Database Develop

[q] heeeelp!!! Please!

I have just bought galaxy s and i flashed to jm5 then used samset 1.9f then i think i have some fixlag on. BUT SUDDENLY WHEN I TRY TO REFLASH TO JM5 MY SGS GOT BROKEN??? i took some pic but how i add them here //sorry i am very new user
On screen all iget for options is these:
Android system recovery <2e>
Samsung Recovery Utils
- for BML-
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
----------------------------------------------
update media. please wait...
E:Can't mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.

Have you tried to reflash your Galaxy with Odin?
Downloads:
Odin
JM5 Firmware PASS: samsung-firmwares.com
PIT 512
Howto:
1.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
2.Select the PDA/Modem/CSC/.PIT files in Odin. (PDA=CODE, .PIT and PDA are required. CSC and Modem are HIGHLY recommended. They may be necessary depending on the PDA! Try flashing all three BEFORE reporting bugs, if you only used one initially!)
3.Remove the SD card and SIM card from the phone.
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.If the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
http://forum.xda-developers.com/showthread.php?t=723596

Your SGS is not broken you are just doing things without the right knowlegde.
Don't do things you don't understand !!!
Read before you do something !!!

Yes i have flashed mtimes with odin and successfully but this time its differrent i can't flash any rom and i keep having that error above

Welll it worked when i changed the .pit file which came with Odin to your .pit file and mine was 513 yours 512...but at the end when it booted there was one red line about some sytem ... it went fast so i could'nt read it but anyway thnx alot

You always have to use the correct PIT File for a Firmware.
Look at this:
http://samsung-firmwares.com/I9000.htm
Please read the FAQ Thread. ;-)

RTFM
10char

[Q] Flashing to stock; Download mode?

I need to flash my captivate to the stock rom, and I've followed the steps for Odin One-Click downloader (http://forum.xda-developers.com/showthread.php?t=731989) ; however, odin doesn't show anything? All of the little bars are blank. My "download mode" looks like this;
Code:
Android System Recovery <2e>
Samsung Recovery Utils
- for BML -
VOL UP - up
VOL DOWN - down
POWER - select item
reboot system now
reinstall all packages
delete all user data
delete cache data
_______________________________
# MANUAL MODE #
-- Appling muti-CSC...
Installing muti-CSC
I did a a google images search, and what I have doesn't look like download mode. What do I do now?
EDIT 3: Tried redoing the whole process again while having odin running first, working now. Possible to have this thread deleted?
EDIT 2: Download mode is still on, Odin told me that it failed the install, now phone is stuck in download mode and i'm scared to do anything to it :x Help?
EDIT: Tried the 3rd method, worked like a charm, now says
Code:
[Droid digging things image]
Downloading...
Do not turn off target!!!

[Q] [Help] [GT-I9000M] [Bell Canada] Boot Loop Issue [Odin]

**I've searched, asked, tried many different files--still boot loops**
tl;dr What files do I use in Odin to return to stock from a phone that boot loops? (i have no idea what software was on there before it started)
The phone came from Canada (Bell). Previous owner tried to unlock it for use in the US. Phone worked for a few days then turned off & wouldn't get past boot (it would show animation & sound then go into a black screen with menu/back key lit up). It was also missing volume up/down keys. Phone was given to me as I was moving back to Canada. Now here I am in Canada...
I've ordered & replaced the volume keys, got into download mode, and using Odin I've flashed "I9000XXJVU_I9000OXAJVU_OXA". I've no idea what software version was on the phone at the time. I used pit 512. The phone reboots and...
Code:
-- Copying media files...
[COLOR="Red"]E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet. please use UI men
u for format and reboot actions.[/COLOR]
Meida files copy failed.
-- Wiping data...
Formatting /data...
Formatting /dbdata...
Formatting /cache...
Deleting Meta Data
[COLOR="Red"]Data wipe failed.[/COLOR]
-- Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'KOR'
Successfully applied multi-CSC
The failed actions are due to me not having an SD card correct? And at the bottom there it says it applied the CSC-code 'KOR' for Korea? I'm in Canada.
Now the phone goes into a loop, flashing the "Galaxy S GT-I9000 Samsung" logo on and off for ever (no animation or sound this time). I also tried flashing the latest from sammobile (under GT-I9000M). It's a single file and that put me in a boot loop as well.
Any advice greatly appreciated!!!

Try this:
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version

Stuck on glowing Samsung logo

Hello!
This post might be a bit lengthy as I try to explain in detail what happened. Sorry for that!
I already read the posts suggested upon entering the title on this one, but I could not find a solution for my problem....
Three days ago, my P1000 (non-rooted, GB via Kies) froze. I turned it off (by pressing Power for a few seconds).
I turned it on again. It booted, but reached only the Samsung logo and would stay there forever.
I turned it off again, removed the external SD and did the factory reset (via Power+VolUp).
It did the reset, but the problem of the glowing logo remains.
I started to google a lot, and got acquainted with Odin, (Stock)ROMs, tar files, PIT files, etc.
but I could only gain a vague idea of all these things as I lack a deeper background knowledge.
So I downloaded several (Stock ) ROMS and PIT Files and tried to flash them on the P1000 using Odin.
The last combination was GB-Stock-Safe-v5.tar together with gt-p1000_mr.pit, recommended as being a good way to "re-stock" the P1000, which I tried to flash with Odin (repartition checked, since having a PIT file). It almost worked but movinand.mst failed. So I removed it from the tar file and tried again.
This time the hidden.rfs failed. So I removed it as well from the tar file. Then the flashing succeeded (but without the movinand.mst and the hidden.rfs)
And the problem remains.
When going into Android recovery mode <3e>, it says:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
csc : deleting /system/csc
csc : done
Successfully installed package.
-- Wiping cache...
Formatting /cache...
Cache wipe complete.
-- Updating application
E:failed to mount /preload (No such file or directory)
E:install_application_for_customer:Can't mount /preload
your storage not prepared yet. please use UI menu for format and reboot actions.
copy application failed.
-- Applying Muli-CSC...
Installing Multi-CSC
Can't access to '/system/csc/DBT/system/'
Successfully applied multi-CSC.
Maybe I have now what is called a "soft-bricked" P1000? My P1000 can only go into recovery mode and into download mode (and into "glowing logo" mode).
I would be grateful for any help so that I can bring the P1000 back to normal life...
Thanks in advance.
Larry

[Q] samsung galaxy boot problem

hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me

ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Would be great if you tried to explain what you tried to do with odin anyway.
what rom you tried to install?

ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Who says?
Which Rom are you trying to use and what are you coming from?
If flashing ODIN for JVU Rom :
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and put in your files for : CSC, PDA, MODEM.
Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Attach Phone
When you have all the files needed in ODIN, say JVU Rom for example as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted *File is included in ODIN Files*
Same again when you see S Logo on Phone unplug Phone Cable
Close ODIN
Let phone boot up ....
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Before doing this make sure you have what you need from the phone as it will ERASE everything!
Enable USB Debugging by going to Settings > Applications > Development > Check USB Debugging
Plug in Phone and copy over your chosen Custom ROM that you want
Reboot into Recovery : VOL UP + MENU + POWER
Wipe the 4 things (probably know these... you should do)
If not you choose these by using the left side keys on the phone and to apply changes click Menu key
WIPE : data/factory reset > cache partition
Scroll down and go to advanced
Dalvik Cache > Battery stats
Go Back
Install ZIP (ROM) from Zip Card
Reboot Phone when complete... DONE!
Hope this helps a lot of people if not just ask here if you are still having issues to save peole posting same questions again and again

I made up the first part, but after the phone went into recovery mode
The screen shows the following:
installin update ...
successfully installed package.
- Copying media files ...
e: failed to mount / sdcard (file exists)
e: copy_dbdata_media: cant mount / sdcard your storage not prepared yet. please use meny VI for format and reboot actions.
meida files copy failed.
- Wiping data ...
Formatting / data ...
e: format_volume: rfs format failed on / dev/block-mmcblkqp2
Formatting / dbdata ...
Formatting / cache ...
deleting meta data
Data wipe failed.
- Appling Multi-CSC ...
installing multi-csc
Cant access to / system / csc / eng / system /.
successfuly applied multi-csc.

Flash dbdata.rfs as PDA in Odin 1.85. Reboot. Congratulate yourself.
Sent from my GT-I9000 using Tapatalk 2

Helpppp
I have exactly the same problem. I had froyo 2.2 im new to this odin all these settings. Yesterday i was tried rooting my phone and I did. but after I mounted a courrupted rom from the recovery. and my android doesn't want to load. I followed the same instructions you just gave him. on these posts but now when i turn on the phone its the logo comes and nothing loads. Only Downloading VOL DWN + MENU + PW is working.

Are you talking to me devildrake? No, your problem is different and you need to flash the rom again too, not just dbdata lol. Do this.
Flash Gingerbread, in Odin (I always used JW4 but JVU will be fine) with 512 pit file and repartition checked. Untick reboot. Once its finished, unplug the USB cable and take the battery out. Put the battery back in and boot into download mode. Reset Odin. USB cable back in. Tick reboot again. Put dbdata.rfs in PDA. Flash.
Should boot into gingerbread. I've done this a LOT of times... Then you can go back to Odin and root.
If that doesn't work then I'd download a different version of GB, download new 512 pit, and download a new dbdata.rfs. Must be one of those corrupt.
Sent from my GT-I9000 using Tapatalk 2