Database Develop

My HD keep rebooting in spl

Hello,
my phone keep rebooting after i've flashed him with a rom.
After a hard reset, i've manage to put in the spl screen, and now i'm connected with mtty.
Now i need
can you help me

Have you put the hardspl? or Uspl?
Put it in Bootloader mode and flash a shipped rom, after re-flash the hardspl and try other rom!

thks for your reply.
i've put hard spl.
i'ven't been able to flash it with an official rom cuz i haven't found many, and the one i've found in the forum (danish and swedish) still need the phone to be synchronised with active sync. where can i find a rom which doesn't need active sync ?

syroz said:
Hello,
my phone keep rebooting after i've flashed him with a rom.
After a hard reset, i've manage to put in the spl screen, and now i'm connected with mtty.
Now i need
can you help me
Click to expand...
Click to collapse
If you already hardspl ur device before all u need to do is go to bootloader mode connect to computer u might have to uncheck usb connection in mobile device center and reflash an official rom or another rom

It'sd now working !!!
the problem was just to unclick the usb option in active sync.
thanks dutty and thanks robertus3d.
btw dutty inscription to your website is not working. There is a message says that cookie a deactivated which is not the case.
Anyway thank you very much.

HD blocked on 0%

Hello my HD always rest on 0% when I want to flash it !
and always rest on loading... if I want flash with my SD card
If somebody have a solution for me ? ...

what SPL u use?

do0fusz said:
what SPL u use?
Click to expand...
Click to collapse
what is spl ? I think it's v1.14
I try to install pyrana v7 or duty 1.9 but it's same

read everything here and it will answer your questions:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone

phil,
you got lucky you didn't brick you're phone..
next time, R E A D U P
effrything is explainend

do0fusz said:
phil,
you got lucky you didn't brick you're phone..
next time, R E A D U P
effrything is explainend
Click to expand...
Click to collapse
Ok but where ?
I try on my other computer under xp but same ...
I try to use spl 2.2 found on link give by mkent_barbados but I don't know how to install it ?

Ok i found i have to use sspl 1.07.Olinex, I've downloaded it but I have the same problem to install it always 0% !?

phil_rouge said:
Ok i found i have to use sspl 1.07.Olinex, I've downloaded it but I have the same problem to install it always 0% !?
Click to expand...
Click to collapse
I try to launch 1.07.olinex manualy and launch hard-spl ruu but same same same 0% nothing else

phil,
pleas read the info..
start at the wiki page.
i would be sorry to see you brick you're phone cause ý don't know what ur doing

do0fusz said:
phil,
pleas read the info..
start at the wiki page.
i would be sorry to see you brick you're phone cause ý don't know what ur doing
Click to expand...
Click to collapse
I've read all the info in wiki page, I've try olinex like it's described but I have always the same result
Before I have flash my phone and all was ok but now I can't flash again...

witch net framework are you running?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash3

Hi phil,
first, check your PC framework, as do0fusz has suggested.
Second, look at these steps:
Code:
read this if unsure how to install Hard-SPL...
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) run HardSPLWrapper_Blackstone.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is recommended,
4) follow steps in the RUU, check device for prompts after PC shows loading bar, press Yes on phone if asked. please answer with Yes as fast as you can!
5) some notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
6) device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
7) in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
8) SPL flashes, device automatically reboots, job done.
9) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.14.OliNex, which is the Hard-SPL version.
Note the point 4, expecially this "please answer with Yes as fast as you can!". When I've flashed HSPL I had the same problem like you, but after reading this carefully, all went in the right way.
Good luck

do0fusz said:
witch net framework are you running?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash3
Click to expand...
Click to collapse
I try v3.5 sp1 may be this ...

phil_rouge said:
I try v3.5 sp1 may be this ...
Click to expand...
Click to collapse
YOU WILL TRY
u clearly didn't read the wiki..
why don't you help you touch HD a little ?
if you read efferything and understood it properly this won't be a problem.
try copying SSPL-Manual-TouchHD.exe to you phone, execute it.
then try flashing again..

do0fusz said:
YOU WILL TRY
u clearly didn't read the wiki..
why don't you help you touch HD a little ?
if you read efferything and understood it properly this won't be a problem.
try copying SSPL-Manual-TouchHD.exe to you phone, execute it.
then try flashing again..
Click to expand...
Click to collapse
I read all but my english is a little bit bad so i try all i understand
I have try copying SSPL-Manual-TouchHD.exe to you phone, execute it.
then try flashing again it the same thing
I try run flash with my sd card it's same ...
now i'am installing net framework v3.5 ...

without framework v.3.5, it is N O T posible to flash..
sorry, my french is wourse then you're english

do0fusz said:
without framework v.3.5, it is N O T posible to flash..
sorry, my french is wourse then you're english
Click to expand...
Click to collapse
THANK'S I've install framework v3.5 and I can install olinex and now I can flash ! YES
But I don't understand why before I was able to flash on my computer ...

because of the standard v.2.0 effery windows haves..

All jade questions & answers & some links

BEFORE U PUT UR QUESTIONS HERE LOOK AT POST #2 I HAVE GIVEN SOME USEFUL LINKS CHEK IF UR ANSWERS ARE THEIR GOOD LUCK
Hi all
i have seen that many people are opening thread just to get answers for their specific problem they have!!!(no offense to anyone in particular) and i would like to inform to u that even though this forum is free
some one is paying for all the space we are using (space as in hdd space storage space etc...)
so lets not was threads to jut get an answer to our specific question
my humble request is before u open a thread ask ur self
1.can i get an answer to this by posting it in another thread related to this 2.is this thread useful to the others
more often than not your answer to the 2nd question is NO
I request all jade users put any questions u have regarding jade ie which cant be answered in a specific thread here so what does this do this saves space to create more useful threads for us all to use & also remember this could also become as a repository for all questions and answers on jade that the future jade users have and want answers for
And yes if u start putting ur questions here you would start getting answers cause their are many many helpful members out their who like and enjoy helping others and once they start seeing this section they would keep coming just here to help us out

some useful links for NOOBS
hi
some useful links for those who dont wana look around
1. Jade HSPL - this tool helps u to Flash any cooked ROMs
read this : http://forum.xda-developers.com/showthread.php?t=483465
read this also for jade 110 : http://forum.xda-developers.com/showpost.php?p=4060869&postcount=45
2.Rom Link Base - has most of the Orignal HTC Roms
see here : http://forum.xda-developers.com/showthread.php?t=483681
3. Custome RUU - u need this to flash roms on to ur phone
read this : http://forum.xda-developers.com/showthread.php?t=441865
4.Jade Flashing for NOOBS
read this : http://forum.xda-developers.com/showthread.php?t=514406
5. some useful applications for Jade
see here : http://forum.xda-developers.com/showthread.php?t=476493
6. SIM UN LOCKER FOR JADE : BY OLIPRO
link : http://forum.xda-developers.com/showthread.php?t=555354
7. A FEW COOKED ROMS
A. Tommy34 cooked ROM
link 1 : http://forum.xda-developers.com/showthread.php?t=524577
Link 2 : http://forum.xda-developers.com/showthread.php?t=505267
Link 3 : http://forum.xda-developers.com/showthread.php?t=525725
Link 4 :http://forum.xda-developers.com/showthread.php?t=550553 - His most recent Megade ROMS
B. Ironeagle Lean Cut Roms
Link 1 : http://forum.xda-developers.com/showthread.php?t=524102
Link 2 : http://forum.xda-developers.com/showthread.php?t=510201
C. SpaceJam Roms : Italian & English
Link : http://forum.xda-developers.com/showthread.php?t=554874
D. SELKKMAN ROMS-German & English
Link : http://forum.xda-developers.com/showthread.php?t=576641
E.kaew1995 WWE ROM
Link : http://forum.xda-developers.com/showthread.php?t=577350
8.HOW TO CHEK UR SPL NO
HI IF U WANT TO CHEK UR SPL NO WHICH IS SHOWN IN THE TRICOLOR DO THE BELOW
1POWER OFF UR PHONE
2.HOLD DOWN THE VOLUME DOWN BUTTON
3.WHILE STILL HOLDING THE ABOVE POWER ON UR PHONE
4. U WILL GET A TRICOLOR SCREE WITH UR SPL NO
5.TO RE BOOT IN REGULAR MANNER USE UR STYLUS AND SOFT RESET UR PHONE
9. HOW TO HARDRESET THE JADE(HTC TOUCH 3G)THIS IS HOW I DO IT AND IT WORKS
1.Power off the Phone
2.Press volume down button and also Press down the black center button
3. while continuing do the above Power on the phone
4. Now u will get a while screen asking u to press the volume up button
to do the hard rest press the same its done
Note : when u do Hard rest u will lose all your data so kindly take backup before doing the above
10.HOW TO FLASH ROM ON JADE FROM THE SD CARD (THANKS kurtfhouse FOR THIS INFO)
1. Rename the .nbh file of your rom of choice to JADEIMG.nbh, drop into the root of your SD card.
2.Poweroff your phone
3.hold the volume down key and while continuing to hold it power on ur phone
4. The Phone will go into the bootloader mode, and will auto detect the rom image from the SD Card and ask if you want to proceed by hitting the power button. Hit the power button and the rom will install
Note : it should take about 10-15 mins (as of now i have not tried this try at ur own risk but it works for kurtfhouse )
also make sure that ur SD card is Fat32 or format the same to Fat32 & use a smaller memory card the smaller the better
this is as per my experience using the above method on my previous phone ie gene(P3400i)
Original link go here if u want feedback on the same : http://forum.xda-developers.com/showthread.php?t=575045

1) 2.32.olinex
after flashing the above mentioned spl i cant flash back to the old 1.40
2) Now after flashing to it 2.32 i cant flash to anyROM too
Help!!! it just sits in 0% after the tri boot(red blue green)

@markchan
hi
have u done ur HSPL or have u just flashed a original ROM
im sure if u have done ur HSPL u can Flash any ROM u want
and in the same their is also a SPL back in zip form given instrution for the same given in the same thread
chek on the below link and kindly give more details while asking a quetion this will help in giving u a solution
good luck
http://forum.xda-developers.com/showthread.php?t=483465
markchan said:
1) 2.32.olinex
after flashing the above mentioned spl i cant flash back to the old 1.40
2) Now after flashing to it 2.32 i cant flash to anyROM too
Help!!! it just sits in 0% after the tri boot(red blue green)
Click to expand...
Click to collapse

Ok here is my problem.
I flashed my hard spl. now why tri colour shows this information
Jade100 64m
SPL-2.32.000
MicroP-Jade (LED) v5
Problem one is when i try to flash back to 1.40
the progress stuck at 0%
Then I ignore it tried to flash to a two new ROM
1.IoJade65-0.8_WWE.rar
2.Jade_LeanCut_Ultrafast_wm65_CE_OS.5.2.21815_OEM_2.33.721.1_Manila2d
the progress stuck at 0% too
T_T help me please am in almost in a panicky mode now.

do HSPL again @markchan
hi
ur spl should show 2.32.olinix
i dont know how ur spl is showins as u mentioned
i sugest pls do the HSPL again or chek ur spl again may be u have read it wrong see my sign i have mentioned my spl this should be urs after hspl
do this
power off the phone
press volume down button and then power on the phone u will get tricolor with spl chek the details if the spl is as u say and not 2.32.olinex then u have not done HSPL do it and u can flash any ROM i have done it and i have flashed more than a dozen Roms
note : while doing hspl u need live net connection and turn off ur firewall and antivirus while doing it
good luck
markchan said:
Ok here is my problem.
I flashed my hard spl. now why tri colour shows this information
Jade100 64m
SPL-2.32.000
MicroP-Jade (LED) v5
Problem one is when i try to flash back to 1.40
the progress stuck at 0%
Then I ignore it tried to flash to a two new ROM
1.IoJade65-0.8_WWE.rar
2.Jade_LeanCut_Ultrafast_wm65_CE_OS.5.2.21815_OEM_2.33.721.1_Manila2d
the progress stuck at 0% too
T_T help me please am in almost in a panicky mode now.
Click to expand...
Click to collapse

i think maybe because of the internet connection will need to try at home
currently i am in my office where proxy is being use here.
Thanks bro will update this post tonight.

yes try at ur home
hi
yes i sugest that u try at ur home and the process does give a problem when
ur at Proxy dont worry its very easy u will suceed i did it the first time and im new jade user too mine is less than a month old
goodluck and do post ur success here when its done
REMEBER : turn off ur firewall and virus when u do the process OK
markchan said:
i think maybe because of the internet connection will need to try at home
currently i am in my office where proxy is being use here.
Thanks bro will update this post tonight.
Click to expand...
Click to collapse

Yes it is confirmed! that you need the internet connection in order to complete it.
Guess proxy is not working for the SPL.
Thanks bro.
But as to date which ROM is the best i tested IOD and lean cut both of them not working properly (for 6.5)

u can try this one
hi
i have Provided a Pdaviet ROM i like it and u can also see that many who have use it also like it this is ony provided by me OK
markchan said:
Yes it is confirmed! that you need the internet connection in order to complete it.
Guess proxy is not working for the SPL.
Thanks bro.
But as to date which ROM is the best i tested IOD and lean cut both of them not working properly (for 6.5)
Click to expand...
Click to collapse

Hi Hari.
I have been going through all the threads and i recently upgraded to the new ROM for my 3G. (Official one). Actually, I use Jabra bluetooth headset with my phone. When the voice command is running in the background, the phone does not go into power saving mode. i.e. the screen does not switch off.. Can you please check the same with your ROM. Not sure if its ROM issue or something else.
If the voice command is running in the background, the phone screen does not go into sleep mode.
Any help would be appreciated.
Cheers!!
Saurabh

hi
yar i dont seem to have an aswer to this problem as i have not used any blue tooth with my phone but in the setting if u unckek the auto setting for the screen u can set it as per your req try doing the same
hope it solves ur problem
if any one else has a solution kindly advise
saurabhsrivastava said:
Hi Hari.
I have been going through all the threads and i recently upgraded to the new ROM for my 3G. (Official one). Actually, I use Jabra bluetooth headset with my phone. When the voice command is running in the background, the phone does not go into power saving mode. i.e. the screen does not switch off.. Can you please check the same with your ROM. Not sure if its ROM issue or something else.
If the voice command is running in the background, the phone screen does not go into sleep mode.
Any help would be appreciated.
Cheers!!
Saurabh
Click to expand...
Click to collapse

TFL3D for Jade
Hi guys,
Is it possible ot have TFL3D for Jade/touch 3G? If yes, then can anyone direct me to the post/thread.
I am running the latest official version of 3G ROM
Thanks
Saurabh

@saurabhsrivastava NO
hi
No this not posible im not sure but i think TFL3d is harware related
dont know the exact tech reason but do know that it is not posible
saurabhsrivastava said:
Hi guys,
Is it possible ot have TFL3D for Jade/touch 3G? If yes, then can anyone direct me to the post/thread.
I am running the latest official version of 3G ROM
Thanks
Saurabh
Click to expand...
Click to collapse

Thanks a lot Haree

Hi Haree...
Since This hTC Jade Has No Secondary Camera, Any Other Way for Me To Make Videocall ?... (Webcam As External Device Maybe....)
Thanks

Sorry For Double Posting

Well my Jade has two problems right now, since I've updated his ROM, I think.
1. When it's charging (standby mode) it only charges to 50-60% and the light is always orange. But after a soft reset it appears immediatly 100% and the light turns to green.
2. While it's in standby mode it doesn't vibrate when receives a SMS, only blinks the green light.
So... Problems with standby mode?

@blackaos
hi
if u have updated the Pdaviet ROM the SMS will only blink by default u need to got to sound setting and change the same as per ur requirement
in terms of ur charging problem im sorry i dont have a solution
u can try a hard reset
if any one has any solutions kindly advise
blackaos said:
Well my Jade has two problems right now, since I've updated his ROM, I think.
1. When it's charging (standby mode) it only charges to 50-60% and the light is always orange. But after a soft reset it appears immediatly 100% and the light turns to green.
2. While it's in standby mode it doesn't vibrate when receives a SMS, only blinks the green light.
So... Problems with standby mode?
Click to expand...
Click to collapse

@Robxl Rose
hi
yes this is a problem we have to live with that the jade has only one camera so doing video chat is gona be difficult i relay dont have a solution but their is a mini USB to 3.5 adapter available may be u can try the same and see if u can connect to a external USB webcam this is just my suggestion thats all i dont know if this will work
Robxl Rose said:
Hi Haree...
Since This hTC Jade Has No Secondary Camera, Any Other Way for Me To Make Videocall ?... (Webcam As External Device Maybe....)
Thanks
Click to expand...
Click to collapse

How to downgrade to wm6.1?

hi guys, i've been using wm6.5 for some times, but i think there's some problem with my x1, and i need to install back to it's original wm6.1 before i take it to the service centre.
could anyone help me on how to downgrade my phone to wm6.1? i appreciate much for sharing some information

Hi,
I have not tested it myself, but my first suggest would be to use the offical upgrade tool from sony Erricson.
Would be greate if you could tell us if it worked.

cannot. it says that my phone already has the latest version.
anyone please help?

kavacz said:
cannot. it says that my phone already has the latest version.
anyone please help?
Click to expand...
Click to collapse
download this:http://rapidshare.com/files/238466530/APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.exe then 2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction

mmmm ... i think he also need to restore original SPL ?

deepthroat said:
mmmm ... i think he also need to restore original SPL ?
Click to expand...
Click to collapse
not narrow this makes everything!
just flashing on the manner written down and ready. tested.

thanks guys. downloading now

oliolioli said:
not narrow this makes everything!
just flashing on the manner written down and ready. tested.
Click to expand...
Click to collapse
yeah, but when he wants to bring it to the service center he schould restore original spl. so flash an original rom then flash stock spl and then flash again an original rom. that should do the trick.

kavacz said:
thanks guys. downloading now
Click to expand...
Click to collapse
your feedback would be highly appreciated

i already flash it with stock .72, should i flash it with original rom again?
and where can i download it?

update success! using the file from oliolioli. thank u so much guys!

kavacz said:
update success! using the file from oliolioli. thank u so much guys!
Click to expand...
Click to collapse
I am glad that he succeeded and how I may have helped!I put up the original software from a card next first it stock spl and like this perfectly factory state!

hey guys.. i try to recover my x1 from 6.5 back to 6.1 but i need an german rom and the original hard spl... any idea where i can get it from?
greetz =)

Hspl error check THE picS

HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help

SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
Might have been more help asking in the hspl thread but nevermind . Try a different cable (most mini usb cables will do)

SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
no need to go crazy, this can be fixed.
you shouldn't enter the bootloader yourself, it won't flash that way.
what error did it say in automatic mode?

syrian
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl

SYRIAN4E said:
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
Click to expand...
Click to collapse
ok did you turn firewall off? turn proxy off too, if you have a proxy.
if that doesn't sort it, I can still help you if you message us via this link: http://support.htc-unlocks.com/

syrian
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend

SYRIAN4E said:
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
Click to expand...
Click to collapse
you shouldn't enter the bootloader like that, the flash won't work that way.
I replied to your priv. message

syrian
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B

SYRIAN4E said:
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
Click to expand...
Click to collapse
the screenshots are very helpful in seeing what your problem is.
ok, after 3rd step now try copying Manual SSPL exe (link: http://forum.xda-developers.com/attachment.php?attachmentid=232407&d=1254155476) on the phone, run it, it should then show SSPL screen on the phone. then use the Manual flash mode on the PC. let me know if it works that way

syrian
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture

SYRIAN4E said:
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
Click to expand...
Click to collapse
what do you see on the phone screen at this point?

syrian
nothing just the file maneger when i launch the manual sspl cuz the device lag

SYRIAN4E said:
nothing just the file maneger when i launch the manual sspl cuz the device lag
Click to expand...
Click to collapse
ok you did step "3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK"
and then you run the manual sspl EXE on the phone, it still lags ?
I'm asking to make sure you did not do a hard reset or anything (I mean, don't do hard reset)

syrian
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use

SYRIAN4E said:
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
Click to expand...
Click to collapse
ok one last check.. send me a screenshot of your phone showing the IMEI to make sure it's OK.
but do not post the screenshot publicly, send it in private message.

syrian
come on xda help me lol

SYRIAN4E said:
come on xda help me lol
Click to expand...
Click to collapse
alright I realized that the second file was the wrong version. I sent you the correct file in PM, let me know if it worked

syrian
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E

SYRIAN4E said:
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
Click to expand...
Click to collapse
glad to help. as I said, the manual SSPL in the thread was the wrong version. I forgot to update it at one point, will add it in the thread now. (most people can just go and use automatic mode so nobody noticed there was an issue with the file.)

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4 .49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?