,its work
evry thing will be right

wow big thx.
my phone is booting
but all sms and contacts are messed up

OH.... so sory for messed up but it is least possbile losses,always keep copies of all them,any way Congratulations to the return of your device to life once again

Touch HD locks up with black screen on multiple Cooked ROMs

Hi,
my custom ROM flashed Blackstone has this nasty habit. After some days I try to turn him on but the screen stays just black. The only way to bring him back to life is to take out the battery. Because of these freezes I overslept multiple times as the Blackstone did not wake me up.
I tried Goldlocke, Gregor G10 and Topix. I always do a task29 before flashing a new ROM. I also tried multiple radios like 1.13, 1.14 and actual 1.17. Before I had Dutty 4.3 which did not have this problem.
If anybody can give me a hint about the problem I would be thankful.

Not sure if it can help, but...
Try to delete the "Application data" folder in your microSD card.
Bye, Marco.

...
sounds like ''microp error''..

...
....................

...
''''''I try to turn him on but the screen stays just black.'''''''
***
KEEP TAPPING THE POWER BUTTON UNTILL YOU FEEL IT VIBRATE, NOW WHEN IT VIBRATES, ITS ON.. (SO STOP TAPPING POWER BUTTON)
WAIT TO HEAR ''HTCSTARTUP.WAV
NOW START TAPPING POWER BUTTON AGAIN UNTILL THE WELCOMEHEAD.PNG IS DISPLAYED..
LET ME KNOW IF YOU HAVE THE MICROP ERROR...

hurzwa said:
Hi,
my custom ROM flashed Blackstone has this nasty habit. After some days I try to turn him on but the screen stays just black. The only way to bring him back to life is to take out the battery. Because of these freezes I overslept multiple times as the Blackstone did not wake me up.
I tried Goldlocke, Gregor G10 and Topix. I always do a task29 before flashing a new ROM. I also tried multiple radios like 1.13, 1.14 and actual 1.17. Before I had Dutty 4.3 which did not have this problem.
If anybody can give me a hint about the problem I would be thankful.
Click to expand...
Click to collapse
I had similar problem, so I sent my phone to repair. Now I have new motherboard and display. Everything is O.K.

malson said:
I had similar problem, so I sent my phone to repair. Now I have new motherboard and display. Everything is O.K.
Click to expand...
Click to collapse
This is is not really good news
I have same error!! Will try the original ROM for a few days before I descide to scrap it!

...
this could also be a battery issue!

AvengerII said:
Not sure if it can help, but...
Try to delete the "Application data" folder in your microSD card.
Bye, Marco.
Click to expand...
Click to collapse
No lockup since almost a week now! It seems your "solution" works fine. Do you know the background of this behaviour?

...
probably you have installed something onto the sd card and not uninstalled it or flashed new rom, leaving the data still on the sd card and the device reading it as it would..

curvyjomanjy said:
This is is not really good news
I have same error!! Will try the original ROM for a few days before I descide to scrap it!
Click to expand...
Click to collapse
YES, I flashed original SPL, original firmware. The problem was still here. So i sent the phone to reclaim.

which folder in Application Data to delete?
I have two: HTC and Maxsense. In maxsense its just an image. in htc its databases and imagecache

...
delete entire folder..

Just tried myself deleting app data but still no joy....
I have found that my HD locks up in the dark !!
If I have the phone in my pocket, 9 out of ten times it locks up.. Only once it has locked up out of my pocket !! Screen lock is also on to stop any button press problems..
I have switched auto back light OFF and Pocket mode OFF but it still does it..
Any thoughts / Ideas please ???

try uninstalling neos drivers, and if you can't, install nmet cab to disable this drivers. in some blackstones neo's drivers seems to cause this problem.

...
solved??..
if not..
dissable "auto adjust backlight" in power settings..
Rn