i hope this is the right place for this little problem im having
ok i was on Tael Rom 23683 and had a modded dialer on it
i went with the new rom 23145 and the modded dialer wont work
any one have any clues why it wont work
its kinda weird cause its also wokred on 23133 but not on 23138
WOW 200 views and noone even has the slightest idea
Related
Hey guys,
I got a little problem here and hopefully someone can help me. I'm using itje's Touch-IT 7 and I find I don't really like the dialer that is included. I much prefer the old default xperia dialer. Now I did install the old dialer, however, upon using it, the part where it shows the contacts are all invisible. It is still workable, however, you can't see the contacts. The colour of the font is not white.
So does anyone know the solution to this problem?
Thanks
Tri3Dent said:
Hey guys,
I got a little problem here and hopefully someone can help me. I'm using itje's Touch-IT 7 and I find I don't really like the dialer that is included. I much prefer the old default xperia dialer. Now I did install the old dialer, however, upon using it, the part where it shows the contacts are all invisible. It is still workable, however, you can't see the contacts. The colour of the font is not white.
So does anyone know the solution to this problem?
Thanks
Click to expand...
Click to collapse
How did you install? Maybe you can try the one I cab in my thread.
Yea I just tried your cab and its still the same.
hmm,, does anyone have a solution to this as I am experiencing the same problem with my fone,, I have installed a custom WM6.5 ROM and wanted to use the original Xperia dialer instead of the topaz dialer,, however upon installation of the xperia one I cannot see the contacts in the dialer mode :S ... everything else works fine tho,, I am able to scroll down n up but its like everything written there is invisible
*bump
I need this too! I love the 6.5 interface along with the tf3d goodies but without the dialer. Please help
So I've been running the test leak rom from ATT for a long time and jumped onto the new offical rom as soon as it was out. I went right away and installed it and went ahead and installed TF3D2 and the new Tachi PhoneCanvas as well.
The new Tachi Phone Canvas has a built in slide to answer that installs over the slide to answer built into the ATT ROM. The problem that happens is something to do with the graphics. The picture of the contact doesnt show up and the phone number gets screwed up as well.
I've attached a copy of a screen shot for anyone to look at. I'm sure this will be an issue for most people so thought I would start a thread for someone to figure out how to fix it. I'm sure its just some registry entry or something.
Have a look and lets try and figure this out.
Here's where to download the Tachi Phone Canvas http://forum.xda-developers.com/showthread.php?t=499076
Here's the New TouchFlo3d http://forum.xda-developers.com/showthread.php?t=493531
And the new ATT ROM http://forum.xda-developers.com/showthread.php?t=519698
same problem! Also, sometimes when i try to make a phone call, cprog.exe crashes too. i can deal with it, but a fix would be nice!
ALSO, i installed diamond gsensor2 again earlier and while i was in a call, i rotated my phone and I SAW a LANDSCAPE screen of the tachi dialer for a second!
When you installed the Tachi Dialer you were supposed to use a task manager and kill the cprog.exe process before you installed the new dialer. If you didnt do that then you'll have that issue you spoke of. I had it too and then reinstalled. Someone told me that we may try installing a different dialer that would disable the slide to answer built into the rom then reinstall the new tachi dialer.
The Tachi dialer doesnt have landscape... YET... so when you saw it in landscape it was probably just a glitch.
Has anyone had the problems I'm talking about here with the dialer canvas slide to answer?
I am also having the same issues with the contact pics and the cprog crashing. It also won't let me change contact pic from the contacts tab, but will let me send a pic to a contact from camera album tab. I did kill cprog.exe before installing the new dialer.
Well I tried installing the V4 XDA Black Slide to Answer (CDMA and GSM) canvas which installs and runs perfectly fine over the Fuze's new slide to answer screen and then installed new new tachi dialer on top of that and............. same problem. So so much for the idea of installing a working one over it and then the tachi cause that didnt work. Does anyone know the reg entries for this?
Sorry Aaron, I should have told you that I had tried the Slide V4 last night before I flashed to the new rom. before that I was having the same problem with the test rom from a couple weeks ago.
now i have searched and cannot fine the fix but for some reason the wallpapers i D/L from here all come up zoomed in and distorted. i have installed muns backgroundalltabs.02 so im not sure what im doing wrong any idea guys
thanks in advanced
What rom are you using? I had this problem with one of the popular roms I tried and that was the primary reasons I didn't use that rom and kept trialling others.
I think it was an early energy rom... maybe...
the rom im using is the NATF 4.7 WM6.1
Are all the pictures 480x640
know what im not quit sure how to check if they are 480x640 how do i go about checking that Sparkz?
I flashed my rom to 6.5 and then installed TF3HDB3 it worked fine. Then their was this app I installed that needed NETCFv35.Messages.EN.wm(The app was supposed to make TouchFlo have transparent top and Bottom bar) from their everything when downhill. I restarted my phone then I get this message saying shake .exe not working or some bull sh!t like that and now TochFlo wont launch So I uninstalled TF3HDB3, the app thats supposed to make the top and bottom bar transparent, and NETCFv35.Messages.EN.wm and now when I install it to the phone memory I keep getting TouchFlo can't install try a different location, problem is it has to be installed to the phone memory to work. I tried the memory card it works but that dosent help one bit. Please can someone help me out, Does anybody know why I can't install it to my phone memory anymore????, I hate titanium it's a freakin joke compared to TF3HDB3.Edit the app I was using to make the top and bottom bar transparent was MaxTF3D Theme Maker v4.1.
Update
I tried TFL3DB2 and itje full HD manilla CAB and they both installed correctly. Like what I had before, I installed Rostrain crystal touchx edition theme along with W7-TF3D icons cab. I posted pics to show what happen every time for both versions of TouchFlo HD 3D. On top of that after I uninstall crystal touchx and the W7-TF3D icons niether TouchFlo HD3D version will run again so have to uninstall them. I can't be the only person this has happen to, Please I know their is someone out their that Knows Something .
Why do i even bother even posting help threads this has to be the third thread I made where a 100+ people veiwed and not one tip or suggestion. sigh...... I miss motorolafans.com the days when I post a thread for help and get a response in the next 30 min to an hour not for 4-5 days later with 100+ people veiwed and get ABOUSTLEY NOTHING. Either my problems are so mind boggling that not one person out of the couple thousand people here has a "suggestion" or people really don't give sh!t on this site. My next smart phone is Defiantly going to be Motorola again.
Well dear... you got a very special problem:
TF3DB2 is a very old cabbed version of touch flo 3d from the htc touch hd. that was never build to run on winmob 6.5.
But I see that you've already learnt how to flash a rom. why don't you just choose a rom with build in touch flot from htc topaz/rhodium oder even htc hd2? they'll run a lot faste, have a lot more functions and are very stable.
good luck!
TheNicoT said:
Well dear... you got a very special problem:
TF3DB2 is a very old cabbed version of touch flo 3d from the htc touch hd. that was never build to run on winmob 6.5.
But I see that you've already learnt how to flash a rom. why don't you just choose a rom with build in touch flot from htc topaz/rhodium oder even htc hd2? they'll run a lot faste, have a lot more functions and are very stable.
good luck!
Click to expand...
Click to collapse
Funny out of 127 views finally one person finally says TF3DB2/B3 dosen't work right with 6.5 now thats freakin hilarious. @ TheNicot thank you for being kind enough for sparing your time and giving me a suggestion. The problem is after a flash it takes about 1-2 days to restore everything including with a backup program. 2. I've also read that some roms have a restart problem where the phone restarts by itself and I havent experiance that yet with gtrab's Pure 6.5. The main reason why I wanted TouchFlo3D was because of the Transparency with the Crystal theme, The W7-TF3D icons( which probaly won't work with LEO 2.5 anyway), and the panoramic back ground which is out now for leo 2.5. What bugs me the most about all of this is I had TF3DHDB3 with Crystal theme and W7-TF3D icons working flawlessly for 3-4 days straight no problem whats so ever until I got greedy with MaxTTF3Dmaker 4.1 trying to make the top/bottom bar transparent to match the theme and in the end it completley ruined TF3DHD in my cell and now it's back to the drawing board all over again with flashing to another rom.
I just switched to the new 2.5 sense leaked rom for the rhodium and I was hoping there is a way to port the old in-call screen to this new rom. Having the calendar and notes buttons was really nice.
Anyway, I posted this in the general forum but it doesnt seem to get much play there, and I dont suspect it will after thinking about it a bit. This is more of a ROM issue, and since there was no chef for this rom, I was wondering if the fine folks here who are more intimately familiar with ROM modification, could help me out a bit.
Thank you in advance.